FLOORING PROFILE GUIDE

Transcription

1 STAIR NOSINGS PVC ACCESSORIES & TRIMS PVC TRANSITION PROFILES FLOORING PROFILE GUIDE FREE APP NOW AVAILABLE ON: MAY 2015

2 CONTENTS PAGE QSMS Measuring Service 2 Building Regulations 3-4 Secret Fixing Stair Nosings 5 Fabrications & Finishing 6 Separate Tread & Adhesive Tape 6 Marketing Support 7 Stair Nosings 8-26 Q Range 9-13 Q Range (Slenderline) Flat Rake 12 Bull Nose & Chevron 12 Q Range (Heavy Duty) Flat 13 Rake 13 Bull Nose & Chevron 13 Flooring accessories specification guidance 14 S Range (Slenderline) Flat 15 Rake 16 Bull Nose 17 H Range (Heavy Duty) Flat 18 Rake 19 Bull Nose 20 Chevron 21 Z Range 22 Ecoglo Photoluminescent Tread Flexible PVC Range 25 Stair Edging Trims & Treadsteps 26 PVC Accessories & Trims - Flexible Sit On Skirtings 28 Flexible Set In Skirtings & Weld Rod Flat Skirtings & Buffer Strips 30 Cove Formers & Capping Strips 31 PVC Floor Mitres 32- PVC Transitions 34 Flexible Bevel Strips & Shower Threshold 35 Flexible Ramp Trims 36 Dual Edge Joint Covers & Cover Joints 37 Topline Floor Trims Quick Reference Guide Format & Packing Specs 41 Stock Lengths & Finishes 42 Colour Charts 43 Order Procedure 44 1 SALES & TECHNICAL SUPPORT

3 Have you heard about Quantum s revolutionary FREE stair nosing measuring service? SAVES TIME SAVES MONEY SAVES WASTE We have been using the QSMS service for years as it is by far the industry s best measurement service Matthew Plunkett, Sales Office Manager - Carpet & Flooring Birmingham The industry s quickest and most accurate measurements To find out more or request a FREE measure, contact your Area Sales Manager, or: Call: +44 (0) info@quantumflooring.co.uk Visit: quantumflooring.co.uk/qsms Powered by: 2

4 BUILDING REGULATIONS There are five documents which give guidance for the design of stairs (and associated Stair Nosings) for use in buildings with public or shared use: i) Building Regulation Document K Protection from falling ii) Building Regulation Document M Access to and use of buildings iii) BS8300:2009+A1:2010 Lighting of stepped access & slip resistance iv) BS 9266:2013 Design of accessible and adaptable general needs housing v) Building Research Information Paper IP15/03: Proprietary nosings for non-domestic stairs Within these regulations and guidance papers there are 5 mandatory topics, which are applicable to Stair Nosings and need to be considered. The following paragraphs explains what these regulations point out in detail and how the products of Quantum Flooring help to achieve the requirements. The suggested solutions will assure that regulatory guidelines for the Stair Nosings are met and thereby assist in the completion of a safe stairway. 1) The recommended dimensions of a Stair Nosing: BRE (K&M), BS8300 and BS9266 The tread should measure between 50-65mm and the riser 30-mm. This ensures there is a large enough band on the nose of the step. Quantum Flooring has a wide selection of Stair Nosings, which have these dimensions. 30- mm 50-65mm 2) The LRV colour requirements of the Stair Nosing tread and riser: BRE (K&M), BS8300 and BS9266 The colour of the Stair Nosing is required to differ from that of the floor covering. Every colour has a Light Reflectance Value (LRV) of between 0 (Black) and 100 (White). There must be at least 30 points difference between the Stair Nosing LRV and the floor covering, e.g. If the floor covering has a LRV of 50, then the Stair Nosing should have a LRV of between 0-20 or This helps to create a ladder effect which helps the partially sighted when ascending or descending a stair way. The Quantum Flooring range of colours all have a LRV value, details of which can be found on Quantum Flooring offers 22 different tread colour options for Stair Nosings and 14 for PVCu channels which can be found on page black 100 white 3

5 RELATING TO STAIR NOSINGS 3) The slip resistance of the tread surface of a Stair Nosing: BRE M and BS8300 The tread material used is important for the safety and performance of a stairway. There are two recommended tests that can be carried out to determine the slip resistance of a flooring material. The pendulum test (PTV) and a surface micro roughness measurement (Rz). Either of these can be used to give an indication of the slip resistance of a material. Quantum Flooring s PVC tread material has been laboratory tested and has a PTV reading greater than 36 and a micro roughness reading, taken off used tread, of >20 Rz. Both these results classify the PVC tread material as being of a low slip potential or risk. 4) Guidance about the coverage of the tread material on the top surface of the Stair Nosing: IP 15/06 The tread is the surface of the Stair Nosing which receives ascending or descending footfall. The Stair Nosing tread material should extend to the front edge to the point at which it meets the vertical face to minimise the risk of a slip in descent. Every profile within the Quantum Flooring Q-Range meets this guidance (see pages 9-13). 5) The assistance provided by a tactile surface at the approaches to a stairway: BRE M and BS8300 A corduroy tactile approach should be installed as a hazard warning surface on the top and bottom approaches of the staircase, which will warn pedestrians that they are approaching a staircase. Quantum offers tactile tiles in 5 different colours to match the LRV requirement (order code TCT400). Other considerations: There are a number of other considerations that should be made, when looking to create best practice staircases, these include looking to avoid:» Bullnosed steps - these can Throughout this guide create a trip hazard to partially sighted users, who use their the products that can foot to find the nose edge of be used to ensure best the step. BR/BS/BRE practice can» Open riser steps - again these be identified by the create a trip hazard. Building Regulations» Shiny metal - as these can best create glare in artificial or practice direct sunlight. stamp.» Double channel Stair Nosings - too wide to meet the 50-65mm requirement. 4

6 SECRET FIXING STAIR NOSINGS All of the S, H and Z ranges are available to be fitted using Secret Fixing. NO MORE PLUGS SECURE CLEAN There is no price difference, simply request secret fixing when placing your order. Secret Fixing Fitting Guidelines 1 When on site, check step measurements with cut Stair Nosing supplied. Trim if required. Prepare step edge surfaces. They must be clean, smooth, and clear of debris. 2 For stone or concrete steps mark screw locations on each tread (3 per step is recommended, or approximately one hole every 300mm.) Drill and plug screw holes. 3 Fit riser floor covering if applicable. Apply adhesive to Stair Nosing and tread as per the manufacturers instructions. 4 Place first Nosing on top step, press down and screw into position. (1 number 6 screws are recommended). 5 Trim tread material lengths to respective Stair Nosing width. Working a step at a time from the top of the stairway downwards, peel off release paper from adhesive in channel(s). 6 Apply tread material into channel position each end first flush with ends and work the excess towards the centre. Press down firmly with hand roller along the full length of the tread material to ensure the bond. Repeat process (1-6) for second step and continue downwards. 5 Turn to page 43 for all our tread colour options

