VECTOR. for a monolithic effect with minimal visible grid Mineral - Metal - Wood CEILING SYSTEMS

Transcription

1 CI/SfB (35) Xy 08/2009 CEILING SYSTEMS Between us, ideas become reality VECTOR for a monolithic effect with minimal visible grid Mineral - Metal - Wood

2 Design Vector is your solution: it offers the perfect balance between aesthetical and technical requirements. AXAL Vector & AXIOM Classic Canopy Choose the finish that will suit your design requirements from the following selection of materials: the smooth textures of ULTIMA, OPTIMA and now DUNE (mineral ceilings), AXAL (metal ceilings) and the warm finish of MADERA (wood ceilings). Edge detail ULTIMA Vector and DUNE Vector example 24 mm exposed grid 24 mm exposed grid A B 43 C D Monolithic ceiling with access to the plenum Integrate services within reduced plenum heights Improve room aesthetics & acoustics using the existing suspension system. With the tiles virtually concealing the grid and downwardly demountable, the Vector edge detail enables you to create a monolithic ceiling while guaranteeing full access to the plenum. 6

3 Acoustic However demanding your acoustic requirement may be, there is a tile in the Vector range that will meet it! ULTIMA Vector You will find the appropriate acoustical treatment to achieve your goal, should it be to be heard properly in a room or not to be overheard or disturbed. OPTIMA for call centres & open spaces, ULTIMA & DUNE for partitioned offices and meeting rooms, MADERA for hotel lobbies and lounges or AXAL for any of the above, including circulation spaces. DUNE ULTIMA / OPTIMA AXAL MADERA

4 Safe & healthy Armstrong cares for the environnement, from R&D to on site installation. ULTIMA Vector Armstrong is committed to producing ceilings with a high recycled content. Vector products contain up to 70% of recycled content. Up to 90% light reflectance guaranteeing visual comfort & energy savings. Up to 95% humidity resistance allowing the product to be cleaned/washed. AXAL Vector is available with a Bioguard anti-microbial active treatment. All our products are tested to meet the appropriate fire reaction regulations.

5 Ease of use Installation Install & remove from below with no special tool Refurbishment: Can be installed on existing 24mm exposed tee grid Better durability for frequent handling Install where plenum height is limited (minimum height 60 mm, from face of tile to nearest obstruction) 1 Push the panel up against the grid flanges and find the one direction it will move. AXAL Vector installed on Prelude 24 XL² 2 Slide the panel until it contacts the adjacent panel. 3 Lower the opposite edge out of the grid opening and slide the panel off the flange. 4 Remove the panel.

6 Tiles performances VECTOR RANGE Vector ceiling panels have a double cut kerf on one side (spring kerf for Axal) and a single cut kerf on the opposite side. The other two sides have non-engaging edges. This revolutionary patented edge design results in a narrow 6 mm reveal that minimises the existing grid and gives the ceiling an upscale, monolithic look. MINERAL WOOD METAL Dimensions w NRC Dnfw Light reflectance ULTIMA Vector 600 x (H) % 95% A2-s1, d % OPTIMA Vector 600 x % 95% A2-s1, d % 600 x 1200 DUNE Vector 600 x % 95% A2-s1, d % MADERA Vector 600 x 600 up to 0.50 (L) up to 75% 70% B-s2, d % RH Fire reaction 500 x 500 AXAL Vector 600 x 600 up to up to 44 up to 90% 95% A1* % 750 x 750 kg/m 2 Recycled content 08/2009- EPCOM agency - Nick Bourgeois - Armstrong US - Printed on chlorine free paper. All dimensions are in mm. * Depending on the perforation and acoustical correction, please contact our Internal Technical Sales team for more information. United Kingdom Republic of Ireland Armstrong World Industries Ltd. Building Products Division Armstrong House 38 Market Square Uxbridge UB8 1NG (UK) FREEFONE (ROI) Fax: +44 (0) sales-support@armstrong.com MADERA Vector