4 polrespolyester.com

Transcription

1

2 Casting Type Polyester Resins Enginered Stone PRE-31 is an orthophthalic, clear, medium reactive, low viscosity, low shrinkage, fit for hot curing polyester resin that is highresistance to atmospheric conditions. PRE-31 is used as a binder in natural composite stone production with breton technology. Solid Surface PRE-30 A is an isophthalic/npg based, medium reactive, medium-high viscosity, pre-accelerated unsaturated polyester resin. Especially designed for a granite-like appearance for solid surface products. Applications are the production of draft holes and canals of the chemical producing factories and production of polyester concrete. The filler must be chemically resistant in such cases. PRE-30 A is also used for production of sanitary materials. The most important specification is that it has a low volumetricshrinkage so that the products made from it, has no deformation. PRE-37 is an isophthalic, high reactivity, high viscosity, acrylic modified, thixotropic, pre-accelerated, filled and UVstabilised unsaturated polyester resin. It has high temperature and chemical resistance. It delivers high performance andoutstanding aspects. It gives flowing, virtually seamless, organic shaped products. It accepts high filler loads up to %60. It iscommonly used in chemical resistant solid surface product manufacturing, kitchen countertops, baths, fast food worktops,internal decoration and architecture where natural apperance is needed. It is available in a vast range of trendsetting patternsand tones, as well as your own custom-designed colors. PRE-3700 is an isophthalic/npg based, medium reactivity, high viscosity, acrylic modified, thixotropic, pre-accelerated, filled and UV stabilised unsaturated polyester resin. It has high temperature and chemical resistance. It delivers high performance and outstanding aesthetics. It gives flowing, virtually seamless, organic shaped products. It accepts high filler loads up to %60. It is commonly used in chemical resistant solid surface product manufacturing, kitchen countertops, baths, fast food worktops, internal decoration and architecture where natural apperance is needed. It is available in a vast range of trendsetting patterns and tones, as well as your own custom-designed colors. Polymer Concrete PRE 36 is an orthophthalic based, pre-accelerated, resilient, low viscosity, non-thixotropic resin with very short gel time. Features are excellent filler wet-out, low shrinkage in concrete mixtures, good chemical resistance and low viscosity for high filler loading. General Purpose PRE-34 is an orthophthalic based, medium-high reactivity, medium viscosity, clear, fast gel-cure unsaturated polyester resin with high filler capacity. This resin can accept up to %70-80 of transparent fillers such as Aluminum Hydroxide and Dolomite. PRE-34 is commonly used in general casting applications, artificial marble, transparent sinks, bath accessories, gifts, statues, bijouterie, bead and kitchen accessories. PRE-35 is an orthophthalic based, medium reactivity, medium viscosity, transparent unsaturated polyester resin. This resin can accept up to %15- more filler compare to other casting type resins. It is suitable to be used with calcium carbonate, aluminum hydroxide, dolomit and quartz. PRE-35 is commonly used for production of casting applications, artificial marble, kitchen tops, bath counters, sanitary materials, bijouterie and gift materials. PRE-61 is an orthophthalic based, medium reactivity, medium-low viscosity unsaturated polyester resin. This resin can accept up to %15- more filler compare to other casting type resins. It is suitable to be used with Calcium Carbonate, Aluminum Hydroxide, dolomit and quartz. PRE-61 is commonly used for production of casting applications, artificial marble, kitchen tops, bath counters, sanitary materials, bijouterie and gift materials. 4 polrespolyester.com

3 Resin Datas PRE-31 PRE-37 TAD PRE-3700 TAD PRE-36 PRE-34 PRE-35 PRE-61 Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) TBPB MEKP MEKP MEKP MEKP PRE-30 A MEKP MEKP MEKP polrespolyester.com

