AVK SVMC PRODUCT PROGRAM 2017 THE SOLUTIONS YOU NEED THE STANDARDS YOU EXPECT

Transcription

1 AVK SVMC PRODUCT PROGRAM 2017 THE SOLUTIONS YOU NEED THE STANDARDS YOU EXPECT

2 2 Product program Product program 3

3 Approval Number: Test Report: MAT/LAB 887J & 889J 26 th February 2016 AVK Holding A/S Bizonvej 3, Skovby, DK Galten, Denmark WATER REGULATIONS ADVISORY SCHEME LTD. (WRAS) MATERIAL APPROVAL Water Regulations Advisory Scheme Ltd. Unit 13, Willow Road, Pen y Fan Industrial Estate, Crumlin, Gwent, NP11 4EG The material referred to in this letter is suitable for contact with wholesome water for domestic purposes having met the requirements of BS6920-1: and/or 2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. The reference relates solely to its effect on the quality of the water with which it may come into contact and does not signify the approval of its mechanical or physical properties for any use. RUBBERS - ETHYLENE PROPYLENE DIENE MONOMER (EPDM) - COMPONENTS EUW-70. Black coloured, injection moulded bonnet gaskets, manufactured from EUW-70 EPDM rubber. Shore hardness 70. Tested in-radii sizes between 3.35mm & 7.6mm. For use with water up to 50 C. APPROVAL NUMBER: APPROVAL HOLDER: AVK HOLDING A/S The Scheme reserves the right to review approval. Approval is valid between November 2015 and November 2020 An entry, as above, will accordingly be included in the Water Fittings Directory on-line under the section headed, Materials which have passed full tests of effect on water quality. The Directory may be found at: Yours faithfully Jason Furnival Approvals & Enquiries Manager Water Regulations Advisory Scheme The Water Regulations Advisory Scheme Ltd. Registered in England No, Registered office: 6D Lowick Close, Hazel Grove, Stockport, SK7 5ED Tel:+44(0) Fax:+44(0) info@wras.co.uk website: Page 3 of 3 Certificate Number Report Referencee Issue Date Issued to: Listed Company: Manufacturer This is to certify thatt representative samples of Standard(s) for Safety: Additional Information: Only those products bearing the UL Listing Mark should be considered as being covered by UL' 's Listing and Follow-Up Service. The UL Listing Mark generally includes the following elements: the symbol UL in a circle: with the word LISTED ; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) as indicated in the appropriate UL Directory. Look for the UL Listing Mark on the product. William R. Carney, Director, North American Certification Programs UL LLC Any informationn and documentation involving UL Mark servicess are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at This certificate is issued for the following: Dry Barrel Fire Hydrants Series Modern Series Nostalgic (Modification) Prepared for: AVK International A/S Bizonvej 3, Skovby DK 8464 Galten Denmark Manufactured at: AVK Mittelmann Armaturen GmbH American AVK AVK Saudi Valve Manufacturing Co., Ltd Schillerstrasse Meridian Blvd. Phase 4, Street No. LO 404 D Wuelfrath Minden, NV Jeddah, Kingdom of Saudi Arabia Germany FM Approvals Class: 1510 Fire Hydrants (Dry Barrel Type) for Private Fire Services Approval Identification: Approval Granted: March 9, 2011 Said Approval is subject to satisfactory field performance, continuing follow-up Facilities and Procedures Audits, and strict conformity to the constructions as shown in the Approval Guide, an online resource of FM Approvals. For more than 160 years FM Approvals has partnered with business and industry to reduce property losses. Richard B. Dunne Group Manager -Hydraulics FM Approvals 1151 Boston-Providence Turnpike Norwood, MA March 9, 2011 Date AVK - YOUR LONG-TERM PARTNER EXPECT LASTING INNOVATIONS, QUALITY AND SOLUTIONS Lasting innovations