GUJARAT ENERGY TRANSMISSION CORPORATION LTD TR CIRCLE OFFICE JUNAGADH. COMPLETION PERIOD.

Transcription

1 GUJARAT ENERGY TRANSMISSION CORPORATION LTD TR CIRCLE OFFICE JUNAGADH. COMPLETION PERIOD. Name of Work: Construction of foundation for Transformer bay, fire protection wall & ancillary civil work at 220 kv Timbadi s/s under TR Circle Junagadh. Sr. No. Description of work Period in Days from date of commencement 1 Construction of Structural foundations 45 Days 2 Construction of Equipment foundations 75 Days 3 Construction of Fire Protection wall and Cable Trench 90 Days 4 Metal Spreading and Finishing Work 120 Days Superintending Engineer (TR) TR Circle Office GETCO, JUNAGADH.

2 GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SR. NO. TR Circle Office, Junagadh. ESTIMATE/SCHEDULE B DESCRIPTION QTY. RATE PER AMOUNT 1 Dismantling the B.B. /Bella /U.C.R. masonry work in C.M. or L.M. including scaffolding and throwing away the dismantled stuff with in the lead of 500 Mt. radius & stacking of the useable material etc., complete as directed by E.I.C Cmt Dismantling the C.C. or R.C.C work for foundation and building work and throwing / Stacking the dismantled stuff as directed within the lead of 500 Mt. radius, dressing etc. complete as directed by E.I.C. 3 Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 500M. lead.including refilling the pit after concrecting with excavated stuff only. (A)Hard murrum Party has to carryout the cutting work with pneumatic breaker only, no blasting shall be allowed Cmt Cmt ~do~ as above but in (D) Soft rock not requiring blasting. Party has to carryout the cutting work with pneumatic breaker only, no blasting shall be allowed Cmt ~do~ as above but in (E) Hard rock. Party has to carryout the cutting work with pneumatic breaker only, no blasting shall be allowed Cmt Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. In depth consolidating each deposited layer by ramming and watering Cmt White stone bela masonry block in course in fond & plinth with white stone of approved quality in cement mortar 1:6 [1cement:6 course sand] including racking the joints etc. comp.] At any height Cmt

3 8 Providing and laying cement concrete 1:4:8 (1cement : 4coarse sand : 8 hand broken stone aggregates 40 mm. nominal size) and curing complete excluding cost of from work in :S.O.R Cmt Providing lying controlled cement concrete M 200 and curing comp. exposed work including cost of formwork and reinforcement for reinforced concrete work in column. At any height. 10 Providing lying controlled cement concrete M 200 and curing comp. Excluding the cost of formwork and reinforcement for reinforced concrete work in Foundations footing base of columns and mass concrete Cmt Cmt Providing and laying ordinary exposed cement concrete /M:15 for plain or RCC structure including finishing smooth with curing etc. comp. excl. the cost of form work & excluding the cost of reinforcement - for slab. in Foundation footing base of columns and mass concrete 12 Providing Thermo Mechanically Treated bars [TMT bars] confirmed to IS 1786 FE 415 for RCC work including bending, binding and placing in position etc. completed for G.F. 13 Setting of template & foundation bolts in line and level before concreting of foundation and making arrangement of fixing template in such a way as it remains in position during concrete etc. comp. As directed by EIC. Rate includes supplying and fabricating of template from Mild steel as per template drawing including all material, tools tackles & labours required for that. No Extra payment for preparation of template will be given the template such prepared will be the property of agency. 14 Steel work welded in built up sections, framed work including cutting,hoisting,fixing in position and applying a priming coat of red lead paint (A) In Beams & Joists,Channels,Angles,Tees,Flate with connecting plates of angle cleats as in main & cross beams hips & jack rafter,purlins connected to common rafters and the like Cmt MT NOS MT Providing lying controlled cement concrete M 200 and curing comp. exposed work including cost of formwork and reinforcement for reinforced concrete work in beam Cmt Providing 15mm thick cement plaster single coat on Brick/concrete wall for interior plastering up to floor two level finished even and smooth in cement mortar 1:3[ 1 cement : 3 sand] At any height. 17 Providing white washing with lime on wall surfaces [Two coats] to give and even shade including thoroughly brushing the surface to remove all dirt, dust mortar drops and other foreign matter. At any height SMT SMT

