PRODUCT SPECIFICATION GUIDE

Transcription

1 WETROOMS PRODUCT SPECIFICATION GUIDE NEW LINEAR SCREED DRAIN SECTION AVAILABLE CLICK HERE PEACE OF MIND GUARANTEED

2 Introduction CCL Wetrooms are the UK s leading wetroom specialist offering a range of innovative products designed to create stylish contemporary wetrooms, backed up by our unique lifetime guarantee. With over 30 years experience in waterproofing, our unrivalled track record allows us to continually lead the way in wetroom design whilst embracing the latest technology combined with exceptional customer support. Our comprehensive range of products are designed to offer a variety of solutions for Architects and Designers whilst overcoming the challenges presented by today s modern floor structures. Why we are different CCL Wetrooms understand that creating the perfect wetroom is not just about designing the right product or offering the best service. We offer our customers a complete wetroom solution which includes design, specification and the option of a fully guaranteed installation, plus full technical support whenever it s required. Our involvement in a project from conception to completion ensures quality is never compromised. CCL Wetrooms deliver peace of mind - Guaranteed 1

3 Manufacturer As a leading UK manufacturer our products are designed specifically for the UK market and fully tested to the highest possible standards. Our research and development team are continually innovating and improving, ensuring that we are able to offer a wetroom solution in virtually any situation. In addition to our own manufactured products we are the exclusive distributors of products such as Tilesafe and Screedsafe as well as offering other specialist waterproofing solutions. Advantages of a wetroom Stylish, contemporary design providing a luxury feel to any bathroom. Efficient use of space creating the feeling of a large open area. Easy to use and keep clean with little maintenance required. less design possibilities by not being limited to set dimensions. Accessible for all - allowing bathrooms to meet the latest fully inclusive design criteria and legislation. DESIGN & SPECIFICATION SERVICE As part of our commitment to our customers CCL Wetrooms offer a comprehensive professional design and specification service from the planning stages of a project, right through to design and on-site support, including: Project design, advice and guidance Technical drawings and specification On-site training and support Bespoke design and manufacture CPD based technical seminars Key We have developed a simple key to help guide you through the product selection process. Throughout our literature you will find the following symbols indicating key features and benefits: Suitable for solid floors Maximum flow rate (L/min) 29 Suitable for timber floors BBA certification INSTALLATION Our extensive experience has shown us that some customers desire the peace of mind of having a complete supply and fit service from the manufacturer, therefore ensuring that responsibility for the installation lies at one point. With this in mind we are able to offer a supply and fit service through our sister company providing the following services; WETROOMS UK GUARANTEE LIFETIME G U A R A N T E E Lifetime Guarantee De-Coupling properties Bespoke design available Product installation 10 year installation guarantee Optional 10 year insured guarantee 2 3

4 CONTENTS SECTION 1 LINEAR DRAINS NEW LINEAR SCREED DRAIN SECTION AVAILABLE CLICK HERE SECTION 2 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR SECTION 3 FLOOR FORMERS 3.1 LINEAR WET-DEC 3.2 WET-DEC SECTION 4 WATERPROOFING 4.1 RIW TILESAFE 4.2 RIW SCREEDSAFE 4.3 RIW FWM SECTION 5 INSTALLATION 5.1 INSTALLATION WE RE HERE TO HELP 4 5

5 2.1 MODULAR WET-FLOOR Finished Product The Modular Wet-Floor system is a unique concept in wetroom technology that can be used in a number of configurations to create a wetroom on a timber floor. The system is versatile and cost effective and can be installed with the linear drain in either the centre of the shower area, or neatly positioned against the wall. Consisting of three main elements, the Modular Wet-Floor is simple to configure. Start by selecting the required number of Drainage Components and Tapered Boards, then simply choose the appropriate Floor or Wall Grill to suit your wetroom layout. The Drainage Component and Tapered Boards can then be easily trimmed on-site, making the whole system quick and easy to install. 2.1 MODULAR WET-FLOOR Key features Modular system Easily trimmed Quick and easy to install One or two way fall Ideal for large format tiles Floor or wall grill option Variable waste position Flow rate up to 68 L/min Height adjustable grill Lifetime guarantee GUARANTEE LIFETIME G U A R A N T E E SEC. 2.1 p1

6 2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR SYSTEM COMPONENTS 1 DRAINAGE COMPONENT 2.1 MODULAR WET-FLOOR The Modular Wet-Floor system comprises of three main elements: 1 Drainage Component 2 Tapered Board 3 Floor/Wall Grill 1 Select the required number of drainage components. Manufactured from tough ABS plastic, the Drainage Component is the central element of the Modular Wet-Floor, once its position has been decided, the remainder of the system is built around it. Forming a base for the Linear Drain, the Drainage Component has a 1mm gradient towards the centre and can be installed in either an offset or central position The Trap within the shower area, or neatly up against the wall to create a sleek and unobtrusive wall drain*. The Drainage Component can be easily trimmed by up to 200mm off each end using a hand saw and is secured using the pre-drilled screw ports. Two Drainage components can also be butted together to create a larger wetroom area. *When installed with the Wall Grill, the Drainage Component width is reduced by 80mm, to 220mm. 2.1 MODULAR WET-FLOOR 2 Select the required number of Tapered boards. + The trap has an adjustable ball joint and comes with removable dip-tube. For ease of installation it can be fitted anywhere within the central section of the Drainage Component, making it simple to avoid joists and other such obstructions. Floor or wall grill option Trimmable Variable waste position Multi-directional outlet 50mm Water seal BS1455 / Select the appropriate floor or wall grill, along with the correct number of traps depending on the required flow rate. + No. of Traps A single trapped Modular Wet- Floor has a flow rate of up to 27 L/min* When a higher flow rate is required an additional trap can be installed, allowing up to 50 L/min*. One TRAP Two TRAPS For higher flow rates a third trap can be installed giving up to 68 L/min*. THREE TRAPS FLOW RATES No. of wastes No. of traps The drainage component and Tapered boards can then be easily trimmed on site. * See flow rate chart for full details. 68 Stone / Solid-infill Slotted / Square Holes SEC. 2.1 WE re HERE TO HELP SEC. 2.1 p2 p3