7 FABRICATION & FINISHING Quantum is able to offer a number of factory based fabrication services including Curving, Mitred and Welded returns. Templating is available as part of the QSMS service. All curves are subject to template approval. SPECIALIST STAIR NOSING DRILL BITS Available direct from Quantum, these drill bits are designed so only one drill bit is needed to produce the hole and counter sink as well as producing a minimal burr on the underside. Order code - SLBIT. ALUMINIUM FINISHES We are also able to offer a number of Aluminium finishes including: QUICKSILVER - chrome effect finish Premium finish at an affordable price available on most aluminium sections including curves, mitres and angles. ANODISED - finish also available Look out for these symbols in the Guide: quicksilver gold anodised Call us on or contact your Area Sales Manager for more information on our bespoke fabrication services STAIR NOSING TREAD & TAPE Stair Nosing channels available pre-taped and drilled/undrilled, with tread material separate in 20m coils. (Order channel code with loose tread separate - e.g. SF1 unfilled plus IN50 black tread). PVC Tread for Stair Nosings Adhesive Tape for Tread (2.5mm thick) application to channel Internal use internal use external use 20m coils - all colours 100m rolls 50m rolls Channel Code Width Code Width Code Width Double (x2) IN mm QT100/35 35mm QET50/35 35mm Single (Standard) IN50 50mm QT100/48 48mm QET50/48 48mm GENERAL PURPOSE CONTACT TAPES All 50m rolls Code Width Code Width QT50/15 15mm QT50/ mm QT50/25 25mm QT50/85 85mm 6