In our development department in Europe, ideas and suggestions for new products are gathered and existing products are continually updated. In co-operation with the end user, the products are field tested before the final market launch, thus achieving the best result in each individual market. Lasting quality AVK is second to none when it comes to rubber compounds, and we have our own vulcanization and coating facilities that enable us to deliver a high, consistent quality and durability. AVK s quality assurance system is certified according to ISO Moreover, we are certified to ISO 14001, the international standard for environmental management, UL,FM & WRAS. Lasting solutions Sustainability is about creating a sustainable business. Our solutions reduce electricity consumption and CO 2 emissions in facilities all over the world. They significantly reduce water wastage because we have put a lot of effort into optimizing our design. AVK has been in the valve business for more than 40 years. Today AVK is a global leader within valves, hydrants, fittings and accessories for water supply, gas supply, wastewater treatment and fire protection. AVK SVMC We specialise in manufacturing different types of gate valves, check valves, fire hydrants and valves accessories. We add numerous products to our range from the more than 20 other AVK factories in Europe as well as from AVK factories worldwide. These AVK factories specialise in other types of valves, hydrants and accessories, and jointly we are capable of offering a very wide selection of high quality products at a competitive price. We benefit from modern production facilities where an optimized flow of goods ensures the fastest possible lead time. We store a large selection of our product range in our warehouse enabling us to offer a great delivery service. AVK Saudi employs more than 110 people located in 3 sites in Saudi Arabia. We are overall the Kingdom. OUR VALUABLE PARTNERS Global leadership and local commitment Our geographical presence and product range is global, but our focus is local. Our customers are serviced by local sales organisations, in AVK s own sales companies or within our carefully selected distributors, who engage in their customers needs. We are therefore able to offer tailor-made solutions that match local specifications. A beneficial partnership We want to build and invest in a long-term partnership with our customers. To earn our role as a long-term partner, we strive to deliver value for money. We deliver error-free, durable and maintenance-free products that constitute the most cost-efficient solution for our partners in the long run. C ERT IFICATE OF C OMP LIAN CE r EX15258 EX e JUNE-05 AMERICAN AVK CO 2155 MERIDIAN BLVD MINDEN NV : SAUDI VALVE MFG CO LTD INDUSTRIAL AREAA PHASE 4 ROAD 404 PO BOX JEDDAH SAUDI ARABIA Hydrants Wet Barrel Hydrants Model Rated Pressure (psig) Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Certificate of Compliance The AVK Group has outlined a number of strict objectives for its manufacturing companies regarding energy and water consumption. But we do not only focus on activities and processes in our manufacturing companies, we also focus on the behaviour and business model of our suppliers. Our suppliers need to comply with a number of standards in order to be a certified supplier of the AVK Group. In a world of intensified globalization, resulting in increasing business relations between countries and cultures, it is vital for AVK to achieve sustainability throughout the supply chain. UL 246, Hydrants for Fire-Protection Service See the UL Online Certifications Directory at for additional information 4 Product program Product program 5

