building movement solutions MECHANICAL, SEAL AND METAL EXPANSION JOINTS car park solutions VEXCOLT

Size: px

Start display at page:

Download "building movement solutions MECHANICAL, SEAL AND METAL EXPANSION JOINTS car park solutions VEXCOLT"

Prosper Collins
5 years ago
Views:

1 building movement solutions MECHANICAL, SEAL AND METAL EXPANSION JOINTS car park solutions VEXCOLT

2 contents of car park solutions Product Page No. Introduction Access 3 Traffic Load & Contact Area 4 Traffic Frequency 5 Fire Barriers 6 Waterproofing 7 Mechanical Expansion Joints Transatec 1100 : A Transatec 1100 : S01 (stainless steel) Transatec 1130 : A01-A Transatec 1130 : S01-S02 (stainless steel) Transatec 1140 : A Transatec 1150 : A High Load Expansion Joint Transatec 1170/1175 : S01 (stainless steel) Seal Expansion Joints Flexatec 1200 : A Flexatec 1210 : A Flexatec 1220 : A Fire Barriers Fire Barriers Introduction 29 Fireflex 2000 : A01-A Fireflex 2100 : A01-A Fireflex 2200 : A01-A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

introduction to car park solutions Access With over 25 years experience, Vexcolt is a leading manufacturer and supplier of expansion joints, control joints and fire barrier systems worldwide.

protection challenges with elegant and economic solutions.

We never forget that a parking deck is where you leave your car before continuing on to your destination.

3 introduction to car park solutions Access With over 25 years experience, Vexcolt is a leading manufacturer and supplier of expansion joints, control joints and fire barrier systems worldwide. With operations in the United Kingdom, USA, Middle East, India and China, Vexcolt has the capability and experience to work with architects and contractors on a global basis to meet movement and fire protection challenges with elegant and economic solutions. Our comprenensive range of expansion joints is used in large, cutting-edge projects around the world and our collection of products specifically designed for parking decks is extensive. We never forget that a parking deck is where you leave your car before continuing on to your destination. Accessibility for all pedestrians is vital, and as a result, our parking deck products are pedestrian friendly and meet the requirements of ALL international disability regulations, including ADA (Americans with Disabilities Act) legislation, throughout their entire movement cycle. Vexcolt works closely with designers and engineers to ensure that profiles specified meet the specific needs of each project, and that they comply with international standards for vehicle loading (as defined by Eurocode 1 EN ) and fire protection (under the requirements of both UL2079 and BS 476). Our car park systems have been carefully developed to provide safe, efficient and long-term methods of sealing car park deck expansion gaps. We never forget that a parking deck is where you leave your car before continuing on to your destination. Accessibility for all is key. 3

introduction to car park solutions Traffic Load & Contact Area Applied load and load contact

self-weight, imposed loads for buildings defines the vehicle loading of parking structures as

4 introduction to car park solutions Traffic Load & Contact Area Applied load and load contact area are critical elements to be considered when selecting an expansion joint for car park decks. Eurocode 1 EN Actions on Structures - Part 1-1: General actions Densities, self-weight, imposed loads for buildings defines the vehicle loading of parking structures as being from light vehicles of 30kN ( 3.0 tonnes) and 8 seats (excluding the driver). The maximum axle load is 20kN ( 2.0 tonnes) and this is applied through two tyres each with a contact area of 100mm x 100mm. All of Vexcolt s car parking expansion joint systems meet or exceed these requirements. 4 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

Traffic Frequency has been broken down into 8 groups: TF1 TF2 TF3 TF4 TF5 TF6 TF7 TF8 10 transits per day 100 transits per day 1,000 transits per

5 introduction to car park solutions Traffic Frequency Traffic Frequency relates to the maximum number of passes that a load makes across the expansion joint system per day. Traffic Frequency has been broken down into 8 groups: TF1 TF2 TF3 TF4 TF5 TF6 TF7 TF8 10 transits per day 100 transits per day 1,000 transits per day 2,500 transits per day 5,000 transits per day 10,000 transits per day 25,000 transits per day > 25,000 transits per day The number of times a load travels across a jointing system can have significant impact upon the life expectancy of the product. 5

introduction to car park solutions Fire Barriers It is vitally important that building designers consider placing fire barriers beneath expansion joints where that jointing system breaches fire

The fire s proximity to highly flamable substances combined with limited ventilation and escape routes could potentially pose a significant threat to life.