8 MARKETING SUPPORT POSTERS POCKET GUIDES HR153 57» FLAT FLEXIBLE PVC Aluminium 3» FLAT PVC ESN5 ZR2» CHEVRON» CHEVRON» BULLNOSE GAUGE: 4-6mm ESN ESN11 ESN13 Colour & LRV Tread Internal PVCu Channel Flexible PVC Light Grey.73 Jade Polar Grey Ivory NEW Sky Colour & LRV Lime Sun Yellow Photo White HEAVY DUTY ZB1 30 ESN8 Also available in gold anodised finish PVCu 8 13R ESN7 Colour & LRV Tread Internal PVCu Channel Flexible PVC Spruce Granite Poppy Flint Royal Blue Fawn Z RANGE 31 32» Strive for Perfection and never to be satisfied. We, all of us at QPSL, will always find better ways of providing value. We are always Learning to be Leaner. Z RANGE SALES & TECHNICAL SUPPORT: +44 (0) fax: +44 (0) info@quantumflooring.co.uk FULL TUBES (p41) Order quantity of tubes of tops by code and colour (p43), plus equivalent number of tubes of required base profile. for stairway approaches TCT400 Each tile 400x400mm BLACK GREY BUFF Quantum Profile Systems Ltd, Salmon Fields, Royton, Oldham, OL2 6JG REGENCY Example: (Nos.) tube(s) of QTR42 Regency & (Nos.) tube(s) of QVB1 Base. quickest and The industry s BOOK A RIBA APPROVED most accurate measurements FACTORY TOUR SPLITSAVES TUBESAVES (SURCHARGEABLE)...today and learn how our To try our FREE SAVES TI M E MONEY WASTE revolutionary lean processes to deliver Order quantity of lengths by code and colourhelp (p43). measuring service QUANTUM SPECIALIST MEASURING SERVICE NEW tel: +44 (0) » Generate Flow to eliminate job queues.» Allow Customer Pull to make and deliver what the customer wants, when they want. S RANGE PVC TRANSITIONS 32 Example: (Nos.) box(es) of QMS1 Black. TACTILES Tread Internal PVCu Channel Flexible PVC NEW fax: +44 (0) PART OF 44 TRADE PRICE LIST * Building regulation best practice solution when specified with polar grey tread material or PVCu. Quantum s revolutionary new Stair Nosing range. Price per metre cut including tread. For stock lengths add 5% for drilling. Q Straight (F) QR-SF1 QR-SF125R QR-SF153 QRu-SR1 (PVCu) QRu-SR125R (PVCu) Rake (R) QR-HR1 QRu-SF125R (PVCu) HEAVY DUTY Gauge 5mm Rake (R) Straight (F) QR-HF1 QR-HF153 QRu-HF1 (PVCu) SLENDERLINE QR-SF153R Gauge 2.5-3mm QRu-SF1 (PVCu) QR-SR1 QR-SR125R QRu-HR1 (PVCu) Bull Nose (B) QR-SB136 QR-SB136R QR-SC140 NEW QR-SC140R Bull Nose (B) QR-HB Straight (F) HF1 Gauge 5mm HF153 Price per metre HF2 cut including tread. Rake (R) Add 5% for HR1 drilling on stock HR153 lengths only. HR2 Chevron (C) Chevron (C) NEW QR-HC1 NEW Durable aluminium Stair Nosings designed for use in a wide range of commercial and industrial applications where slim gauge floorcoverings such as vinyl or lino are specified. Options of lipped and ramped back edge profiles are safety features which reduce the risk of tripping - useful in educational and healthcare locations RANGE Straight (F) SF1 SF125R SF160R 3 Rake (R) SR1 SR125R SR225R SR126L SR226L SR153 SR160R Bull Nose (B) SB1 SB136 SB2 Most Quantum Stair Nosings available with tread separate. PENCILS Straight (F) Z RANGE ZF1 SLENDERLINE Gauge 2-3mm ZF2 HEAVY DUTY Gauge 5mm HB1 HB157 HB2 HPB (PVCu) Chevron (C) HC2 CLEAN» No dirt traps either above or below the Stair Nosing» Satin etched, scratch resistant riser» Easy to clean, low maintenance solution colour RANGE / PVcu carrier inc. Light Reflectance Value Rustic Peat Regency Dark Blue Spruce Granite Claret Black Rustic Peat Regency Jade Polar Grey Ivory Flint Light Grey Polar Grey Ivory Yellow White Flint Royal Blue Sky Lime Sun Yellow Photo White NEW NEW Fawn Poppy Light Grey Dark Blue Spruce Granite PLEASE NOTE:» There is not an option for Q Range Stair Nosings to be curved.» Not available in Quicksilver. Dimensions in mm. Drawings not to scale. The Quantum Floormitre Cap & Cove System is designed to make the fitting of vinyl in corners easier, quicker and smoother. ZHF1 Saves money Gripper Trim HG1 (Punched) HG1 (Unpunched) H» Eliminate creases and kinks» Promote uniformity» Minimise bacteria build up CCFM1 Internal Floormitre Saves waste 2 Install Quantum Floorings Cove Former to meet the Floormitres. CCFM2 External Floormitre Prepared Floormitres are ready for 3 Install Quantum Floorings the installation of vinyl. Capping StripECF4 or Diminishing Strip UCS1 Cove Capping Strip overlapping theformer Floormitres at the external and internal points. RANGE Rake (R) ZR1 ZR2 Rake (R) CODE ESN1 ESN3 ESN ZHR1 Packing Spec CODE 14 x 2m 10 x 2m 14 x 2m Call: Fax: Visit: Note: The preformed seamless tel: +44 (0) Bull Nose (B) ESN7 ESN8 ESN ZB1 Bull Nose (B) ZHB1 Packing Spec CODE 10 x 2m 10 x 2m 10 x 2m ESN11 ESN Most Quantum Stair Nosings available with tread separate e. info@quantumflooring.co.uk or installed by the conventional method. Technical Data The product is hazard free, contains no water or solvents. For the full Technical Datasheet go to the Cutting Corners website Z Packing Spec 10 x 2m 10 x 2m 5 Complete vinyl with smooth radius and support for the external and internal corners. P V C QUANTUM SPECIALIST MEASURING SERVICE Free on-site Stair Nosing measuring service The industry s quickest and most accurate measurements Floormitres can be Quantum used with capping or Profile Systems Ltd. diminishing strip at either 1OO Royton, or 150mm Salmon Fields, Oldham OL2 6JG construction industry standard heights. t f Vinyl can be wrapped as shown in Step 5 info@quantumflooring.co.uk Cleaning Wipe with damp cloth and mild detergent solution. Do not use solvents. tel: +44 (0) info@quantumflooring.co.uk 4 MEASURE REQUEST PADS Stair Nosing Site Survey Measure and Report Form Essential Information DISTRIBUTOR CONTACT DETAILS sales@quantumfloorning.co.uk STAIR NOSING DETAILS How many flights? Contact Person How many steps? Tel: Curves to be templated? Fax: Type of Floor Covering to be fitted? Profile Reference? CONTRACTOR Tread/Infill Colour Contact Person UPVC Carrier Colour? Tel no. and/or Fax no. Separate Tread/Infill? (State Ecoglo if appropriate) Yes/No? Yes/No? Drilled and Plugged? Yes/No? SITE NAME Measure Oversize? Yes/No? SITE ADDRESS Angles 90 deg. and quantity if applicable? Yes/No? Angles 83 deg. and quantity if applicable? Yes/No? Trims or Accessories (please specify)? Yes/No? Angle/Trim colour? Comments (e.g any special site requirements) POST CODE SITE CONTACT (name) TEL: FITTING DATE DATE REQUEST RECEIVED SAMPLE BOXES ASM/SS and Date Form Completed INDIVIDUAL SAMPLES For any of these items please your request to: info@quantumflooring.co.uk info@quantumflooring.co.uk The flexible internal and external coves are unique allowing the perfect uniform finish every time with a patent pending design Price per metre for full boxes. Split boxes add 25%. FLEXIBLE PVC RANGE» Offers a Building Regulations best practice solution* Black NEW 1 Install the preformed seamless Internal and External Floormitres. Bull Nose (B) Price per metre cut including tread. Add 5% for drilling. Straight (F) Gauge 2-3mm Price per metre cut including SF225R tread. SF126L Add 5% for SF226L drilling on stock SF153 lengths only.» All over tread increasing safety for end user (patent pending) 6.16» Reduce fitting times HEAVY DUTY RANGE This special range of aluminium Stair Nosings comprises a selection of popular cost effective profiles for a wide range of commercial applications including offices, retail, leisure, education and healthcare. This range has been developed to respond to the demand for a best value solution for a competitive market place. Available with the full choice of tread colours. Z RANGE SLENDERLINE S» Slip resistant tread material» minimal packaging» manufactured using LEAN principles Claret 9 FEBRUARY FREE APP NOW AVAILABLE ON: SLENDERLINE SAFE» Designed with recycling in mind CONTACT US QUANTUM time FLOORMITRE CAP & COVE SYSTEM STAIR NOSINGS Offering a thicker gauge than the S-Range, the H-Range of Stair Nosings are available with a durable aluminium carrier channel. They can be used in most commercial applications including offices, retail, leisure, education and healthcare. Their thicker gauge enables them to be fitted with a wide variety of textured floor coverings, such as carpet and carpet tiles from most leading manufacturers. HEAVY DUTY GREEN FLYERS Save time, money & waste Call to book: The new Q-Range is available in 21 special profiles. The unique Stair Nosing design is suitable for installation in all categories of public and commercial buildings. The new Quantum all over tread design**, which provides a slip resistant surface from the nose to the back edge, gives the benefit of extra safety when ascending or descending stairs. Also, the satin etched aluminium riser surface provides the double benefit of being scratch resistant and it inhibits the potential for glare, which is one of the requirements of the latest BS8300:2008 and Building Regulation* guidelines applicable to stairways in areas of Public Access. ** Patent pending M AY 2015 FREE APP NOW AVAILABLE ON: Saves FREE on-site Stair Nosing measuring service STAIR NOSINGS PVC TRANSITION PROFILES Building regulation best practice solution when specified with polar grey tread material or PVCu. colour RANGE / TREAD inc. Light Reflectance Value Details correct at time of publication but please visit the website for the latest product information. PRICE LISTS STAIR NOSINGS * LEAN, GREEN, SAFE & CLEAN QPSL Group strives for continuous improvement in our environmental, health and safety management systems and in the environmental quality of our products, processes and services. info@quantumflooring.co.uk info@quantumflooring.co.uk PVC ACCESSORIES & TRIMS ** Patent pending Visit the website or call Example: (Nos.) lengths of QTL36 Black & (Nos.) lengths of QAB1 Base. Dimensions in mm. Drawings not to scale. Colours shown here are for guide purposes only and are only as accurate as the printing process allows. For an exact match to your requirements, always request a sample. Offers a Building Regulations best practice solution 60 FULL BOXES (p41) Order quantityzhr1 of boxes by code andzhb1 colour (p43). ZHF1 call Also available in quicksilver finish Quantum Flooring Solutions, Salmon Fields, Royton, Oldham, OL2 6JG GAUGE: 4-7mm Example: (Nos.) lengths of Q100 SO Black. SB ESN3 Colour & LRV Tread Internal PVCu Channel Flexible PVC 6.16 Claret 6.34 Black Rustic Peat Dark Blue Regency ZR ESN1 STAIR NOSINGS TREAD & CHANNEL PVCu COLOURS ZF PVC ACCESSORIES & TRIMS 88 SLENDERLINE 30 SPLIT BOX (SURCHARGEABLE) Order quantity of lengths by code and colour (p43). GAUGE: 2-3.5mm SR226L 60» Improve Value Stream to do things that create Value for our customers. HG Example: (Nos.) box(es) of UCS1 Cloud Grey. 94 SR225R ZF RANGE KEY 31 HC2 HEAVY DUTY 36 FULL BOXES (p41) Order quantity of boxes by code andsb136 colour (p43). SB SR160R 82» BULLNOSE Z RANGE SLENDERLINE GAUGE: 2-3.5mm» RAKE» RAKE Z HPB SF226L SR At QPSL we embrace the five Lean principles:» Create Value as our customers see it. 17 Example: (Nos.) ZR1 Pack(s) HB SF225R SR126L 82 QR-HC1 Z RANGE PACKS (Z-Range only p22) 5 60 Order by code and state Pack HB2 SF160R 56 RANGE SF SR125R HB SF126L Example: (Nos.) lengths94of HF2 Regency at 3.2m - drilled Q RANGE STOCK LENGTHS HEAVY DUTY Order quantity, code, colour (p43) and length (p42). 40 GAUGE: 5mm Also state if StairNEW Nosings are to be drilled SF125R 57 SR1 36 PVC TRANSITION PROFILES Ask Argue Agree Act The new Q Range is available in 21 special profiles. The unique Stair Nosing design is suitable for installation in all categories of public and commercial buildings. The new Quantum Flooring all over tread design**, which provides a slip resistant surface from the nose to the back edge, gives the benefit of extra safety when ascending or descending stairs. Also, the satin etched aluminium riser surface provides the double benefit of being scratch resistant and it inhibits the potential for glare, which is one of the requirements of the latest BS8300:2008 and Building Regulation* guidelines applicable to stairways in areas of Public Access (see pages 3-4 for further details). QUANTUM FLOORMITRE CAP & COVE SYSTEM - FITTING GUIDE 53 HR SF1 42 QR-HB r NEW FLOORING PROFILE GUIDE HR NEW» BULLNOSE 53 HF ThE complete STAIR NOSING SOLUTION ; STAIR NOSINGS PVC ACCESSORIES & TRIMS QR-SC140 QR-SC140R Example: (Nos.) pieces HR1 Black as per cutting list - tread loose, channel drilled.» CHEVRON GAUGE: 2.5-3mm» BULLNOSE HF2 57 S RANGE SLENDERLINE GAUGE: 2-3.5mm QRu-HR1 [formerly DDA-HR1 ask argue agree act SLENDERLINE 60 TREAD 45 Unless otherwise specified, all Stair Nosings will be supplied with standard internal grade tread. 45» RAKE» FLAT HF1 39 QR-HR QR-SB136R» FLAT» FLAT 59 58» RAKE H RANGE QRu-HF1 [formerly DDA-HF QR-SB QR-HF QR-HF QRu-SR125R 39 GAUGE: 5mm QRu-SR1 [formerly DDA-SR1]» RAKE» RAKE Q RANGE HEAVY DUTY QR-SR125R Example: (Nos.) pieces SF1 Black as per cutting list - drilled Q RANGE with plugs. QRu-SF125R 41 * Building Regulations best practice solution when specified state if Stair Nosings are to with polaralso grey tread material. QRu-SF1 [formerly DDA-SF1] 60 &, 6I% CUT, DRILLED OR UNDRILLED Order quantity, code and colour (p43) with cutting schedule. (Call Quantum Flooring, local ASM, or Distributor for site measures). be drilled QR-SF153R QR-SF QR-SR1 8QLFODVV / / STAIR NOSINGS QR-SF125R» BULLNOSE» FLAT STAIR NOSINGS 60 QR-SF1» BULLNOSE Q RANGE SLENDERLINE GAUGE: 2.5-3mm Scan here or visit our website to find your local Area Sales Manager ORDER PROCEDURE STAIR NOSINGS