4 EXPECT US TO EXCEED MARKET STANDARDS Expect... AVK In our business there are five cornerstones that must be in place in order to meet customer expectations: Quality, reliability, innovation, sustainability and customer service. But we need to go further than that. We go further to exceed our customers needs and expectations. Expect... AVK means that our customers should rightfully expect us to exceed market standards. Expect... AVK means that we relentlessly strive for increased customer benefits! To ensure that we keep pushing the boundaries of what the market can expect, we have formulated eight promises that we will strive to deliver in all our markets: EXPECT SOLUTIONS, NOT JUST PRODUCTS EXPECT GLOBAL LEADERSHIP AND LOCAL COMMITMENT EXPECT QUALITY IN EVERY STEP EXPECT PROMPT RESPONSE EXPECT LASTING INNOVATIONS EXPECT TOTAL SAVINGS EXPECT A LONG-TERM PARTNERSHIP EXPECT IT TO BE EFFECTIVE AND EASY See more on 6 Product program Product program 7

5 AVK S FOUR CORE BUSINESSES PRODUCT FEATURES AND BENEFITS SWCC Al-Lith Pumping Station Al-Khumra WWTP Masjid al-haram, Makkah Part of vital infrastructures AVK has delivered gate valves to the water supply sector since the company was established in 1969, and today AVK is a major global leader offering an extensive range of valves, hydrants and accessories. In the 70s we obtained our first DVGW approval for gas valves, and due to our high uniform quality and focus on safety and traceability AVK is still a trusted supplier to the gas supply sector worldwide. For wastewater treatment we offer a very wide valve range according to all major standards as well as customized solutions. The AVK Group is among the largest manufacturers of fire hydrants worldwide and our range includes UL/FM/VdS approved hydrants, gate and butterfly valves for fire protection. Water supply Gate valves and accessories, butterfly valves, swing check valves, air valves, hydrants, couplings, fittings etc. Wastewater treatment Gate valves, knife gate valves, ball and swing check valves, butterfly valves, air valves, penstocks and couplings. Two paths to our documentation We have done our utmost to make it easy to find specific product documentation on ( Choose your area of interest in the upper menu. e.g. wastewater, and get an overview of our products within this area. Product finder is coming soon on our website You can also go directly to the product finder and pick your choice in the drop down lists at avkvalves.com Brochures for each of our core businesses are available from our website. They explain the features and benefits of each main product group and give an overview of AVK s range within water supply, wastewater treatment and fire protection. for more information please send an to : Sales@avksvmc.com Product range brochures AVK SVMC products are part of vital infrastructures globally securing: Clean drinking water without contamination or waste of water in the distribution network Efficient handling and cleaning of wastewater from households and industries Reliable fire equipment and water supply enabling firefighters to react fast and efficiently in dangerous situations Gas supply * Please visit for more information about Gas valves Gate valves and accessories, ball valves, butterfly valves, couplings and repair clamps. Fire protection Fire hydrants, monitors, gate valves, post indicators, butterfly valves, check valves and accessories. PDF BROCHURE: AVK Wastewater treatment AVK SVMC WASTEWATER TREATMENT EXPECT A LONG-TERM PARTNERSHIP 8 Product program Product program 9

6 PRODUCTS RANGE FOR WATER SUPPLY PRODUCTS RANGE FOR WATER SUPPLY Series 01/70 -Gate Valve resilient seated with Supa coupling for u PVC and PE pipe - DN40-DN300 -Available with Stainless 01/74) Series 02/60 -Gate Valve resilient -Designed to EN Face to face according to EN558 table 2 series 15 -DN40-DN500 -PN10/16 -Flange drilling to -Available with Stainless 02/63) Series 01/80 -Gate Valve resilient seated with socket ends for PVC pipes -Designed to EN DN40-DN400 -PN16 -Available with Stainless 01/84) Series 06/30 -Gate Valve resilient seated with -Designed to EN Face to face according to EN558 table 2 series 14 -DN40-DN600 -PN10/16 -Flange drilling to EN Available with Stainless 06/34) -Available with Stainless 06/34) Series 02/20 -Gate Valve resilient seated with -Designed to EN Face to face according to EN558 table 2 series 3 -DN50-DN400 -PN10/16 -Flange drilling to EN /21) Series 15/42 seated for actuator with flanged ends EN558 table 2 series 14 - DN40-DN400 EN /43) Series 55/30 seated with EN558 table 2 series 15 - DN450-DN600 & 800 EN /34) by-pass Series 41/36 - Swing Check Valve metal 3 EN558 table 2 series 48 - DN350-DN600 EN1092- Steel 316 shaft (series 41/36 GS) lever and weight Series 41/00 - Swing Check Valve resilient seated with flanged ends - Designed to AWWA C508 ASME B psi ANSI B16.42 Class 150 FF lever and weight Series 41/60 - Swing Check Valve resilient 3 EN558 table 2 series 48 EN1092- Steel 316 shaft (series 41/60 GS) lever and weight Series 40 - Swing Check Valve resilient 3 EN558 table 2 series 10 EN1092- Steel 316 shaft (series 40 GS) lever and weight Series 641/01 - Swing Check Valve metal - Designed to AWWA C EN558 table 2 series 10 - DN700-DN1000 EN1092- Steel 316 shaft (series 641/02) lever and weight Series 15/72 seated for actuator with 15 - DN40-DN500 15/73) Series 33/10- -Gate Valve resilient seated with socket ends for cast iron pipes - DN80-DN300 Series 21/30. Stem seals exchangeable under pressure 3 21/30 GS) Series 36/80 seated with PE 100 pipe ends - DN80-DN400 Series 21/60 seated with EN558 table 2 series 3 - PN25 EN R 21/60 GS) Series 54 -Gate Valve metal seated with. EN558 table 2 series 3 - DN700-DN2400 EN /32) by-pass Series 641/11 - Recoil Check single door with - Designed to manufacturer standard - DN100-DN500 -Flange drilling to - Available with PN25 -Available with Stainless Steel 316 shaft (series 641/12) Series 701/55 - Air Valve double acting with Anti-shock -Designed to EN DN50-DN200 -PN16/25 -Flange drilling to -HDPE floats Series Recoil Check multi door with - Designed to manufacturer standard - DN600-DN Available with PN25 - Available with Stainless Steel 316 shaft (series 642) Series 851/40 - Air Valve single acting 4 - DN25 BSP Steel 316 orifice/float (series 851/44) Series 642 ECV - Check Valve flangeless wafer type 3 & EN12334 EN558 table 2 series 16 -DN50-DN600 Series 851/40 - Air Valve double acting 4 - DN50-DN200 EN1092- Steel 316 orifice/float (series 851/44) 10 Product program Product programme 11