6 introduction to car park solutions Fire Barriers It is vitally important that building designers consider placing fire barriers beneath expansion joints where that jointing system breaches fire compartment floors, walls and ceilings. A fire in an enclosed or underground car park is a major hazard. The fire s proximity to highly flamable substances combined with limited ventilation and escape routes could potentially pose a significant threat to life. It is vital therefore that there is sufficient protection against the spread of fire in these areas. It should be remembered that expansion joints are physical breaks in the continuity of construction and, as such, pass through floor, walls and ceilings. In the event of fire these expansion gaps act as a chimney allowing passage of toxic smoke and fire throughout the building. Where expansion joints pass through compartment floors, walls and ceilings it is important that a suitable fire barrier is installed within the expansion gap. These fire barriers must be able to accommodate the movement that the structure is expected to exhibit while at the same time maintaining the fire integrity of the compartment. Fire barriers are rated in the number of minutes fire proofing integrity that they offer and are grouped into two separate ratings: FB2 FB4 120 minutes fire integrity minimum 240 minutes fire integrity minimum Fire Test Certification Fire barriers are tested and rated to UL 2079 and BS 476. Further details are available in the relevant Technical Datasheets shown later in this brochure. Full details and copies of Vexcolt s UL Certification may be found in the Online Certifications Directory at 6 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

introduction to car park solutions Waterproofing Some ranges of joints contained in this handbook already incorporate waterproofing features; however other expansion joints such as mechanical systems

7 introduction to car park solutions Waterproofing Some ranges of joints contained in this handbook already incorporate waterproofing features; however other expansion joints such as mechanical systems will require a secondary waterproofing membrane to ensure the watertight integrity of the expansion gap. Secondary waterproofing generally should comprise a Firestone 1.15mm thick EPDM membrane epoxy bonded to the substrate either side of the expansion gap. Alternatively a self-adhesive or torch-applied sheet membrane (by others) may be used. It is important to use a membrane that can be bonded and cross linked to the structural waterproofing as this will provide a fully watertight solution. The membrane should be draped into the expansion gap such that it provides sufficient slack to move in response to structural deflection and provision should be made for the drainage of this membrane at the design stage. The membrane should be laid on top of any levelling bed being used and span all gaps and extend at least 100mm beyond gap arrises. It should be carried up all upstands and risers and intersections should be formed carefully and tested to ensure watertightness before expansion joints are installed. It is essential to waterproof some joints, particularly those that are used in the external envelope of a structure where driven rain and pooling of water are likely. 7

8 MECHANICAL EXPANSION JOINT Floor to Floor mm ( 1-3 ) Expansion Gaps Transatec 1100 : A01 Expansion Joint Selection Criteria Load Rating Product Details Transatec 1100 : A01 Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) /-8 [24] A (H1) Floor - Floor /-15 [40] 5 kn 31 kn 30 kn - 25: A (H1) /-25 [60] A (H1) When specifying or ordering please add the height (H1) required to the Product Reference. For example Transatec 1100 : A denotes a joint 25mm high : A01 and A02 joints have aluminium cappings as standard. Membrane epoxy bonded to the substrate Membrane epoxy bonded to the joint frame Membrane looped into the expansion gap to allow movement Fully waterproof Membranes overlapped and fully bonded together 8 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor 25-75 mm ( 1-3 ) Expansion Gaps Features Surface Americans with Disabilities Act (ADA) compliant across the entire movement cycle Ribbed surface to

9 VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor mm ( 1-3 ) Expansion Gaps Features Surface Americans with Disabilities Act (ADA) compliant across the entire movement cycle Ribbed surface to TPE rubber for improved slip resistance Transatec 1100 : A01 Movement and Load Good movement capacity - maximum +35/-25mm ASTM E-1399 Class I: Thermal Class II: Wind Good load capacity - maximum 31 kn (3.16 tonnes) Traffic Frequency per day > 25, > 25,000 - System Options Gap width(s) 25, 50, 75 mm Height(s) 25, 50 mm Metal type(s): 6063 T5 & T6 aluminium Colour(s) Black (RAL 7021) Fire barrier minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 9

MECHANICAL EXPANSION JOINT Floor to Floor 25-75 mm ( 1-3 ) Expansion Gaps Transatec 1100 : S01 Expansion Joint Selection Criteria Load Rating Product Details Transatec 1100 : S01 Joint Gap Movement