4 18 Providing & placing 50mm thick & 300mm wide prestressed concrete cover (for clear span of up to 1.2 meter in proportion (1:1:5:3) or M-20 necessary reinforcement or 4mm dia HT steel wire-4 Nos. bars and 4mm dia. distribution bars at 150 mm C/C as per drawing & design including providing necessary M.S. bar hooks for lifting arrangement & vibrating with vibrators. Finishing all the surfaces, curing by placing in water pond for ten days etc. complete as directed by E.I.C. ( The rate includes cost of all material required, labour charges, transportation, loading, unloading etc SMT Providing & laying rigid 4kg/cm2 PVC drainage pipe including ecessary fittings like bend, tee,y bend plug etc. fixed with wall by means of clamps & nails with watern tight joints by aproved solution etc.complete as directed by EIC.P. V. C. PIPE - 75mm 20 Providing and fixing to wall ceiling and floor galvanized mild steel tubes [medium grade] of the following nominal bore tube fitting and clamps including making good the wall ceiling and floor [A] 15 MM Dia RMT RMT Providing and fixing to wall ceiling and floor galvanized mild steel tubes [medium grade] of the following nominal bore tube fitting and clamps including making good the wall ceiling and floor [B] 25 MM Dia RMT Providing fixing gun metal check or non-return wheel valve. [B] 25 MM Dia 23 Providing and fixing screw down bib tapes of following size Brass screw down bib tap polished bright. [A]15mm dia 24 Supplying & stacking 25 to 40mm size crushed metal including transportation, filing the box etc. complete as directed by EIC. (Box measurement will be paid with 15% voids deductions)- For yard metal spreading NOS NOS Cmt Labour charges for spreading 25 to 40 mm size metal in yard as directed by EIC. 26 Supplying & stacking Quarry dust including transportation for spreading on road filling the box etc. complete. 27 Labour charges for spreading Quarry dust in yard as directed by EIC SMT Cmt SMT

5 28 Supply, fabrication, cutting, threading of M.S rod including hot dip galvanizing the same of required size and length including 2 nos. of nuts and pack/spring washers etc; complete as directed by E.I.C 29 Drilling of Bore holes 32mm to 40mm dia by means of compressor machine having depth of hole up to 1.00 to 1.20 mt. as decided by Engineer in charge & as per drawing in all sorts of Soil, sand, clay, hard rock etc. truly vertical to existing land with cleaning the same by air & Grouting of Bores holes 32 mm to 40 mm dia with depth up to 1.00 to 1.20 mt by means of Cement, sand, Grit, etc. with utilization of aluminum powder or ACC shrink compound N grout or equivalent any other bonding material as approved by competent authority in suitable content with mixing ramming curing etc. complete including with 20mm dia. of M.S. Anchor bar (Reinforcement) ( The rate includes the cost of MS Anchor bar) as directed by Engineer in charge KGS NOS Earthwork in cutting including preparing the stop and camber and stacking or utilizing the cutting stuff in bank as directed up to 200 meters from the end of cutting with all lead and lift. 1] Hard murrain Party has to carryout the cutting work with pneumatic breaker only, no blasting shall be allowed. 31 Earthwork in cutting including preparing the stop and camber and stacking or utilizing the cutting stuff in bank as directed up to 200 meters from the end of cutting with all lead and lift. 2] Soft rock not requiring blasting. Party has to carryout the cutting work with pneumatic breaker only, no blasting shall be allowed. 32 Earthwork in cutting including preparing the stop and camber and stacking or utilizing the cutting stuff in bank as directed up to 200 meters from the end of cutting with all lead and lift. 3] Hard rock. Party has to carryout the cutting work with pneumatic breaker only, no blasting shall be allowed Cmt Cmt Cmt providing form work with ply shuttering including centring, shuttering, struting & propping etc height of propping & centring below supporting floor to ceiling not exceeding 4 m and removal of the same for cast in situ reinforced concrete and plain concrete work in [A] Foundation, footing,bases of column etc and mass concrete SMT Amt. Total Rs Note: Service tax shall be reimbursed on production of proof of such payments made by the contractor to the appropriate department. Superintending Engineer (TR) GETCO, TR CO JUNAGADH.

6 I/We have read and clearly understood the terms, conditions, Schedule B and Technical specifications put by GETCO on WEB site. I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We am/are willing to carry out the work at % (in words percentage) above/below the estimated cost. Accordingly the total amount of my/our tender works out to Rs. (Rupees ) SIGNATURE OF CONTRACTOR. (With rubber stamp/seal of the company)