7 PRODUCTS RANGE FOR WATER SUPPLY PRODUCTS RANGE FOR WATER SUPPLY Series 861/11 - Air Valve 3 functions - Anti-water hammer (AS) 4 & AWWA C-512 /25/4 flange drilling Series 861/12 Air Valve 3 functions -Anti-surge (RFP) -Designed to EN & AWWA C-512-DN50 DN400 /25/40 flange drilling Series 854 Ball Float Valve EN Available with Polypropylene or Stainless steel 316 float Series 75 -Butterfly Valve with fully vulcanized rubber line -Designed to EN 593 -Available with different flange drilling -Available with different component materials grades -Available with different manual and motorized actuation Series ATHENA Ball Float Valve - DN40-DN300 steel 316 or 304 float Series 910/21 Y Strainer with flanged ends to EN558 table 2 - Available with PN25 (series 910/11) Series 859 Automatic Control Valve diaphragm type - Designed to EN EN558 table 2 series 1 EN Different controlling types (reducing, sustaining, flow control, altitude, etc ) - Different controlling springs depends on pressure control range - Available with single and multi-functions module Steel 316 pipes and fittings - Available with reduced and full bore bodies Series XLC Automatic Control Valve diaphragm type - Designed to EN EN558 table 2 series 1 /25 - Different controlling types (reducing, sustaining, flow control, altitude, etc ) - Different controlling springs depends on pressure control range - Available with Stainless Steel 316 internals - Available with reduced bore body up to DN150 EVFS - DN40-DN /25 - Double flange to EN 558 series 13 EVTLS - DN50-DN Full-Lugged wafer to EN558 series 20 EVBS - Semi-Lugged wafer EN558 series 20 EVUS - DN600-DN U-Section wafer to EN558 series 20 EVML - DN80-DN800 - Single flange wafer to EN558 series 16 EVFL - DN50-DN Double flange EN558 series 14 Series Butterfly valve with - Double eccentric - Designed to EN593 to EN558 table 2 series 14 - Integral or Stainless steel seat - DN200-DN IP 67, 68 or ISO input gearbox - PN25 in DN Series 18/70 - Combi-cross - with 4 outlets - DN PN 10/16 - With ball valves and DN 100 center outlet Options: - with blind flange on center outlet EVS - DN40-DN Wafer to EN558 series Product program Product programme 13

8 SERVICE CONNECTION VALVES & TAPING SADLLE SERVICE CONNECTION VALVES & TAPING SADLLE Series 03/00 - Service Connection Valve resilient seated - Internal BSP thread - DN25-DN50 - ¾ 2 internal thread Series 03/30 - Service Connection Valve resilient seated - Tensile socket end for PE pipes - DN20-DN50 03/34) Series 11/00 - Angle Service Connection Valve resilient seated - Internal/external thread - DN25-DN50 Series 727/09 - Tapping Saddle under pressure drilling - With integrated cutter - With integrated service connection valve - For PE/PVC pipes - Dd 75 Dd 225 mm - ½ 2 BSP thread Series 730/02 - Universal Tapping Saddle - For steel and other metal pipes - DN50 DN300 - ½ 2 BSP thread - Upper part from DN80- DN200 and available from DN80-DN300 for saddle DN200 and above Series 730/03 - Universal Tapping Saddle with Shut-Off - Under pressure tapping - For ductile iron, steel and other metal pipes - DN50 DN300 - ½ 2 BSP thread - Upper part from DN80- DN200 and available from DN80-DN300 for saddle DN200 and above Series 11/30 - Angle Service Connection Valve resilient seated - Tensile socket/external thread - DN25-DN50 Series 16/00 - Brass Service Connection Valve resilient seated T-Top - Tensile screw couplings for PE pipes - DN25-DN50 Series 16/05 - Brass Service Connection Valve resilient seated - Tensile screw couplings for PE pipes - DN25-DN50 PN16 Series 729/0X - Repair Clamp - Single, double or triple band mm - Stainless steel AISI Clamp width mm - BSP thread - Available with stainless steel AISI Available with T-flange branch Series Repair Clamp - Internal or external mm - Stainless steel AISI Clamp width mm - Available with stainless steel AISI 316 Series 10/00 - Tapping Saddle - For PVC and PE pipes - DN50 DN300 - BSP ¾ 2 - Lower part in stainless steel from DN250 and above Series 10/10 - Universal Tapping Saddle - For ductile iron pipes - DN/DN 37/42 DN/DN 310/336 - M40 X 3 or M55 X 4 threads Series 257/30 - Universal Under Pressure Tee - For ferrous pipes - DN80 DN300 flanged branch - Different branch flange drilling available - DN/DN 85.4/114 DN/ DN 319.9/ Product program Product programme 15

