SCHOOL BASED APPRENTICESHIPS. On the job training, NO block training, NO downtime, build on your future

Transcription

1 STAYSAFE NEWS APPRENTICESHIPS SCHOOL BASED APPRENTICESHIPS Fee-free training for Year 12 grads, new worker, existing worker subsidised training On the job training, NO block training, NO downtime, build on your future This qualification provides a trade outcome in plumbing, plumber and gas fitter, plumber and drainer, gasfitter covering a range of work including: water, sanitary, drainage, and gas services. To apply for a plumbing and drainage license with the Queensland Building and Construction Commission completion of this qualification as well as selected units of competency from the Certificate IV in Plumbing and Services as indicated in the plumbing and drainage scope of work document found at this link To achieve this qualification you must complete core and elective units from these streams. We have elected Stream 1 Water, Stream 2 Sanitary, Stream 3 Drainage and Stream 6 Gas Services which will make up the qualification to be undertaken. Stream 1 Water and Stream 2 Sanitary are mandatory. The following units of competency are required for award of this qualification: Stream 1 Water (mandatory): 24 core units and 5 elective units from the water stream and Stream 2 Sanitary (mandatory): 6 core units and 4 elective units from the sanitary stream. Streams selected for this qualification include: Stream 3 Drainage: 9 core units and 3 elective units from the drainage stream Stream 6 Gas services: 12 core units and 5 elective units from the gas services stream NB: Units of competency achieved in one stream count as credit for the same unit in the core or elective requirements for any other stream. Some units in this qualification may have prerequisite which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose. Recognition of prior learning (RPL), gap training, credit transfer and duration is determined at pre-enrolment. Sequence of training and assessment is recorded in a training plan. Eligibility for new and existing worker To be eligible to receive subsidised training under the User Choice program you must: be employed in an approved apprenticeship or traineeship have entered a training contract for a qualification funded by the government have selected a training provider that is a pre-qualified supplier (a government-approved training provider). Eligibility for fee-free training have completed Year 12 in Queensland and hold a Senior Statement issued by the Queensland Curriculum and Assessment Authority or equivalent certification enrol and start training with an approved training provider by the end of the calendar year following your completion of Year 12 be a Queensland resident. Probation period The probation period is 90 days from the commencement of an apprenticeship Apprenticeship start The apprenticeship or traineeship starts once the training contract, training plan, pre-enrolment and enrolment has occurred. QLD Multiple Government contribution Copy this link into your browser staysafeindustrytraining.com.au/multiple-government-contribution C a l l T o d a y! This qualification is funded by the Queensland Government QUALITY TRAINING ON THE JOB Apprenticeships and traineeships are months duration. You are required to pay a student contribution fee of $1.60 per nominal hour, however you can apply for a partial or full exemption of these fees at enrolment. Staysafe Industry Training offers a variety of quali ications. contact@sitedu.com.au staysafeindustrytraining.com.au 1690 David Low Way, Coolum Beach, QLD 4573 RTO # 40963

2 Apprenticeships - School Based Apprenticeships Fee free training for year 12 grads CPC32413 Certificate III in Plumbing Units of competency from a minimum of four of the following six plumbing streams are required for award of this qualification. Stream 1 Water and Stream 2 Sanitary are mandatory. The following units of competency are required for award of this qualification: Stream 1 Water (mandatory): 24 core units and 5 elective units from the water stream and Stream 2 Sanitary (mandatory): 6 core units and 4 elective units from the sanitary stream. Plus two of the following four streams: Stream 3 Drainage: 9 core units and 3 elective units from the drainage stream Stream 4 Mechanical services: 4 core units and 11 elective units from the mechanical services stream Stream 5 Roofing: 8 core units and 4 elective units from the roofing stream Stream 6 Gas services: 12 core units and 5 elective units from the gas services stream NB: Units of competency achieved in one stream count as credit for the same unit in the core or elective requirements for any other stream. Some units in this qualification may have prerequisite which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose. UNIT CODE UNIT TITLE Yes (Tick box) CPCPCM2043A CPCCCM2008B CPCCCM3001C units Work safely at heights, Carry out WHS requirements construction industry Erect and dismantle restricted height scaffolding Work safely at heights Operate elevated work platforms Page 1 of 4