7 2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR 2 TAPERED BOARD 3 GRILL TYPE 2.1 MODULAR WET-FLOOR The Tapered Boards are manufactured from XPS foam with a mineral coating, making them both lightweight and easy to handle, whilst maintaining good thermal properties and compressive strength. Each board is 1200mm long and tapered from 22mm to 11mm, giving a consistent gradient every time. Available in five widths, the boards can be easily trimmed to size using a hand saw and should be secured with the fixing washers supplied, at a minimum of 300mm centres. The system is designed with versatility in mind and can be installed in a number of different configurations. See pages 7 to 10 for the most common layouts. Using a combination of boards, either a one way fall towards the wall, or a two way fall with a central or offset drain can be created. Two or more Tapered Boards can also be butted together to create a larger wetroom area. A 280mm x 300mm infill panel is available for use in certain configurations. Designed for timber floors One or two way fall Wetroom area can be varied to suit Easily trimmed Fixing washers included Quick and easy to install Ideal for large format tiles There are two types of grill available within the Modular Wet-Floor system, both are designed to fit onto the Drainage Component. Floor Grill For installation in either an offset or central position within the shower area. Grill width 58mm Wall Grill For installation against the wall. Grill width 86mm FLOOR GRILL WALL GRILL 2.1 MODULAR WET-FLOOR Grill length Tapered Boards are available in 6 standard sizes: A B The Drainage Component is manufactured with one trough size at 660mm, all lengths of grill are then fitted onto this trough. The grill is available in nine standard sizes; two grills can be butted together to create a larger wetroom area (excluding 600mm grill). 600mm 800mm 900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 9 GRILL LENGTHS 300mm x 1200mm 500mm x 1200mm 700mm x 1200mm 1000mm x 1200mm 1200mm x 1200mm 1500mm x 1200mm Bespoke grills can be manufactured for sizes in between and over those that are standard. Please contact our technical team to discuss your requirements. Infill Panel 280mm x 300mm SEC. 2.1 WE re HERE TO HELP SEC. 2.1 p4 p5

8 2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR 3 GRILL TYPE - CONTINUED TYPICAL LAYOUTS 2.1 MODULAR WET-FLOOR Grill Finish The grill is available in various different finishes. All are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish. Type A Solid Grill is supplied as standard unless otherwise specified. Type A - Solid Grill: Grained stainless steel with a 3mm gap around the grill for a sleek stylish finish. Type B - Oblong Slots: Three rows of oblong slots in a grained stainless steel finish. Type C - Square Holes: Three rows of squares in a grained stainless steel finish. Type A TYPE B TYPE C The Modular Wet-Floor is an extremely versatile system which can be installed in many possible combinations. The following examples show typical wetroom layouts that can be achieved, for further assistance please contact our technical team who will be pleased to advise. LAYOUT 1 LAYOUT MODULAR WET-FLOOR Type S - Stone-infill Allows a section of tile to be inserted to provide a sleek continuous look. Suitable for 10-12mm stone / porcelain tiles. Bespoke depths available to order. TYPE S Height & Width adjustment The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to 20mm. Height LAYOUT 3 LAYOUT 4 Additional spacers are available upon request for tiles thicker than 20mm. The Wall Grill is width adjustable to allow for different wall tile thicknesses. WIDTH SEC. 2.1 WE re HERE TO HELP SEC. 2.1 p6 p7

9 2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR TYPICAL LAYOUTS Examples showing typical wetroom layouts that can be achieved (continued). PRODUCT DETAILS IMAGE DESCRIPTION SIZE PRODUCT REF 2.1 MODULAR WET-FLOOR LAYOUT 5 LAYOUT 6 DRAINAGE COMPONENT 1 Drainage Component with 1 trap. Maximum flow rate 27 L/min Drainage Component with 2 traps. Maximum flow rate 50 L/min Drainage Component with 3 traps. Maximum flow rate 68 L/min 1200mm x 300mm 1200mm x 300mm 1200mm x 300mm MDC-1 MDC-2 MDC MODULAR WET-FLOOR For layout 5 we recommend a maximum width of 1700mm, for widths greater than this use two Drainage Components, as layout 7. LAYOUT 7 For layout 6 the minimum width required is 1700mm LAYOUT 8 TAPERED BOARD Tapered board 22mm-11mm Infil Panel 300mm x 1200mm 500mm x 1200mm 700mm x 1200mm 1000mm x 1200mm 1200mm x 1200mm 1500mm x 1200mm 280mm x 300mm MTB-03 MTB-05 MTB-07 MTB-10 MTB-12 MTB-15 MIP-1 2 Additional fixing washers Pack of 50 MFW-1 For layout 7 the minimum width required is 1700mm For layout 8 the minimum width required is 1800mm GRILL TYPE 3 Floor Grill Type A - Solid* Wall Grill Type A - Solid* 600mm 800mm 900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 600mm 800mm 900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm MFG-06 MFG-08 MFG-09 MFG-10 MFG-11 MFG-12 MFG-13 MFG-14 MFG-15 MWG-06 MWG-08 MWG-09 MWG-10 MWG-11 MWG-12 MWG-13 MWG-14 MWG-15 *The Type A Solid Grill is supplied as standard, for alternative grill finishes please see page 6 SEC. 2.1 WE re HERE TO HELP SEC. 2.1 p8 p9

10 2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR HOW TO SPECIFY WATERPROOFING To specify your Modular Wet-Floor first decide the layout of your wetroom, then simply follow the three step process: It is essential that the floor is waterproofed or tanked using the following membranes. IMAGE DESCRIPTIOn PRODUCT REF Step 1 Select the required number of Drainage Components and Traps Step 2 Select the required number and size of Tapered Boards Tilesafe A superior waterproof membrane designed for use in wetrooms, prior to the application of ceramic tiles and natural stone 2. TSK-5 (5m 2 kit) TSK-10 (10m 2 kit) 2.1 MODULAR WET-FLOOR Step 3 Select the required Floor or Wall Grill Note: The Drainage Component and Tapered Boards can be easily trimmed on-site. Two Drainage Components and Grills can be butted together to create a larger wetroom area. EXAMPLES EXAMPLE 1. A: 1500mm, B: 1200mm EXAMPLE 2. A: 2400mm, B: 1420mm Self-adhesive Lifetime Guarantee Quick and easy to install De-coupling and acoustic properties FWM A liquid membrane designed for waterproofing walls, fully compatible with Tilesafe and Screedsafe 2. FWM-8 (8kg) 2.1 MODULAR WET-FLOOR EXAMPLE CONFIGURATIONS: B A B A 1 For full technical details please refer to section 4 For timber floors we would recommend the Tilesafe membrane is applied to the entire wetroom floor. FWM should then be applied to the walls of the shower area plus an additional 300mm and overlapped onto the Tilesafe Reinforcing Tape. STEP 1 Select the required number of components and traps. Drainage Component with 1 trap. MDC x Drainage Component with 1 trap. 2 x MDC-1 + IN DETAIL WALL MEMBRANE OVERLAPS FLOOR MEMBRANE WALL MEMBRANE STEP 2 STEP 3 Select the required number and size of tapered boards and fixings. Select the required floor or wall grill and finish. 1200mm Tapered Board. MTB mm Solid Floor Grill. MFG-06/TYPE A 2 x1200mm Tapered Board. MTB x 800mm Slotted Wall Grill. MWG-08/TYPE B FLOOR MEMBRANE 22mm CHIPBOARD/PLYWOOD TILES ON RAPID FLEXIBLE ADHESIVE 400mm TAPERED BOARD 18mm PLYWOOD WALL MEMBRANE OVERLAPS FLOOR MEMBRANE REINFORCING TAPE TO WALL/FLOOR JUNCTION 50mm x 25mm BATTON SEC. 2.1 p10 WE re HERE TO HELP SEC. 2.1 p11

