Research Interests. Education Qualifications. Experience in Teaching/ Research

Transcription

1 Dr. G.Beulah Gnana Ananthi Associate Professor Division of Structural Engineering Department of Civil Engineering Anna University Chennai , INDIA (Mobile) (Office) Research Interests Behaviour of Cold -Formed Steel Members Finite Element Analysis Structural Dynamics Composite Structures Education Qualifications Ph.D (Structural Engineering), College of Engineering Guindy, Chennai, Anna University, M.B.A (H.R.M), Indira Gandhi National Open University, Delhi, M.E (Structural Engineering), Bharathidasan University, , (University 2 nd Rank) B.E (Civil Engineering), Bharathidasan University, , (University 7 th Rank) Experience in Teaching/ Research Position held Associate Professor Name of the Institution Department of Civil Engineering, CEG Campus, Anna University, Chennai-25 Duration Nature of From To Duties 2014 Till Date Teaching, Research & Consultancy 1

2 Assistant Professor Lecturer Lecturer Senior Lecturer Lecture Department of Architecture, SAP Campus, Anna University, Chennai-25 Department of Architecture, SAP Campus, Anna University, Chennai-25 B.S.A Crescent Engineering Vandalur, Chennai Tagore Engineering College Chennai Shri Angalaman College of Engineering and Technology, Trichy Teaching & Research Teaching & Research Teaching Teaching Teaching Additional Responsibilities 1. Signing officer Transcript: Controller of Examination, Anna University, Chennai ( ) 2. Deputy controller of Examination (University Departments), Anna University, Chennai (April June 2018) Technical Reviewer for the International Journals 1. Latin American Journal of Solids and Structures. 2. International Journal of Civil Engineering-Springer Publications. 3. SADHANA-Indian Institute of Science and Engineering Publication. 4. Journal of Earth Sciences and Engineering 5. Steel and Composite Structures Research guidance Guided Under Progress M.B.A : 44 - M.E : 9 4 2

3 Ph.D : - 5 M.S by Research : 1 - Grant 1. International Travel Grant to attend the 4 th Euro Asia Civil Engineering Forum 2013, at National University of Singapore, 26 th -28 th June, (Sponsored by Anna University) 2. National Travel Grant Under UGC XII Plan General Development Assistant Scheme to attend the Structural Engineering Convention 2014 (SEC 2014), at Indian institute of Technology New Delhi, 20 th -24 th December, (Sponsored by Anna University) 3. International Travel Grant to attend the 20th International Conference on Concrete Construction Methods and Structural Design, at San Francisco-USA, 6 th -7 th June, (Sponsored by Anna University) Publications in National Journal 1. G.Beulah Gnana Ananthi, G.M.Samuel Knight, Nagesh.R.Iyer, Numerical Analysis of Cold-Formed Steel Open Sections Under Axial Compression, Journal of Structural Engineering (JoSE) (India), April 2012,No.1, Vol. 39, pp.1-8, ISSN G.Beulah Gnana Ananthi, G.M.Samuel Knight, Nagesh.R.Iyer and V.Marimuthu, Behaviour of Cold-Formed Plain Channels Under Compression, Journal of Structural Engineering (JoSE), (India),July 2012, No.1, Vol. 39, pp , ISSN G.Beulah Gnana Ananthi, G.S.Palani, Nagesh.R.Iyer, "A Study on Cold-Formed Steel Web Stiffened Lipped Battened Channel Columns", Journal of Structural Engineering (JoSE), (India), October 2016, No.4, Vol. 43, pp , ISSN G.Beulah Gnana Ananthi, "State-of-the-Art Review on Cold-Formed Steel Channel Sections Under Compression", Journal of Structural Engineering (JoSE), (India), June 2017, ISSN G.Beulah Gnana Ananthi, "Studies On Cold-Formed Steel Battened Box Columns Under Axial Compression", Journal of Structural Engineering (JoSE), (India), October 2017, ISSN