9 PRODUCTS RANGE FOR WASTEWATER TREATMENT PRODUCTS RANGE FOR WASTEWATER TREATMENT Series 01/74 seated with Supa coupling for u PVC and PE pipes - DN40-DN300 Series 01/84 seated with socket ends for PVC pipes - DN40-DN400 Series 02/21 3 Series 40 GS - Swing Check Valve resilient seated with - Short body 3 EN558 table 2 series 10 - Available with and without lever and weight Series 41/36 GS - Swing Check Valve metal 3 EN558 table 2 series 48 - DN350-DN600 lever and weight Series 41/60 GS - Swing Check Valve resilient seated with - Long body Available with and without lever and weight Series 02/ DN40-DN500 Series 06/ DN40-DN600 Series 15/43 seated for actuator with 14 - DN40-DN400 Series 641/02 - Swing Check Valve metal - Designed to AWWA C EN558 table 2 series 10 - DN700-DN Available with and without lever and weight Series 641/12 - Recoil Check single door with - Designed to manufacturer standard - DN100-DN500 EN Available with PN25 Series Recoil Check multi door with - Designed to manufacturer standard - DN600-DN Available with PN25 Series 15/73 seated for actuator with 15 - DN40-DN500 Series 54 - Gate Valve metal seated with. 3 - DN700-DN Available with and without by-pass Series 21/30 GS. Stem seals exchangeable under pressure EN558 table 2 series 3 Series 55/ DN450-DN600 & Available with and without by-pass Series 21/60 GS 3 - PN25 Series 41/00 - Swing Check Valve resilient seated with - Designed to AWWA C508 to ASME B psi ANSI B16.42 Class 150 FF - Available with and without lever and weight Series 53 - Ball Check Valve - Designed to EN DIN 3202-F6 - DN50-DN600 (Flanged) - DN32-DN50 (BSP) - PN10 EN Available with stainless steel 316 body and bonnet (series 53/40) DN32-DN80 Series 779 (EX) Wafer Knife Gate Valve - Uni-directional - DN50-DN1200 (larger diameter on request - Working pressure up to PN10 - Standard Flange drilling to (EN1092-2) PN10 and ANSI B16.5 (Class 150) - Pressure class based on size - PN10 (DN50-250) - PN6 (DN ) - PN5 (DN450) - PN4 (DN ) - PN2 (DN ) EN1092- flange drilling connection types actuation options Series 779 (ET) Full-lug Knife Gate Valve - Uni-directional - DN50-DN900 (larger diameter on request) - Working pressure up to PN10 - Standard Flange drilling to (EN1092-2) PN10 and ANSI B16.5 (Class 150) flange drilling connection types actuation options 16 Product program Product program 17

