lnsulated Single Ply Roofing Panels CI/SfB I I (47) I Ln2 I I March 2014

Transcription

1 lnsulated Single Ply Roofing Panels CI/SfB I I (47) I Ln2 I I March 2014

2 Fast-Track Composite Roofing Versatile, Fast-Track Roofing Option IKO Spectradek is a single component, factory pre-engineered roof deck, comprised of a high performance single ply TPE waterproofing membrane with insulation and a trapezoidal steel deck. IKO Spectradek is suitable for both flat and pitched roofs above 1:80 (0.72 ) after deflection, and is also suitable for curved roof applications with a convex curve (45m radius) or concave curve (50m radius). Spectraplan TPE Waterproofing The Spectradek system utilises IKO s Spectraplan TPE as its waterproofing membrane, manufactured using the very latest in polymer technology. Incorporating a range of membranes & accessories, IKO Spectraplan TPE systems combine the best performance characteristics of thermoplastics (e.g. PVC) and elastomerics (e.g. EPDM), and have excellent welding characteristics. These next generation waterproofing systems ensure optimum results during installation and in performance. Spectraplan TPE Membranes also have the additional benefits of being free from plasticisers, chlorine, (H)CFC s, halogens and heavy metals. In addition, they can be recycled into primary products at the end of their long useful life.

3 Features and Benefits Spectraplan TPE Key Benefits Latest polymer technology Environmental benefits No need for solvent cleaning or preparation of laps High resistance to ageing Non capillary construction - does not absorb moisture Rapid, secure welding characteristics Fast track installation Full range of system accessories Manufactured in the UK Rapid speed of welding - saves time on site Environmental With a growing emphasis on protecting our valuable world, building owners and designers are looking towards reduced carbon emissions and minimal use of resources to achieve improvements in environmental and energy performance. IKO Spectradek panels incorporating Spectraplan TPE membranes can achieve an A+ rating in BRE s Green Guide to Specification. With a keen focus on sustainability, IKO Polymeric s product portfolio encompasses insulated waterproofing systems which increase the thermal efficiency and overall lifespan of a building. But its not just our products which demonstrate environmental leadership. From planning and paperwork to manufacturing processes, raw materials and distribution, IKO Polymeric is committed to sustainability throughout the entire product life-cycle. Handling The IKO Spectradek insulated roof panel can be manufactured in both left hand to right hand (LH) and right to left handed (RH) formats. Quality and Durability IKO Spectradek insulated roof panels are manufactured from the highest quality materials to rigorous quality control standards, using state of the art production equipment. They are also manufactured in compliance with both the BS EN ISO 9001 Quality Management System and the BS EN ISO Environmental Management System. All manufacturing facilities are also compliant with BS OHSAS Occupational Health & Safety.

4 Technical Characteristics Materials Substrate: Bright White Polyester: S220GD+ZA hot dip zinc alloy coated to BS EN 10346: Standard internal steel sheet thickness 0.7mm. Membrane: 1.2mm thickness IKO Spectraplan TPE Insulation Core: IKO Spectradek insulated roof panels are manufactured with an ECOsafe and FIREsafe Polyisocyanurate (PIR) core. Product Tolerance Panel End Cut Back Cut to Length -0.05% + 0.1% Cover Width -0mm +3mm Thickness -2mm +2mm End Square -3mm +3mm Standard Cut Back Flush 60mm One end flush Coatings - Internal Sheet Biological IKO Spectradek is available with a variety of finishes to suit the internal conditions of the building. The standard liner is bright white polyester, which provides an easily cleaned surface. Where internal conditions are more demanding, such as high internal humidity or clean room conditions, CLEANsafe coatings are available subject to minimum quantities. These specially designed coatings are ideal for use where the panels are to be cleaned down on a regular basis. IKO Spectradek insulated roof panels are normally immune to attack from mould, fungi, mildew and vermin. No urea formaldehyde is used in the construction and the panels are not considered to be harmful. Air Leakage An air leakage rate of 3m3 /hr/m2 at 50Pa or less can be achieved when using IKO Spectradek roof panels. Available Panel Lengths Standard Lengths 1.5m - 12m Longer Lengths (non-standard) 12m - 16m Shorter Lengths (non-standard) Below 1.5m Note: Additional costs and transport restrictions may apply for non-standard lengths. All lengths may change for export (outside of the UK).

5 Technical Characteristics Dimensions, Weights & Thermal Performance Core Thickness A (mm) Overall Thickness B (mm) U-Value (W/m2k) Weight kg/m2 (0.66mm Deck) IKO Spectradek insulated roof panels have a thermal transmittance (U-Value) as detailed in the table above, calculated using the method required by the building regulations Part L2 (England & Wales) and Building Standards Section 6 (Scotland). Structural Tables mm Deck Unfactored load/span table (use unfactored calculated design wind load values) Span Condition Uniformly distributed loads KN/m2 Span L in metres Downward Single Double Span Condition Uniformly distributed loads KN/m2 Span L in metres Suction One Fastener Two Fasteners Five Fasteners * 2.57* 1.98* 1.56* 1.25* 1.01* Notes: 1. Above figures are for all panel thicknesses. 2. *Fastener table based upon minimum 1.5mm thick steel purlins and suction load on panel. 3. The following deflection limits have been used: - Downward loading L/250 - Suction loading L/ Wind uplift capacity of the panels is dependent on the fixing pattern and it is usually this design condition which is critical for any roofing system. 5. The wind load is unique to each project and calculation for wind loads should be in accordance with BS :1997 Loading for buildings. Code of practice for wind loads. For further information please contact IKO Polymeric Technical Services.

6 IKO Polymeric Coney Green Business Park Coney Green Road Clay Cross Chesterfield S45 9HZ Member of of the IKO Group Sales Support T: T: Northern Northern Ireland Ireland 14 Sanda 14 Road Sanda Road, Ireland Ireland 502 Northwest 502 Northwest Business Business Park Park F: F: Whitehouse, Whitehouse, Newtownabbey Ballycoolin Ballycoolin E: E: Technical Services County County Antrim Antrim BT37 9UB BT37 9UB T: Dublin Dublin T: T: T: T: T: F: F: F: F: F: F: E: E: E: E: E: E: January 2014 IKO Polymeric is a trading division of IKO PLC. VAT Registration No. GB Company Registered in UK No Registered Office: Appley Lane North, Appley Bridge, Wigan, Lancashire, WN6 9AB. Whilst every care is taken to see that the information given in this literature is correct and up to date it is not intended to form part of any contract or give rise to any collateral liability, which is hereby specifically excluded. Intending purchasers of our materials should therefore verify with the company whether any changes in our specification or application details or otherwise have taken place since this literature was issued.