11 2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR DRAINAGE COMPONENT FLOOR DRAIN 2.1 MODULAR WET-FLOOR TAPERED BOARD A WALL DRAIN 2.1 MODULAR WET-FLOOR INFIL PANEL TRAP TAPERED BOARDS - PERFORMANCE & COMPOSITION Density kg/m Thermal Conductivity w/mk Compressive Strength 3kg/cm 2 (300kN/m 2 ) Water absorption (immersion) Din % by vol Water absorption (capillary) Din Nil Coefficient of linear expansion ASMT D x 10.5 depending on the Flammability Class 0, B1/B2 ( ) conditions of application Full technical data sheet available on request from our technical department. SEC. 2.1 WE re HERE TO HELP SEC. 2.1 p12 p13

12 3.1 LINEAR WET-DEC Finished Product The Linear Wet-Dec pre-formed shower base has been developed specifically to allow the installation of a wetroom on a timber floor. Available in a range of sizes, the dec has a built-in gradient ensuring that water from the shower is directed towards the integral linear drain, giving a sleek and stylish finish. Key features Designed for timber floors Two way fall - suited to large format tiles 9 pre-formed sizes Trimmable Lifetime Guarantee Stylish linear drain Variable waste position Flow rate up to 68 L/min Height adjustable grill The key feature of the Linear Wet-Dec is its two way fall which allows the tiling to be laid without diagonal cuts, therefore making it ideal for use with large format tiles. The integrated linear drain is available with one, two or three traps and a choice of stylish grill finishes. LINEAR WET-DEC 3.1 GUARANTEE LIFETIME G U A R A N T E E SEC. 3.1 p1

13 3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC DEC TRAP LINEAR WET-DEC 3.1 The Linear Wet-Dec is manufactured using a highdensity XPS foam with a mineral coating on both sides, making them both lightweight and easy to handle, whilst maintaining good thermal properties and compressive strength. The Dec has a pre-formed 12mm fall, providing a consistent two way gradient every time. The clever design allows for far higher flow rates than a more traditional four-way fall Dec whilst the linear drain makes it ideal for the installation of large format tiles Each Linear Wet-Dec is supplied with a stainless steel trim for detailing the difference in tile heights where the dec meets the remainder of the bathroom floor - see image for details. Designed for timber floors Two way fall - suited to large format tiles Easily trimmed Lifetime guarantee Variable trap position 22mm Depth FLAT WETROOM FLOOR WET-DEC AND STAINLESS STEEL TRIM STAINLESS STEEL TRIM Stainless steel trim The trap has an adjustable ball joint and comes with removable dip-tube. For ease of installation, it can be fitted anywhere within the central section of the trough, making it simple to avoid joists and other such obstructions. No. of TRAPS Multi-directional outlet Variable position 50mm Water seal 50mm Outlet, supplied with 50mm-42mm reducer BS1455/1566 Easy to maintain TRAP LINEAR WET-DEC 3.1 DEC SIZES DECK AREA A single trapped Linear Wet-Dec has a flow rate of up to 27 L/min*. The trap can be fitted anywhere within the trough. One TRAP Two TRAPS The Linear Wet-Dec is available in 9 sizes: 68 A B 900mm x 900mm - drain 1200mm x 900mm - Centre drain 1200mm x 900mm - drain 1200mm x 1000mm - drain 1500mm x 900mm - drain 1500mm x 1000mm - drain 1800mm x 900mm - drain 1800mm x 900mm - Centre drain 1000mm x 1000mm - drain When a higher flow rate is required a double trap version is available, allowing up to 50 L/min*. For higher flow rates a triple trapped drain is also available. * See flow rate chart for full details THREE TRAPS FLOW RATES 68 No. of wastes No. of traps Stone / Solid-infill Slotted / Square Holes SEC. 3.1 WE re HERE TO HELP SEC. 3.1 p2 p3

