100% accessibility Slatted Modules Up to 2400 long slats Unique BCA Fire Group 1 Options Australian Made

Transcription

1 Premium Fully Accessible Slatted Ceiling System 100% accessibility Slatted Modules Up to 400 long slats Unique BCA Fire Group 1 Options Australian Made

2 Why SUPATILE SLAT? SUPATILE SLAT is the latest addition to SUPAWOOD s popular SUPATILE family of products developed to fit into the traditional -way T-bar grid ceiling system. Both decorative and sound absorbent, SUPATILE SLAT will quickly and easily transform any area with an up market timber or linear look. Key features: 100% access to ceiling cavity Simple to specify Quick and easy to install Can fit existing ceiling grids with Drop-In fixing option Panel lengths up to 400 with Lift & Shift fixing option Quick & easy fit-out solution Attractive range of slat profiles Multi-directional effects possible Fire Resistant and Green options Front cover: SUPATILE SLAT and custom Random Lift & Shift in Clear used to throughout the ceilings of a TAFE library and study areas. Left from top: SUPATILE SLAT Lift & Shift in DRIFTWOOD Clear Vic Ash forms an interesting centre feature in the ceiling of a corporate HQ office area. SUPATILE SLAT Lift & Shift option 5 in DRIFTWOOD Black forms a striking ceiling in a corporate HQ reception and hallway. SUPATILE SLAT Lift & Shift option 5 in SUPA Tasmanian Oak defines the areas of a university science faculty study area. SUPATILE SLAT DIT in Clear DRIFTWOOD Drop-In-Tile option in the reception of a memorial museum. Below: SUPATILE SLAT 5 DIT in SUPA White & SUPACOLOUR Yellow enhance the decor colour scheme of a staff lounge area.

3 Premium Fully Accessible Slatted Ceiling System Fixing Options SUPATILE SLAT panels come in two fixing options. Lift & Shift (L&S) is supplied with SUPAWOOD s own SUPATILE grid system. DIT (Drop-In Tiles) are designed to fit into an existing grid system. Panel to Panel Panel to Panel - end to end Grid Requirements: Grid is to be SUPATILE GRID with main runners installed at 600mm centres with 600mm cross-tees at 100 or 600mm centres. When installed as per SUPAWOOD's instructions the SUPATILE Grid will support any SUPATILE Slat configuration. Other Special Features: 5mm end-to-end joints Standard panels sizes available 100 x x x x x 600 SUPATILE Slat L&S panels can cross over T-bars, which means a 600 x 600 SUPATILE Grid layout can be used to create a truly random panel layout. DIT Drop-In-Tile Panel to Panel Panel to Panel - end to end 5mm end-to-end joints Standard panels sizes available 100 x x x 300 Grid Requirements: Existing grid may be repainted (enamel paint recommended) and used but must be able to support the weight of the tiles as well as the service load factors as prescribed in the AS785. Refer to Supawoods Technical Services Department for tile weights. What is required to achieve this will depend on the specific brand, system and configuration currently installed. Typically additional support would be expected to consist of additional hanger supports but the contractor is to take independent advice on this from the supplier of the grid. Left from top: SUPATILE SLAT Lift & Shift in Clear along walkways on the levels of an atrium. SUPATILE SLAT Lift & Shift in SUPA Tas Oak. SUPATILE SLAT 4 DIT in SUPA Hoop Pine.

4 The Range Colour Ranges available Fixing System available Profile 1 Open area 37% Typical weight 11kg/m VENEER Profile VENEER Open area 0.8% Typical weight 13kg/m Profile 3 Open area 58% Typical weight 1kg/m Profile 4 4 Open area 57% Typical weight 15kg/m Profile 5 DROP IN: : 50x18mm cross battens on max 600 centres VENEER Open area 76% Typical weight 15kg/m Note that the sizes above are nominal and will vary depending on finish type selected.

5 AUS NZ UK Concept Veneers & Colours Hoop Pine SF Fusion Maple SF Euro Beech SF Tasmanian Oak SF Blackbutt SF Spotted Gum SF Smooth Mahogany SF Cracked Cherry SF White SF Black SF VENEER Natural Timber Veneer or any other species Tasmanian Oak ¼ Blackbutt Spotted Gum American Walnut Your Choice NOTE: DRIFTWOOD is a special rustic finish. The Rustic Timber Lining Please refer to the DRIFTWOOD brochure for features to be expected... click here Driftwood Clear Vic Ash Driftwood White Driftwood Black Driftwood Whitewashed Driftwood Blackwashed Natural Timber COLOUR -pack This shows the range of colours that can be expected with cedar....love the colour variation in the timber. LH - KPA, Perth Match to any colour reference Other custom finishes are also available. Please contact our customer service team on Colours shown in these swatches are a guide only and actual will vary from panel to panel. Driftwood and Cedar finishes in particular are natural products and there will be variations between slats..au

6 Premium Fully Accessible Slatted Ceiling System Suggested Specification Wording Ceiling to be SUPATILE SLAT slatted ceiling system. Panels to be SUPATILE [select option number or Random] with [Drop in/ Lift & Shift] fixing option. Panel finish type to be [SUPA Concept Veneer/ SUPAVENEER Natural Timber Veneer/ Driftwood/ Western Red Cedar/other Solid Timber species] in [specify colour here]. Grid finish to be black and installed as per requirements below. Typical panel size to be [100x600/600x600/.../ as shown on RCP]. [Delete whichever not applicable:] Panels to have, integrated acoustic textile pre-attached/ Lay HP50 Jet Black bulk insulation over ceiling panels/ Ceiling and all services above to be painted out black. Panels to be Fire Group 3 / / 1 [delete as required] per BCA Specification C1.10 clause 4. [Note that fire groups 1 is only available in the SUPA finish type and Group in SUPA and SUPAVENEER.] Panel installation to be as per manufacturer's instructions and AS/NZS 785. [delete whichever of the following paragraphs does not apply] Grid Requirements for Lift and Shift fixing option: Grid is to be SUPATILE GRID with main runners installed at 600mm centres with 600mm cross-tees at 100 or 600mm centres. Grid is to be installed as per Supawood's SUPATILE SLAT Lift & Shift Grid & Panel installation procedure. Grid Requirements for Drop in Tile fixing option: Existing grid may be repainted (enamel paint recommended) and used but it is the contractors responsibility to ensure it is able to support the weight of the tiles as well as the service load factors as prescribed in the AS785. * Refer to Supawood's Technical Services Department for tile weights. *What is required to achieve this will depend on the specific brand, system and configuration currently installed. Typically additional support would be expected to consist of additional hanger supports but the contractor is to take independent advice on this from the original supplier of the existing grid. Panels are to be FSC or PEFC certified. Documentary evidence in the form of an invoice with each line item annotated with the PEFC/FSC content and supplier's chainof-custody number must be provided to the project superintendent for project completion. For complete unabridged Spec Wording in Word format...click here Above: SUPATILE SLAT Lift & Shift in Clear on the ceilings of the walkways on the different levels of an atrium in a university building. For more product information: "Global technology and know-how. Local manufacture and support." SUPAWOOD produce an extensive range of market-leading lining systems and look forward to helping you on your next project. Website: SUPAWOOD Head Office Australasian Support and Manufacturing Aust. Phone: NZ Phone: +64 (9) sales@supawood.com.au SUPAWOOD UK UK & EU Support and Manufacturing Phone: +44 (0) sales@supawood.co.uk