10 PRODUCTS RANGE FOR WASTEWATER TREATMENT PRODUCTS RANGE FOR WASTEWATER TREATMENT Series 779(EB) - Semi-lug Knife Gate Valve - Bi-directional - DN50-DN1200 (larger diameter on request) - Working pressure up to PN10 - Standard Flange drilling to (EN1092-2) PN10 EN558-1 series 20 flange drilling connection types actuation options steel AISI 304 or AISI 316 body material - Available with rising stem model Series 779)HB) - Semi-lug Knife Gate Valve (High Pressure) - Bi-directional (larger diameter on request) - Working pressure PN16 - Standard Flange drilling to (EN1092-2) PN16 EN558-1 series 20 flange drilling connection types actuation options Series 75 -Butterfly Valve with fully vulcanized rubber line -Designed to EN 593 -Available with different flange drilling -Available with different component materials grades -Available with different manual and motorized actuation EVFS - DN40-DN /25 - Double flange EN 558 series 13 EVFL - DN50-DN Double flange to EN558 series 14 EVS - DN40-DN Wafer to EN558 series 20 Series 861/42 - Air Valve 3 functions - Anti-surge (RFP) 4 & AWWA C DN50-DN200 flange drilling Series 861/50 - Combination Air Valve 4-2 Inlet Series 861/41 - Air Valve 3 functions - Anti-water hammer (AS) 4 & AWWA C DN50-DN200 flange drilling EVBS - DN80-DN800 - Single flange wafer to EN558 series 16 EVML Supa Maxi universal tensile step coupling DN PN 10/16 Ductile iron EVTLS - DN50-DN Full-Lugged wafer EN558 series 20 Series 701/57 - Combination Air Valve - Double acting with Anti- Surge feature 4 - DN50-DN200 - PN10 - Full body made of stainless steel AISI Flange with screwed studs for alignment to ANSI B16.1 Class 125 or EN PN10 - Available with PN16 and PN25 - Available with 2 BSP thread Series 772/61 - Wall Penstock - Rising or Non-rising stem configuration - Designed to DIN (available with AWWA C561 and BS7775 standards) - Sizes up to X (mm) - Bigger sizes available on request - Available in Bi-directional and unidirectional - Four sides sealing - Lower leakage rate than max. allowable in design standard - Stainless Steel Frame and Slide 304 or 316 actuation options Series 772/71 - Channel Penstock - Rising or Non-rising stem configuration - Designed to DIN (available with AWWA C561 and BS7775 standards) - Sizes up to X (mm) - Bigger sizes available on request - Available in Bi-directional and uni-directional - Three sides sealing - Lower leakage rate than max. allowable in design standard - Stainless Steel Frame and Slide 304 or 316 actuation options Options: for gas PN 10 EVUS - DN600-DN U-Section wafer to EN558 series Product program Product program 19