14 3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC LINEAR WET-DEC 3.1 grill FINISH The grill is available in various different finishes. All are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish. Type A - Solid Grill is supplied as standard unless otherwise specified. HEIGHT ADJUSTMENT The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to 20mm. HOW TO SPECIFY Type A - Solid Grill: Grained stainless steel with a 3mm gap around the grill for a sleek stylish finish. Type B - Oblong Slots: Three rows of oblong slots in a grained stainless steel finish. Type C - Square Holes: Three rows of squares in a grained stainless steel finish. Type S - Stone-infill: Allows a section of tile to be inserted to provide a sleek continuous look. Suitable for 10-12mm stone / porcelain tiles. Bespoke depths available to order. Additional spacers are available upon request for tiles thicker than 20mm. Type A TYPE B TYPE C TYPE S ADJUSTMENT PRODUCT DETAILS DRAIN PRODUCT IMAGE DESCRIPTION DEC SIZE POSITION REF Single trap Linear Wet-Dec, supplied with solid grill as standard 1 Maximum flow rate 27 L/min Double trap Linear Wet-Dec, supplied with solid grill as standard 1 Maximum flow rate 50 L/min Triple trap Linear Wet-Dec, supplied with solid grill as standard 1 Maximum flow rate 68 L/min 900mm x 900mm 1200mm x 900mm 1200mm x 900mm 1200mm x 1000mm 1500mm x 900mm 1500mm x 1000mm 1800mm x 900mm 1800mm x 900mm 1000mm x 1000mm 900mm x 900mm 1200mm x 900mm 1200mm x 900mm 1200mm x 1000mm 1500mm x 900mm 1500mm x 1000mm 1800mm x 900mm 1800mm x 900mm 1000mm x 1000mm 900mm x 900mm 1200mm x 900mm 1200mm x 900mm 1200mm x 1000mm 1500mm x 900mm 1500mm x 1000mm 1800mm x 900mm 1800mm x 900mm 1000mm x 1000mm Centre Centre Centre Centre Centre Centre LWD 101 LWD 102 LWD 103 LWD 113 LWD 104 LWD 114 LWD 105 LWD 106 LWD 107 LWD 201 LWD 202 LWD 203 LWD 213 LWD 204 LWD 214 LWD 205 LWD 206 LWD 207 LWD 301 LWD 302 LWD 303 LWD 313 LWD 304 LWD 314 LWD 305 LWD 306 LWD 307 LINEAR WET-DEC 3.1 To specify your Linear Wet-Dec, first select the required number of traps (depending on the required flow rate), followed by the grill length and finally the grill finish. Example: A single trap, 1800mm x 900mm, Linear Wet-Dec with solid grill would have the code: LWD 105/Type A Membrane It is essential that the floor is waterproofed or tanked using one of the membranes in the product details on page 6. For timber floors we would recommend the Tilesafe membrane is applied to the entire wetroom floor. FWM should then be applied to the walls of the shower area and overlapped onto the Tilesafe Reinforcing Tape. 1 Type A Solid Grill is supplied as standard. For alternative grill finishes please see page 4. SEC. 3.1 p4 WE re HERE TO HELP SEC. 3.1 p5

15 3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC IN DETAIL WATERPROOFING FLOOR BUILD UP IMAGE DESCRIPTIOn PRODUCT REF Tilesafe A superior waterproof membrane designed for use in wetrooms, prior to the application of ceramic tiles and natural stone 2. Self-adhesive Quick and easy to install Lifetime Guarantee De-coupling properties 5m 2 10m 2 TSK-5 TSK-10 FWM overlaps Tilesafe Membrane FWM FWM A liquid membrane designed for waterproofing walls, fully compatible with Tilesafe and Screedsafe 2. 8kg FWM-8 22mm Chipboard/ Plywood Tilesafe Tiles on rapid flexible adhesive Deck 18mm Plywood Reinforcing Tape to Wall/Floor juntion 50mm x 25mm Batton 400mm LINEAR WET-DEC 2 For full technical details please refer to section 4 TRAP LINEAR WET-DEC FWM (Flexible Wall Membrane) Wall tiles Tilesafe Membrane Tilesafe Primer Floor tiles SEC. 3.1 WE re HERE TO HELP SEC. 3.1 p6 p7

16 3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC LWD x 900mm LWD x 900mm LWD x 900mm LWD x 900mm LWD x 900mm LWD x 1000mm LWD x 1000mm LINEAR WET-DEC LINEAR WET-DEC LWD x 900mm LWD x 1000mm SEC. 3.1 WE re HERE TO HELP SEC. 3.1 p8 p9

17 3.2 WET-DEC Finished Product The Wet-Dec is a pre-formed shower base developed specifically to allow the installation of a wetroom onto a timber floor. Available in a range of sizes, the Wet-Dec has a built-in gradient ensuring that water from the shower is directed towards the drain outlet. The Wet-Dec has a built-in four-way fall which provides a consistent gradient, making it ideal for use with mosaic tiles. Each Wet-Dec is supplied with our height adjustable shower drain which is available in a choice of stylish finishes. Key features 3.2 WET-DEC Designed for timber floors Four-way fall - suited to mosaic tiles 8 pre-formed sizes Trimmable Lifetime Guarantee Flow rate up to 27 L/min Height adjustable grill Flexible drain outlet GUARANTEE LIFETIME G U A R A N T E E SEC. 3.2 p1

18 3.2 WET-DEC 3.2 WET-DEC DEC TRAP The Wet-Dec is manufactured using a high-density XPS foam with a mineral coating on both sides, making them both lightweight and easy to handle, whilst maintaining good thermal properties and compressive strength. The four-way fall provides a consistent gradient of approximately 12mm to the drain, making it ideal for the installation of mosaic tiles. WET-DEC COMPONENTS The trap has an adjustable ball joint for ease of installation and comes with removable dip-tube. The trap is located within the base component which comes undrilled allowing for extra flexibility. Multi-directional outlet 50mm Water seal 50mm Outlet, supplied with 50mm-42mm reducer BS1455/1566 Easy to maintain Flow rate up to 27 L/min TRAP WITH GRILL AND DRAIN grill FINISH 3.2 WET-DEC Designed for timber floors Four-way fall - suited to mosaic tiles 8 pre-formed sizes Can be trimmed by up to 50mm Lifetime guarantee 22mm Depth The grill is available in various different finishes. All are manufactured in 316 marine grade stainless steel, ensuring a stunning high quality finish. Type A Solid Grill is supplied as standard unless otherwise specified. Type A - Solid Grill: Grained stainless steel with a 5mm gap around the grill for a sleek stylish finish. Type B - Oblong slots: Rows of oblong slots in a grained stainless steel finish. Type A TYPE B 3.2 WET-DEC DEC SIZES The Wet-Dec is available in 8 sizes: 27 A B 900mm x 900mm 1000mm x 1000mm 1200mm x 1200mm 1200mm x 900mm 1200mm x 1000mm 1500mm x 900mm 1500mm x 1000mm 1800mm x 900mm HEIGHT ADJUSTMENT The grill is height adjustable in 1mm increments to suit tile thicknesses of 6mm to 20mm. Type S - Stone - Infill Grill: Allows a section of tile to be inserted to provide a sleek continuous look. Suitable for 10-12mm stone/porcelain tiles. Bespoke depths available to order. Additional spacers are available upon request for tiles thicker than 20mm. TYPE S ADJUSTMENT SEC. 3.2 WE re HERE TO HELP SEC. 3.2 p2 p3