10 MECHANICAL EXPANSION JOINT Floor to Floor mm ( 1-3 ) Expansion Gaps Transatec 1100 : S01 Expansion Joint Selection Criteria Load Rating Product Details Transatec 1100 : S01 Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) /-8 [24] S (H1) Floor - Floor /-15 [40] 5 kn 31 kn 30 kn - 25: S (H1) /-25 [60] S (H1) When specifying or ordering please add the height (H1) required to the Product Reference. For example Transatec 1100 : S denotes a joint 25mm high : S01 and S02 joints have 304-grade stainless steel cappings as standard. Membrane epoxy bonded to the substrate Membrane epoxy bonded to the joint frame Membrane looped into the expansion gap to allow movement Fully waterproof Membranes overlapped and fully bonded together 10 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

11 VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor mm ( 1-3 ) Expansion Gaps Features Surface 80-grit surface finish to stainless steel and ribbed surface to TPE rubber for improved slip resistance Americans with Disabilities Act (ADA) compliant across the entire movement cycle Transatec 1100 : S01 Movement and Load Good movement capacity - maximum +35/-25mm ASTM E-1399 Class I: Thermal Class II: Wind Good load capacity - maximum 31 kn (3.16 tonnes) Traffic Frequency per day > 25, ,000 - System Options Gap width(s) 25, 50, 75 mm Height(s) 25, 50 mm Metal type(s): 6063 T5 & T6 aluminium Standard: 304-grade stainless steel cappings Optional: 316-grade stainless steel cappings Colour(s) Black (RAL 7021) Fire barrier minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 11

12 MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall mm ( 1-5 ) Expansion Gaps Transatec 1130 : A01-A02 Transatec 1130 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number Floor - Floor Deck - Deck B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 25 ± 5 [10] A ± 12 [24] 10 kn 46 kn A kn 75 ± 20 [40] 30 kn A ± 30 [60] A kn 31 kn 125 ± 35 [70] 30 kn A Transatec 1130 : A02 Floor - Wall Deck - Wall Membrane epoxy bonded to the substrate 25 ± 5 [10] A ± 12 [24] 10 kn 46 kn A kn 75 ± 20 [40] 30 kn A ± 30 [60] A kn 31 kn 125 ± 35 [70] 30 kn A Membrane epoxy bonded to the joint frame Membrane looped into the expansion gap to allow movement Fully waterproof Membranes overlapped and fully bonded together 12 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall 25-125 mm ( 1-5 ) Expansion Gaps Features Surface Pedestrian friendly Centre supported and Americans with Disabilities Act (ADA)

13 VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall mm ( 1-5 ) Expansion Gaps Features Surface Pedestrian friendly Centre supported and Americans with Disabilities Act (ADA) compliant across the entire movement cycle Ribbed surface for improved slip resistance Transatec 1130 : A01-A02 Movement and Load Good movement capacity - maximum ± 35mm ASTM E-1399 Class I: Thermal Class II: Wind High load capacity - maximum 120 kn (12.24 tonnes) Traffic Frequency per day > 25,000 1,000 1,000 > 25, System Options Gap width(s) 25, 50, 75, 100, 125 mm Height(s) 50 mm Metal type(s): 6063 T5 & T6 aluminium Colour(s) Black (RAL 7021) Fire barrier minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 13

14 MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall mm ( 1-5 ) Expansion Gaps Transatec 1130 : S01-S02 Transatec 1130 : S01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number Floor - Floor Deck - Deck B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 25 ± 5 [10] S ± 12 [24] 10 kn 46 kn S kn 75 ± 20 [40] 30 kn S ± 30 [60] S kn 31 kn 125 ± 35 [70] 30 kn S Transatec 1130 : S02 Floor - Wall Deck - Wall Membrane epoxy bonded to the substrate 25 ± 5 [10] S ± 12 [24] 10 kn 46 kn S kn 75 ± 20 [40] 30 kn S ± 30 [60] S kn 31 kn 125 ± 35 [70] 30 kn S Membrane epoxy bonded to the joint frame Membrane looped into the expansion gap to allow movement Fully waterproof Membranes overlapped and fully bonded together 14 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