11 PRODUCTS RANGE FOR FIRE PROTECTION PRODUCTS RANGE FOR FIRE PROTECTION Series 24/10 - Fire Hydrant Wet Barrel with monitor flange - Designed to AWWA C503 - UL listed, FM approved - 6 Inlet - RWP 200 psi - All internals and nozzles are made of Bronze - 2 x 2 ½ NST hose nozzle - 1 x 4 /4 ½ NST, 4 BS336 or 5 Storz pumper nozzle - Available with 2 ½ instantaneous coupling to BS336 - Available with 2 ½ globe valve with instantaneous coupling to BS336 Series 24/96 - Fire Hydrant Wet Barrel - Designed to AWWA C503 - UL listed, FM approved - 6 Inlet - RWP 200 psi - All internals and nozzles are made of Bronze - 2 x 2 ½ NST hose nozzle - 1 x 4 /4 ½ NST, 4 BS336 or 5 Storz pumper nozzle - Available with 2 ½ instantaneous coupling to BS336 - Available with 2 ½ globe valve with instantaneous coupling to BS336 Series 29/388 - Underground Fire Hydrant - Designed to EN14339:2005/BS750: WRAS approved - DN80 inlet flange universal drilled to EN PN10/16 & BS10 table D/E - 2 ½ London round thread outlet to BS Available with PN25 version outlets - Stainless steel or Gunmetal to BS 750 round thread - Instantaneous (Morris) - Belfast - London V thread - Internal screwed - Bayonet Series 34/00 - Post Indicator - Designed to UL789 & FM UL listed (DN ) - FM approved (DN ) - Telescopic post indicator available win 3 basic lengths - Lower barrel available of cast steel bitumen coated and optionally of PVC Series 27/00 - Fire Hydrant Dry Barrel - Designed to AWWA C502 - UL listed, FM approved - 4, 6 & 8 Inlet - Duckfoot or straight shoe inlet types - High pressure rated 250 psi Adjustable - Breakable traffic system - Bronze outlets - 2 x 2 ½ NST hose nozzle - 1 x 4 /4 ½ NST, 4 BS336 or 5 Storz pumper nozzle - Drain outlets at the base bury depths stem materials - Available with 2 ½ instantaneous coupling to BS336 - Available with 2 ½ globe valve with instantaneous coupling to BS336 Series 24/8X - Breakable flange kit for wet barrel fire hydrant ANSI B16.42 Class 150 FF Series 27/ Traffic repair Kit for dry barrel fire hydrants Series 24/8X Traffic repair Kit for wet barrel fire hydrants * Series 24/88 - Breakable ball check valve for wet barrel fire hydrant - RWP 250 psi - Ductile iron ball fully encapsulated with EPDM rubber ANSI B16.42 Class 150 FF Series 120/55 - Fire Hydrant Dry Barrel Designed to EN and 6 duckfoot inlet with loose flange for easy installation Adjustable - Breakable traffic system - Anodized Aluminum outlets - 2 x 2 ½ NST hose nozzle - 1 x 4 /4 ½ NST pumper nozzle - Drain outlet at the base bury depths - Available with 2 ½ instantaneous coupling to BS336 - Available with 2 ½ globe valve with instantaneous coupling to BS336 * Contact AVK SVMC for more details Series 34/80 -Wall Post Indicator -Designed to UL789 & FM1110 -UL listed (DN ) -FM approved (DN ) To suit DN50- DN400 post indicator gate valve -Available with stem lengths 250, 750 & 1250mm -Prepared for supervisory switch Series 45/5D seated for Post Indicator with - Designed to AWWA C509 - UL listed, FM approved -Face to face according to ASME B RWP 250 psi - DN350 & 400 UL/FM approved to 200psi ANSI B16.42 Class 150 FF - Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem Series 45/51 seated with - Designed to AWWA C509 - UL listed, FM approved ASME B RWP 250 psi -DN350 & 400 UL/FM approved to 200psi ANSI B16.42 Class 150 FF -Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem Series 45/5C-M -Gate Valve resilient seated OS&Y with flanged ends -Prepared for actuator -Designed to AWWA C509 -Face to face according to ASME B DN50-DN400 -RWP 250zpsi -Flange drilling to ANSI B16.42 Class 150 FF -Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem Series 45/5C seated OS&Y with - Designed to AWWA C509 - UL listed, FM approved ASME B RWP 250 psi - DN350 & 400 UL/FM approved to 200psi ANSI B16.42 Class 150 FF - Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem Series 45/5K -Gate Valve resilient seated with -Prepared for actuator -Designed to AWWA C509 -Face to face according to ASME B DN50-DN400 -RWP 250 psi -Flange drilling to ANSI B16.42 Class 150 FF -Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem 20 Product program Product program 21

12 PRODUCTS RANGE FOR FIRE PROTECTION ACTUATORS Series 55/51 Gate Valve resilient seated for actuator with flanged ends Designed to AWWA C515 Face to face according to ASME B16.10 DN450-DN600 RWP 250 psi Flange drilling to ANSI B16.42 Class 150 FF Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem Series 55/56 seated OS&Y with - Designed to AWWA C515 ASME B DN450-DN600 - RWP 250 psi Flange drilling to ANSI B16.42 Class 150 FF - Available with Aluminum Bronze, Stainless steel AISI 304 or AISI 316 stem lever and weight Series 27/70 - Extension kit for dry barrel fire hydrants lengths Series 08/00 - Handwheel for Gate Valves Series 75 Lever Series 75 lever -Lever for butterfly valves series 75 Manual Gearbox - Quarter turn gearbox for butterfly valves - Multi turn gearbox for gate valves Series 27/ Tool kit for dry barrel and wet barrel fire hydrants Electrical Actuator - Electrical actuator for gate valves and butterfly valves for on/off or modulating duty Pneumatic Actuator- - - Pneumatic actuator for gate valves and butterfly valves 22 Product program Product program 23