19 3.2 WET-DEC 3.2 WET-DEC WATERPROOFING IMAGE DESCRIPTION DEC SIZE PRODUCT REF Wet-Dec, Maximum flow rate 27 L/min. 900mm x 900mm 1000mm x 1000mm 1200mm x 1200mm 1200mm x 900mm 1200mm x 1000mm 1500mm x 900mm 1500mm x 1000mm 1800mm x 900mm WD10 WD11 WD12 WD20 WD21 WD22 WD23 WD24 HOW TO SPECIFY To specify your Wet-Dec, first select the required size of shower area, followed by the grill height and finally the grill finish. Example: 1200mm x 900mm Wet-Dec with Stone- Infill grill would be code: WD20/Type S Membrane It is essential that the floor is waterproofed or tanked using one of the membranes in the product details on page 4. For timber floors we would recommend the Tilesafe membrane is applied to the entire wetroom floor. FWM should then be applied to the walls of the shower area and overlapped onto the Tilesafe Reinforcing Tape. Tilesafe A superior waterproof membrane designed for use in wetrooms, prior to the application of ceramic tiles and natural stone 2. Self-adhesive Quick and easy to install Lifetime Guarantee De-coupling and acoustic properties 5m 2 10m 2 TSK-5 TSK-10 IN DETAIL CROSS SECTION SHOWING WET-DEC and overlapping FWM 3.2 WET-DEC FWM A liquid membrane designed for waterproofing walls, fully compatible with Tilesafe. 8kg FWM-8 FWM overlaps Tilesafe Membrane FWM 3.2 WET-DEC 2 For full technical details please refer to Section 4 22mm Chipboard/ Plywood Tilesafe Tiles on rapid flexible adhesive Deck Reinforcing Tape to Wall/Floor juntion FWM (Flexible Wall Membrane) Wall tiles 18mm Plywood 50mm x 25mm Batton Tilesafe Membrane 400mm Tilesafe Primer Floor tiles SEC. 3.2 p4 WE re HERE TO HELP SEC. 3.2 p5

20 3.2 WET-DEC 3.2 WET-DEC TRAP WD x 1200mm WD x 900mm WD x 1000mm WD x 900mm 3.2 WET-DEC 3.2 WET-DEC WD x 900mm WD x 1000mm WD x 1000mm WD x 900mm SEC. 3.2 WE re HERE TO HELP SEC. 3.2 p6 p7

21 4.1 RIW TILESAFE PRODUCT DETAIL Tilesafe Membrane Tilesafe Primer Floor tiles Tilesafe is a self-adhesive waterproof membrane designed for use prior to the application of ceramic tiles and natural stone onto timber and solid floors in wetrooms and other critical areas. Tilesafe comprises a self-adhesive cold applied waterproof membrane which consists of a thick rubberised waterproof layer incorporating a woven glass fibre mesh on one side.tilesafe is quick and easy to apply, providing a consistent waterproof layer that is guaranteed not to leak. Tilesafe will also act as an effective de-coupling membrane by uncoupling the floor tiles and accommodating movement in the substrate. Tilesafe acts as an acoustic barrier and will improve the sound impact insulation value (ΔLw) of a wet room typical floor assembly by 11dB. The tests were conducted in accordance with BS EN ISO with the results (ΔL) rated in accordance with BS EN ISO Key features Lifetime guarantee Suitable for timber and solid floors Self-adhesive - quick and easy to apply Ready to tile immediately Ideal for fast track construction Supplied as a kit De-coupling properties Acoustic properties Factory controlled thickness RIW TILESAFE 4.1 GUARANTEE LIFETIME G U A R A N T E E SEC. 4.1 p1

22 4.1 RIW TILESAFE 4.1 RIW TILESAFE KIT CONTENTS PRODUCT DETAILS Tilesafe Membrane A self-adhesive waterproof membrane consisting of a 2mm thick rubberised layer, incorporating a woven glass fibre mesh on one side. Width 1 Metre. Tilesafe Reinforcing Tape A 1mm thick self-adhesive tape for reinforcing all wall and floor junctions, butt joints and other detail work in the membrane. Width 150mm. Tilesafe Primer A quick drying acrylic primer for use prior to the application of Tilesafe membrane and Reinforcing Tape. Tilesafe Jointing Compound A high quality polymer based sealant for use at all butt joints, pipe entries, wall and floor junctions. Tilesafe Putty A non-setting self-supporting putty for filling small gaps or voids around pipe entries etc. TILESAFE KIT IMAGE DESCRIPTIOn PRODUCT REF 5m² Tilesafe kit Kit contains 5m x 1m roll of Membrane, 10m Reinforcing Tape, 500ml Primer, 310ml Jointing compound, 500g Putty 10m² Tilesafe kit Kit contains 10m x 1m roll of Membrane, 15m Reinforcing Tape, 1Ltr Primer, 310ml Jointing compound, 500g Putty TSK-5 TSK-10 Pack of 2 pre-formed corners TSC-2 PRE-FORMED CORNERS Tilesafe Pre-Formed Corners Designed to simplify the installation of Tilesafe. Manufactured from tough but flexible polyethylene, the corner unit is placed into a corner prior to the installation of Tilesafe Reinforcing Tape at wall/floor junctions. PRE-FORMED CORNERS 7.5m Roll of Reinforcing Tape TSR-7.5 RIW TILESAFE Tilesafe Reinforcing Tape For wall membrane use FWM. Please refer to section 4.2 for full details. RIW TILESAFE 4.1 Tilesafe Reinforcing Tape 150mm wide self-adhesive waterproofing tape for sealing critical detail such as wall junctions, soap recesses, pipe boxing and other such areas prior to tiling. Roll length 7.5m. REINFORCING TAPE For timber floors we recommend that the Tilesafe membrane is applied to the entire wetroom floor. For solid floors we recommend that the Tilesafe membrane is applied to the shower area plus an additional one metre in either direction. FWM should then be applied to the walls of the shower area and overlapped onto the Tilesafe Reinforcing Tape. Care should be taken to ensure the temperature is at least 10 C. Conditioning of the membrane in a warm area prior to use will enhance its adhesion properties during application. 4.1 SEC. 4.1 WE re HERE TO HELP SEC. 4.1 p2 p3