9 8

10 The complete Stair Nosing solution ** Patent pending * Building regulation best practice solution when specified with polar grey tread material or PVCu. The new Q Range is available in 21 special profiles. The unique Stair Nosing design is suitable for installation in all categories of public and commercial buildings. The new Quantum Flooring all over tread design**, which provides a slip resistant surface from the nose to the back edge, gives the benefit of extra safety when ascending or descending stairs. Also, the satin etched aluminium riser surface provides the double benefit of being scratch resistant and it inhibits the potential for glare, which is one of the requirements of the latest BS8300:2008 and Building Regulation* guidelines applicable to stairways in areas of Public Access (see pages 3-4 for further details). COLOUR RANGE / TREAD inc. Light Reflectance Value Claret Black Rustic Peat Regency Dark Blue Spruce Granite Poppy Flint Royal Blue Fawn Light Grey Jade Polar Grey Ivory Sky Lime Sun NEW NEW NEW Yellow Photo White 9

11 GREEN» Designed with recycling in mind» Minimal packaging» Manufactured using LEAN principles SAFE» Slip resistant tread material» All over tread increasing safety for end user (patent pending)» Offers a Building Regulations best practice solution* CLEAN» No dirt traps either above or below the Stair Nosing» Satin etched, scratch resistant riser» Easy to clean, low maintenance solution COLOUR RANGE / PVCu CARRIER inc. Light Reflectance Value Claret Black Rustic Peat Regency Dark Blue Spruce Granite Flint Light Grey Polar Grey Ivory Yellow White PLEASE NOTE:» There is not an option for Q Range Stair Nosings to be curved.» Not available in Quicksilver. Dimensions in mm. Drawings not to scale. 10

12 The new Q Range is available in 21 special profiles. The unique Stair Nosing design is suitable for installation in all categories of public and commercial buildings. SLENDERLINE GAUGE: 0-3mm SLENDERLINE FLAT (STRAIGHT) 60 QR-SF1 QR-SF125R QR-SF153 QR-SF153R 60 QRu-SF1 [formerly DDA-SF1] 11 Dimensions in mm. Drawings not to scale. QRu-SF125R

13 ALUMINIUM PVCu GAUGE: 0-3mm SLENDERLINE 60 RAKE QR-SR1 QR-SR125R 60 QRu-SR1 [formerly DDA-SR1] QRu-SR125R 60 BULL NOSE QR-SB136 QR-SB136R 60 CHEVRON QR-SC140 NEW QR-SC140R NEW Dimensions in mm. Drawings not to scale. 12

14 ALUMINIUM PVCu HEAVY DUTY GAUGE: 4-7mm HEAVY DUTY FLAT (STRAIGHT) The Q Range helps to meet all current BRE, DDA, Equality Act & Building Regulation requirements 39 QR-HF QR-HF153 QRu-HF1 [formerly DDA-HF1] RAKE QR-HR1 QRu-HR1 [formerly DDA-HR1 BULL NOSE CHEVRON QR-HB QR-HC1 NEW 13 Dimensions in mm. Drawings not to scale.

15 Quantum Flooring are on your side For help with selecting the right flooring accessories for a specification, please visit: or call today 14

16 RANGE FLAT 57 S Range Stair Nosings are a premium range of Stair Nosings for use with slim gauge floor coverings such as vinyls and lino from all major manufacturers. Suitable for a wide range of commercial and industrial applications. SLENDERLINE GAUGE: 0-3.5mm Also available in quicksilver finish Also available in gold anodised finish 68 SF1 Gold Anodised stock item 28 SF125R Gold Anodised stock item SF126L 26 SF225R 32 Ramp iback Nosings (R) are ideal for applications where there is no floor covering and can be installed directly to the step SF226L ZF SF153 SF160R 15 Dimensions in mm. Drawings not to scale.