4 GRP Hand Lay-up / Spray-up Resins General Purpose PRE-03 TA is a resilint, orthophthalic, low viscosity, thixotropic, pre-accelerated laminating resin promoted for room temperature cure. Applications are hand lay up or spray up molding of glass reinforced parts, using alumina hydrate as an extender and fire reterdant. Features are fast wet out of chopped strands and easy roll. High thixotropic index for minimized laminates. Fast trim and cure times increase production rate. Non-air inhibited for good surface cure and sanding characteristics. PRE-04 is a rigid, orthophthalic,high viscosity general purpose polyester resin. Features are versatility, good handling properties and stable gel time. PRE-05 is an orthophthalic based, medium-high reactivity, medium viscosity unsaturated polyester resin for thick GRP, FRP and clear casting applications. It can accept high filler loads of Calcium Carbonate, Aluminium Hydroxide or marble powder for casting applications. PRE-05 is suitable for hand lay up and spray up systems for the production of large compozite parts, automotive parts, sea boats, yachts, artificial marble, bijouterie and accesorries. PRE-05 TAB is an orthophthalic based, medium-high reactivity, low-medium viscosity, thixotropic pre-accelerated, blue indicator unsaturated polyester resin for thick GRP, FRP applications. PRE-05 TAB is suitable for hand lay upand spray up systems for the production of large compozite parts, automotive parts, sea boats and yachts. PRE-06 is an orthophthalic based, high reactivity, medium viscosity unsaturated polyester resin for GRP, FRP and clear casting applications. It can accept high filler loads of Calcium Carbonate, Aluminium Hydroxide and marble powder for casting applications, which gives low volumetric shrinkage.the resin has strong brightness and a vivid look. PRE-06 is suitable for hand lay up and spray up systems for the production of accessories, bijouterie, artificial marble, sea boats and yachts. PRE-06 TAB is an orthophthalic based, high reactivity, low-medium viscosity thixotropic pre-accelerated, blue indicator unsaturated polyester resin for GRP, FRP applications.the resin has strong brightness and a vivid look.pre-06 TAB is suitable for hand lay up and spray up systems for the production of large compozite parts, automotive parts,sea boats and yachts. PRE-60 is an orthophthalic based, high reactivity, low viscocity, quick cure unsaturated polyester resin for GRP, FRP and clear casthing applications. It can accept high filler loads of calcium carbonate, aluminium hydroxide and marble powder for casting applications, which gives low volumetric shrinkage.pre-60 is suitable for hand lay up and spray up systems for the production of accessories, bijouterie, artificial marble, sea boats and yachts. PRE-60 TAB is an orthophthalic based, high reactivity, low viscocity, quick cure, thixotropic pre-accelerated, blue indicator unsaturated polyester resin for GRP, FRP applications.pre-60 TAB is suitable for hand lay up and spray up systems for the production of accessories, bijouterie, artificial marble, sea boats and yachts. PRE-63 is an orthophthalic based, medium reactivity, low-medium viscosity unsaturated polyester resin for GRP, FRP and casting applications. It can accept high filler loads of calcium carbonate, aluminium hydroxide or marble powder for casting applications. PRE-63 is suitable for hand lay up and spray up systems and suitable for the production of automotive parts, sea boats, yachts, artificial marble and accesories. PRE-63 TAB is an orthophthalic based, medium reactivity, low-medium viscosity, thixotropic, pre-accelerated, blue indicator unsaturated polyester resin for GRP, FRP applications.pre-63 TAB is suitable for hand lay up and spray upsystems as well as for the production of automotive parts, sea boats, yachts production. 6 polrespolyester.com

5 PRE-77 is an orthophtalic based, high reactive, transparent, low-medium viscosity, low shape deformation, GRP and casting type ofgeneral purpose unsaturated polyester resin. It can be used for obtaining GRP products in hand lay up and sprayup systems. PRE-77 when reinforced with fiberglass has been using widely of in automotive industry, producing sea boats, yachts and modular cabins and more. It can be used as an economical casting type resin when it is mixed with appropriate filler. PRE-60 is an orthophthalic based, high reactivity, medium viscosity unsaturated polyester resin which provides excellent wetting for fiber. It provides strong resistance to heating and gives clear final products. PRE-60 is suitable for hand lay up and spray up systems for the production of accessories, bijouterie, artificial marble, sea boats and yachts. PRE-60 TAB is an orthophthalic based, high reactivity, medium viscosity, quick cure, thixotropic, pre-accelerated, blue indicator unsaturated polyester resin which provides excellent wetting for fiber. It is suitable to be used in big sized parts. It provides strong resistance to heating and gives clear final products. PRE-60 TAB is suitable for hand lay up and spray up systems for the production of outomotive accessories, sea boats and yachts. Resin Datas PRE-03 TA PRE-04 PRE-05 PRE-05 TAB PRE-06 PRE-06 TAB PRE-60 PRE-60 TAB PRE-63 PRE-63 TAB PRE-77 PRE-60 PRE-60 TAB Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP polrespolyester.com