15 VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall mm ( 1-5 ) Expansion Gaps Features Surface 80-grit surface finish to stainless steel and ribbed surface to TPE rubber for improved slip resistance Centre supported and Americans with Disabilities Act (ADA) compliant across the entire movement cycle Transatec 1130 : S01-S02 Movement and Load Good movement capacity - maximum ± 35mm ASTM E-1399 Class I: Thermal Class II: Wind High load capacity - maximum 120 kn (12.24 tonnes) Traffic Frequency per day > 25,000 1,000 1,000 > 25, System Options Gap width(s) 25, 50, 75, 100, 125 mm Height(s) 50 mm Metal type(s): 6063 T5 & T6 aluminium Standard: 304-grade stainless steel cappings Optional: 316-grade stainless steel cappings Colour(s) Black (RAL 7021) Fire barrier minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 15

MECHANICAL EXPANSION JOINT Floor to Floor 150-500 mm ( 6-20 ) Expansion Gaps Transatec 1140 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating

16 MECHANICAL EXPANSION JOINT Floor to Floor mm ( 6-20 ) Expansion Gaps Transatec 1140 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 150 ± 75 [150] A kn 100 kn 160 kn 630 kn 200 ± 100 [200] A ± 125 [250] 69 kn A Floor - Floor 300 kn ± 150 [300] A kn 46 kn 30 kn 400 ± 200 [400] A kn 500 ± 250 [500] 31 kn A Membrane epoxy bonded to the substrate Membrane epoxy bonded to the joint frame Membrane looped into the expansion gap to allow movement Fully waterproof Membranes overlapped and fully bonded together 16 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor 150-500 mm ( 6-20 ) Expansion Gaps Features Surface Hairline serrated surface for improved slip resistance Transatec 1140 : A01 Movement High

17 VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor mm ( 6-20 ) Expansion Gaps Features Surface Hairline serrated surface for improved slip resistance Transatec 1140 : A01 Movement High movement capacity Seismic movement capacity ASTM E-1399 Class I: Thermal Class II: Wind Class III: Seismic Traffic Frequency per day > 25,000 1,000 1,000 > 25, System Options Gap width(s) Height(s) Metal type(s): Colour(s) Fire barrier Waterproofing Pre-assembly in factory 150, 200, 250, 300, 400, 500 mm 40 mm 6063 T5 & T6 aluminium Mill Finish Aluminium minutes Waterproofing membrane Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 17

18 MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall mm ( 1-4 ) Expansion Gaps Transatec 1150 : A01 Transatec 1150 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number Floor - Floor Deck - Deck B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) /-16 [64] 1150-A kn 50 ± 40 [80] 1150-A kn 46 kn 30 kn ± 48 [96] 1150-A kn 100 ± 48 [96] 1150-A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall 25-100 mm ( 1-4 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA)

19 VEXCOLT MECHANICAL EXPANSION JOINT Floor to Floor Floor to Wall mm ( 1-4 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA) compliant across the entire movement cycle Transatec 1150 : A01 Movement and Load Good movement capacity - maximum ± 38mm ASTM E-1399 Class I: Thermal Class II: Wind Very high load capacity - maximum 630 kn (64.24 tonnes) Traffic Frequency per day > 25,000 1,000 1,000 > 25, System Options Gap width(s) 25, 50, 75, 100 mm Height(s) 41 mm Metal type(s): A36/S275 Structural Steel Colour(s) Black (RAL 7021) Fire barrier minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 19

20 METAL EXPANSION JOINT Floor to Floor mm ( 1-3 ) Expansion Gaps Transatec 1170 : S01 Transatec 1175 : S01 Transatec 1170 : S01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 25 ± 5 [10] S (H1) Floor - Floor 50 ± 10 [20] 20 kn 100 kn 30 kn 630 kn 18: 28: 38: S (H1) 75 ± 15 [30] S (H1) Floor - Floor 25 ± 10 [20] S (H1) 50 ± 20 [40] 20 kn 100 kn 30 kn 630 kn 15: 25: 35: S (H1) 75 ± 25 [50] S (H1) When specifying or ordering please add the height (H1) required to the Product Reference. For example 1170-S denotes a joint 38mm high. Transatec 1175 : S01 20 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT METAL EXPANSION JOINT Floor to Floor 25-75 mm ( 1-3 ) Expansion Gaps Features Surface Smooth transit 80-grit surface finish to stainless steel for improved slip resistance Americans with

