CUSH-A-THERM VAPOR BARRIER PROTECTION

Transcription

1 CUSH-A-THERM VAPOR BARRIER PROTECTION

2 Cush-A-Therm AIRTIGHT CRUSH-RESISTANT INSULATION CLAMP Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation. The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines. The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation. It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrier. Wall Thickness Hole Size Length FEATURES Temperature range: -70 F to +250 F (-200 C to +125 C) Flammability is Self-Extinguishing as tested under ASTM D 635 Maintains thermal barrier protection Prevents condensation Properly supports pipe and tube Absorbs vibration Polyurethane foam laminated with a rubber lining UV resistance rated as Excellent as tested under ASTM G7 NOTE: Complete assembly supplied with gold electro-galvanized channel clamp and hardware Hole Size Dimensions (Inches) Copper I.D. Pipe IPS Length Nominal 1 2" Nominal 3 4" Nominal 1" Nominal 1-1 /2" Nominal 2" 1 4 ID - 1 4" " UX " UX " UX " 3 8 ID 1 4" 3 8" " UX " UX " UX " UX " 1 2 ID 3 8" 1 2" 1 4" 2.953" UX " UX " UX " UX " 5 8 ID 1 2" 5 8" 3 8" 2.953" UX " UX " UX " UX " UX " 3 4 ID 5 8" 3 4" " UX " UX " UX " UX " UX " 7 8 ID 3 4" 7 8" 1 2" 2.953" UX " UX " UX " UX " UX " ID 1" 1-1 8" 3 4" 2.953" UX " UX " UX " UX " UX " ID 1-1 4" 1-3 8" 1" 2.953" UX " UX " UX " UX " UX " ID 1-1 2" 1-5 8" 1-1 4" 2.953" UX " UX " UX " UX " UX " ID 1-7 8" 2.953" UX " UX " UX " UX " UX " ID 2" 2-1 8" " UX " UX " UX " UX " UX " ID 2-1 4" 2-3 8" 2" 2.953" UX " UX " UX " UX " UX " ID 2-1 2" 2-5 8" " UX " UX " UX " UX " UX " ID 2-7 8" 2-1 2" 3.937" UX " UX UX " UX " UX " ID 3" 3-1 8" " UX " UX " UX " UX " UX " ID 3-1 2" 3" 3.937" UX " UX " UX " UX " UX " ID 3-1 2" 3-5 8" " UX " UX " UX " UX " UX " ID 4" 4-1 8" 3-1 2" 3.937" UX " UX " UX " UX " UX "

3 AIRTIGHT CRUSH-RESISTANT INSULATION CLAMP INSTALLATION IS AS EASY AS 1-2-3! Cush-A-Therm 1. Insulation slides over pipes. Self adhesive surfaces provide seal. 2 Put in place and glue to insulation. 3. Wrap and seal with ProTape. Cush-A-Therm Insulation Glued to Cush-A-Therm which Avoids Air Space and Loss of Insulation Cush-A-Therm v.s. Plastic Alternative Only Insulation Contacts Pipe no Thermal Conductor Air Space (loss of insulation) Plastic Connector Plastic Connector is Thermal Conductor