17 Also available in quicksilver finish Also available in gold anodised finish ALUMINIUM GAUGE: 2-3.5mm SLENDERLINE 57 RANGE RAKE SR i Lip Nosings (L) cover the residual floor covering to prevent lifting at the back of the Nosing SR125R SR126L 94 SR225R SR226L ZR SR SR160R Dimensions in mm. Drawings not to scale. 16

18 Also available in quicksilver finish Also available in gold anodised finish RANGE ALUMINIUM SLENDERLINE GAUGE: 2-3.5mm BULL NOSE SB1 30 SB SB136 CHEVRON Our Chevron profiles are now in the Q Range. Please see page Dimensions in mm. Drawings not to scale.

19 Suited to textured floor coverings such as carpet and carpet tile, the H Range offers a number of premium heavy duty aluminium and PVCu Stair Nosings. Also available in quicksilver finish Also available in gold anodised finish GAUGE: 4-7mm HEAVY DUTY 59 RANGE FLAT 34 HF1 90 Gold Anodised stock item HF2 Double ichannel Nosings are often used in high traffic areas as there are two channels of slip resistant tread material HF153 HG1 iis used alongside all Nosings in the H Range when installing with thick pile carpets and is available punched or unpunched 5 17 HG1 Gold Anodised stock item Dimensions in mm. Drawings not to scale. 18

20 Also available in quicksilver finish Also available in gold anodised finish RANGE ALUMINIUM PVCu HEAVY DUTY GAUGE: 4-7mm RAKE HR HR HR153 HG1 iis used alongside all Nosings in the H Range when installing with thick pile carpets and is available punched or unpunched 5 17 HG1 Gold Anodised stock item 19 Dimensions in mm. Drawings not to scale.

21 Also available in quicksilver finish Also available in gold anodised finish ALUMINIUM PVCu GAUGE: 4-7mm HEAVY DUTY RANGE 67 BULL NOSE HB1 Gold Anodised stock item HB HPB HB157 HG1 iis used alongside all Nosings in the H Range when installing with thick pile carpets and is available punched or unpunched 5 17 HG1 Gold Anodised stock item Dimensions in mm. Drawings not to scale. 20

22 Also available in quicksilver finish Also available in gold anodised finish RANGE CHEVRON ALUMINIUM HEAVY DUTY GAUGE: 4-7mm HC2 i The entire H Range is available in secret fixing, see page 5 for more details More of our Chevron profiles are now in the Q Range. Please see page 13. HG1 iis used alongside all Nosings in the H Range when installing with thick pile carpets and is available punched or unpunched 5 17 HG1 Gold Anodised stock item 21

23 Developed to respond to the demand for a cost effective solution, the Z Range offers a complete range of aluminium Stair Nosings suitable for a wide range of commercial applications. GAUGE: 2-3.5mm 4-6mm RANGE GAUGE: 2-3.5mm SLENDERLINE ZF1 ZF2 FLAT ZR1 62 ZR2 RAKE 31 BULL NOSE ZB GAUGE: 4-7mm HEAVY DUTY FLAT ZHF RAKE i Z Range is available in pre packed boxes and in all tread colours (see page 43) ZHR1 32 ZHB1 BULL NOSE Dimensions in mm. Drawings not to scale. 22

24 The Ecoglo tread material option offers an innovative solution to stair case edge safety. In areas of reduced light, Ecoglo tread will illuminate the step edge using a unique photoluminescent material. The strip is combined with a silicon carbide band to increase slip resistance. The strip will charge with both natural and artificial light so is popular for both internal and external installations. KEY FEATURES» Reduces slips and falls by improving step edge contrast in all light conditions» Internal and external applications» Highly durable» Improved accessibility» UV resistant» Provides 24 hour visibility» Cost effective, low maintenance solution» Fail safe solution for building regulations and health and safety requirements» Recharged through exposure to light» Highly sustainable» Available on most Quantum Stair Nosings» Already specified worldwide» Ecoglo is only available as a secret fixing (see page 5). Slip resistant carbide available in 2 colours Revolutionary patent protected photoluminescent strip Most Quantum Aluminium & upvc Nosings can be installed with Ecoglo* * not available in the Q Range or in single channel profiles of the Z Range. 23

25 A highly durable, photoluminescent and slip resistant tread option available across most of the Quantum range. PRODUCT SLIP RESISTANT PHOTOLUMINESCENT & BLACK SLIP RESISTANT PHOTOLUMINESCENT & YELLOW 37mm (for double channel) EGLO-31 EGLO-32 50mm EGLO-51 EGLO-52 SLIP RESISTANT BLACK EGLO- EGLO-53 SLIP RESISTANT YELLOW EGLO-34 EGLO-54 SLIP RESISTANT PHOTOLUMINESCENT EGLO-35 EGLO- Ecoglo is only available in cuts, as a secret fixing. When ordering please state the Stair Nosing profile that you require along with the Ecoglo tread code. 50mm (EGLO-5x) tread is for use with single channel Stair Nosing in the H & S range e.g. SF1 EGLO-51. Double channel Stair Nosings in the S, H and Z range require a 37mm tread, please state which tread is required for each channel (F) for front (B) for back e.g. HF2 EGLO-31 (F) EGLO- (B). Extra EcoGlo colours now available. Call for details Visit for more information 24

26 FLEXIBLE RANGE Flexible PVC Stair Nosings offer a quick and easy solution as they can be cut and trimmed on site and can also be curved around gentle radii without the need for templating. PVC GAUGE: 3-9mm ESN ESN ESN ESN7 13R ESN ESN ESN11 49 i Flexible PVC Nosings can be curved on site ESN Dimensions in mm. Drawings not to scale.

27 STAIR NOSING ACCESSORIES STAIR EDGING TRIMS Pre formed universal angles for finishing step sides on open string staircases. Select and position TAB1 or 2 for four different floorcovering depths (3.5, 5.0, 8.0 and 9.5mm). TABs included in boxes. 4 BT BT / UTA UTA UTP UTP BT 20 TAB1 for 3.5mm TAB1 for 3.5mm TAB1 reverse for 9.5mm TAB1 reverse for 9.5mm TAB2 for 5mm TAB2 TAB2 for reverse 5mm for 8mm TAB2 reverse for 8mm 3.5 UTA UTP 20 TAB1 for 3.5mm TAB1 reverse for 9 TAB2 for 5mm TAB2 reverse for 8 UT TRIMS Alum-UTA PVCu-UTP Boxes 20 x 90º angles Boxes 20 x 83º angles Single angles Stock lengths 2.75m TREADSTEPS Hard wearing anti-slip rubber composite strips 8mm thick for setting into treads of steps and floors. Typically used with concrete, terrazzo, wood, stone and marble. Available in Black or Light Grey. Profile Shape Width in mm LL13 LL25 LL LL50 LL63 LL75 - SS25 SS SS50 SS63 SS75 - BB25 BB BB50 BB63 BB75 - DC25 DC DC Dimensions in mm. Drawings not to scale. 26