13 FLANGE ADAPTORS, COUPLINGS & DISMANTLING JOINTS FLANGE ADAPTORS, COUPLINGS & DISMANTLING JOINTS Series Combi-Flange Adaptor - Designed to EN545 for ductile iron pipes - Designed to EN12842 for PE and PVC pipes -For PE, PVC and Ductile iron pipes - Available in Tensile or nontensile sealing ring - DN50-DN600 (nontensile) (tensile)- - PN10/16 EN Series 05/E - Support Bush - For insertion in PE pipes - For SDR 11 and SDR 17 PE pipes and for Bi-PVC pipes - DN20-DN400 Series 260/30 - Fabricated Flange Adaptor - For all ferrous, GRP*, upvc and AC pipes - DN350 -DN PN10/16/25 -Flange drilling to EN or ANSI B16.5 Series Supa Universal Step Coupling - For all ferrous, PVC and AC pipes - DN40-DN400 - ±4 angular deflection - Available with stainless steel AISI 316 bolts and nuts Series 621/41 - Supa Plus Tensile Straight Coupling - For PE and upvc pipes - DN40-DN300 - ±3.5 angular deflection Series 631/00 - Supa Maxi Straight Coupling - Universal and tensile - For all pipes types - Designed to EN ±4 angular deflection Series 603/A - Universal Supa Flange Adaptor - For cast iron, ductile iron, steel, upvc and asbestos cement pipes - ±4 angular deflection - DN40-DN400 EN or ANSI B Mild steel Sheraplex bolts/nuts - Available with stainless steel AISI 316 bolts and nuts Series 623/10 - Supa Plus Flange Adaptor - For PE and PVC pipes - Designed to EN Tensile sealing ring - ±3.5 angular deflection - DN40-DN250 EN Series 633/00 - Supa Maxi Flange Adaptor - Universal and tensile - For all pipes types - Designed to EN ±4 angular deflection - DN40-DN400 EN Series 632/00 -Supa Maxi Step Coupling -Universal and tensile -For all pipes types -Designed to EN ±4 angular deflection -DN50-DN300 -PN10/16 Series 635/00 - Supa Maxi Transition Coupling - Universal and tensile - For all pipes types - Designed to EN ±4 angular deflection - DN50-DN315 for SDR 11 - PN10 for SDR 17 Series 265 -Dismantling Joint -±30, ±40 or ±60 standard axial adjustment depend on product size -Tie rods of zinc plated and passivated steel -DN50-DN2200 -PN10/16 -Available in PN25 (DN300 and above) -Flange drilling to EN Available with stainless steel A2 or A4 tie rods Series Fabricated Straight Coupling - For all ferrous, GRP* and PVC pipes - DN350-DN1200+ /25 Series Fabricated Straight Coupling - For all ferrous, GRP* and PVC pipes - DN350-DN1200+ Series Supa Universal Straight Coupling - For all ferrous, PVC and AC pipes - DN40-DN400 - ±4 angular deflection PN10/16 - Available with stainless steel AISI 316 bolts and nuts 24 Product program Product program 25

14 FITTINGS & ACCESSORIES Series 04 - Extension Spindle - For gate valves and service connection valves - Fixed or telescopic length - Different options for extension spindle rod material Series 04/15 - T-Key for operation of underground valves Series 04/22 - Stem Cap - For protection of valves and extension spindle stem - DN25 - DN600 Series 04/10 - Street Cover - Different lid inscriptions in Arabic and English - 190mm height Series 04/31 - Street Cover - Water Inscription in English and Arabic - 300mm height Series 08/32 - Synthetic Surface Box - Height adjustable with reinforced rim and spring - Different lid inscriptions in Arabic and English - Heat resistance to max. 250 C to 430mm height adjustable - Available with spring or lockable versions Series 80/50 -Water Meter Box -RAL Polypropylene MOEWA or NWC branded - Dust and weather proof -High temperature and impact resistance -UV resistant - Various mounting orientations * Contact AVK SVMC for more details Series 634 -Supa Maxi End Cap -Universal and tensile -For all pipes types -Designed to EN ±4 angular deflection -DN50-DN400 -PN16 Series Flange Fittings - Designed to EN545 EN Flange bends in 11 ¼, 22 ½, 30, 45 and 90 Tee flange Reducers Blind flange Duckfoot flange 26 Product program

15 Copyright AVK SVMC Jeddah Tel.: Fax: P.O.Box Jeddah Kingdom of Saudi Arabia Riyadh Tel.: Fax: P.O.Box Riyadh Kingdom of Saudi Arabia Dammam Tel.: Fax: P.O. Box 2780 Khobar Kingdom of Saudi Arabia