PRODUCT GUIDE T HERMOFOIL THERMOFOIL

Transcription

1 PRODUCT GUIDE T HERMOFOIL THERMOFOIL

2 Applications Product Benefits CSR Bradford THERMOFOIL Vapour and mechanical barrier for wrapping timber frames with brick veneer cladding. Breathable moisture and mechanical barrier for wrapping timber frames with timber or fibre cement cladding. Sarking under roof tiles where joist spacing is less than 600mm. Sarking under roof tiles where joist spacing is greater than 600mm and less or equal to 900mm. Sarking under roof tiles where joist spacing is less than 900mm. For use in cyclone and hail affected areas. Metal Roof where joist spacing less than 900mm Metal roof where joist spacing greater than 900mm Facings for blankets and boards. THERMOFOIL 732 THERMOFOIL 734 THERMOTUFF LD Timber Cladding Membrane THERMOFOIL 799 THERMOTUFF LD Breather THERMOFOIL 733 THERMOTUFF MD THERMOFOIL HD THERMOPLAST 983 THERMOTUFF XHD THERMOTUFF SS THERMOFOIL 732 THERMOTUFF LD THERMOFOIL 733 THERMOTUFF MD THERMOFOIL 729 THERMOFOIL 730 THERMOFOIL 750 THERMOPLAST 980 An economical antiglare light duty wall wrap. A stronger wall wrap with greater edge tear resistance. A high performance wall wrap which is easy to handle due to it s lightness and which has superior strength and exposure resistance. A fire resistant non reinforced building paper. A light duty micro perforated foil laminate. A high performance micro perforated wall wrap with superior strength and exposure resistance. An economical medium duty sarking for use where design wind speeds do not exceed 41m/s. A high performance medium duty sarking with greater edge tear resistance and improved handling. A traditional heavy duty sarking with reduced wind flap. A decorative white polymeric sarking for use in exposed situations. A high performance extra heavy duty sarking suitable for use unsupported in spans from 600mm to 900mm. The ultimate sarking material suitable for use unsupported and without safety mesh in spans up to 900mm. It has been tested as resistant to hail up to 50mm in diameter. An economical light duty reflective insulation and condensation barrier. A premium light duty reflective insulation tough and light for ease of handling. An economical medium duty reflective insulation and condensation barrier. A premium medium reflective insulation tough and light for ease of handling. An economical light duty facing for roofing blanket. A tougher medium duty facing for blanket used in roofing, cladding and duct wrap applications. A heavy duty facing with superior mechanical resistance.a perforated version is available for acoustic applications. A polymeric surface for where a cleanable, corrosive resistant surface or decorative finish is required. Available in white.also available in a perforated version for acoustic applications. 2

3 Product Description Antiglare Area Weight Length Width g/m 2 m mm THERMOFOIL 732 Reflective glassfibre reinforced Yes /30/ THERMOFOIL 734 Reflective glassfibre reinforced Yes / THERMOTUFF LD Woven polymeric reinforcement Yes / /1500 laminated to aluminium foil Timber Cladding Membrane Breathable fire resistant Yes / building paper THERMOFOIL 799 Microperforated 734 Yes / THERMOTUFF LD Breather Microperforated Thermotuff LD Yes THERMOFOIL 733 Reflective glassfibre reinforced Yes / / /60 THERMOTUFF MD Woven polymeric reinforcement Yes /30/ /1500 laminated to aluminium foil THERMOPLAST 983 A decorative white polymeric Yes faced, glassfibre reinforced, foil double paper laminate THERMOFOIL 753 Reflective glassfibre reinforced Yes /30/ /1350 THERMOTUFF XHD Woven polymeric reinforcement Yes laminated to aluminium foil THERMOTUFF SS Woven polymeric reinforcement Yes / laminated to aluminium foil 3

4 Product Description Antiglare Area Weight Length Width g/m 2 m mm THERMOFOIL 729 Reflective glassfibre reinforced No / THERMOFOIL 731 Reflective glassfibre reinforced No / THERMOFOIL 730 Reflective glassfibre reinforced No / /1350 THERMOFOIL 750 Reflective glassfibre reinforced No / /1350 THERMOPLAST 980 A decorative white polymeric No faced, glassfibre reinforced, foil single paper laminate THERMOFOIL 730 Perf Reflective glassfibre reinforced No /1350 perforated with 10% open area for acoustic applications THERMOFOIL 750 Perf Reflective glassfibre reinforced No /1350/1500 perforated with 10% open area for acoustic applications THERMOPLAST 980 Perf A decorative white polymeric No faced, glassfibre reinforced foil paper laminate perforated with 10% open area for acoustic applications 4