28

29 Installed on top of the floor covering, this range of skirtings offers an option when addressing the join between the wall and the floor. Available in a number of different sizes and colours, the range offers a solution to most flooring applications. PVC FLEXIBLE SKIRTING 50 i Q100 SO [EC5] also available as QZ100 SO [ZEC5] in pre packed boxes (black only) Q50 SO [formerly EC1] Q75 SO [formerly EC3] Q100 SO [formerly EC5] Q100 SOC [formerly EC Coiled] Q60 SOC [formerly EC6 Coiled] 150 i Q60 SO [EC6] is available in 32m coils ideal for trimming and fitting on site 10R 23 Q150 SO [formerly EC9] 19 EC15 23 Dimensions in mm. Drawings not to scale. 28

30 FLEXIBLE SKIRTING Set-in skirting is used to produce a seal between the floor covering and skirting which is ideal for use in areas where regular wet cleaning is carried out. Quantum also produces a range of complimentary coloured weld rods for use when welding the adjacent floor covering. PVC Q SI [formerly EC4] Q SI [formerly EC14 (2mm)] Q100 i50 SI [EC14] is available in 2mm (Q SI), 2.5mm (Q SI) or 3.2mm (Q SI) foot ialso available as QZ SI [ZEC14] in pre packed boxes (black only) Q SIC [formerly EC14 Coiled (2mm)] 2 50 Q SI [formerly EC8 (2mm)] i Q SI [EC8] is available in 2mm (Q SI) or 2.5mm (Q SI) foot Weldrod Colour Chart 4mm PVC Weld Rod is available for use with set-in skirtings. Details on request. BLACK CHARCOAL CLOUD GREY REGENCY ARCTIC BLUE JADE WHITE PLATINUM GREY LIGHT BUFF Colours shown here are for guide purposes only and are only as accurate as the printing process allows. For an exact match to your requirements, always request a sample.

31 A durable range of PVC products that protect the bases of walls and doors in most internal applications. The range is simple to install and is easily secured to the base of the wall using contact adhesive. PVC SKIRTING BUFFER 50 EB1 100 EB3 150 EB EFA75 A corner ibuffer strip to protect the corners of walls or a stair nose protector for waterfall carpets, where the carpet would run over the It is important to note, we do not recommend its use as a stair edging top! EB12 Dimensions in mm. Drawings not to scale. 30

32 FORMERS CAPPING These products are used in conjunction with each other to allow the floor covering to be continued up the wall. The cove former is installed at the join between the wall and the floor to create a constant curve to run the floor covering up as well as a hidden support for the floor covering at a weak point. A capping strip is then installed where the floor covering ends to create a neat finish. PVC PVCu ECF i ECF4 also available as ZECF4 in pre packed boxes (black only) ECF QCF35 NEW 35 CCF QCC1 4 i QCC1 also available as ZQCC1 in pre packed boxes (black only) QCC QCC ECS4 i QCT1 is available Rigid (R) or Flexible (F) QCT ECCS 6 40 UCS1 4 UCS1 also available as ZUCS1 in pre packed boxes (black only) UCS2 4 i UCS2 is also available in 25m coils 31 Dimensions in mm. Drawings not to scale.

33 EXTERNAL FLOOR MITRE The External Floormitre from Quantum Flooring is designed to make the fitting of vinyl in external corners easier, quicker and smoother. This flexible external cove is unique allowing the perfect uniform finish every time with a patent pending design. CCFM2» Eliminate creases & kinks» Promote uniformity» Reduce fitting times 1 Install the preformed seamless External Floormitre. 2 Install Quantum Flooring s cove former to meet the External Floormitre. 3 Install Quantum Flooring s capping strip or diminishing strip overlapping the External Floormitre at the external point. The preformed seamless External Floormitre can be used with capping or diminishing strip at 100mm or 150mm construction industry standard heights. 4 Above shows the prepared external ready for installation of vinyl. 5 Complete vinyl external mitre with a smooth radius and supported external corner. Vinyl can be wrapped as above or installed using the conventional method. Remember to order with ECF4 and UCS1/UCS2: UCS1 UCS ECF

34 INTERNAL FLOOR MITRE The Internal Floormitre from Quantum Flooring is designed to make the fitting of vinyl in internal corners easier, quicker and smoother. This flexible internal cove is unique allowing the perfect uniform finish every time with a patent pending design. CCFM1» Eliminate creases & kinks» Promote uniformity» Reduce fitting times 1 Install the preformed seamless internal Floormitre. 2 Install Quantums cove former to meet Floormitre. 3 Install Quantums Capping Strip or Diminishing Strip overlapping the Floormitre at the internal point. 4 Prepared internal ready for the installation of vinyl. 5 Completed vinyl internal mitre with a smooth radius and supported internal corner. TESTIMONIALS The two concepts provide you with a perfect floor finish and saves you time which equals money. My company will be using these new concepts - an amazing invention that solves an historical problem that many have sought to solve. - Specialist Clean Room Vinyl Installer I have been in the vinyl flooring trade for around 10 years now and I can t believe these two concepts, they really do eliminate all my problems. It makes my job so much easier and I would highly recommend them both. - Experienced Flooring Contractor

35 34

36 FLEXIBLE STRIPS Creates a protective edge trim for a floor covering and helps to manage the transition between two floor coverings. They can also be used underneath a floor covering to raise it to another level of adjoining covering. PVC 2 CURVABLE ON SITE QT200 [formerly EBS1] QT250 [formerly EBS2] 25 QT320 [formerly EBS3] QT450/25 [formerly EBS5] 25 QT200/50 [formerly EBS4] THRESHOLD The perfect solution for shower wet rooms laid to create a barrier to water QTR10 35 Dimensions in mm. Drawings not to scale.