21 VEXCOLT METAL EXPANSION JOINT Floor to Floor mm ( 1-3 ) Expansion Gaps Features Surface Smooth transit 80-grit surface finish to stainless steel for improved slip resistance Americans with Disabilities Act (ADA) compliant across the entire movement cycle Transatec 1170 : S01 Transatec 1175 : S01 Movement and Load Good movement capacity - maximum ± 25mm ASTM E-1399 Class I: Thermal Class II: Wind Very high load capacity - maximum 630 kn (64.24 tonnes) Traffic Frequency per day > 25,000 2,500 2,500 2, System Options Gap width(s) 25, 50, 75 mm Height(s) 18, 28, 38, 53 mm - Transatec , 25, 35, 50 mm - Transatec 1175 Metal type(s): Top Plates: 304-grade Stainless Steel Optional 316-grade Sub-structure: Galvanised Steel Plate Colour(s) Black (RAL 7021) Fire barrier minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 21

22 SEAL EXPANSION JOINT Floor to Floor to Wall Wall to Wall mm ( 1-3 ) Expansion Gaps Flexatec 1200 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number Floor - Floor Floor - Wall Wall - Wall B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 25 ± 7 [15] A ± 15 [30] - 31 kn 30 kn A ± 25 [50] A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT SEAL EXPANSION JOINT Floor to Floor to Wall Wall to Wall 25-75 mm ( 1-3 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA)

23 VEXCOLT SEAL EXPANSION JOINT Floor to Floor to Wall Wall to Wall mm ( 1-3 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA) compliant across the entire movement cycle Flexatec 1200 : A01 Movement and Load Good movement capacity - maximum ± 25mm ASTM E-1399 Class I: Thermal Class II: Wind Good load capacity - maximum 31 kn (3.16 tonnes) Traffic Frequency per day > 25, > 25,000 - System Options Gap width(s) Height(s) Metal type(s): Colour(s) Fire barrier Waterproofing Pre-assembly in factory 25, 50, 75 mm 55, 64 mm None Black (RAL 7021) coloured seal minutes Not applicable Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 23

24 SEAL EXPANSION JOINT Floor to Floor Deck to Deck mm ( 1-4 ) Expansion Gaps Flexatec 1210 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number Floor - Floor Deck - Deck B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 25 ± 7 [15] A ± 15 [30] A kn 30 kn 120 kn ± 25 [50] A ± 32 [64] A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT SEAL EXPANSION JOINT Floor to Floor Deck to Deck 25-100 mm ( 1-4 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA) compliant

24 tonnes) Traffic Frequency per day > 25,000-10 > 25,000 100 System Options Gap width(s) Height(s) Metal type(s): Colour(s) Fire barrier Waterproofing Pre-assembly in factory 25, 50, 75, 100 mm 18

25 VEXCOLT SEAL EXPANSION JOINT Floor to Floor Deck to Deck mm ( 1-4 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA) compliant across the entire movement cycle Flexatec 1210 : A01 Movement and Load Good movement capacity - maximum ± 32mm ASTM E-1399 Class I: Thermal Class II: Wind High load capacity - maximum 120 kn (12.24 tonnes) Traffic Frequency per day > 25, > 25, System Options Gap width(s) Height(s) Metal type(s): Colour(s) Fire barrier Waterproofing Pre-assembly in factory 25, 50, 75, 100 mm 18 mm None Black (RAL 7021) coloured seal minutes Not applicable Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 25

26 SEAL EXPANSION JOINT Floor to Floor Deck to Deck mm ( 1-4 ) Expansion Gaps Flexatec 1220 : A01 Expansion Joint Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number Floor - Floor Deck - Deck B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 25 ± 7 [15] A ± 15 [30] A kn 30 kn 120 kn ± 25 [50] A ± 32 [65] A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

27 VEXCOLT SEAL EXPANSION JOINT Floor to Floor Deck to Deck mm ( 1-4 ) Expansion Gaps Features Surface Ribbed surface for improved slip resistance Americans with Disabilities Act (ADA) compliant across the entire movement cycle Flexatec 1220 : A01 Movement and Load Good movement capacity - maximum ± 32mm ASTM E-1399 Class I: Thermal Class II: Wind Good load capacity - maximum 36 kn (3.67 tonnes) Traffic Frequency per day > 25, > 25,000 - System Options Gap width(s) Height(s) Metal type(s): Colour(s) Fire barrier Waterproofing Pre-assembly in factory 25, 50, 75, 100 mm 10 mm None Black (RAL 7021) coloured seal minutes Not applicable Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 27

