Sound insulation technology

Transcription

1 CAVITY WALL WALL CAVITY Sound insulation box for use in walls with increased demands on sound protection. The solid box body with additional sound insulation sheathing absorbs and reflects sound, which prevents disturbances in adjacent rooms. Sound insulation is the same as if no installation boxes were installed. CONCRETE Maintains the wall s sound insulation protection Also for retrofitting Installation up to 5-unit combinations Also for opposing installation Can be used with sound protection cover as a junction box INNOVATION halogenfree available Example of installation of a switch/socket combination. Use of an opposing sound insulation box. Use of a sound insulation box on one side of a double combination. The sound insulation box can be used in up to five opposing combinations without weakening the sound insulation characteristics of the wall. EARTHING Lightweight wall (-shell, each triple-boarded) with sound insulation one-gang junction boxes FIRE protection HOUSINGS Examples of use CAbLE GLANdS Hz SERVICE Wall, without installations, 77 Sound insulation box , single, with accessory, 77 Sound insulation box , single, with cover, 77 Sound insulation box , 5-way, with accessory, 77 TOOLS 6 8 EIK_GB#07_HW.indd :5

2 Lightweight wall (two-shell, double-boarded in each case) with sound insulation one-gang junction boxes Hz Wall, with no installations, 5 Sound insulation box , single, with accessory, 5 Sound insulation box , single, with cover, 5 One-gang junction box 906-0, single, with accessory, 8 Lightweight wall (two-shell, double-boarded in each case) with sound insulation one-gang junction boxes Hz Wall, with no installations, 5 Sound insulation box , fivefold, with accessory, 5 One-gang junction box 906-0, fivefold, with accessory, 8 Installation Use a cutter (e.g. Multi 000: 08-0) to make a Ø 7 mm opening. For combinations, cut off the marked edge strip. Installation then proceeds as with a conventional cavity wall box. Secure and fast installation thanks to KAISER FX technology. Accurate entries ensured by the universal opening cutter, Combinations at a standard spacing of 7 mm. Tight and fully-insulated through-wiring is ensured by the support connector. With the sound-insulation cover, the box can also be used as a junction box. 8 EIK_GB#07_HW.indd :5

3 Sound-insulation box One-gang junction box for sound insulation walls in buildings Combination distance of 7 mm through single separation of the pre-embossed edge 7-0 mm 5,5 mm 7 mm mm / / 00 CONCRETE 7-0 mm 5,5 mm 7 mm mm 5 - HOUSINGS For panel thickness Depth Cut hole Ø Fixing screw spacing Cable entries of up to Ø.5 mm Support connectors for each package CAVITY WALL WALL CAVITY Sound insulation cover FIRE protection for sound insulation box Sound insulation function in conjunction with sound insulation box Diameter 9 mm / 00 EARTHING Support connector / / 5 Allocation table for universal opening cutters Cavity wall installation for sound insulation boxes NYM cable Ø setting x,5 mm 8,5 5 x,5 mm 9,5 x,5 mm 9,5 Support connector Connector Connector, halogen-free You can create cable entries with the prescribed strain relief easily and to the exact required size with the universal opening cutter (Art No ). TOOLS CAbLE GLANdS for through-wiring of combinations to IP X standard air-tight for 555-5, , SERVICE 8 EIK_GB#07_HW.indd :5

4 Sound insulation electronics box NEW Sound insulation electronics box for use in walls with increased demands on sound insulation. The sound insulation electronics box maintains the wall s sound insulation function and creates space for electronic switching devices, data boxes, cables and terminals. The electronics box makes possible population with cables and installation conduits up to M5. Maintains the wall s sound insulation protection Retrofitting is possible Also for use as a double box Extra-large terminal area for communications and network technology Additional space for electronic components (KNX actuators, relays, radio module, communications technology) halogenfree available INNOVATION Examples of use The electronics box provides space for all possible installations e.g. KNX actuators, Venetian blinds relays, alarm modules and many more. Also ideal for network connections. The generous box volume offers sufficient space for cable reserves. The electronics box can also be used as a double box, e.g. for switch and socket combinations. The electronics box can easily be combined with the sound insulation device junction box. There are also 6 ways for cable entry up to Ø.5 mm. By removing the cover and the bridge, can also be used as a double box. Processing instructions The electronics box provides 6 ways for conduit entry up to M5 and cable entry up to Ø.5 mm. 8 EIK_GB#07_HW.indd :5

5 Installation Cut two installation openings with turbo cutter Multi 000 Ø 7 mm ( 08-0) with a centre distance of 7 mm. The additional terminal area makes possible the fitting of various electronic components... Sound insulation electronics box Electronics box for sound insulation walls in buildings Also for use as a double box For equipment inserts and electronic components Can be combined with each other and also with a sound insulation one-gang junction box Removal of the bridge. Using the KAISER universal opening cutter, cut an exact conduit or cable opening for air-tight installation.... and creates sufficient space for the cable reserve when communications and network boxes are installed. For panel thickness 7-0 mm 7-0 mm Depth 70 mm 70 mm Cut hole Ø x 7 mm x 7 mm Centre distance 7 mm 7 mm Conduit entries for DIN EN conduits up to Ø 5 mm Cable entries of up to Ø.5 mm Support connectors for each package / 00 0 / 00 By using support connectors, the box can be combined with itself or with a sound insulation box ( ). Fitting the box using tried-andtested FX technology. The cover can also be fitted turned 80 and filled. SERVICE TOOLS CAbLE GLANdS EARTHING FIRE protection HOUSINGS CONCRETE CAVITY WALL 85