37 These profiles take the installed floor covering down to the residual floor types eliminating a trip hazard as well as protecting the edge of the floor covering. FLEXIBLE TRIMS CURVABLE ON SITE QT450 [formerly QR/4.5] QFT450 [formerly FR/4.5] 6 QT600 [formerly QR/6] 6 3 QFT600 NEW QMS QMS QMS3 40 Dimensions in mm. Drawings not to scale. 36

38 EDGE COVERS Provides a method of joining two different floor types as well as protecting the edges of the floor covering from being scuffed and being a trip hazard. PVC PVCu ALUMINIUM CURVABLE ON SITE QD35/ QD35/ QR40/ QR46/7.5 JOINTS Offers a solution to join two vinyl floors. Cover joints are welded to the adjoining floor covering using Weldrod, see page for details. 2.5 QCJ Dimensions in mm. Drawings not to scale. QCJ75 75

39 KEY FEATURES» All tops fit all bases» Low Maintenance» Choice of 7 colours*» Easily Installed» QAB2 available with optional carpet gripper TOPLINE FLOOR PVC PVCu ALUMINIUM PVCu BASES CURVABLE ON SITE SIDE 1 SIDE 2 ALL TOPS FIT ALL BASES *See page 43 for colour options QTL36 36 TOPS SIDE 1 SIDE 2 i QTR42 All profiles can be easily curved on site using QVB1, QVB2 or QVB3 bases. SIDE 1 Min. radius - 500mm (except QTR45 - min. 800mm) EXAMPLES PVCu EXAMPLES Side 1 6-8mm QTR42 with QAB1 Side mm QTR42 with QVB1 QTR45 Side 2 0mm Side 2 0-2mm 42 SIDE 2 EXAMPLES Side 1 6-8mm QTR42 with QAB1 (Pre-drilled) 45 Side mm Side 2 QTR42 with QVB1 Side 2 0mm 0-2mm BASES QVB1 Aluminium QVB2 QVB3 6 9 QAB1 QAB2 (Punched or Unpunched) PRODUCT COMBINATIONS QTL36 QTR42 QTR45 SIDE 1 SIDE 2 SIDE 1 SIDE 2 SIDE 1 SIDE 2 QVB1 8-10mm 8-10mm 8-10mm 2mm 8-10mm 0mm QVB mm 16-18mm 14-16mm 10-12mm 16-18mm 6-8mm QVB3 7-9mm 7-9mm 6-8mm 0mm 6-8mm 0mm QAB1 7-9mm 7-9mm 6-8mm 0mm 6-8mm 0mm QAB mm 8-10mm 7-9mm 3-5mm 7-9mm 0mm Dimensions in mm. Drawings not to scale.

40 QUICK REFERENCE GUIDE STAIR NOSINGS CODE PAGE CODE PAGE BB25//50/63/75 26 QR-SC DC25//50 26 QR-SC140R 12 Ecoglo 24 QR-SF1 11 ESN1 25 QR-SF125R 11 ESN3 25 QR-SF ESN5 25 QR-SF153R 11 ESN7 25 QR-SR1 12 ESN8 25 QR-SR125R 12 ESN9 25 QRu-HF1 13 ESN11 25 QRu-HR1 13 ESN13 25 QRu-SF1 11 HB1 20 QRu-SF125R 11 HB QRu-SR1 12 HB2 20 QRu-SR125R 11 HC2 21 SB1 17 HF1 18 SB HF SB2 17 HF2 18 SF1 15 HG SF125R 15 HPB 20 SF126L 15 HR1 19 SF HR SF160R 15 HR2 19 SF225R 15 IN/50 6 SF226L 15 LL13/25/50/63/75 26 SR1 16 QET50/35 6 SR125R 16 QET50/48 6 SR126L 16 QT50/15 6 SR QT50/25 6 SR160R 16 QT50/ 6 SR225R 16 QT50/85 6 SR226L 16 QT100/35 6 SS25//50/63/75 26 QT100/48 6 UTA & UTP 26 QR-HB ZB1 22 QR-HC1 13 ZF1 22 QR-HF1 13 ZF2 22 QR-HF ZHB1 22 QR-HR1 13 ZHF1 22 QR-SB ZHR1 22 QR-SB136R 12 ZR1 22 ZR GUIDE TO PROFILE CODES Range Shape Channels Tread Detail H= Heavy Duty F= Flat Front 1 L= Lipped QR= Q-Range R= Rake Back 2 R= Ramp Back S= Slenderline B= Bull Nose Z= Z-Range C= Chevron

41 PVC ACCESSORIES & TRIMS CODE PAGE CODE PAGE CCF1 31 Q SIC (as above Coiled) EB1 30 Q SI [EC14 (3.2mm)] EB3 30 Q SI [EC8 (2mm)] EB4 30 Q SI [EC8 (2.5mm)] EB12 30 QCC1 31 EC15 28 QCC2 31 ECCS 31 QCC3 31 ECF2 31 QCF35 31 ECF4 31 QCT1 (Rigid or Flexible) 31 ECS4 31 QZ100 SO [ZEC5] 28 EFA75 30 QZ SI [ZEC14 (2mm)] Q50 SO [EC1] 28 QZ SIC (as above Coiled) Q60 SO [EC6 (Coiled)] 28 QZ SI [ZEC14 (2.5mm)] Q75 SO [EC3] 28 QZ SIC (as above Coiled) Q100 SO [EC5] 28 QZ SI [ZEC14 (3.2mm)] Q100 SOC (as above Coiled) 28 TCT400 4 Q150 SO [EC9] 28 UCS1 & ZUCS1 31 Q SI [EC4] UCS2 (also Coiled) 31 Q SI [EC14 (2mm)] Weldrod (Coiled) Q SIC (as above Coiled) ZECF4 31 Q SI [EC14 (2.5mm)] ZQCC1 31 PVC FLOOR MITRES CODE PAGE CODE PAGE CCFM2 32 CCFM1 TRANSITIONS CODE PAGE CODE PAGE QAB1 QT200 [EBS1] 35 QAB2 (Punched/Unpunched) QT250 [EBS2] 35 QCJ50 37 QT320 [EBS3] 35 QCJ75 37 QT200/50 [EBS4] 35 QD35/5 37 QT450/25 [EBS5] 35 QD35/ QT450 [QR/4.5] 36 QFT450 [FR/4.5] 36 QT600 [QR/6] 36 QFT QTL36 QMS1 36 QTR10 35 QMS2 36 QTR42 QMS3 36 QTR45 QR40/5 37 QVB1 QR46/ QVB2 QVB3 40

42 FORMAT & PACKING SPECS STAIR NOSINGS Format Stair Nosing Range Stair Nosing Material Q S H Z Alum PVCu Cut to size Stock lengths Drilled & plugs Undrilled Packs (12x1.22) n/a n/a n/a n/a PVC ACCESSORIES & TRIMS * FULL BOX PACKING SPECIFICATIONS CODE Packing Spec CODE Packing Spec CCFM1 & CCFM2 50 Q(Z) SI [(Z)EC14 (3.2mm)] 14 x 2m CCF1 20 x 2m Q SI [EC8 (2mm)] 14 x 2m EB1 2 x 32m coils Q SI [EC8 (2.5mm)] 14 x 2m EB3 32m coil QCC1 & ZQCC1 40 x 2m EB4 32m coil QCC2 30 x 2m EB12 16m coil QCC3 50 x 2m EC15 40 x 2m QCF35 40 x 2m ECCS 20 x 2m QCT1 (Rigid/ Flexible) 50 x 2m ECF2 50 x 2m QET50/35 4 x 50m ECF4 & ZECF4 40 x 2m QET50/40 3 x 50m ECS4 4 x 25m coils QET50/48 3 x 50m EFA75 10 x 2m QT50/15 16 x 50m Q50 SO [EC1] 40 x 2m QT50/25 10 x 50m Q60 SO [EC6 (Coiled)] 2 x 32m coils QT50/ 4 x 50m Q75 SO [EC3] 40 x 2m QT50/85 3 x 50m Q(Z)100 SO [(Z)EC5] 30 x 2m QT100/35 4 x 100m Q100 SOC (as above Coiled) 2 x 32m coils QT100/40 3 x 100m Q150 SO [EC9] 20 x 2m QT100/48 3 x 100m Q SI [EC4] 25 x 2m TCT400 Boxes of 4 Q(Z) SI [(Z)EC14 (2mm)] 14 x 2m UCS1 & ZUCS1 40 x 2m Q(Z) SIC (as above Coiled) 2 x 16m coils UCS2 40 x 2m Q(Z) SI [(Z)EC14 (2.5mm)] 14 x 2m UCS2 (Coiled) 3 x 25m coils Q(Z) SIC (as above Coiled) 32m coil Weldrod (Coiled) 6 x 80m coils PVC TRANSITIONS * FULL BOX PACKING SPECIFICATIONS CODE Packing Spec CODE Packing Spec QAB1 10 x 2.75m QT200 [EBS1] 5 x 25m QAB2 (Punched) 10 x 2.75m QT250 [EBS2] 5 x 25m QAB2 (Unpunched) 10 x 2.75m QT320 [EBS3] 5 x 25m QCJ50 3 x 15m QT200/50 [EBS4] 3 x 25m QCJ75 2 x 15m QT450/25 [EBS5] 5 x 25m QD35/5 25 x 2m QT450 [QR/4.5] 50 x 2m QD35/ x 2m QT600 [QR/6] 50 x 2m QFT450 [FR/4.5] 50 x 2m QTL36 10 x 2.75m QFT x 2m QTR10 5 x 2m QMS1 20 x 2m QTR42 10 x 2.75m QMS2 10 x 2m QTR45 10 x 2.75m QMS3 3 x 25m QVB1 10 x 2.75m QR40/5 25 x 2m QVB2 10 x 2.75m QR46/ x 2m QVB3 10 x 2.75m *Some profile/colour combinations subject to minimum order quantity. Check prior to ordering. 41 SALES & TECHNICAL SUPPORT

43 STOCK LENGTHS & FINISHES STAIR NOSING CODE 2.44m 2.75m 3.2m HB1 ** HB157 HB2 HC2 HF1 ** HF153 HF2 HG1 ** HPB HR1 HR153 HR2 QR-HB136* QR-HC1* QR-HF1* QR-HF153* QR-HR1* QR-SB136* QR-SB136R* QR-SC140* QR-SC140R* QR-SF1* QR-SF125R* QR-SF153* QR-SF153R* QR-SR1* QR-SR125R* QRu-HF1* QRu-HR1* QRu-SF1* QRu-SF125R* QRu-SR1* QRu-SR125R* SB1 SB136 SB2 SF1 ** SF125R ** SF126L SF153 SF160R SF225R SF226L SR1 SR125R SR126L SR153 SR160R SR225R SR226L ZB1 ZF1 ZF2 ZHB1 ZHF1 ZR1 ZR2 Packs 15 x 1.22m Gold Anodised 3.2m STAIR NOSINGS Quick Silver Q Range Anodised Finish All aluminium Stair Nosings are available cut to size, drilled or undrilled. All Stair Nosings are also available with polished finish. Flexible PVC Nosings (ESN Range) are available in 2m lengths only, packed 10 lengths per box (ESN1&5 14/ box). PVCu Nosings all profiles available in 2.44m, 2.75m and 3.2m. Special sizes between 1.5m and 3.5m (100mm intervals) available for orders over 50 pieces (confirm at time of order). Also cut to size, drilled or undrilled. * Not curvable ** Gold Anodised stock item info@quantumflooring.co.uk 42

44 COLOUR CHART STAIR NOSINGS TREAD & CHANNEL (PVCu)* Colour Description Q Range H / S / Z PVCu Flexible LR Tread Treads Channel PVC Value** Black 6.34 White Light Grey Flint Granite Regency Dark Blue Royal Blue Sky NEW Polar Grey Peat Rustic Fawn Ivory Spruce Jade.73 Lime NEW Yellow Sun NEW Poppy Claret 6.16 Photoluminescent * * Photoluminescent tread is priced differently to standard treads, for more info call PVC ACCESSORIES & TRIMS*** Colour Description Skirtings Coving Caps LR Value** Black 6.34 White Platinum Grey Cloud Grey.00 Graphite Charcoal Ivory Caramel Boulder Jade.73 Regency Terracotta Dark Brown 7.00 PVC TRANSITIONS*** Colour Description Tops (QTL36/ Trims/Ramps/ LR QTR42/QTR45) Bevels Value** Black 6.34 White Cloud Grey.00 Charcoal Dark Brown 7.00 Light Grey Flint Rustic Spruce Regency Peat **Light Reflectance Value. ***Some profile/colour combinations subject to minimum order quantity. Check prior to ordering. Colours shown here are for guide purposes only and are only as accurate as the printing process allows. For an exact match to your requirements, always request a sample. 43

45 ORDER PROCEDURE CUT, DRILLED OR UNDRILLED Order quantity, code and colour (p43) with cutting schedule. (Call Quantum Flooring, local ASM, or Distributor for site measures). Also state if Stair Nosings are to be drilled. Example: (Nos.) pieces SF1 Black as per cutting list - drilled with plugs. TREAD Unless otherwise specified, all Stair Nosings will be supplied with standard internal grade tread. Example: (Nos.) pieces HR1 Black as per cutting list - tread loose, channel drilled. STOCK LENGTHS Order quantity, code, colour (p43) and length (p42). Also state if Stair Nosings are to be drilled. Example: (Nos.) lengths of HF2 Regency at 3.2m - drilled. Z RANGE PACKS (Z-Range only p22) Order by code and state Pack. Example: (Nos.) ZR1 Pack(s) STAIR NOSINGS PVC ACCESSORIES & TRIMS FULL BOXES (p41) Order quantity of boxes by code and colour (p43). Example: (Nos.) box(es) of UCS1 Cloud Grey. SPLIT BOX (SURCHARGEABLE) Order quantity of lengths by code and colour (p43). Example: (Nos.) lengths of Q100 SO Black. PVC TRANSITIONS FULL BOXES (p41) Order quantity of boxes by code and colour (p43). Example: (Nos.) box(es) of QMS1 Black. FULL TUBES (p41) Order quantity of tubes of tops by code and colour (p43), plus equivalent number of tubes of required base profile. Example: (Nos.) tube(s) of QTR42 Regency & (Nos.) tube(s) of QVB1 Base. SPLIT TUBE (SURCHARGEABLE) Order quantity of lengths by code and colour (p43). Example: (Nos.) lengths of QTL36 Black & (Nos.) lengths of QAB1 Base. info@quantumflooring.co.uk 44