Multilink Latch Duct Interior Plastic Raceway System

Transcription

1 Multilink Latch Duct Interior Plastic Raceway System Item No. Part Number Description 1 MRM17 MOLDING SQUARE PLASTIC 1 ¾ X 1 2 MRF17-OCR CORNER OUTSIDE FOR SQUARE MOLDING 1 ¾ X 1 3 MRF17-ICR CORNER INSIDE FOR SQUARE MOLDING 1 ¾ X 1 4 MRF17-FER CORNER RIGHT ANGLE FOR SQUARE MOLDING 1 ¾ X 1 5 MRF17-EC END CAP FOR SQUARE MOLDING 1 ¾ X 1 6 MRF17-JC SEAM COVERS FOR SQUARE MOLDING 1 ¾ X 1 7 MRM-17 MOLDING SQUARE LATCH DUCT RACEWAY 1 ¾ X 1 8 MRF12-R7 REDUCER FITTING FOR SQUARE MOLDING 1 ¾ TO ¾ 9 MRM17-TRT T FITTING FOR SQUARE MODLING 1 ¾ X 1 10 MRM-75 MOLDING SQUARE LATCH DUCT RACEWAY ¾ X ½ 11 MRS-3TB BOX STORAGE INSIDE LIVING UNIT CONNECTOR VWR DROP CABLE WALL ENTRY HOOF - BASE 13 MRM75-DCW DROP CABLE WALL ENTRY HOOF - COVER 1

2 Latch Duct Interior Plastic Raceway System Raceway Size: ¾ x ½ 1 ¼ x ¾ 1 ¾ x 1 Raceway: MRM75-XX MRM12-XX MRM17-XX Fittings: Seam Cover: MRF75-JC-XX* MRF12-JC-XX* MRF17-JC-XX* End Cap: MRF75-EC-XX* MRF12-EC-XX* MRF17-EC-XX* Right Angle Corner: MRF75-FER-XX* MRF12-FER-XX* MRF17-FER-XX* Inside Corner: MRF75-ICR-XX* MRF12-ICR-XX* MRF17-ICR-XX* Outside Corner: MRF75-OCR-XX* MRF12-OCR-XX* MRF17-OCR-XX* Tee Fitting: MRF75-TRT-XX* MRF12-TRT-XX* MRF17-TRT-XX* Reducer Fitting to ¾ N/A MRF12-0R75-XX* MRF17-R75-XX* Wall Entry Hoof: MRM75-DCW-XX* N/A N/A Slack Stroage Box: MRS-3TB-XX* (Small 4 x4 ) or MRS-6TB-XX* (Large 5 x5 ) Substitute desired color code for XX in part numbers. Ivory (IV), Linen White (LW). Specifications: Multilink Latch Duct Interior Plastic Track Molding is a 1 piece raceway design that hinges open for installation access. The molding can be used to route and protect cabling for low voltage data, voice, video, and fiber optic applications. The raceway is mounted to the wall with installer provided hardware, dependent on the surface to which the molding is being mounted. Cables are installed into the raceway and the top is pressed down to latch it securely. Fittings are available for routing direction changes, extending, and terminating the molding. The fittings include inside and outside elbows, seam covers, inside 90 degree corners, and tee fittings. Excluding seam covers and end caps, all fittings have a base and cover. All bases incorporate a 1 minimum bend radius as recommended for fiber optic cables. Fitting covers fit over the base and snap on to adjacent molding covers. The molding is manufactured using a special purpose profile extrusion alloy resin designed for applications requiring excellent weatherability, impact strength and toughness, chemical resistance, heat resistance and thermal stability, dimensional stability and flame retardance. The fittings are manufactured using an injection grade resin specifically designed for telecommunications enclosure applications and has excellent thermal and mechanical properties and is highly flame retardant. The product can be painted with latex paint. Fill Chart Raceway Size Cable Type EIA/TIA 40% Maximum Fill MRM75 3.0mm jacketed fiber 2 4 MRM12 3.0mm jacketed fiber 2 6 MRM17 3.0mm jacketed fiber 6 14 Fill capacities are based on use of the bend radius protectors and using 3.0mm jacketed fiber drop cable. 2

3 Technical Information: Material: Color: Operating temperature range: Installation temperature range: Raceway: Special purpose profile extrusion alloy rigid Polyvinyl Chloride Fittings: Impact Modified Flame Retardant Polybutylene Terephthalate Interior Ivory (IV), Linen White (LW) -18C-58C (0F-136F) -18C-45C (0F-113F) Impact Resistance: 2.5 ft. lbs. referencing TR1334 section 5.4 Chemical Resistance: Fungus Resistance: Crush Resistance: Retains a minimum of 50% of tensile strength after 30 day exposure to 3% H2SO4,.2N NaOH, NH3, 90% Alchohol, Kerosene, 10% Igepal. ASTM G21 zero rating per GR3126 requirement. 300 lbs per GR3126 requirement. UOM: Raceway: Feet Fittings: 10 pack Warranty: 1 year defects in workmanship/10 year environmental Dimensions: MRM12 MRM75 MRM17 3

4 MRM75 Raceway/Fittings: MRM-75-XX MRM75-DCW-XX MRS-3TB-XX MRF75-JC-XX MRF75-EC-XX MRF75-FER-XX MRF75-ICR-XX MRF75-OCR-XX MRF75-TRT-XX 4 Multilink PO Box 955 Elyria, OH Tel: (440) Fax: (440) sales@multilinkone.com Website:

5 MRM12 Raceway/Fittings: MRM-12-XX MRF12-JC-XX MRF12-EC-XX MRF12-FER-XX MRF12-ICR-XX MRF12-OCR-XX MRF12-TRT-XX MRS-6TB-XX Multilink PO Box 955 Elyria, OH Tel: (440) Fax: (440) Website: 5

6 MRM17 Raceway/Fittings: MRM17-XX MRF17-JC-XX MRF17-EC-XX MRF17-FER-XX MRF17-ICR-XX MRF17-OCR-XX MRF17-TRT-XX Multilink PO Box 955 Elyria, OH Tel: (440) Fax: (440) Website: 6