28 28 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

fi re barriers for parking deck Expansion Joints & Fire Compartment Walls Expansion joints are physical breaks in the continuity of construction; a gap that runs through floors, walls and ceilings

29 fi re barriers for parking deck Expansion Joints & Fire Compartment Walls Expansion joints are physical breaks in the continuity of construction; a gap that runs through floors, walls and ceilings which is designed to allow elements of the building to deflect in response to forces. Sometimes these expansion gaps pass through compartment walls, floors and ceilings and, if they do, the fire integrity of the compartment has to be re-established by installing a fire barrier into the expansion gap. Confusion exists between the terms linear gap seal and fire barrier for expansion gaps. A linear gap seal such as a piece of mineral wool is suitable for a linear gap where no movement is anticipated. It is entirely unsuited for use in expansion gaps where, it is anticipated that the gap will open and close. Mineral wool is not designed to open and close in response to structural deflection whilst at the same time maintaining the fire integrity of the compartment. The following fire barriers are suited for use in expansion gaps up to 500mm wide and accommodating seismic movements of up to +/-250mm. They are tested to BS 476 and to UL 2079 and offer the most comprehensive range of fire barriers for expansion gaps in the world. Certain expansion joints create a path for fire and smoke to travel through. Vexcolt s fire barrier systems cover all building requirements and maintain performance during any building movement. 29

30 FIRE BARRIER SYSTEM Floor to Floor to Wall Wall to Wall mm ( 5/8-5 ) Expansion Gaps Fireflex 2000 : A01-A02 Fire Barrier Selection Criteria Load Rating Product Details Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 2 Hour Fire Rated (120 mins) 25 ± 12 [25] A Floor - Floor 35 ± 17 [35] A Floor - Wall 50 ± 25 [50] A Wall - Wall Corner Wall 75 ± 37 [75] A Ceiling - Ceiling 100 ± 50 [100] A ± 25 /-75 [100] A Hour Fire Rated (240 mins) 25 ± 12 [25] A Floor - Floor 35 ± 17 [35] A Floor - Wall 50 ± 25 [50] A Wall - Wall Corner Wall 75 ± 37 [75] A Ceiling - Ceiling 100 ± 50 [100] A ± 25 /-75 [100] A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

VEXCOLT FIRE BARRIER SYSTEM Floor to Floor to Wall Wall to Wall 15-125 mm ( 5/8-5 ) Expansion Gaps Features Movement Easy to install High movement capacity ± 50mm ASTM E-1399 Class I: Thermal Class

31 VEXCOLT FIRE BARRIER SYSTEM Floor to Floor to Wall Wall to Wall mm ( 5/8-5 ) Expansion Gaps Features Movement Easy to install High movement capacity ± 50mm ASTM E-1399 Class I: Thermal Class II: Wind Fireflex 2000 : A01-A02 Material Intumescent graphite layers Class O foam Traffic Frequency per day System Options Gap width(s) Height(s) Metal type(s): Colour(s) Fire barrier Waterproofing Pre-assembly in factory 25, 35, 50, 75, 100, 125 mm Not applicable None Black RAL 7021 intumescent seal BS 476: minutes Waterproofing membrane Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 31

FIRE BARRIER SYSTEM Floor to Floor Wall to Wall Corner 25-500 mm ( 1-20 ) Expansion Gaps Fire Barrier Selection Criteria Load Rating Product Details Fireflex 2100 : A01-A02 Joint Gap Movement

32 FIRE BARRIER SYSTEM Floor to Floor Wall to Wall Corner mm ( 1-20 ) Expansion Gaps Fire Barrier Selection Criteria Load Rating Product Details Fireflex 2100 : A01-A02 Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 2 Hour Fire Rated (120 mins) 25 ± 12 [25] A ± 25 [50] A ± 37 [75] A ± 50 [100] A ± 62 [125] A Floor - Floor 150 ± 75 [150] A Wall - Wall 200 ± 100 [200] A Ceiling - Ceiling 250 ± 125 [250] A ± 150 [300] A ± 175 [350] A ± 200 [400] A ± 225 [450] A ± 250 [500] A Hour Fire Rated (120 mins) 25 ± 12 [25] A ± 25 [50] A ± 37 [75] A ± 50 [100] A ± 62 [125] A Floor - Wall 150 ± 75 [150] A Corner Wall 200 ± 100 [200] A Wall - Ceiling 250 ± 125 [250] A ± 150 [300] A ± 175 [350] A ± 200 [400] A ± 225 [450] A ± 250 [500] A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