3 CPCPCM2039A CPCPCM2040A CPCCPCM2041A CPCPCM2045A CPCPCM2046A CPCPCM2047A CPCPCM2050A CPCPCM2052A CPCPCM2053A CPCPCM2054A CPCPCM2055A CPCPCM3021A CPCPCM3022A CPCPCM3023A CPCPFS3031A CPCPWT3020A CPCPWT3021A CPCPWT3022A CPCPWT3023A CPCPWT3025A CPCPWT3026A CPCPWT3027A HLTFA211A Carry out interactive workplace communication Read plans and calculate plumbing quantities Work effectively in the plumbing and services sector Handle and store plumbing materials Use plumbing hand and power tools Carry out levelling Mark out materials Weld using oxy-acetylene equipment Weld using manual metal arc welding equipment Carry out simple concreting and rendering Work safely on roofs Flash penetrations through roofs and walls Weld polyethylene and polypropylene pipes using fusion method Fabricate and install non-ferrous pressure piping Fabricate and install fire hydrant and hose reel systems Connect and install storage tanks to a domestic water supply Set out and install water services Install and adjust water service controls and devices Install and commission water heating systems Install water pumpsets Fit off and commission heated and cold water services Connect irrigation systems from drinking water supply Provide basic emergency life support (this unit to be completed with St Johns or another First aid provider) Stream 1 Water elective units - 5 CPCPCM2049A CPCPRF2023A CPCPWT3028A Cut using oxy-lpg-acetylene equipment Collect and store roof water Install water services Work safely at heights Stream 2 Sanitary mandatory units - 6 Page 2 of 4

4 CPCPDR2021A CPCPSN3011B CPCPSN3022A CPCPSN3023A CPCPSN3024A Locate and clear blockages Plan layout of a residential sanitary plumbing system Install discharge pipes Fabricate and install sanitary stacks Install and fit off sanitary fixtures Stream 2 Sanitary elective units - 4 CPCPDR2022A CPCPDR2023A CPCPSN3026A CPCPDR2026A Install domestic treatment plants Maintain effluent disinfection systems Install sewerage pumpsets Install prefabricated inspection openings and closures Stream 3 Drainage mandatory units - 9 CPCPDR2021A CPCPDR2022A CPCPDR2024A CPCPDR2025A CPCPDR2026A CPCPDR3021A CPCPDR3022A CPCPDR3023A RIICCM210D Locate and clear blockages Install domestic treatment plants Install stormwater and sub-soil drainage systems Drain work site Install prefabricated inspection openings and enclosures Plan layout of a residential sanitary drainage system Install below ground sanitary drainage systems Install on-site disposal systems Install trench support Stream 3 Drainage elective units - 3 CPCPDR2023A CPCPSN3025A CPCPWT3029A Maintain effluent disinfection systems Install pre-treatment facilities Install water pipe systems Stream 6 Gas services mandatory units - 12 CPCPGS3046A CPCPGS3047A CPCPGS3048A CPCPGS3049A CPCPGS3051A Install LPG systems in caravans, mobile homes and mobile workplaces Install LPG systems in marine craft Install gas pressure control equipment Install Type A gas appliance flues Purge consumer piping Page 3 of 4

5 CPCPGS3053A CPCPGS3054A CPCPGS3056A CPCPGS3057A CPCPGS3058A CPCPGS3059A Disconnect and reconnect Type A gas appliances Calculate and install natural ventilation for Type A gas appliances Install gas piping systems Size consumer gas piping systems Install and commission Type A gas appliances Install LPG storage of aggregate storage capacity up to 500 litres Stream 6 Gas services elective units - 5 CPCPGS3052A CPCPGS3055A CPCPMS2021A CPCPMS3031A RIICCM210D Maintain Type A gas appliances Install gas sub-meters Assemble mechanical services components Fabricate and install steel pressure piping Install trench support Modification and review Date 17/11/2016 Version 1.2 RTO code ABN Page 4 of 4