4 Publications in International Journal 1. G.Beulah Gnana Ananthi., G.S Palani and Dr. Nagesh.R. Iyer, Numerical and Theoretical Studies on Cold-Formed Steel Unlipped Channels Subjected to Axial Compression August 2014,Volume 12, Number 1 of Latin American Journal of Solids and Structures, pp:1-17, ISSN G.Beulah Gnana Ananthi, G.M.Samuel Knight, Experimental And Theoretical Study On Cold-Formed Steel Box Stub Columns Under Uniaxial Compression. Arabian Journal for Science and Engineering October 2014, Volume 39, Issue 10, pp: , ISSN X. 3. K.Balasubramanian., A.Siva., G.Beulah Gnana Ananthi and R.Saravanakumar, Experimental Investigation of Unsymmeterical I-Section International Journal of Advanced Information Science and Technology (IJAIST) Vol.32, No.32, December 2014, pp: 46-49, ISSN A.Siva., G.Beulah Gnana Ananthi., K.Balasubramanian., M.Jothiboss, Experimental Investigation on Compressive and Flexural Behaviour of Copper Slag Based Blended Cement", International Journal of Advanced Information Science and Technology (IJAIST) Vol.32, No.32, December 2014, pp: , ISSN G.Beulah Gnana Ananthi, S. Vishnuvardhan and G.M.Samuel Knight, "Experimental, Theoretical and Numerical Study on Thin Walled Steel Single and Compound Channel Sections in Axial Compression", Indian Journal of Engineering & Materials Sciences, October 2015, Volume 22, pp , ISSN G.Beulah Gnana Ananthi, S. Vishnuvardhan and G.M. Samuel Knight, "Experimental and Numerical Investigation on Thin Walled Single and Starred Angle Sections Under Compression", Arabian Journal for Science and Engineering, December 2015, Volume 40, Issue 12, pp , ISSN G.Beulah Gnana Ananthi, "Performance Of Plain And Lipped Cold- Formed Channel Sections in Axial Compression", International Journal of Earth Sciences And Engineering, August 2016, Volume 9, No 4, ISSN

5 8. G.Beulah Gnana Ananthi, "A Study on Cold-Formed Steel Compound Angle Section Subjected to Axial Compression", KSCE Journal of Civil Engineering, DOI /s , ISSN Jayasutha. T, G.Beulah Gnana Ananthi, " A systematic Study of Behavioural Safety in Indian Construction Industry", International Journal of Advance Research in Science and Engineering, March 2018, Vol.No:7 issue No: S.Sayed Ali Fathima, G.Beulah Gnana Ananthi, " A systematic Study of Behavioural Safety in Indian Construction Industry", International Journal of Advance Research in Science and Engineering, March 2018, Vol.No:7 issue No: G. Beulah Gnana Ananthi, A. Jaffer Sathick, M. Abirami, " Experimental Investigation on Shear Behaviour of Fibre Reinforced Concrete Beams Using Steel Fibres" World Academy of Science, Engineering and Technology International Journal of Structural and Construction Engineering Vol:12, No:6, urn:dai: / / Books /Manuals Authored 1. Published a chapter in the book Advances in Structural Engineering titled "An Investigation of the Compressive Strength of Cold-Formed Steel Built-up Channel Section" pp Published a chapter in the book Bloomsbury Publishing India Pvt Ltd, V. Matsagar (ed.), Materials, Design and Testing, pp , ISBN , SEC 2014, at IIT Delhi, 22nd - 24 th December 2014.titled " A Study on Cold-Formed Steel Lipped Built up Channel Sections Subjected To Axial Compression". Training Program Organized 1. Faculty Development Programme on "AR 2251: Design of Structures-I", sponsored by Centre for Faculty Development Anna University, Chennai from 27 th November 2013 to 04 th December 2013 in the Department of Architecture (SAP campus), Anna University, 2. One day Seminar on "Recent trends in Structural Engineering" in the Department of Civil Engineering Anna University, Chennai on 31st March