23 4.1 RIW TILESAFE 4.1 RIW TILESAFE IN DETAIL TILESAFE MEMBRANE in typical WETROOM CONSTRUCTION Tilesafe is a unique, pre-formed flexible self-adhesive waterproof membrane that will accommodate differential movement between building elements, which is the principal weakness in alternative systems. It is, therefore, ideal for use on modular and lively substrates, such as timber, masonry, concrete, plasterboards, gypsum and existing ceramic or natural stones. Once applied Tilesafe is ready to tile immediately. Tilesafe will also act as an effective de-coupling membrane, uncoupling the floor tiles from the substrate and assisting in counteracting the tensions that are present from differential movement between the substrate and the tiles. Similarly, static, dynamic or stress cracks present in the substrate are bridged, therefore reflective cracking through the tile is prevented. Tilesafe Reinforcing Tape Tilesafe is cold applied, consisting of a 2mm thick rubberised waterproof layer, incorporating a woven glass fibre mesh on one side. It has been developed for use prior to the fixing of ceramic tiles and natural stone, applied using a flexible rapid-set tile adhesive, which keys to the mesh. As the adhesive dries it forms a strong permanent bond through the mesh and directly onto the waterproof layer. Tilesafe acts as an acoustic barrier and will improve the sound impact insulation value (ΔLw) of a wet room typical floor assembly by 11dB. Specification M40 Stone/Concrete/Quarry/Ceramic Tiling/Mosaic. FWM (Flexible Wall Membrane) Tilesafe Membrane Wall tiles TILESAFE PERFORMANCE & COMPOSITION Tilesafe Primer Floor tiles Membrane thickness Joint Tape thickness Adhesion Water vapour transmission Tensile strength (ASTM D1000) Pull off adhesion (ASTM C907) Sheer adhesion 2mm 1mm 2N/mm 0.5g/m² / 24 hours 12N/mm 81N 115N RIW TILESAFE 4.1 DE-coupling performance RIW Tilesafe acts as an effective de-coupling or anti fracture membrane up to a gap of 2.25mm¹ by assisting in counteracting the tensions that are present from differential movement between the substrate and the tiles. ACOUSTIC performance Tilesafe acts as an acoustic barrier and will improve the sound impact insulation value (ΔLw) of a wet room typical floor assembly by 11dB. The tests were conducted in accordance with BS EN ISO with the results (ΔL) rated in accordance with BS EN ISO For timber floors we recommend that the Tilesafe membrane is applied to the entire wetroom floor. For solid floors we recommend that the Tilesafe membrane is applied to the shower area plus an additional one metre in either direction. FWM should then be applied to the walls of the shower area and overlapped onto the Tilesafe Reinforcing Tape. RIW TILESAFE 4.1 ¹ Data provided by an independent UKAS accredited testing laboratory. Tilesafe was subjected to product validation testing using a calibrated data logger. The tests were carried-out with a fully installed floor assembly with the 2mm Tilesafe Membrane applied directly to a concrete substrate, with 12mm Travertine Tiles adhered directly to the Tilesafe Membrane. Full technical data available on request from our technical department. SEC. 4.1 WE re HERE TO HELP SEC. 4.1 p4 p5

24 4.2 RIW SCREEDSAFE PRODUCT DETAIL Membrane) Screedsafe Membrane Screedsafe Primer Floor tiles Screedsafe is a self-adhesive waterproof membrane designed for use prior to the application of ceramic tiles, and natural stone onto concrete and screeded in wetrooms and other critical areas. Screedsafe is quick and easy to apply, providing a consistent waterproof layer that is guaranteed not to leak. Screedsafe comprises a self-adhesive cold applied waterproof membrane which consists of a 1mm rubberised waterproof layer incorporating a woven fabric on one face. Key features Lifetime guarantee Suitable for concrete and screeded floors Self-adhesive - quick and easy to apply Ready to tile immediately Ideal for fast track construction Supplied as a kit Factory controlled thickness RIW SCREEDSAFE 4.2 GUARANTEE LIFETIME G U A R A N T E E SEC. 4.2 p1

25 4.2 RIW SCREEDSAFE 4.2 RIW SCREEDSAFE KIT CONTENTS PRODUCT DETAILS Screedsafe Membrane A self-adhesive membrane consisting of a 1mm thick rubber modified bitumen waterproof layer, incorporating a woven fabric on one face Width 1 Metre. Screedsafe Reinforcing Tape A 1mm thick self-adhesive tape for reinforcing all wall and floor junctions, butt joints and other detail work in the membrane Width 150mm. Screedsafe Primer A bitumen solution for coating surfaces prior to the application of Screedsafe membrane and Reinforcing Tape. Screedsafe Jointing Compound A high quality polymer based sealant for use at all butt joints, pipe entries, wall and floor junctions. SCREEDSAFE KIT IMAGE DESCRIPTIOn PRODUCT REF 5m² Screedsafe kit Kit contains 5m x 1m roll of Membrane, 7.5m Reinforcing Tape, 500ml Primer, 310ml Jointing compound. 10m² Screedsafe kit Kit contains 10m x 1m roll of Membrane, 15m Reinforcing Tape, 1Ltr Primer, 310ml Jointing compound. SSK-5 SSK-10 Pack of 2 pre-formed corners SSC-2 PRE-FORMED CORNERS Screedsafe Pre-Formed Corners Designed to simplify the installation of Screedsafe. Manufactured from tough but flexible polyethylene, the corner unit is placed into a corner prior to the installation of Screedsafe Reinforcing Tape at wall/floor junctions. PRE-FORMED CORNERS 7.5m Roll of Reinforcing Tape SSR-7.5 RIW SCREEDSAFE SCREEDsafe Reinforcing Tape For wall membrane use FWM. Please refer to section 4.3 for full details. RIW SCREEDSAFE 4.2 Screedsafe Reinforcing Tape 150mm wide self-adhesive waterproofing tape for sealing critical detail such as wall junctions, soap recesses, pipe boxing and other such areas prior to tiling. Roll length 7.5m. REINFORCING TAPE For solid floors we recommend that the Screedsafe membrane is applied to the shower area plus an additional one metre in either direction. FWM should then be applied to the walls of the shower area and overlapped onto the Screedsafe Reinforcing Tape. Care should be taken to ensure the temperature is at least 10 C. Conditioning of the membrane in a warm area prior to use will enhance its adhesion properties during application. 4.2 SEC. 4.2 WE re HERE TO HELP SEC. 4.2 p2 p3