4 Cush-A-Therm CUSH-A-CLAMP Cush-A-Clamp Channel mounted clamping systems are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. Cush-A-Clamp fits any standard 1-5 /8" wide channel. The clamp features a unique shoulder stud which is securely fastened to one clamp half. Steel clamps for tube sizes up to 1-3 8" have the Controlled Squeeze design which eliminates over-tightening and rotation while a nylon-insert nut assures a positive lock. OMEGA SERIES Omega Series The Omega Series clamp assembly retains, guides, protects line runs. Attached with two standard fasteners to any flat surface, the clamp eliminates the use of special channels, providing a savings in both space & cost. The cushion is manufactured from a thermoplastic elastomer, it s built tough to withstand the effects of most oils, chemicals and industrial cleaning compounds. CAL-CLAMP INSULATION The Cal-Clamp is a crush-resistant insulation clamp. Works equally well on both hot and cold lines. The Cal-Clamp includes the strut clamps required for installation. Asbestos Free Calcium Silicate, treated for water resistance, encased in a 360 A-653 Galvanized Sheet Metal jacket LOOP CLAMPS Clamps that can be slipped over a tube or wire and closed with a bolt at assembly. Holes provide easy alignment. E.P.D.M. cushion for electrical insulation and vibration absorption. The steel clamps are zinc electroplated for corrosion resistance CUSH-A-CLAW The Cush-A-Claw Grabs your Tube, Pipe, or Hose and holds it in place. The unique one piece patent pending design allows for quick, and simple installation. It will not rust because it s molded from the same TPE Material of some of our other products that you've come to know and trust. ALPHA SERIES Alpha Series Designed for the tough jobs, the Alpha Series U-Bolt Assembly secures pipe runs to any flat surface. The cushion designed provides total load distribution, allowing the U-Bolt to become a full contact hanger, eliminating knife-edge loading. The U-Bolt traps and secures the cushion in place to prevent lateral movement, while nylon insert locknuts provide a positive lock. CUSH-A-CLICK The Cush-A-Click is ideal for the installation of refrigeration systems allowing the barrier seal to run the length of the pipe work without cutting the insulation material. It helps retain an unbroken vapor barrier seal, eliminating the problem of sweating on metal fittings. SADDLE-UP The Saddle-Up Saddle is a formed metal shield designed to allow insulated refrigeration pipe or tubing to pass through the support without need to compromise the vapor barrier and protects from crushing or damage at hanger and support locations. DISTRIBUTED BY: ZSi Foster ZSI, INC Michigan Ave. Canton, MI Tel: (734) Tel: (800) Fax: (734)

5 The SNAP-A-SADDLE provides an easy way to attach insulated pipes to support channel, with one step, tool-free installation. Patent Pending SNAP-A-SADDLE A NEW BREAKTHROUGH DEVELOPED BY INDUSTRY LEADER ZSI

6 Order From: Associated Sales PH: Description Wholesale Net Description Wholesale Net SB225 SNAP-A-SADDLE 2 1 /4 (Black) $6.46 SW225 SNAP-A-SADDLE 2 1 /4 (White) $6.46 SB325 SNAP-A-SADDLE 3 1 /4 (Black) $7.73 SW325 SNAP-A-SADDLE 3 1 /4 (White) $7.73 SB425 SNAP-A-SADDLE 4 1 /4 (Black) $8.40 SW425 SNAP-A-SADDLE 4 1 /4 (White) $8.40 SB525 SNAP-A-SADDLE 5 1 /4 (Black) $10.66 SW525 SNAP-A-SADDLE 5 1 /4 (White) $10.66 SB625 SNAP-A-SADDLE 6 1 /4 (Black) $13.06 SW625 SNAP-A-SADDLE 6 1 /4 (White) $13.06 SB825 SNAP-A-SADDLE 8 1 /4 (Black) $17.20 SW825 SNAP-A-SADDLE 8 1 /4 (White) $ " 3.250" 4.250" 8.627" 5.250" 6.250" FAQ s Why is the Snap-A-Saddle 12 inches long? - The 12 length is long enough to distribute the weight without causing cavitation of the insulation Is the Snap-A-Saddle limited to only a 1-5/8 depth channel? - No, the Snap-A-Saddle can be used in ANY depth channel - *NOTE* competitor products are linited to ONLY using a 1-5/8 depth channel What does the Snap-A-Saddle accomplish? - The Snap-A-Saddle supports insulated pipe over longer runs without the need to clamp Besides the fact that the Snap-A-Saddle is not limited to a particular depth channel, what else sets the Snap-A-Saddle apart from the competitior? - The Snap-A-Saddle is easier and faster to install, less expensive than the alternative, and there is no minimun requirement when ordering Is the 12 inch length the only size available? - Though the 12 inch length is the standard Snap-A-Saddle size, special lengths are available upon request Does the Snap-A-Saddle require tools to install? - No, the Snap-A-Saddle provides an easy way to attach insulated pipes to support channel, with a one step, tool-free installation. What is the temperature range that the Snap-A-Saddle can effectively operate in? - Temp Range: -50º to 275º F ( -46º to 135º C ) Is the material UL listed? - The Snap-A-Saddle is made from UL94-HB1 rated TPV material Is the Snap-A-Saddle ASTM rated? - The Snap-A-Saddle is ASTM E84 rated which is a standard test method for surface burning characteristics of building materials *SELLING POINT* Represented By: - Snap-A-Saddle is made in USA McAllister Group Cush-A-Claw is manufactured under U.S. patent D Rainer Drive Altamonte Springs, FL PH: FAX: