FenderCare Rope & Rigging

Transcription

1 Everything you need from seabed to quayside

2 Oceanmoor Polypropylene Co-polymer Oceanmoor Polypropylene Co-polymer 3 and 4 Strand Oceanmoor high tenacity co-polymer rope combines a higher breaking strength with dimensional stability, an economical option to staple PP and polyamides. It is manufactured in 3, 4, 8 and 12 strand, to cover a wide range of applications throughout shipping, fishing and other industries. Abrasion resistant UV stabilised Specific gravity floats Colour - Red with black marker strands Melting point 165 C Excellent chemical resistance to acid & alkali 8 & 12 strand supplied with protected eye each end Certification - 3 & 4 strand - certificate confirming MBL 8 & 12 strand - Germanischer Lloyd 3rd party certificate 4 ½ ¾ ¼ ½ ¾ ¼ ½ ¾ ¼ ½ ¾ ¼ ½ ½ ½ ½ ½ ½ ½ ½ ½ ½ s up to 144mm diameter specifications available upon request

3 Oceanmoorflex Polypropylene / Polyester Oceanmoorflex high tenacity polypropylene rope combined with polyester yarn supplies a higher breaking strength with increased abrasion resistance and a lower elongation with dimensional stability. It is manufactured in 8 strand, to cover a wide range of applications throughout the shipping industry. Oceansupaflex high tenacity polyester/ polypropylene composite fibre supplies a higher breaking strength with superior abrasion resistance, lower elongation with dimensional stability. It is manufactured in 8 strand, to cover a wide range of applications throughout the shipping industry. Oceansupaflex Polyester / Polypropylene Superior abrasion resistance UV stabilised Specific gravity floats Polypropylene 60% / Polyester 40% Colour - orange with black & red tracer yarn to strands Melting point 185 C Excellent chemical resistance to acid Supplied with protected eye each end Certification - Germanischer Lloyd 3rd party certificate ½ ½ ½ ½ ½ ½ ½ * Manufactured in accordance with OCIMF guidelines TCLL value of 73% Excellent abrasion and frictional heat resistance with low elongation Specific gravity 1.1 neutrally buoyant Polyester 55% / Polypropylene 45% Melting point 175 C Colour - white with black and red tracer yarn to strands Excellent chemical resistance to acid Supplied with protected eye at each end Certification - Germanischer Lloyd 3rd party certificate ½ ½ ½ ½ ½ Note: The MBL should never be considered as the safe working of rope. For the method of calculating safe working please refer factor of safety = force/6. s up to 144mm diameter specifications available upon request * 200 metre max length

4 Oceanlon Nylon Oceantex Polyester Oceantex polyester ropes have high strength and excellent abrasion resistance giving extreme durability ½ / It is manufactured in a variety of constructions to cover a wide range of applications throughout shipping, fishing and other industries ½ Oceanlon Nylon (Polyamide) ropes have high strength and extreme durability, yet extremely soft and easy to handle. Especially useful where peak dynamic ing and high energy absorbing ability is called for, such as towing and some mooring applications. It is manufactured in a variety of constructions to cover a wide range of applications throughout shipping, fishing and other industries ½ ½ ½ ½ ½ ½ 1110* * * 92mm 200 metre & 96mm 190metre ½ ½ ½ ½ ½ ½ Excellent abrasion resistant High strength Specific gravity sinks Melting point 215 C Supplied with protected eye each end. Certification - Germanischer Lloyd 3rd party certificate Excellent abrasion resistant High strength Specific gravity-1.38 sinks Melting point 256 C Extremely resistant to UV Supplied with protected eye each end Certification - Germanischer Lloyd 3rd party certificate ½ * * 96mm 200 metre

5 Oceandyn UHMPE Atlas Nylon 6 ¾ ¼ ½ ¾ ¼ ½ Oceandyn UHMPE (ultra high modulus polyethylene) Dyneema offers breaking strengths greater than steel wire rope for similar diameters but with a significant weight reduction, only 10 14% the weight of equivalent wire rope. This makes HMPE ropes a lot more flexible and easier to handle than wire ropes with similar elastic elongation properties but a better fatigue life. Dyneema has a very low elongation factor, 3% at breaking point, so little stored energy. It can be supplied in a range of constructions and overbraided with a variety of materials to produce a rope suitable for different applications. Atlas ropes have 6 strands manufactured from Nylon. Mono and multi-filaments combined in the strands. The mono-filaments give the ropes excellent dimensional stability and abrasion resistance. The splicing technique for Atlas is very similar to wire rope. The stretch of the nylon in combination with the dimensional stability makes these lines ideal for mooring, especially on a constant-tension winch ¾ ¼ ½ ¾ ½ ½ ½ ½ ½ ½ Superior abrasion resistance Extreme strength Low elongation (low snap back) ular braid finish for drum spooling Melting point 145 C Excellent resistance to chemicals* Unaffected by UV* Specific gravity 0.97 floats * Dyneema bearing core is unaffected but sheathing, depending on material, could be affected. 6 Strand 220mt coil 18 2 ¼ ½ ¾ ¼ ½ ½ ½ ½ ½ / ½ ¾ ¾ ½ ¾ Material: 100% high tenacity nylon (mono and multi-filament) Construction: 6 strand crosslay Colour - white with a red marker yarn Excellent abrasion resistance Shock absorption UV resistant Specific gravity sinks Melting point 215 C