6 International Conferences Participated 1. G.Beulah Gnana Ananthi, "Damage Detection of Structures based on Neural Network Techniques" Structural Engineering World Convention- 2007, 2 nd 7 th November, IISC Bangalore, India. 2. G.Beulah Gnana Ananthi., Samuel Knight.G.M., "Behavior of Cold- Formed Steel Channel Sections Under Axial Compression", 4 th Euro Asia Civil Engineering Forum (EACEF) 2013, at National University of Singapore, 26 th -28 th June, G.Beulah Gnana Ananthi, G.M.Samuel Knight, Nagesh.R.Iyer, "Behaviour of Cold-Formed Steel Plain Channels Under Eccentric Compressive Loads", 5th International Congress on Computational Mechanics and Simulation 10 th -13 th, December, 2014, CSIR-SERC 4. B.Ashvini., G.Beulah Gnana Ananthi, "Cold-Formed Steel Built-Up Section Subjected to Compression A Review", International Conference on Recent Developments in Civil and Environmental Engineering (ICRDCEE-16), October 24-25, 2016, Alagappa Chettiar college of Engineering and Technology, karaikudi-tamilnadu. 5. G.Beulah Gnana Ananthi., B.Ashvini "Numerical Investigation on Thin Walled Steel Channel Sections", International Conference on Composite Materials and Structures 27 th - 29 th, December, 2017, Indian Institute of Technology, Hyderabad. 6. Lija R.L,G.Beulah Gnana Ananthi, "State-of-the-Art Review On Self Compacting Self Curing Concrete - A Versatile Concrete" International Conference on Innovations in Engineering and Sciences (ICIES'18) 23 rd -24 th March 2018 at Jeppiar SRR Engineering College, 7. Suchampa, G.Beulah Gnana Ananthi, "State-of-the-Art Review On Construction and Demolition Waste" International Conference on Innovations in Engineering and Sciences (ICIES'18) 23 rd -24 th March 2018 at Jeppiar SRR Engineering College, 8. G. Beulah Gnana Ananthi, A. Jaffer Sathick, M. Abirami, 20th International Conference on Concrete Construction Methods and Structural Design, at San Francisco-USA, 6 th -7 th June, (Sponsored by Anna University) 6

7 National Seminar / Symposium / Conference Participated 1. G.Beulah Gnana Ananthi., P.Partheban "Solid Waste Management" ENVIRO National Conference on Control of Industrial Pollution and Environmental Degradation, 3 rd - 4 th February at PSG College of Technology, Coimbatore, India, PP G.Beulah Gnana Ananthi, "Hazardous Household Waste Management", ENVIRONICS 2002, organized by Thiagarajar College of Engg, Feb.27 th to 28 th, 2002, Madurai. 3. G.Beulah Gnana Ananthi, "Disaster Mitigation and Management", Pralayam 2006, organized by SRM University, November 29 th 30 th, 2006, 4. G.Beulah Gnana Ananthi, "Damage Detection of Structures Based on Neural Network Techniques", organized by SRM University, TEACE 2007, Feb 8 th and 8 th, 2007, Chennai,. 5. Chelladurai.I., Beulah Gnana Ananthi.G., and Samuel Knight.G.M. Behaviour of Thin Walled C Sections Under Compressive Loads, National Conference on Advances in Steel Concrete and Composite Structures, organized by Coimbatore Institute of Technology, Tamilnadu, India, 24-25, April, G.Beulah Gnana Ananthi., G.M.Samuel Knight and Nagesh R.Iyer Numerical behavior of Cold-Formed Steel Open Sections under Axial Compression, Seventh Structural Engineering Convention, organized by SERC and IIT Madras at Annamalai University, Chidambaram, Tamilnadu,8 th to 10 th December G.Beulah Gnana Ananthi., G.M.Samuel Knight, Review of codal provisions for cold-formed steel channel sections subjected to axial compression, New Trends in Civil Engineering and Earth Sciences, NTCE-2013, organized by Vasavi College of Engineering, Hyderabad, 5-6 Feb, G.Beulah Gnana Ananthi., K.Balasubramanian and A.Siva, Experimental Investigation on Compressive and Flexural Behaviour of Copper Slag Based Blended Cement", Advances and Innovation in Civil and Mechanical Engineering (AICME'13) at Vel Tech High Tech Dr. Rangarajan Dr. Sakunthala Engineering College, Avadi, 7