26 4.2 RIW SCREEDSAFE 4.2 RIW SCREEDSAFE IN DETAIL SCREEDSAFE MEMBRANE in typical WETROOM CONSTRUCTION Screedsafe is a unique, pre-formed flexible self-adhesive waterproof membrane that will accommodate differential movement between building elements, which is the principal weakness in alternative systems. It has been developed for use prior to the fixing of ceramic tiles and natural stone, applied using a flexible rapid-set tile adhesive, which keys to the fabric. As the adhesive dries it forms a strong permanent bond. It had been designed specifically for use on concrete and screeded floors. Once applied Screedsafe is ready to tile immediately. Screedsafe is cold applied, consisting of a 1mm thick rubber modified bitumen waterproof layer, incorporating a woven fabric on one face. Screedsafe should only be applied to concrete and screeded floors, under no circumstances should Screedsafe be applied to timber floors. Timber floors should be waterproofed with Tilesafe only. Specification M40 Stone/Concrete/Quarry/Ceramic Tiling/Mosaic. Screedsafe Reinforcing Tape FWM (Flexible Wall Membrane) Wall tiles SCREEDSAFE PERFORMANCE & COMPOSITION Membrane thickness 1mm Joint Tape thickness 1mm Adhesion 1.5Nmm Water vapour transmission 0.5g/m² / 24 hours Tensile strength (ASTM D1000) 8.7N/mm Pull off adhesion (ASTM C907) 84N Sheer adhesion 59N Screedsafe Primer Screedsafe Membrane Floor tiles Full technical data sheet available on request from our technical department. RIW SCREEDSAFE 4.2 For solid floors we recommend that the Screedsafe membrane is applied to the shower area plus an additional one metre in either direction. FWM should then be applied to the walls of the shower area and overlapped onto the Screedsafe Reinforcing Tape. Care should be taken to ensure the temperature is at least 10 C. Conditioning of the membrane in a warm area prior to use will enhance its adhesion properties during application. RIW SCREEDSAFE 4.2 SEC. 4.2 WE re HERE TO HELP SEC. 4.2 p4 p5

27 4.3 RIW FWM PRODUCT DETAIL Tilesafe Reinforcing Tape FWM (Flexible Wall Membrane) Wall tiles Tilesafe Membrane Floor tiles FWM - Flexible Wall Membrane is a flexible coating for waterproofing wall surfaces prior to the application of ceramic tiles and natural stone in wetroom and other critical areas. Key features Lifetime guarantee Solvent-free Quick and easy to apply Compatible with Tilesafe and Screedsafe Suitable for use on all commonly encountered substrates GUARANTEE LIFETIME G U A R A N T E E PRODUCT DETAILS IMAGE DESCRIPTIOn PRODUCT REF RIW FWM 4.3 FWM - Flexible Wall Membrane 8kg Tub FWM-8 SEC. 4.3 p1

28 4.3 RIW FWM 4.3 RIW FWM IN DETAIL FWM in typical WETROOM CONSTRUCTION FWM is a ready-to-use, pale blue, solvent-free, soft paste which bonds perfectly to adhesives used for fixing ceramic tiles and natural stone. It may be used on all commonly encountered wall substrates including plasterboard, gypsum or cementitious render, lightweight cement block and marine plywood. FWM should be applied using a brush or short pile roller to give a continuous thin layer of product at least 1mm thick. Junctions between wall and floor and all corners should be reinforced with Reinforcing Tape. Allow 24 hours before tiling. Should a second coat be necessary, allow to dry for 2 hours between coats. Specification M40 Stone/Concrete/Quarry/Ceramic Tiling/Mosaic. Pack Size: Colour: 8kg Pale blue Coverage: 1kg per m² /coat 8m² per 8kg pack based on 1 coat Tilesafe Reinforcing Tape FWM (Flexible Wall Membrane) Wall tiles FWM PERFORMANCE & COMPOSITION Paste density ikg per m 2 Application temperature Between 5 C and 30 C Service conditions -20 C to +50 C Coat drying time 2 hours touch dry Before tiling 24 hours* Contact with water 7 days Tilesafe Primer Tilesafe Membrane Floor tiles RIW FWM 4.3 *Note: All times refer to site conditions of 20 C. These times will be increased at lower temperatures and reduced at elevated temperatures. The above performance figures are typical values and should not be considered a product specification. Full technical data sheet available on request from our technical department For timber floors we recommend that the Tilesafe membrane is applied to the entire wetroom floor. For solid floors we recommend that the Tilesafe membrane is applied to the shower area plus an additional one metre in either direction. FWM should then be applied to the walls of the shower area plus an additional 300mm and overlapped onto the Tilesafe Reinforcing Tape. RIW FWM 4.3 SEC. 4.3 WE re HERE TO HELP SEC. 4.3 p2 p3

29 5.1 INSTALLATION WETROOMS UK ABOUT US Our extensive experience has shown us that some customers desire the peace of mind of having a complete supply and installation service from the manufacturer, therefore ensuring that responsibility for any subsequent issues lies at one point. With this in mind we are able to offer a unique supply and fit service through our sister company - Wetrooms UK. Wetrooms UK Limited is an efficient, professional and experienced company which designs, supplies and installs wetrooms to the highest specification. The expertise behind the company is based on over 30 years experience in the waterproofing industry. We have worked with highly prestigious clients in the hotel, spa and leisure industries as well as many domestic house developers. This experience enables us to understand your needs to maximise space and create modern, distinctive and beautiful wetrooms, backed up with specialist guarantees and insurances. Key features Consultation and design service Supply and installation Post-application inspection report 10 year installation guarantee Optional 10 year insured guarantee 5.1 INSTALLATION SEC. 5.1 p1