6 GRP Hand Lay-up / Spray-up Resins Acyrilic / ABS Backing PRE-51 TA is an orthophthalic based, medium reactivity, low viscosity, thixotropic, horizontally and vertically usable white coloured unsaturated polyester resin. It provides easy wetting for fiber applications. It has antifoaming, wetting, dispering, additives and accelerator. PRE-51 TA ABS is commonly used in producing ABS bathtubs and shower cabins. PRE-51 TAD is an orthophthalic based, medium reactivity, low viscosity, thixotropic, horizontally and vertically usable white coloured, unsaturated polyester resin. It contains filler and provides easy wetting for fiber applications. It has antifoaming, wetting, dispering, additives and accelerator. It is commonly used in producing ABS bathtubs and shower cabins. PRE-52 TA is an orthophthalic based, medium reactivity, medium viscosity, white coloured, horizontally and vertically usable, thixotropic, pre-accelerated resin. It provides easy wetting for fiber and contains antifoaming, wetting, dispersing, additives and acceletor. It is commonly used in producing acrylic bathtubs and shower cabins. PRE-52 TAD is an orthophthalic based, medium reactivity, high viscosity white coloured, horizontally and vertically usable, thixotropic, pre-accelerated, filled resin. It provides easy wetting for fiber and contains antifoaming, wetting, dispering, additives and accelerator. It is commonly used in producing acrylic bathtubs and shower cabins. PRE-5 TA is a rigid, low reactivity, low viscosity, thixotropic, pre-accelerated for room temperature curing. It is used for acyrilic back up, casting and laminating of high filled glass reinforced components. Resin Datas PRE-51 TA PRE-51 TAD PRE-52 TA PRE-52 TAD PRE-5 TA Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) MEKP MEKP MEKP MEKP MEKP polrespolyester.com

7 GRP Hand Lay-up / Spray-up Resins Low Styrene Emission PRE-5000 is an orthophthalic based, low styrene emission resin with high exoterm, fast gel, medium cure for spray up applications. This resin shows very good fibre wetting and impregnation properties. PRE-5000 is especially developed for hand lay up and spray up applications to produce high performance constructional laminates. PRE-5010 is an orthophthalic based, low styrene emission resin with high exoterm, medium gel, medium cure for spray up applications. This resin shows very good fibre wetting and impregnation properties. PRE-5010 is especially developed for hand lay up and spray up applications to produce high performance constructional laminates. PRE-50 is an orthophthalic based, low styrene emission resin with low exoterm, long gel, medium cure for spray-up applications. This resin shows very good fibre wetting and impregnation properties. PRE-50 is especially developed for hand lay up and spray up applications to produce high performance constructional laminates. PRE-5030 is an orthophthalic based, low styrene emission resin with low exoterm, long gel, long cure for spray up applications. This resin shows very good fibre wetting and impregnation properties. PRE-5030 is especially developed for hand lay up and spray up applications to produce high performance constructional laminates. PRE-5040 TA is a rigid polyester, orthophthalic based, low viscosity, thixotropic, non-air inhibited, medium reactivity, high heatdistortion resin. It is suitable for general laminating, hand lay-up, spray up processes. PRE-5040 TA is especially designed forfiberglass parts. It has excellent wetting and rolling properties beside low odour and styrene emissions. Resin Datas PRE-5000 PRE-5010 PRE-50 PRE-5030 PRE-5040 TA Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % dakika % ( C ) ( C ) MEKP MEKP MEKP MEKP MEKP polrespolyester.com

8 Continuous Laminating Resins PRE-18L is an orthophthalic, high reactivity, low viscosity, light permeable, unsaturated polyester resin. It is commonly used in construction industry as opaque and making roof covers of green houses because of its light permeability. PRE-18Lgives products extremely clear, resistant to yellowing and do not deform in time. PRE-19L is an orthophthalic, medium reactivity, low viscosity, light permeable, unsaturated polyester resin. It is commonly used in construction industry as opaque and making roof covers of green houses because of its light permeability. PRE-19Lgives products extremely clear, resistant to yellowing and do not deform in time. Pultrusion Profile Resins PRE-75 is an isophthalic based, high reactivity, high viscosity unsaturated polyester resin. It is designed for the pultrusion process. PRE-75 has high chemical strength, heat resistance, corrosion resistance, water resistance and other mechanical properties. It provides easy wetting for fiber. PRE-75 is used in making container, dilute acid solutions will be stored, in making equipment for foods that storing or transporting, automotive and construction industry. PRE-76 is an isophthalic based, medium-high reactivity, low viscosity unsaturated polyester resin designed for the pultrusion process. This resin has high corrosion resistance, water resistance, mechanical properties. It provides excellent wetting for fiber. PRE-76 is used in making container, dilute acid solutions will be stored, in making equipment for food that storing or transporting, automotive and construction industry. Resin Datas PRE-18L PRE-19L PRE-75 PRE 76 Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) MEKP MEKP MEKP MEKP polrespolyester.com