5 Product Classifications in accordance with AS/NZ Physical Properties Duty Vapour Emittance Water Tensile Strength (kn/m) Edge Tear Resistance (N) Barrier Barrier Machine Lateral Machine Lateral THERMOFOIL 732 Light High Reflective High THERMOFOIL 734 Light High Reflective High THERMOTUFF LD Light Medium Reflective High Timber Cladding Membrane n/a n/a n/a n/a THERMOFOIL 799 Light Low Reflective Unclassified THERMOTUFF LD Breather Light Low Reflective Unclassified THERMOFOIL 733 Medium High Reflective High THERMOTUFF MD Medium Medium Reflective High THERMOPLAST 983 Medium High 0.31 High THERMOFOIL 753 Heavy High Reflective High THERMOTUFF XHD Extra Medium Reflective High Heavy THERMOTUFF SS Extra High Reflective High Heavy THERMOFOIL 729 Light High D/S Reflective High THERMOFOIL 731 Light High D/S Reflective High THERMOFOIL 730 Medium High D/S Reflective High THERMOFOIL 750 Heavy High D/S Reflective High THERMOPLAST 980 Light High Reflective High THERMOFOIL 730 Perf Unclassified Low D/S Reflective Unclassified THERMOFOIL 750 Perf Unclassified Low D/S Reflective Unclassified THERMOPLAST 980 Perf Unclassified Low Reflective Unclassified 5

6 Product Fire Performance Indices in accordance with AS1530 : Part 3 Flammability Ignitability Spread of Heat Smoke Index Flame Evolved Developed THERMOFOIL 732 <5 THERMOFOIL 734 <5 THERMOTUFF LD <5 Timber Cladding Membrane <5 THERMOFOIL 799 <5 THERMOTUFF LD Breather <5 THERMOFOIL 733 <5 THERMOTUFF MD <5 THERMOPLAST 983 <5 THERMOFOIL 753 <5 THERMOTUFF XHD <5 THERMOTUFF SS < THERMOFOIL 729 < THERMOFOIL 731 < THERMOFOIL 730 < THERMOFOIL 750 < THERMOPLAST 980 < THERMOFOIL 730 Perf < THERMOFOIL 750 Perf < THERMOPLAST 980 Perf <

7 CSR Bradford Foil Product Characteristics Product Emissivity of Reflectivity of Resistance Resistance Shrinkage Foil Surfaces Foil Surfaces of Dry of Wet (ASTM-C455) Lamination Delamination THERMOFOIL Range Pass Pass <0.5% THERMOFTUFF Range Pass Pass <0.5% THERMOPLAST Range Pass Pass <0.5% Impact Resistance Bradford THERMOFOIL Safety Sarking is deemed impact resistant in accordance with UL2218 : Impact Resistance of Roof Covering Materials, and has proven resistance to hailstone perforation when installed to AS Durability CSR Bradford Thermofoil is guaranteed to perform to specifications in normal building applications when installed in accordance with AS/NZS : Pliable Building Membranes and Underlays, Part 2 Installation Requirements. NOTES: For further details on product sizes, packaging or stock availability, or for technical information about other CSR Bradford Insulation products, please refer to the CSR Bradford Insulation office in your region. CSR Bradford Insulation has a policy of continuous product development, therefore new product information will be distributed for inclusion in the CSR Bradford Insulation Technical Manual as and when available. 7

8 Bradford Insulation CSR Building Solutions Website. Manufacturing Facilities. CSR Bradford Insulation is a leading insulation manufacturer in Australia and Asia with manufacturing facilities located throughout the region. AUSTRALIA. Glasswool factory, Ingleburn NSW. Rockwool factory, Clayton VIC. Thermofoil factory, Dandenong VIC. ASIA. Glasswool factory, Zhuhai, China. Rockwool factory, Dongguan, China. Rockwool factory, Rayong,Thailand. Rockwool factory, Kuala Lumpur, Malaysia. Flexible Duct factory, Singapore. AUSTRALIA. State Phone Fax Head Office NSW (02) (02) ACT (02) (02) VIC (03) (03) TAS (03) (03) QLD (07) (07) SA (08) (08) NT (08) (08) WA (08) (08) Sales Offices. INTERNATIONAL. Country Phone Fax New Zealand Hong Kong China (Glasswool) China (Rockwool) Thailand Malaysia Singapore Health and Safety Information. Information on any known health risks of our products and how to handle them safely is displayed on the packaging and/or the documentation accompanying them.additional information is listed in product Material Safety Data Sheets available from your regional CSR Bradford Insulation office or visit our website. Warranty. CSR Limited warrants its Bradford Insulation products to be free of defects in materials and manufacture. If a CSR Bradford Insulation product does not meet our standard, we will, at our option, replace or repair it, supply an equivalent product, or pay for doing one of these.this warranty excludes all other warranties and liability for damage in connection with defects in our products, other than those compulsorily imposed by legislation. CSR Bradford Insulation is a business of CSR Limited A.B.N CSR Limited is the owner of the following trade marks.acousticlad,acousticon,acoustilag,anticon, Bradfix, Bradford, Comfort Plus, Ductel, Fibermesh, Fibertex, Fireseal, Flexitel, Flex-skin, Gold Batts, Multitel, Quietel, SoundScreen, Spanseal, Specitel, Supertel,Thermaclad,Thermatel, Thermodeck,Thermofoil,Thermokraft,Thermoplast,Thermotuff, Ultratel. BI003.BMS THERMOFOIL