Monkeytoe Aluminium Handrail

Transcription

1 PRODUCT SPECIFICATION SHEET PRODUCT DESCRIPTION Aluminium 3 x rail handrail system that can be mounted to roof, walkway, parapet, walls or stairs for edge protection. TYPICAL USES / APPLICATIONS Anywhere a safe working environment is required with a fall of 1000mm or greater Access routes for Monkeytoe products Edge of roof for fall protection Structural plant platform handrails Walkway handrails Under regulation height parapets CHARACTERISTICS / ADVANTAGES Eliminates the need for the use of cumbersome safety harnesses and certified personnel No static / safety line required Permanent handrail system eliminates the hazard rather than minimising it Prefabricated modular componentry ensures fast onsite assembly No welding required Unique swivelling elbow design for all corners Safe working areas and edge/fall protection for all maintenance personnel System uses the unique Monkeytoe mounting clip when installed on rooftops Allows for non-certified personnel to enter hazardous zones Can be fitted to any roof pitch (1-45 degrees) Lightweight, high strength aluminium components TESTS WARRANTY TECHNICAL DATA / MATERIALS INSTALLATION APPROVALS / STANDARDS C3 loading All handrails are designed and installed in accordance with AS/NZ 1657 Building code B1 Lifetime warranty (10 years) Handrail extrusions: High tensile T6 aluminium (Can be powder coated if required) Elbows & end caps: Diecast aluminium Fixings: Stainless Steel 304 grade Roof connections: - Roofing clip High density Polyethylene, UV-resistant - Galvanised roofing tek screws, - Neoprene sealing washers It is recommended that handrails are included in the standard building warrant of fitness inspections All damaged or loose fixings to be reported immediately to asset manager or building owner for correction MAINTENANCE It is recommended that handrails are included in the standard building warrant of fitness inspections All damaged or loose fixings to be reported immediately to asset manager or building owner for correction 1/7

2 2/7

3 DESIGN LOADS ALUMINIUM SUPPORTS Handrail concentrated action = 600 N Kneerail concentrated action = 300 N Toeboard concentrated action = 100 N 1800 max. 6000mm max. Extrusion Length MULTIPLE EXTRUSIONS MAY BE CONNECTED ALUMINIUM SUPPORT RAILS 430 typ. 430 typ. 900 min typ. TO SUIT PURLINS 3000 max. MKT ROOF CLIPS (REFER TO ROOF CLIP FIXING DETAIL DRAWINGS) ALUMINIUM KNEERAILS 1. DESIGNED IN ACCORDANCE WITH: - STRUCTURAL DESIGN ACTIONS, B1 & B2 DURABILITY, F4 SAFETY FROM FALLING, D1 ACCESS ROUTES CODES Roof Mounted Handrail 2004-HR-ROOF-01 25/07/2018 SCALE: 1:20 REV:01

4 DESIGN LOADS AT 3000mm PURLIN/SUPPORT SPACINGS SYSTEM Uniformly distributed = 1.0 kpa Concentrated action = 1.4 kpa DESIGN LOADS AT 1200mm PURLIN/SUPPORT SPACINGS MKT ROOF CLIPS (REFER TO ROOF CLIP FIXING DETAIL DRAWINGS) Uniformly Distributed = 2.5 kpa Concentrated action = 1.4 kpa POLYESTER RESIN MESH WITH COMPOSITE FIBRE REINFORCEMENT ALUMINIUM SUPPORT RAILS ALUMINIUM BEARER RAILS CONFIG A: 1800 max. CONFIG B: 1200 max Common Module Lengths OTHER LENGTHS AVAILABLE ON REQUEST min. CLEAR 615 typ. CONFIG A: 1200 max. CONFIG B: 3000 max. SKYWALK - NON LEVELLED WITH DOUBLE HANDRAIL 1. MAXIMUM ROOF PITCH WHERE NON LEVELLED WALKWAY IS RUNNING ACROSS THE ROOF = 7 2. MAXIMUM ROOF PITCH WHERE NON LEVELLED WALKWAY IS RUNNING DOWN THE ROOF = SKY-NL DESIGNED IN ACCORDANCE WITH: - STRUCTURAL DESIGN ACTIONS, B1 & B2 DURABILITY CODES DO NOT SCALE 12/06/2018 SCALE: 1:10 REV:01 DIMENSIONS IN MILLIMETERS

5 DESIGN LOADS Handrail concentrated action = 600 N Kneerail concentrated action = 300 N Toeboard concentrated action = 100 N 1800 max. 6000mm max. Extrusion Length MULTIPLE EXTRUSIONS MAY BE CONNECTED 58 ALUMINIUM SUPPORTS 560 max. 430 typ. 900 min typ. 39 FIXINGS Metal - M8 Bolt Timber - M10 Coach Screw Concrete - M10 Through Bolt ALUMINIUM KNEERAIL 1 DETAIL 1 1:5 1. DESIGNED IN ACCORDANCE WITH: - STRUCTURAL DESIGN ACTIONS, B1 & B2 DURABILITY, F4 SAFETY FROM FALLING, D1 ACCESS ROUTES CODES Parapet Mounted Handrail 2004-HR-PAR-01 25/07/2018 SCALE: 1:20 REV:01

6 DESIGN LOADS Handrail concentrated action = 600 N Kneerail concentrated action = 300 N Toeboard concentrated action = 100 N 1800 max mm max. Extrusion Length MULTIPLE EXTRUSIONS MAY BE CONNECTED ALUMINIUM SUPPORTS 150mm ALUMINIUM TOEBOARD OR ALUMINUM KNEERAIL, DEPENDING ON APPLICATION 430 typ typ. 10 max. 900 min typ. 75 FIXINGS Metal - M8 Bolt Timber - M10 Coach Screw Concrete - M10 Through Bolt ALUMINIUM KNEERAIL 1 DETAIL 1 1:5 1. DESIGNED IN ACCORDANCE WITH: - STRUCTURAL DESIGN ACTIONS, B1 & B2 DURABILITY, F4 SAFETY FROM FALLING, D1 ACCESS ROUTES CODES Base Mounted Handrail 2004-HR-BASE-01 25/07/2018 SCALE: 1:20 REV:01

7 1000 TYP EXTRUDED STEP CROSS SECTION MARINE GRADE ALUMINUIM All Fasteners Stainless Steel TO SUIT MAX 4000 BETWEEN LANDINGS SEE NZBC D TYP WIDTH TO SUIT TYPICAL 220 MAX Powder Coated High Visibility Saftey Strip Standard Monkeytoe Handrail Ballustrade Options Availible All Members Marine Grade Aluminuim Optional Support Structures Available By Design High Grip Tread Suitable For Wet Conditions Mounting Plate to Suit Installation Surface 1.DESIGNED IN ACCORDANCE WITH - AS/NZS 1657: AS/NZS 1892: B1 DURABILITY CODE - STATUTORY OHS CODES OF PRACTICE SERVICE STAIR DSS-1 05/07/2018 SCALE: 1:30 REV:01