9 FOR LIFE..

10 Sıcak Hot Press SMC / BMC Tipi Type Polyester Reçineler Resins PRE-40 is an orthophthalic based, high viscosity, medium-high reactivity, unsaturated polyester resin. It has high heat resistanceand mechanical properties. This resin is ideal for fast and serial production because of its high thickening property. PRE-40is developed for making GRP parts in every size with hot press technique and preparing BMC/SMC dough. It has high fillercapacity. It gives products has very smooth surface and non-wavy. PRE-40 is commonly used in automotive industry, tractor,recycling boxes, roof and wall coverings, natural gas cans, electrical boxes and machinery and equipments. PRE-41 is an orthophthalic based, high viscosity, high reactivity, unsaturated polyester resin. It has high heat resistance and mechanical propperties. It is ideal for fast and serial production because of its high thickening property. PRE-41 is developed for making GRP parts in every size with hot press technique and preparing BMC/SMC dough. It has high filler capacity. It gives products has very smooth surface and non-wavy. PRE-41 is commonly used in automotive industry, recycling boxes, tractor, roof and wall coverings, natural gas cans, electrical boxes and machinery and equipments. PRE-43 is an isophthalic based, high viscosity, high reactivity polyester resin. It has good chemical resistance with its isophtalic base. It has high filler capacity, high mechanical value and especially a very high heat resistance. It provides fast and easy wetting for fiber and gives products has very smooth surface and non-wavy. PRE-43 is commonly used in automotive industry, food service, food storage and catering equipments. PRE-44 is an isophthalic based, high viscosity, high reactivity, unsaturated polyester resin. It has high heat resistance and mechanical properties. It is ideal for fast and serial production because of its high thickening property. PRE-44 is developed for making GRP parts in every size with hot press technique and preparing SMC/BMC dough. Itcan accept filler at high ratios with its has very good wetting characteristic. Infusion / RTM Resins PRE-45 is an orthophthalic based, high reactivity, low viscosity, pre-accelerated, unsaturated polyester resin. This resin is designed for RTM and cold press applications where serial production of two side smooth materials required. It has high mechanical characteristics and gives low volumetric shrinkage with filler. It's viscosity allows to work easily even it is filled with %40-60 Calcium Carbonate and Aluminum Hydroxide. PRE-45 is mainly used in automotive and construction industries. PRE-46 is an orthophthalic based, medium reactivity, low viscosity, pre-accalereted, unsaturated polyester resin. This resin is designed for RTM and cold press applications where serial production of two side smooth materials required. It has high mechanical characteristics and gives low volumetric shrinkage with filler. It's viscosity allows to work easily even it is filled with %40-60 Calcium Carbonate and Aluminum Hydroxide. PRE-46 is mainly used in automotive and construction industries. PRE-48 is a low viscosity hybrid type resin with DCPD. This resin is suitable for RTM, cold press and vacuum infusion systems where serial production of two side smooth materials required. It has high mechanical properties and gives low volumetric shrinkage with filler. It provides these mechanical properties with low viscosity and high filler capacity. It can accept high filler loads of Calcium Carbonate and Aluminum Hydroxide. It's viscosity is at suitable levels even if it is filled with %40-60 Calcium Carbonate and Aluminum Hydroxide. PRE-48 is mainly used in automotive and construction industries for the production of smooth surfaced materials. 11 polrespolyester.com

11 Resin Datas PRE-40 PRE-41 PRE-43 PRE-44 PRE-45 A PRE-46 A PRE-48 Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) MEKP MEKP MEKP MEKP MEKP MEKP MEKP polrespolyester.com

12 Corrosion Resistant Resins PRE-71 TA is a rigid, medium reactive, medium viscosity, thixotropic, pre-accelerated, isophthalic base laminating resin for room temperature curing. It is suitable for hand lay-up, spray-up, spray up winding and centrifugal casting. Promotion of fiberglass reinforced plastic parts, where high chemical resistance and high heat distortion are required. Features are rapid cure, fast trim time, very good wetting and excellent chemical heat and corrosion resistance.meets military specifications and FDA compliance, suitable for certain food contact surface. PRE-72 is a resillient, medium reactive isophthalic resin. İt is a base resin for manufacturing gel-coats.it is suitable for flament winding, pultrusion, press molding processes. When formulated into a gel-coat, PRE-72 polyester can be cured with cobalt naphthenate and mek peroxide.pre-72 provides high elogation, high flexural strenghtand also strong chemical resistant suitable for sanitary ware. PRE-73 is isophthalic based, resistant to chemicals and heat, high reactivity, unsaturated polyester resin. It is suitable for applications requiring high mechanical strength and corrosion resistance. PRE-73 is used in pipes, chemical tanks, petroleum transference, marine vehicles, polyester concrete productions. PRE-73 TAB is isophthalic based, thixotropic pre-accelerated, blue indicator resistant to chemicals and heat, high reactivity,medium-high viscosity, unsaturated polyester resin. It is suitable for applications requiring high mechanical strength and corrosion resistance. PRE-73 TAB is used in pipes, chemical tanks, petroleum transference, marine vehicles, polyester concrete productions. PRE-74 is an isophthalic based, low viscosity, medium reactivity, unsaturated polyester resin which has high resistance for chemical materials. It is ideal for fast and series production because of high thickening property. It can be used for making GRP parts in every size with hot press technique and especialy designed for pultrusion process. PRE-74 is commonly used inautomotive, water and waste water cleaning facilities, chemical process facilities and similar areas. Flame Retardant Resins PRE-1624D FR is a non-halogenated, thixotropic, flame retardant filled unsaturated polyester resin. It achieves the classification V2 according to UL94 standards. It is suitable for where the flame retardance is needed and the chemical and mechanical resistance is not neccessary. This is a light-permeable resin suitable for the production of lighting components in factories and work places, roof covers in parks and gardens, insulation boards, modular cabins and prefabricated housing. PRE-4824D FR is a non-halogenated, thixotropic, flame retardant filled unsaturated polyester resin. It achieves the classification V0 according to UL94 standards. It is suitable for where the flame retardance is needed and the chemical and mechanical resistance is not neccessary. This is a light-permeable resin suitable for the production of lighting components in factories and work places, roof covers in parks and gardens, insulation boards, modular cabins and prefabricated housing. 13 polrespolyester.com

13 Resin Datas PRE-71 TA PRE-72 PRE-73 PRE-73 TAB PRE-74 PRE-1624D FR PRE-4824D FR Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) ,25 MEKP MEKP MEKP ,25 MEKP MEKP MEKP MEKP polrespolyester.com

14 Marble Adhesive Resins PRE-21 is a orthophthalic based, high reactivity unsaturated polyester resin. It can accept high filler loads. PRE-21 is especially desined for the production of synthetic abrasive stone for marble. It is a cold-curing resin even at 0 ºC degrees. It has fast hardening, can be treated in cold weather, non hand sticky after cured and good perfect adhension. It can accept high filler loads. PRE-22 is a medium reactivity, amine accelerated, DCPD based unsaturated polyester resin. PRE-22 is designed for bonding applications. DCPD modification increases high filler load capacity and mechanical properties during application. It is a coldcuring resin even at 0 ºC degrees. It has fast hardening, can be treated in cold weather, non hand sticky after cured and good perfect adhension. PRE-23 is an orthophthalic based, medium-high reactivity, amine-containing unsaturated polyester resin. PRE-23 is desined for the production of marble adhesive putties to stick marble to marble or marble to wall. It can accept high filler loads. It is a cold-curing resin even at 0 ºC degrees. It has fast hardening, can be treated in cold weather, non hand sticky after cured and good perfect adhension. Putty Type Polyester Resins POLRES UPE is an orthophthalic, DCPD based, medium reactivity, amine accelerated, putty type polyester resin. This resin gives perfect hardness, dried in short time and ideal for fast sanding. It can accept high filler loads. POLRES UPE is specially desined for making repair putty for automotive sector, marble adhesive and filling paste. It has the ability to obtain appropriate product by forming formula in desired properties on request when combined with POLRES GMP. POLRES GMP is an orthophthalic, DCPD based, medium reactivity, amine accelerated, putty type polyester resin. This resin gives perfect hardness, dried in short time and ideal for fast sanding. It can accept high filler loads. POLRES GMP is commonly used for making repair putty for aluminum, galvanized metal surfaces and flexible filling paste. It has the ability to obtain appropriate product by forming formula in desired properties on request when combined with POLRES UPE. Filament Winding Resins PRE-64 is an orthophthalic based, medium reactivity, low viscosity unsaturated polyester resin with good mechanical properties. This resin is designed for filament winding proceses. PRE-67 is an isophthalic based, medium reactivity, low viscosity unsaturated polyester resin with good mechanical and chemical properties. This resin is designed for filament winding proceses. 15 polrespolyester.com

15 Resins Datas PRE-21 PRE-22 PRE-23 POLRES UPE POLRES GMP PRE-64 PRE-67 Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) gr BPO gr BPO gr BPO - - max MEKP gr BPO MEKP min. 40 min max MEKP min. 40 min polrespolyester.com

16 Special Resins Button Resins PRE-53 is an orthophthalic based, medium reactivity, high viscosity, high transparent polyester resin. It is used in centrifugal casting applications. PRE-53 is used in making all kinds of buttons, rosaries, trinkets, souvenirs, jewelery and related products. PRE-54 orthophthalic based, medium reactivity, high transparent polyester resin. It is used in centrifugal casting applicationsand in making rod button while thixotropic. Although its structural flexibility is lower than PRE-55, PRE-54 is resistant tobreakage and cracking. PRE-54 T is an orthophthalic based, thixotropic, medium reactivity, high viscosity, high transparent polyester resin. It is used in in making rod button. Although its structural flexibility is lower than PRE-55 T, PRE-54 T is resistant to breakage and cracking. PRE-55 is an orthophthalic based, medium reactivity, high viscosity, high transparent polyester resin. It is used in centrifugal casting applications and in making rod button while thixotropic. Suitable for operation at high rpm in centrifugal casting applications. This resin provides high resistance to breakage and cracking because of it's flexible structure. PRE-55 is used in making first quality buttons, rosaries, trinkets, souvenirs, jewelery and related products. PRE-55 T is an orthophthalic based, thixotropic, medium reactivity, high viscosity, high transparent polyester resin. It is used inin making rod button. Although its structural flexibility is higher than PRE-54 T, PRE-55 T is resistant to breakage and cracking. Flexible Resins PRE-89 is a flexable, medium reactivity, low viscosity with low styrene content polyester resin. Suitable for room temperature fabrication of plaques, furniture trim and wood simulated parts. It has a minimum tack plus toughness and flexibility to withstand handling and shipping rigors. Various fillers may be used with this resin, such as talc, calcium carbonate or lightweight micro balloons. Depending on type and amount of fillers used, finished goods will display different degrees of flexibility and weight. It can be blended with other polyester resins to increase their flexibility. PRE 90 is a orthophthalic base, medium reactivity, low viscosity, low styrene content polyester resin. Features are gel-coatblending base, high resistance to crackings, high elognation, high flexual strenght. Gelcoat Base Resins PRE 4000 is a orthophthalic base, high reactivity, high viscosity polyester resin. It is a base resin for gel-coat and lamination production. Suitable to be used for the applications which requires flexibility at high temperetures. Main chracteristics are, flexibility at high temperutures, good resistance against heat and stable gel-time. PRE is a orthophthalic base, medium reactivity, low viscosity polyester resin. Features are good chemical resistance against crackings, good resistance against fractuations and strong flexibility. PRE-4001 is designed for gelcoat production. PRE is a ısophthalic base, medium reactivity, low viscosity polyester resin. Features are good chemical resistanceagainst crackings, good resistance against fractuations and strong flexibility. 17 polrespolyester.com

17 Resin Datas PRE-53 PRE-54 PRE-54 T PRE-55 PRE-55 T PRE-89 PRE-90 PRE-4000 PRE-4001 PRE-4002 Monomer Content Peroxide Temp. Barcol Hardness HDT + / - (mpas) % min % ( C ) ( C ) MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP MEKP polrespolyester.com

18 Special Resins Tooling-Mould Making Resins PRE-01 TA is an orthophthalic based, medium reactivity, thixotropic, pre-accelerated polyester resin which has low volumetric shrinkage and easy wetting property for fiber. It is used for producing polyester moulds. It does not flow on vertical surfaces. This resin has high resistance to the possible compulsions during mould applications. PRE-02 TA is an isophthalic based, medium-high reactivity, thixotropic, pre-accelerated polyester resin which has low volumetric shrinkage and easy wetting property for fiber. It is used for producing polyester moulds. It does not flow on vertical surfaces.this resin has high resistance to the possible compulsions during mould applications. Saturated Resins PRE-00 is a medium-high viscosity, high reactivity, non styrene content saturated polyester resin. When mixed with polyester resin does not plasticise the polyester resin, very good wet out for pigment paste and also can be grinded. PRE-01 is a medium-high viscosity, high reactivity, non styrene content saturated polyester resin.especially used for pigment paste production. When mixed with polyester resin does not plasticise the polyester resin, very good wet out for pigment paste and also can be grinded. PRE-02 is a high viscosity, high reactivity, non styrene content saturated polyester resin. Especially used for pigment paste production. When mixed with polyester resin does not plasticise the polyester resin, very good wet out for pigment paste and also can be grinded. Resin Datas PRE-01 TA PRE-00 PRE-01 PRE-02 PRE-02 TA + Monomer Content Peroxide Temp. Barcol Hardness + / - (mpas) % min % ( C ) ( C ) MEKP MEKP HDT polrespolyester.com