$II: Wind Class III: Seismic Fireflex 2100 : A01-A02 Material High-temperature refractory ceramic fibre Stainless steel foil sheath Traffic Frequency per day - - - - - System Options Gap width(s) 25,$ 50, 75, 100, 125, 200, 250, 300, 350, 400, 450, 500 mm Height(s) Not applicable Metal type(s): 304-grade Stainless Steel foil Colour(s) 2B Stainless Steel finish Fire barrier UL 2079: 120 minutes

50, 75, 100, 125, 200, 250, 300, 350, 400, 450, 500 mm Height(s) Not applicable Metal type(s): 304-grade Stainless Steel foil Colour(s) 2B Stainless Steel finish Fire barrier UL 2079: 120 minutes

33 VEXCOLT FIRE BARRIER SYSTEM Floor to Floor Wall to Wall Corner mm ( 1-20 ) Expansion Gaps Features Movement High movement capacity Seismic movement capacity ASTM E-1399 Class I: Thermal Class II: Wind Class III: Seismic Fireflex 2100 : A01-A02 Material High-temperature refractory ceramic fibre Stainless steel foil sheath Traffic Frequency per day System Options Gap width(s) 25, 50, 75, 100, 125, 200, 250, 300, 350, 400, 450, 500 mm Height(s) Not applicable Metal type(s): 304-grade Stainless Steel foil Colour(s) 2B Stainless Steel finish Fire barrier UL 2079: 120 minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 33

34 FIRE BARRIER SYSTEM Floor to Floor Wall to Wall Corner mm ( 1-20 ) Expansion Gaps Fire Barrier Selection Criteria Load Rating Product Details Fireflex 2200 : A01-A02 Joint Gap Movement Eurocode Rating Product Dimensions Product Location Width Capacity (mm) Height Sightline Blockout Number B (mm) ± [Total] H1 (mm) H2 (mm) A (mm) C (mm) 2 Hour Fire Rated (120 mins) 25 ± 12 [25] A ± 25 [50] A ± 37 [75] A ± 50 [100] A ± 62 [125] A Floor - Floor 150 ± 75 [150] A Wall - Wall 200 ± 100 [200] A Ceiling - Ceiling 250 ± 125 [250] A ± 150 [300] A ± 175 [350] A ± 200 [400] A ± 225 [450] A ± 250 [500] A Hour Fire Rated (120 mins) 25 ± 12 [25] A ± 25 [50] A ± 37 [75] A ± 50 [100] A ± 62 [125] A Floor - Wall 150 ± 75 [150] A Corner Wall 200 ± 100 [200] A Wall - Ceiling 250 ± 125 [250] A ± 150 [300] A ± 175 [350] A ± 200 [400] A ± 225 [450] A ± 250 [500] A VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

$A01-A02 Material High-temperature refractory ceramic fibre Stainless steel foil sheath Traffic Frequency per day - - - - - System Options Gap width(s) 25, 50, 75, 100, 125, 200, 250, 300, 350, 400,$

35 VEXCOLT FIRE BARRIER SYSTEM Floor to Floor Wall to Wall Corner mm ( 1-20 ) Expansion Gaps Features Movement High movement capacity ASTM E-1399 Class I: Thermal Class II: Wind Fireflex 2200 : A01-A02 Material High-temperature refractory ceramic fibre Stainless steel foil sheath Traffic Frequency per day System Options Gap width(s) 25, 50, 75, 100, 125, 200, 250, 300, 350, 400, 450, 500 mm Height(s) Not applicable Metal type(s): 304-grade Stainless Steel foil Colour(s) Stainless Steel sheath Fire barrier UL 2079: 120 minutes Waterproofing Waterproofing membrane Pre-assembly in factory Contact Vexcolt APPLICATIONS Airport Terminals Educational Exhibition Centres Department Stores Distribution & Retail Warehouses Factories Hospitals Museums Offi ces & Hotels Parking Places of Worship Residential Buildings Rail, Metros & Elevated Rail Stations Roads & Bridges Shopping Centres Sports Stadiums Supermarkets 35

36 notes for car park solutions 36 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

37 VEXCOLT notes for car park solutions 37

38 notes for car park solutions 38 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W :

39 VEXCOLT 39

40 VEXCOLT United Kingdom T : +44 (0) E : enquiries@vexcolt.com W : Design by The Design Factor, Belfast. June 2014