30 5.1 INSTALLATION 5.1 INSTALLATION Bespoke Design and Installation WHAT WE PROVIDE Consultation and Design Our bespoke design service addresses every detail of your wetroom. In addition to creating the right design for each space, we ensure that any potential installation or maintenance issues are eliminated. Supply and Installation With Wetrooms UK you have the peace of mind of our supply and installation service, backed up by our 10 year insured guarantee. Training and After Sales Service From classroom and on-site training, to site inspection and testing, we ensure your trades people work to the same high standards to achieve a quality finish. OUR PORTFOLIO Please see a selection of our clients below. Simplicity and versatility are the key attributes of a fabulous wet room and so too is the bespoke service from Wetrooms UK. From consultation and design through to supply and installation, we ensure that every detail of your wetroom is absolutely right. Working with architects, design teams and site trades, we create the wetrooms to perfectly fit your requirements. With our expertise in design and the exclusive use of premium quality products, you can be confident that your wetroom will continue to look and function like new for years to come. Meeting your expectations to create the ultimate wetroom is our primary focus. This is why our involvement in a project from conception to completion means there is never any compromise on quality. We simply deliver great design and a beautiful finish. Hilton Through our excellent partnership with a leading bespoke glass manufacturer, Wetrooms UK has supplied and installed the wet areas for 75 ensuite bathrooms. OUR GUARANTEE With every installation, Wetrooms UK is able to offer a 10-year company guarantee. In addition we can offer an insured guarantee through Construction Guarantee Services Ltd (CGS), which covers your chosen installation. Savoy For each one of the 110 rooms at this prestigious hotel, Wetroom UK s premium waterproof membrane was the specifier s choice. 5.1 INSTALLATION Regulated by the Financial Services Authority (FSA), CGS is a completely independent organisation. 10 year installation guarantee Optional 10 year insured guarantee Wetrooms UK provide you with peace of mind - guaranteed. Octagon For every luxurious new home developed by Octagon, our products and services are a required specification. 5.1 INSTALLATION SEC. 5.1 WE re HERE TO HELP SEC. 5.1 & p2 p3

31 5.1 INSTALLATION 5.1 INSTALLATION Case Study 1 - The Hotel Case Study 2 - Student Accommodation REQUIREMENTS & ISSUES For this prestigious London hotel, the client requested that all 75 wetrooms had level access and were designed to incorporate large format, whole tiles (without any diagonal cuts for fitting). Each wetroom was also to be fitted with a linear drain with a screed depth of only 60mm from the concrete slab. In addition, the client also required the rooms to be fully waterproofed including full height on the shower walls and one metre on the wall around the bath area. SOLUTION REQUIREMENTS & ISSUES The existing bathroom in this student accommodation in Manchester was in a very poor condition. All 364 pod bathrooms had leaks and the vinyl floor finish was in urgent need of replacing. In addition, the pod floors were of 18mm plywood, constructed on a steel box section frame, which sat on a concrete slab with all drainage above slab level. The client now wanted the whole floor area to run to the drain as pooling water had become a serious issue. Easy access to the waste and trap was also required for cleaning purposes. Due to the existing screed depth and the requirement to provide level access, we used the CCL Wetrooms Linear Screed Drain, with an adapted height-adjustable fixing bracket. The top screed was completely removed in the floor area of the shower (1200mm x 900mm). The concrete slab around the trap and waste area was removed locally to install the trap at the required depth. The screed in the shower area was then re-laid having gained the 12-15mm fall. RIW Tilesafe membrane was then installed to all cornerto-corner junctions on the wall and across the entire floor, finishing 75mm up the wall/floor junction. FWM was applied to full height on the walls in the shower and bath areas - linking to the Tilesafe membrane. SOLUTION The CCL Wetrooms Linear Screed Drain was installed directly into the 18mm ply floor but with a ply-routed plate rather than the standard fixing bracket. Battens were fixed to the existing timber floor and a rapid-set, flexible levelling compound was poured to lay the whole room to falls. The floor was then fully waterproofed with RIW Tilesafe Membrane. CROSS SECTION CROSS SECTION 5.1 INSTALLATION 5.1 INSTALLATION SEC. 5.1 WE re HERE TO HELP SEC. 5.1 & p4 p5

32 5.1 INSTALLATION 5.1 INSTALLATION Case Study 3 - LUXURY HOUSING EXPERT INSTALLATION REQUIREMENTS & ISSUES This client is a specialist developer of prestigious detached properties in prime town and country locations in the Home Counties. There are two types of floor construction for these properties: concrete plank or block and beam with insulation and screed, or timber joists and 22mm floorboards. The required flow rate for the wetrooms must be between 24 litres per minute and 40 litres per minute. All wetrooms are required to have large format tiles or marble slabs. SOLUTIONS For concrete plank or block and beam The CCL Wetrooms Linear Screed Drain was used; however, depending on the flow rate required, the drain was installed with either one or two waste and traps. To ensure a fully waterproofed wet area, RIW Tilesafe Membrane was installed to the entire floor area, finishing 75mm up the wall/floor junction. FW was applied to full height on the shower walls linking to the Tilesafe membrane. For timber joists The CCL Wetrooms Linear Wet-Dec was used for this type of floor construction. The Wet-Dec s are available in a range of sizes and are trimmed to fit the required shower area. An 18mm plywood floor was constructed at joist level with waste and traps installed within the joist space. Up to three of these waste and traps were installed depending on the flow rate required. The Wet-Dec, with its pre-built drainage slopes, then replaced the floorboards in the shower area. Once the Wet-Dec was installed, the area was fully waterproofed with RIW Tilesafe Membrane and FWM to the full height of the walls. CROSS SECTIONS For concrete plank or block and beam For timber joists FWM to walls FWM overlaps Tilesafe Membrane 5.1 INSTALLATION 22mm Chipboard/Plywood Tilesafe Tiles on rapid flexible adhesive 400mm Linear Wet-Dec 18mm Plywood Reinforcing Tape to Wall/Floor juntion 50mm x 25mm Batton 5.1 INSTALLATION SEC. 5.1 WE re HERE TO HELP SEC. 5.1 & p6 p7

33

34 Technical Support For technical assistance please contact our experienced technical department who will be happy to assist in the following; Project design Product specification CAD drawings Method statements Technical Seminars We are able to provide CPD based seminars designed to provide guidance on key wetroom design considerations such as; Design and layout Drainage Waterproofing Flow rates For further information please contact our technical department. Technical Enquiries Tel: Fax: CCL Specialist Supplies Ltd Lodge Farm Hook Road North Warnborough Hook RG29 1HA Technical Advice Our team of technical advisors are able to visit you to provide a professional advisory service and assist with project design and specification. We are also able to attend site to provide technical support and assistance. WETROOMS Installation With over 30 years experience in the waterproofing industry, our involvement in a project from conception to completion ensures that quality is never compromised. Our services include; Design and installation 10 Year Insured Installation guarantee On-site training Installation Enquiries Tel: Fax: enquiries@wetroomsuk.co.uk Wetrooms UK Ltd Lodge Farm, Hook Road North Warnborough Hook RG29 1HA A B ritish S tructural W aterproofing ssociation WETROOMS UK part of the CCL group GROUP OF COMPANIES Peace of MinD Guaranteed