19 General Purpose Gelcoats PRE-300 FT / TT is an orthophthalic based, transparent, medium-high reactivity thixotropic and pre-accelerated general purpose gelcoat. It has high resistance against yellowing and scratching after the application. PRE-300 is commonly used in production of automotive parts, bath equipments, artificial marble, spoiler, cabins, interior decoration, game parks, truck trailers and similar areas. PRE-310 FT / TT is an orthophthalic based, white, medium-high reactivity general purpose gelcoat. It has highresistance against yellowing and scratching after the application. PRE-310 is commonly used in production of automotiveparts, bath equipments, artificial marble, spoiler, cabins, interior decoration, game parks, truck trailers and similar areas. It is formulated to apply with brush or spray gun in various colors on customer request. Performance Gelcoats PRE-17 FT / TT is an orthophthalic based, brush/spray type, transparent, high reactive thixotropic and pre-accelerated performance gelcoat. It is designed for where the aesthetic appearance is important besides atmospheric, chemical and physical resistance. It is commonly used in sanitary materials, making polyester marble, modular cabins, refrigerated truck panels, pool equipment, roof and wall coverings, water tanks, marine vehicles, bathtub, sanitary materials, pool elements, sea equipments, furniture production and similar areas. It is formulated to apply with brush or spray gun on customer request. PRE-19 FT / TT is an orthophthalic based, brush/spray type, white, high reactive, thixotropic and pre-acceleratedperformance gelcoat. It is designed for where the aesthetic appearance is important besides atmospheric, chemical andphysical resistance. It is commonly used in sanitary materials, making polyester marble, modular cabins, refrigerated truckpanels, pool equipment, roof and wall coverings, water tanks, marine vehicles, bathtub, sanitary materials, pool elements, sea equipments, furniture production and similar areas. It is formulated to apply with brush or spray gun in various colors on customer request. Gelcoat Datas PRE-300 FT PRE-300 TT PRE-310 FT PRE-310 TT PRE-17 FT PRE-17 TT PRE-19 FT PRE-19 TT Application Type Spray Spray Spray Peroxide Temp. + / - (mpas) min % ( C ) MEKP MEKP MEKP MEKP MEKP MEKP MEKP 60 Spray MEKP 60 polrespolyester.com

20 High Performance Gelcoats PRE-09 FT / TT is an isophthalic based, brush/sprey type, transparent, high reactivity, thixotropic and pre-accelerated high performance gelcoat. It has high resistance to chemicals, scratching, impact and heat difference. It gives light colored and minimum turning yellow. It is resistant to sea-water and every kind of water. This is especially formulated for marine applications, yachts, speed boats, kitchen counters, wash basins, chemical tanks, crafts and similar areas. It is formulated to apply with brush or spray gun on customer request. PRE-11 FT / TT is an isophthalic based, brush/sprey type, white, high reactivity, thixotropic and pre-accelerated high performance gelcoat. It has high resistance to chemicals, scratching, impact and heat difference. It gives light colored and minimum turning yellow. It is resistant to sea-water and every kind of water. It is desined for marine applications, yachts, catamaran, speed boats, kitchen counters and similar areas. It is formulated to apply with brush or spray gun in various colors on customer request. PRE-13 FT / TT is an isophthalic/npg based, brush/sprey type, transparent, thixotropic and pre-accelerated gelcoat. It has the maximum performance for chemical, mechanical and atmospheric resistance. It is resistant to acids, bases and chlorine. It is not affected from various heat changes and gives maximum brightness and prevents microblisters on the product. It protects surface from holding stains caused by using detergents, cleaning materials such as HCL, bleach, soda and food wastes. This type gelcoats are commonly used in producing automotive parts, military applications, sanitary equipment, artificial marble, kitchen tops, bath equipments and similar areas. It is formulated to apply with brush or spray gun on customer request. PRE-15 FT / TT is an isophthalic/npg based, brush/spray type, white, thixotropic and pre-accelerated gelcoat. It has the maximum performance for chemical, mechanical and atmospheric resistance. It is resistant to acids, bases and chlorine. It is not affected from various heat changes. It gives maximum brightness and prevents microblisters on the product. It protects surface from holding stains caused by using detergents, cleaning materials such as HCL, bleach, soda and food wastes. It is commonly used in producing automotive parts, military applications, sanitary equipment, artificial marble, kitchen tops, bath equipments and similar areas. It is formulated to apply with brush or spray gun in various colours on customer request. Gelcoat Datas PRE-09 FT PRE-09 TT PRE-11 FT PRE-11 TT PRE-13 FT PRE-13 TT PRE-15 FT PRE-15 TT Application Type Spray Spray Spray + / - (mpas) Peroxide MEKP MEKP MEKP MEKP MEKP MEKP MEKP 60 Spray MEKP 60 min Temp. % ( C ) 21 polrespolyester.com

21 High Performance Marine Gelcoats PRE-100 FT / TT is an isophthalic/npg based, thixotropic, pre-accelerated, high performance, transparent marine gelcoat. Itis especially designed for marine applications, yachts, sailboats, catamarans, speed boats, rescue bots, jet skis where hydrolytic, chemical, mechanical and atmospheric resistance are required behind bright color and flexibility. PRE-100 is resistant to yellowing, cracking, matting and blistering in time by the impacts of atmospheric conditions, sea water and sunlight. It is formulated to apply with brush or spray gun on customer request. PRE-110 FT / TT is an isophthalic/npg based, thixotropic, pre-accelerated, high performance, white marine gelcoat. It is especially designed for marine applications, yachts, sailboats, catamarans, speed boats, rescue bots, jet skis where hydrolytic, chemical, mechanical and atmospheric resistance are required behind bright color and flexibility. PRE-110 is resistant to yellowing, cracking, matting and blistering in time by the impacts of atmospheric conditions, sea water and sunlight. It is formulated to apply with brush or spray gun in various colors on customer request. Sandable Gelcoats PRE-175 FT / TT is an orthophthalic based, medium-high reactivity, filled, paintable, thixotropic and pre-accelerated sandable gelcoat including pigment pastes. It is used in the automotive industry, manufacturing front, back and roof panels of buses, trucks, cabins. It is especially produced as dark gray color and white colour in order to make faults visible during application. It is formulated to apply with brush or spray gun in various colors on customer request. PRE-176 FT / TT is an orthophthalic based, high reactivity, filled, paintable, thixotropic, pre-accelerated, optimum flexibility, suitable for paint drying oven high temperature strength sandable gelcoat including pigment pastes. It is used in the automotive industry, cabins, machine parts, manufacturing front, back and roof panels of buses, trucks, cabins. It is especially produced as dark gray colour in order to make faults visible during application. It is formulated to apply with brush or spray gun. Gelcoat Datas PRE-100 FT PRE-100 TT PRE-110 FT PRE-110 TT PRE-175 FT PRE-175 TT PRE-176 FT PRE-176 TT Application Type Spray Spray Spray + / - (mpas) + Spray min Peroxide MEKP MEKP 60 Temp. % ( C ) MEKP MEKP MEKP MEKP MEKP MEKP polrespolyester.com

22 Chemical Resistant Gelcoats PRE-0 FT / TT is a bisphenolic based, thixotropic and pre-accelerated, transparent gelcoat that is not effected from chemicals at high temperatures because of its high chemical and heat resistance. It is suitable for the production of chemical storage tanks, corrosion resistance surface coatings, mould production, yatchs and other sea vessels. It is formulated to apply with brush or spray gun on customer request. PRE-0 FT / TT is a bisphenolic based, thixotropic and pre-accelerated, transparent white gelcoat that is not effected from chemicals at high temperatures because of its high chemical and heat resistance. It is suitable for the production of chemical storage tanks, corrosion resistance surface coatings, mould production, yatchs and other sea vessels. It is formulated to apply with brush or spray gun on customer request. Tooling Gelcoats Mold ion PRE-700 FT / TT is an isophthalic/npg based, high reactivity, pre-accelerated, thixotropic transparent gelcoat. It has optimal flexibility and stroke resistance. It is suitable for production of moulds which is used in polyester materials production. The most important feature of this gelcoat is it has high resistantance to destruction effects of release agents and styrene on the mould surface during production. It is formulated to apply with brush or spray gun on customer request. Flame Retardant Gelcoats PRE-170 FT / TT is a orthophthalic based, thixotropic, pre-accelerated, halogen-free, filled gelcoat where chemical, mechanicalresistance is not necessary but flame retardant is required. It is produced for the flame, fire and spark risk applications. Itgenerally uses are for carriers in electrical switch units, engine and exhaust parts of boats and fire engine body and similiarapplication areas. It is formulated to apply with brush or spray gun on customer request. Gelcoat Datas PRE-0 FT PRE-0 TT PRE-210 FT PRE-210 TT PRE-700 FT PRE-700 TT PRE-170 FT PRE-170 TT Application Type Spray Spray Spray + / - (mpas) Peroxide MEKP MEKP MEKP MEKP MEKP MEKP MEKP 60 Spray MEKP 60 min Temp. % ( C ) 23 polrespolyester.com

23 Bright Topcoat Gelcoats PRE-180 TT thixotropic and pre-accelerated gelcoat has high level of chemical and heat resistance characteristics. PRE-180 TT canbe applied to a sanded and clean surface with sprey gun. It gives a very smooth, bright and hard surface when it is cured. There is no need to sand in order to have a glossy surface. It is commonly used in coating the outer surface of bijouteri materials and buttons because of excellent brightness and mending of the products that are spoiled in the time. It is formulated to apply with spray gun on customer request. Gelcoat Datas Application Type + / - (mpas) Peroxide PRE-180 TT Spray MEKP 60 min Temp. % ( C ) 24 polrespolyester.com

24 Polres Pigment Pastes is made for coloring resins such as polyester, gelcoat, Acrylic, Epoxy, Polyurethane. POLRES PIGMENT PASTES are manufactured from saturated polyesters, organic and inorganic pigments. POLRES Pigment Pastes are used for colorizing saturated and unsaturated polyester resins as well as cellulosic, acrylic, polyurethane and epoxy systems. Our company can offer opaque primary colours, custom and RAL colours based on request. Our Pigment Pastes also can be used in transparent and custom colour button production, bijouteries as well as for GRP production polrespolyester.com