6 Mooring Hawsers Polyamide Braid Material - Polyamide (nylon) Construction - 12 strand braided with a braided cover of polyamide Treatment - marine finish Colour - white with green marker Approx spec density - 1,14 non floating Melting point C Abrasion resistance - excellent UV resistance - excellent due to jacket Temperature resistance - 80 C max continuous Chemical resistance - reasonable; acids, oxidisers & solvents will affect nylon Dry & wet conditions - wet strength ± 5% lower than dry strength Cir Wt. Per BL Single BL Grommet KG dry wet dry wet 100m tf kn tf kn tf kn tf kn Break and length according to OCIMF ± 5% meter ±2% The rope is a circular braid design developed to give the rope extra protection against wear and tear, without significantly changing the primary characteristics. It is a logical development from the double braid, where the outer protects the inner and both contribute to the strength. In circular braided rope design this duality has been abandoned. The cover is optimised for wear and abrasion resistance and the core optimised for strength. This results in both a higher strength and a better life expectancy. Mooring Hawsers PP / PES Composite Composite fibre based on a propriety PP yarn and polyester as a strength member. It combines the excellent fatigue characteristics and abrasion resistance of polyester with the low density of nylon. The fatigue life is comparable to pure polyester, but the weight for a given strength is comparable to nylon, giving excellent handling characteristics. A special marine finish is applied to further increase the wear resistance in a marine environment. Wet and dry strengths are identical. Material - high tenacity PP yarn and high tenacity polyester Construction - 8 strand plaited Treatment - marine finish Colour - white with a two colour marker (orange and blue) in one strand Approx spec density non-floating Melting point C / 260 C Abrasion resistance - excellent UV resistance - good Temperature resistance - good. Solvents and strong oxidisers may have a mild affect Dry & wet conditions - wet strength equals dry strength Single point mooring hawsers are manufactured in accordance with OCIMF 2000 regulations The construction and requirements of individual hawsers vary with location, depending on operational procedures and regional conditions. can provide a tailored package, a comprehensive range of equipment for all mooring systems, wherever required. We can also supply complete assemblies for initial installations or separately as spare parts. Mooring hawsers Messenger lines Support buoys Pick-up ropes Chafe chains Quick release hooks Mooring hardware Shackles and associated fittings Cir Wt. Per BL Single BL Grommet KG 100m tf kn tf kn Break and length according to OCIMF ± 5% meter ±2%

7 Tough products for tough conditions Rigging equipment Shackles Thimbles and links Sockets Pelican hooks Quick release hooks Lifting slings chain, wire and webbing Wire rope Towtectors towline protectors Fendering Largest Yokohama fender stockists in the world Yokohama approved repair & refurbishment facility Pneumatic rubber fenders Chain & tyre nets Naval fendering Dock & tug extruded fendering Cylindrical fenders Buoys Design and manufacture of buoyancy and floatation solutions Navigation buoys GRP mouldings Beacons and lights Chain support buoys Anchor pendants Emergency towing equipment - OCIMF compliant Smit brackets Panama bow fairleads Chain stoppers Marine hardware Anchors Stud link chain Mooring chain Connectors including:- Kenter, pear links, joining & anchor shackles Swivel forerunners Wire and chain chasers Sinkers Grapnels Winches and spooling machines Marine operations Ship to ship transfer (STS) Emergency lightering operation Mooring Masters for STS, FPSO/FSO berthing operations SPM installations Consultancy for port development Deck mooring equipment Bollards Chain stoppers Deck sheaves Deck rollers Multi angle fairleads Multi angle swivel head fairleads Quay-side mooring equipment Mooring bollards Triton - Twin horn T head - Pillar Quick release mooring hooks Enterprise House Harveys Lane Seething Norfolk NR15 1EN Tel: Fax: ropesales@fendercare.com Marine Products (Asia Pacific) Pte Ltd No 4 Sixth Lok Yang Road Singapore Tel: Fax: ropesales@fendercaresingapore.com Middle East LLC PO Box Sharjah UAE Tel: Fax: ropesales@fendercaremiddleeast.com Do Brazil Rua 01 s/n Lt.113 Qd.01 Rio das Ostras RJ Cep Brasil Tel: Fax: ropesales@fendercarebrazil.com Nigeria Ltd 41 Creek Road Apapa Lagos State Nigeria Tel: Fax: ropesales@fendercarenigeria.com (China) Ltd No 2 Building, Haicheng Industrial Park No 2 Haicheng Road Yanjiang Development Area Changshu P.R China Tel: ropesales@fendercarechina.com Stock available across the globe For further information, call any of our worldwide bases or visit our website at: