PIPE INSULATION THERMAL & ACOUSTIC PIPE LAGGING. allproof.com. Page 1

Transcription

1 PIPE INSULATION THERMAL & ACOUSTIC PIPE LAGGING Page 1

2 CONTENTS ISOPIPE 1 ISOPIPE SSR 2 ISOCOIL 2 ISOROLL 3 MAXTAPE 3 4-ZERO 4 E-FLEX SOLAR 6 PIPE SLEEVE 7 ACOUSTIC LAGGING 8 NuWrap 5 Rolls 9 Pre-Cut Junctions 9 Pre-Cut Bends 9 Pre-Cut FWG 9 Aluminium Tape 9 THERMAL TECHNICAL INFORMATION NEW ZEALAND BUILDING CODE CLAUSE H1 H1.3.4 Systems for the heating, storage, or distribution of hot water to and from sanitary fixtures or sanitary appliances must, having regard to the energy source used, (a) limit the energy lost in the heating process; and (b) be constructed to limit heat losses from storage vessels and from distribution systems; and (c) be constructed to facilitate the efficient use of hot water. K-VALUES K-values indicate a materials ability to conduct heat. Insulation materials generally have a low K-value as this indicates poor thermal conductive properties not allowing heat energy to pass through. R-VALUES R-value is a rating which measures the thermal resistance/properties of a material (K-value) with consideration to the materials thickness. A higher R-value indicates a better insualtor. Material thickness (in metres) / K-value = R-value ACOUSTIC TECHNICAL INFORMATION NEW ZEALAND BUILDING CODE CLAUSE G6 OBJECTIVE: G6.1 The objective of this provision is to safeguard people from illness or loss of amenity as a result of undue noise being transmitted between abutting occupancies. FUNCTIONAL REQUIERMENT: G6.2 Building Elements which are commmon between occupancies, shall be constructed to prevent undue noise transimssion from other occupancies or common spaces, to the habitable spaces of household units Sound transmission through building elements, shall be minimised by using one or more of the following construction techniques: (a) Physical separation of building elements comprising each face of any wall, floor or ceiling assembly which is common to two or more occupied spaces. (b) Use of noise control building elements. (c) Avoidance of rigid service connections (e.g. in plumbing) where the reticulation passes through noise control building elements separating different occupancies. (d) Making the noise control installation airtight by sealing all joints between building elements, and around penetrations and service fittings. Allproof Insualtion - Thermal Pipe Lagging

3 ISOPIPE 10 YEAR LIFESSPAN ISOPIPE ISOPIPE Closed Cell Elastomeric Insulation is the ideal solution for the insulation of hot or cold application, dual-temperature systems. ISOPIPE offers the most effective insulation for pipes at the lowest initial cost, thus maximizing the saving of energy. Standard ISOPIPE has an operating range of between -40 C and +105 C. ISOPIPE meets all the NZ requirements for fire ratings, as well as having zero ozone depleting potential, with no CFCs being used in the product, or the manufacturing process. ISOPIPE products are tested accordingly to globally approved standards. Now ISOPIPE products have certified fungal protection and antimicrobial characteristics. Another great development for Allproof s thermal pipe insulation range. Properties Operating Temp: Internal/External: Length Size: K-value R-value Life Span R Value Wall Depth R Value 13mm mm mm C C Internal 2m C Please see table opposite 10 Years Code Description Internal Diameter 13mm Wall Thickness 2M Length Per Carton ISO13x10L 13x10 ISOPIPE TC 2M Length 10mm 65 ISO13x12L 13X12 ISOPIPE TC 2M Length 12mm 63 ISO13x15L 13X15 ISOPIPE TC 2M Length 15mm 55 ISO13x22L 13X22 ISOPIPE TC 2M Length 22mm 39 ISO13x28L 13X28 ISOPIPE TC 2M Length 28mm 33 ISO13x35L 13X35 ISOPIPE TC 2M Length 35mm 26 ISO13x42L 13X42 ISOPIPE TC 2M Length 42mm 24 ISO13x54L 13X54 ISOPIPE TC 2M Length 54mm 17 ISO13x60L 13X60 ISOPIPE TC 2M Length 60mm 12 ISO13x67L 13X67 ISOPIPE TC 2M Length 67mm 14 ISO13x76L 13X76 ISOPIPE TC 2M Length 76mm 10 ISO13x88L 13X88 ISOPIPE TC 2M Length 88mm 11 ISO13x114L 13x114 ISOPIPE TC 2M Length 114mm 10 19mm Wall Thickness ISO19x10L 19X10 ISOPIPE TC 2M Length 10mm 40 ISO19x12L 19X12 ISOPIPE TC 2M Length 12mm 35 ISO19x15L 19X15 ISOPIPE TC 2M Length 15mm 31 ISO19x22L 19X22 ISOPIPE TC 2M Length 22mm 26 ISO19x28L 19X28 ISOPIPE TC 2M Length 28mm 22 ISO19x35L 19X35 ISOPIPE TC 2M Length 35mm 15 ISO19x42L 19X42 ISOPIPE TC 2M Length 42mm 14 ISO19x54L 19X54 ISOPIPE TC 2M Length 54mm 12 ISO19x60L 19X60 ISOPIPE TC 2M Length 60mm 9 ISO19x67L 19X67 ISOPIPE TC 2M Length 67mm 9 ISO19x76L 19X76 ISOPIPE TC 2M Length 76mm 9 ISO19x88L 19X88 ISOPIPE TC 2M Length 88mm 7 ISO19x114L 19X114 ISOPIPE TC 2M Length 114mm 6 25mm Wall Thickness ISO25x15L 25X15 ISOPIPE TC 2M Length 15mm 20 ISO25x22L 25X22 ISOPIPE TC 2M Length 22mm 15 ISO25x28L 25X28 ISOPIPE TC 2M Length 28mm 15 ISO25x35L 25X35 ISOPIPE TC 2M Length 35mm 12 ISO25x42L 25X42 ISOPIPE TC 2M Length 42mm 11 ISO25x54L 25X54 ISOPIPE TC 2M Length 54mm 8 Fire Rating Test: AS/NZS Regulatory Indices: Ignitability Index 0 Range 0-20 Spread of Flame Index 0 Range 0-10 Heat Evolved Index 0 Range 0-10 Smoke Developed Index 5 Range 0-10 Group Number Testing To ISO5660 NZBC C/VM2 Apendix A Group Classification 1 Page 1

4 ISOPIPE (CONTINUED) ISOPIPE SSR PRE SLIT INSULATION ISOPIPE SSR is the ideal solution to retrofit situations. Pre cut, with self adhesive tape along the inner edge and a second overlocking seal, this is a quick, tidy solution to wrapping pipe. > > Pre-slit to reduce install time > > Secure double bonded along slit > > No need for glue or tape Code Description Internal Diameter 2M Length Per Carton 13mm Wall Thickness - R Value 0.3 ISO SSR13X15L 13X15 ISOPIPE SLIT&SEAL 2M Length 15mm 55 ISO SSR13X22L 13X22 ISOPIPE SLIT&SEAL 2M Length 22mm 39 ISO SSR13X28L 13X28 ISOPIPE SLIT&SEAL 2M Length 28mm 33 ISO SSR13X35L 13X35 ISOPIPE SLIT&SEAL 2M Length 35mm 22 ISO SSR13X42L 13X42 ISOPIPE SLIT&SEAL 2M Length 42mm 24 ISO SSR13X54L 13X54 ISOPIPE SLIT&SEAL 2M Length 54mm 17 ISO SSR13X60L 13X60 ISOPIPE SLIT&SEAL 2M Length 60mm 12 ISO SSR13X64L 13X64 ISOPIPE SLIT&SEAL 2M Length 64mm 14 ISO SSR13X76L 13X76 ISOPIPE SLIT&SEAL 2M Length 76mm 10 ISO SSR13X88L 13X88 ISOPIPE SLIT&SEAL 2M Length 88mm 11 19mm Wall Thickness - R Vlue 0.5 ISO SSR19X15L 19X15 ISOPIPE SLIT&SEAL 50M 15mm 25 ISO SSR19X22L 19X22 ISOPIPE SLIT&SEAL 44M 22mm 22 ISO SSR19X28L 19X28 ISOPIPE SLIT&SEAL 40M 28mm 22 ISOCOIL COILED INSULATION ISOCOIL is the most convenient way of carrying insulation for smaller pipe sizes. Simply cut off the length you need for the job. Code Description Internal Diameter 13mm Wall Thickness - R Value 0.3 Meters Per Carton ISOCOIL 9x15 9X15 ISOCOIL 37M/BOX 15mm 37 ISOCOIL 9x22 9X22 ISOCOIL 31M/BOX 22mm 31 ISOCOIL 13X10 13X10 ISOCOIL 27M/BOX 10mm 32 ISOCOIL 13X12 13X12 ISOCOIL 25M/BOX 12mm 30 ISOCOIL 13X15 13X15 ISOCOIL 23M/BOX 15mm 23 ISOCOIL 13X22 13X22 ISOCOIL 19M/BOX 22mm 19 ISOCOIL 13X28 13X28 ISOCOIL 16M/BOX 28mm 16 Page 2 Allproof Insualtion - Thermal Pipe Lagging

5 ISOROLL ROLLED SHEETS > > Closed-cell elastomeric foam thermal insulation in flat sheets > > Excellent flexibility allows shaping and formation around larger pipe sizes and objects such as ducts, bore pipes and boilers > > Ideal for large pipe sizes > > Lengths of up to 14 meters Code Description Thickness Roll Length R Value Standard Rolls ISOROLL 13X14X1 13mm x 14m x 1m ISOROLL 13mm 14m 0.3 ISOROLL 19X10X1 19mm x 10m x 1m ISOROLL 19mm 10m 0.5 ISOROLL 25X8X1 25mm x 8m x 1m ISOROLL 25mm 8m 0.6 MAXTAPE ACCESSORIES MAXTAPE is made from EPDM insulating foam sheet and specially coated with selected acrylic pressure sensitive adhesive to make sure good tacking strength and long service life. It is closed cell, lightweight, having stable and low thermal conductivity value which serves the insulating purpose in retarding heat loss, heat gain and condensation protection. > > Hi Tack Adhesive > > Service (constant) temperature up to +93 C > > UV Stable > > Ideal for difficult to lag areas valves, fixings etc. > > Can be used to finish slit and glued lagging > > Should not be relied on as only seal for slit lagging Code Description Thickness Roll Length Tapes MAXTAPE 50mm Wide Maxtape Thermal 3mm 9m Page 3

6 4-ZERO Allproof 4-Zero pipe insulation has been developed to meet the demanding standards of commercial hot and cold water reticulating systems. With excellent themal insulation performance, 4-Zero provides the energy retention properties required by current building specifications. Aluminium foil faced 4-Zero, meets the needs of the specifier that requires a high performing product while offering optimum resistance to fire. This product gives a zero rating when tested in accordance with AS/ NZS early fire hazard properties of materials. With the added benefit of being UV Stable for a minimum of five years it makes an excellent product of choice. PROJECT APPLICATIONS > > Hospitals and Aged care Facilities > > Hotel and Entertainment > > Commercial Buildings - Offices etc. > > Public Service Facilities and Buildings > > Shopping Centre Complexes > > Multi Level Unit Housing Properties Operating Temp: Internal/External: Length Size: K Value R-value Life Span -40 C C Both Suitable for underground applications 1m C Provided on request 10+ Years PROPERTIES > > Closed Cell pre-formed thermal pipe insulation > > Heat laminated, factory fitted, reinforced aluminium foil face > > Higher density foam for longevity and durability > > UV Stable for a minimum of five years > > Suitable for underground applications > > Resistant to moisture with high vapour resistance - anti-microbial > > Resistant to hydrocarbons and most chemicals > > Non toxic fume performance - BS6853 > > Pre-slit for fast installation Fire Rating Test: AS/NZS Regulatory Indices: Ignitability Index 0 Range 0-20 Spread of Flame Index 0 Range 0-10 Heat Evolved Index 0 Range 0-10 Smoke Developed Index 1 Range 0-10 GREEN PRODUCT > > Low V.O.C. (Green Building Council and Green Star compliant) > > ODP - EM14 - No ozone depleting substances used in both manufacture and composition of the product > > GWP - Zero contribution to Global Warming Potential > > Reuse-Reduce-Recycle - Manufactured using up to 50% recycled material Page 4 Allproof Insualtion - Thermal Pipe Lagging

7 SUITABLE FOR USE IN GROUND 10+ YEAR LIFESSPAN Code Description 1M Length Per Bag 15mm Wall Thickness 4Z 15x13 15mm Wall x 13 ID x 1m Length 96 4Z 15x20 15mm Wall x 20 ID x 1m length 77 4Z 15x25 15mm Wall x 25 ID x 1m length 70 4Z 15x32 15mm Wall x 32 ID x 1m length 46 4Z 15x38 15mm Wall x 38 ID x 1m length 40 4Z 15x51 15mm Wall x 51 ID x 1m length 34 4Z 15x64 15mm Wall x 64 ID x 1m length 24 4Z 15x76 15mm Wall x 76 ID x 1m length 18 4Z 15x89 15mm Wall x 89 ID x 1m length 14 4Z 15x102 15mm Wall x 102 ID x 1m length 12 20mm Wall Thickness 4Z 20x13 20mm Wall x 13 ID x 1m length 63 4Z 20x20 20mm Wall x 20 ID x 1m length 52 4Z 20x25 20mm Wall x 25 ID x 1m length 50 4Z 20x32 20mm Wall x 32 ID x 1m length 38 4Z 20x38 20mm Wall x 38 ID x 1m length 32 4Z 20x51 20mm Wall x 51 ID x 1m length 25 4Z 20x64 20mm Wall x 64 ID x 1m length 18 4Z 20x76 20mm Wall x 76 ID x 1m length 14 4Z 20x89 20mm Wall x 89 ID x 1m length 12 4Z 20x102 20mm Wall x 102 ID x 1m length 10 25mm Wall Thickness 4Z 25x15 25mm Wall x 15 ID x 1m length 54 4Z 25x20 25mm Wall x 20 ID x 1m length 40 4Z 25x25 25mm Wall x 25 ID x 1m length 35 4Z 25x32 25mm Wall x 32 ID x 1m length 34 4Z 25x38 25mm Wall x 38 ID x 1m length 26 4Z 25x51 25mm Wall x 51 ID x 1m length 20 4Z 25x64 25mm Wall x 64 ID x 1m length 15 4Z 25x76 25mm Wall x 76 ID x 1m length 14 4Z 25x89 25mm Wall x 89 ID x 1m length 12 4Z 25x102 25mm Wall x 102 ID x 1m length 9 4Z 25x110 25mm Wall x 110 ID x 1m length 9 Code Description 1M Length Per Bag 38mm Wall Thickness 4Z 38x13 38mm Wall x 13 ID x 1m length 26 4Z 38x20 38mm Wall x 20 ID x 1m length 24 4Z 38x25 38mm Wall x 25 ID x 1m length 20 4Z 38x32 38mm Wall x 32 ID x 1m length 17 4Z 38x39 38mm Wall x 39 ID x 1m length 15 4Z 38x51 38mm Wall x 51 ID x 1m length 12 4Z 38x65 38mm Wall x 65 ID x 1m length 10 4Z 38x76 38mm Wall x 76 ID x 1m length 9 4Z 38x89 38mm Wall x 89 ID x 1m length 7 4Z 38x102 38mm Wall x 102 ID x 1m length 6 4Z 38x110 38mm Wall x 110 ID x 1m length 4 50mm Wall Thickness 4Z 50x13 50mm Wall x 13 ID x 1m length 15 4Z 50x20 50mm Wall x 20 ID x 1m length 15 4Z 50x25 50mm Wall x 25 ID x 1m length 15 4Z 50x32 50mm Wall x 32 ID x 1m length 12 4Z 50x39 50mm Wall x 40 ID x 1m length 10 4Z 50x51 50mm Wall x 51 ID x 1m length 8 4Z 50x65 50mm Wall x 65 ID x 1m length 6 4Z 50x76 50mm Wall x 76 ID x 1m length 6 4Z 50x89 50mm Wall x 89 ID x 1m length 6 4Z 50x102 50mm Wall x 102 ID x 1m length 3 A small selection of sizes are available in stock with the majority being available on an indent basis. Please enquire for further details. Above: 4Zero thermal lagging and pre-cut FWG NuWrap 5 acoustic lagging on Allproof Floor Waste Gully and Four Way Riser System. Page 5

8 E-FLEX SOLAR 10+ YEAR LIFESSPAN Allproof again leads the way with solar and outdoor lagging. E-Flex Solar is our range of UV Stabilised EPDM which doesn t require any additional UV protective coating. E-Flex Solar has an extended operating temperature and an extended 10 year lifespan. > > 2 Meter Lengths, 13mm Wall Thickness > > Sizes available up to 54mm > > Also available in 1 metre wide rolls > > -57C to +150C Operating Temp > > Complies to all NZ Fire Standards Code Description Internal Diameter E-Flex 13x16 13mm wall x 16mm ID x 2 metre length 16mm 68 E-Flex 13x22 13mm wall x 22mm ID x 2 metre length 22mm 49 E-Flex 13x28 13mm wall x 28mm ID x 2 metre length 28mm 39 E-Flex 13x35 13mm wall x 35mm ID x 2 metre length 35mm 29 E-Flex 13x42 13mm wall x 42mm ID x 2 metre length 42mm 24 E-Flex 13x54 13mm wall x 54mm ID x 2 metre length 54mm 17 2M Length Per Carton Properties Operating Temp: Internal/External: Length Size: K-value R-value Life Span -57 C C Both 2m W/m.K 24C Provided on request 10+ years Fire Rating Test: AS/NZS Regulatory Indices: Ignitability Index 0 Range 0-20 Spread of Flame Index 0 Range 0-10 Heat Evolved Index 0 Range 0-10 Smoke Developed Index 5 Range 0-10 Group Number Testing To ISO NZBC C/VM1 Group Classification 2 GREEN PRODUCT > > Meets Green Building Council low VOC > > Recycled Materials were used to make this product > > Zero ozone depleting substances Page 6 Allproof Insualtion - Thermal Pipe Lagging

9 PIPE SLEEVE SUITABLE FOR USE IN GROUND Allproof Pipe Sleeve is designed to offer protection to pipework from ground movement. It is manufactured from closed cell low density polyethylene foam and comes in a range of sizes. Allproof Pipe Sleeve has excellent compression and recovery properties. > > Compatible with all PVC pipe sizes from mm > > Available in 2 metre lengths (40-100mm) > > Easy and fast installation that can be readily cut onsite > > Excellent compression resistance > > Low moisture absorption > > Optimum wall thickness for application (nominal 6.5mm thick wall) Code Sleeve40 Sleeve50 Sleeve65 Sleeve100 Sleeve150 Description 2m x 40mm Ø pipe sleeve 2m x 50mm Ø pipe sleeve 2m x 65mm Ø pipe sleeve 2m x 100mm Ø pipe sleeve 10m x 150mm Ø pipe sleeve GREEN PRODUCT > > Meets Green Building Council low VOC > > Recycled Materials were used to make this product > > Zero ozone depleting substances LONG RUN SLAB APPLICATION For long run applications the product can be joined by overlapping by approximately mm. THROUGH SLAB PIPE RISER APPLICATION Allproof Pipe Sleeve Concrete Slab mm Allproof Pipe Sleeve Concrete Allproof Pipe Sleeve Hard Fill Page 7

10 ACOUSTIC PIPE LAGGING NuWrap 5 For noisy pipes in buildings, NuWrap 5 is the effective and easy-to-install sound lagging solution. Also suitable for ducting and ventilation fans, it is supplied with 4-Zero foil facing as standard. Designed to meet the requirements of the building code, NuWrap 5 is available in rolls and as pre-cut fittings for quick and easy installation. NuWrap 5 Acoustic Pipe Lagging combines acoustic convoluted open cell foam laminated to NuWave acoustic barrier. > > Compliant with all New Zealand building standards for acoustic and fire requirements > > High performance polyurethane de-coupling open cell foam > > Foil faced with scrim reinforced fire resistant aluminium > > Suitable for soil/waste pipes and all types of ductwork > > Low VOC, Green Council Building compliant > > 5.1 kg/m² 25mm convoluted foam > > Continuous operating temperature of 100 C > > Thinner, lighter and easier to install Product Properties Thickness 25mm Standard Roll Size 1.3m x 5m Area Per Roll 6.5m 2 Roll Weight 34.5kg A result of 24dBA can be achieved on a 100mm floor waste gully with NuWrap 5 and the addition of 10mm plaster board. Acoustic Test Bare 100mm SN6 PVC Pipe + NuWrap 5 Acoustic Lagging + 10mm Plaster Board dba *Vipac test 50B TRP March 2011 To achieve the same results without NuWrap 5 the installation requires two layers of 13mm plasterboard to each side of 76mm steel studs with cavity infill of 50mm, 10kg/m 3 glasswool. INSTALLATION: > > Ensure that all pipework has been pressure tested, clean, and no leakage detected. > > Wrap product around pipe with joins facing downwards and a 50mm overlap wherever possible. > > Use 72mm self adhesive foil tape along longitudinal joints and tape a band around the circumference at butt joins and between joints. > > There should be a taped band or cable tie around pipe at approximately every mm spacing > > There must not be any gaps between the NuWrap 5 joints. The smallest gap can result in loss of performance of the product. GREEN PRODUCT > > Low V.O.C. (Green Building Council and Green star compliant) > > ODP - EM19 - No ozone depleting substances used in both manufacture and composition of the product > > Non Toxic Above: Pre-cut FWG NuWrap 5, NuWrap 5 roll, Allproof Drop-in Fire Collars and Allproof Floor Waste Gully and Four Way Riser System. Page 8 Allproof Insualtion - Accoustic Pipe Lagging

11 NUWRAP 5 ROLLS Code Description NW5/25C Roll NuWrap 5/25 CONV 1300mm x 5m x 25mm NW5/25C 40MM NuWrap 5/25 CONV 285mm x 5m x 25mm NW5/25C 50MM NuWrap 5/25 CONV 320mm x 5m x 25mm NW5/25C 65MM NuWrap 5/25 CONV 370mm x 5m x 25mm NW5/25C 80MM NuWrap 5/25 CONV 410mm x 5m x 25mm NW5/25C 100MM NuWrap 5/25 CONV 490mm x 5m x 25mm NW5/25C 150MM NuWrap 5/25 CONV 675mm x 5m x 25mm PRE-CUT BENDS Code Description NW5/25C 40X45BFL 40mm x 45 Bend Flat 5kg Acoustic NW5/25C 40X90BFL 40mm x 90 Bend Flat 5kg Acoustic NW5/25C 50X45BFL 50mm x 45 Bend Flat 5kg Acoustic NW5/25C 50X90BFL 50mm x 90 Bend Flat 5kg Acoustic NW5/25C 65X45BFL 65mm x 45 Bend Flat 5kg Acoustic NW5/25C 65X90BFL 65mm x 90 Bend Flat 5kg Acoustic NW5/25C 100X45BFL 100mm x 45 Bend Flat 5kg Acoustic NW5/25C 100X90BFL 100mm x 90 Bend Flat 5kg Acoustic PRE-CUT JUNCTIONS Code Description NW5/25C 100X50JFL 100mm x 50mm Junction Flat 5kg Acoustic NW5/25C 100X65JFL 100mm x 65mm Junction Flat 5kg Acoustic NW5/25C 100X100JFL 100mm x 100mm Junction Flat 5kg Acoustic PRE-CUT FWG Code Description NW5/25C 80FWGFL 80mm FWG Flat 5kg Acoustic NW5/25C 100FWGFL 100mm FWG Flat 5kg Acoustic ALUMINIUM TAPE Code Description REALTAPE 48mm Reinforced Aluminium Tape 50m per roll REALTAPE72 72mm Reinforced Aluminium Tape 50m per roll Page 9

12 Page 10 ALL