8 9. Muthuraman, G.Beulah Gnana Ananthi and K. Bala Subramanian " A Study On The Load Carrying Capacity Of Cold-Formed Steel Built-Up Battened olumns Under Axial Compression" National Conference On Advancements And Challenges In Civil Engineering, 11th April 2014 Valliammai Engineering College, Kattankulathur, Tamilnadu. ISBN V.Thirumurugan and G.Beulah Gnana Ananthi, (2014). "A Study on the Load Carrying Capacity of Cold-Formed Steel Built-up Battened Columns Under Axial Compression", National Conference on Futuristic Innovation & Emerging Trends in Civil Engineering, on 5 th May 2014, organized by B.S.A Crescent University, Chennai, India. 11. G.Beulah Gnana Ananthi, G.S Palani and Nagesh.R. Iyer, "An Investigation of the compressive strength of cold-formed steel Built Up Channel Sections", SEC 2014, at IIT Delhi, 22 nd - 24 th December 2014, ISBN G.Beulah Gnana Ananthi, M.Anbarasu, "A study on cold-formed steel lipped built up channel sections subjected to axial compression", SEC 2014, at IIT Delhi, 22 nd - 24 th December 2014, ISBN G.Beulah Gnana Ananthi, " Investigation on Cold-Formed Steel Single and Built-up Angles under Axial Compression", SEC 2016, at SERC Chennai, 21 st - 23 rd December G.Beulah Gnana Ananthi, " Behaviour of Cold-Formed Steel box and built-up I-section under compression ", SEC 2016, at SERC Chennai, 21 st - 23 rd December Workshop/ Short-term Courses / Faculty Development Programme Participated 1. Short Course on " Finite Elements In Engineering" 2 nd -4 th May 2000, Shanmugha College of Engineering, Thanjavur. 2. Short Term Training program on "ocean Engineering" 14 th -25 th May 2001, at Indian Institute of Technology, Madras. 3. Workshop on "ISTE Sponsored Refresher Course on Proposed revision of IS 800", 5 th - 7 th August, 2004, SRM Institute of Science and Technology, 8

9 4. Short Course on "Basics of Dynamics and a seismic Design", held during May 14 th - 26 th, 2007 at Hindustan College of Engineering, Padur, 5. Short Course on "Architecture and Construction using Steel", August 5 th, 2008, Builders Association of India, 6. Workshop on "Vibration Measurements in Civil Engineering Structures", 26 th -27 th September 2008, at Division of Structural Engineering, Department of Civil Engineering, Anna University, 7. Workshop on "New Provisions in IS ", 29 th -31 st January 2009, at Division of Structural Engineering, Department of Civil Engineering, Anna University, 8. Faculty Development Training Programme on "Design of Steel Structures", held during 22 th - 28 th June, 2009 at Division of Structural Engineering, Department of Civil Engineering, Anna University, 9. Quality Improvement Programme on "Urban and Architectural Conservation", June 7 th to 12 th, 2010, MEASI Academy, 10. One day awareness Course on "UGC XII PLAN SCHEME" organized by Internal Quality Assurance cell, Anna University, Chennai on 13 th March One day awareness Course on "ISO 9001:2008" sponsored by Bureau Veritas in Anna University Chennai on 25 th March Faculty Development Training Programme on "CE 2302-Structural Analysis-I", held during June 5 th - 12 th, 2013 at Division of Structural Engineering, Department of Civil Engineering, Anna University, 13. National level of 3D Student Design Challenge on 26 th October 2013 at ITC Maratha, Mumbai. 14. Author Workshop on "Books/Journal Publishing" conducted by Elsevier Research Solutions on 24 th September 2014, at Anna University, 15. "Author Workshop" conducted by Springer & Anna University, Chennai on 17 th March 2015, at Anna University, 9

10 16. Regional Training Programme on "URKUND- An Anti Plagarism Detection Tool" on 22 th September 2015, at Anna University, 17. Two weeks ISTE STTP Programme on " Introduction to Structural Engineering" from 30 th November -9 th January 2016 through remote center-division of Structural Engineering, Department of Civil Engineering, Anna University, 18. "Routledge Editorial Workshop 2016" organized by Taylor & Francis on 3rd August 2016, at Anna university 19. Training Programme on "Student Evaluation and Question Paper Setting" on 21 st -23 rd September 2016 at Anna University, 20. Training Programme on "Student Evaluation and Question Paper Setting" on 24 th -26 th October 2016 at Anna University, 21. Continuing Education Program on " Limit State Design of Structural Steelwork using Eurocode 3" on 1st December 2016 at Indian Institute of Technology, Madras. 22. "Springer Nature Author Workshop" conducted by Anna University & Springer Nature on 27 th February 2017, at Anna University, 23. Faculty Development Training Programme on "CE 6701-Structural Dynamics & Earthquake Engineering", held during 21 st - 29 th June 2017 at Division of Structural Engineering, Department of Civil Engineering, Anna University, 24. One day Workshop on "intellectual Property Rights" (IPR 2018), held on at College of Engineering Guindy, Anna University, 25. One day Workshop on "Intellectual Property Rights" (IPR 2018), held on at College of Engineering Guindy, Anna University, 26. Two weeks Faculty Training on "Entrepreneurship Development" conducted during 13 th -23 th February, 2018 in Anna University, Chennai-25. Professional Membership Life Member of Indian Society for Technical Education [LM31694] 10