stair edgings & complementary trims

Transcription

1 8

2 1 section section 1 stair edgings & complementary trims Information to ensure the correct selection of stair edging profiles and appropriate inserts along with details of colour availability and complementary trims. Page stair edgings Specification - Peace of Mind Slip-Resistance & Performance Colour Availability aluminium - XT range aluminium Elite ELA + EAR range Traditional A + ADM range Traditional S + H range Traditional G + ADM + PG range Traditional CT range chrome Traditional GC range bronze... Elite ELB range... 1 Traditional BA + BG range PVC-u hardnose - XT range PVC-u hardnose Traditional Hardnose DDA + RNRC + RN range Traditional Metallic Hardnose MR range... 1 flexible pvc complementary trims Guide to Stair Trims & Welded Corners... - Stair Trims Measuring & Templating Welded Returns & Capped Ends Selection Guide Materials

3 to specify a Gradus stair edging is to provide peace of mind - there is no equal peace of mind the law Several areas of guidance and legislation now exist to assist with the selection of suitable stair edgings, to help building owners achieve an inclusive environment in line with the Disability Discrimination Act 199 (DDA). Light Reflectance Values - BS893: guidance on the use of colour and contrast within the built environment to aid access for all users (see pages 16 to 16). BS8300: good practice recommendations for the design of domestic and non-domestic buildings and their approaches to meet the needs of disabled people (see page 166 to 167). The Building Regulations Approved Document M (200) - guidance to help building owners meet their legal duty of ensuring all uses gain access and use its facilities (see page 168). Increased slip-resistance on stairs - BRE - guidance on the best way to assess the types of proprietary nosings that should be provided on non-domestic stairs (see page 169). Gradus has devoted significant resource to product development to ensure our products help meet these requirements. This is backed up by our guarantee statement (see page 163), and all our specification consultants are trained to offer advice and guidance in this area to help you make the right selection. 10

4 guarantee Gradus Accessories, through + years experience in the manufacture of stair edgings, is able to provide the specifier with several guarantees to ensure complete Peace of Mind. Manufacturing Warranty - a wide range of stair edgings carry a 10 year manufacturing warranty. Details can be found on the description page for each stair edging range Insert bond is for life and eliminates the risk of insert bond failure All Gradus stair edgings are designed to meet the latest building regulations flexibility section 1 Commitment to service is behind everything that we do (see page for further details). In addition we are also able to offer a design service to manufacture bespoke solutions to meet special requirements, or a request for a specific colour. See page 170 for details. performance According to statistics produced by the Health & Safety Executive, slips, trips and falls account for more than half of all reported injuries to the general public. Over 100,000 injuries are reported on non-domestic stairs each year and the latest HSE figures show that 100 deaths result directly from falls and trips on stairs. Stair edgings significantly contribute to safety when selected correctly and can help towards achieving an inclusive environment in line with the latest guidance in BS8300 : 2009 and ADM 200. The following key factors need to be considered when selecting a stair edging: slip-resistance the environment in which stair edgings are situated will determine the correct selection of insert material to ensure slip-resistance. Gradus offers a choice of insert types (see pages 12 to 13). fixing a secure fixing is essential. All stair edgings should be installed in line with the installation guidance on page 160. environment the type of building and volume of traffic will determine the correct selection of stair edging. Guidance can be found on page 62. In addition Gradus specification consultants are pleased to offer advice tailored to a particular project and application. health and safety at the forefront of all Gradus product design. The most recent addition is the XT range, featuring an enhanced level of slip-resistance. Details can be found on pages 16 to 21 (Aluminium range) and to 7 (PVC-u Hardnose range). the future We are constantly adding to, and evolving our product range to ensure we offer you the most up-to-date solutions. This brochure contains details of the XT range, a new edge in safety on stairs, and Xtra-grip, a new high performance insert offering increased slip-resistance. To ensure you are kept up to date with all developments from Gradus please ask to be added to our database by contacting Customer Support. 11

5 slip-resistance & performance types of insert - critical choice An insert provides slip-resistance at the step edge to reduce the risk of slips on stairs All Gradus inserts are measured for LRVs to provide a colour contrast to ensure the step edge is clearly visible - see page 1 for colour choice All Gradus inserts are designed and tested to ensure optimum performance throughout the life of the product The environment in which the stair edging is to be used determines the type of insert - see below xtra-grip insert Registered Community Design no Pvc incorporating mineral aggregate and a wear layer Offers increased surface roughness to reduce the risk of slip, particularly where the stair edging may become wet, e.g. stairways close to entrances or where safety flooring is used Suited to areas where health and safety is a priority, e.g. in public buildings such as schools and hospitals Achieves a low risk of slip in both dry and wet conditions (see figure 1) Mineral Aggregate Wear Layer Pvc Base Carrier Registered Community Design no shown in XT stair edging xtra-grip plus insert Registered Community Design no Xtra-grip Plus features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments 12

6 Rubber Composite interior insert Pvc with Mineral Inclusion Pvc with mineral inclusion to provide surface roughness standard Grained Surface grained Suitable for use in internal dry conditions Available in a choice of 2 finishes: Standard and Grained Elite insert available in Standard finish Pvc with Mineral Inclusion Pvc with Mineral Inclusion exterior insert Rubber composite with the addition of aggregate fillers Bonded with epoxy adhesive and suitable for exterior use Achieves a low risk of slip in both dry and wet conditions (see figure 1) Suitable for everyday outdoor use, e.g. car parks, entry and exit steps to shopping centres etc. For extreme exterior conditions, e.g. underpasses, railway bridges etc see Allite stair edgings (pages 80 to 83) Locating Point Aggregate Filler Rubber Composite Pvc with Mineral Inclusion section 1 testing All inserts are tested for: Slip-resistance, surface roughness, chemical and bacterial/fungal resistance Wear test independently carried out by SATRA using the Taber Abrader Method and classified in accordance with the results shown in the figure 1 Slip-resistance tests have been independently undertaken by the Health & Safety Laboratory using the pendulum test (see figure 2) figure 1. figure 2. Pendulum Test Value (PTV) Slip Potential 0-2 High Slip Potential 2-3 Moderate Slip Potential 36+ Low Slip Potential BS8300 : a PTV of at least 36 is required irrespective of wet or dry conditions (see page 167) xtra-grip & xtra-grip plus interior exterior Composition Pvc with Mineral Inclusion and Pvc Wear Layer Pvc with Natural Mineral Fillers Rubber Composite with Aggregate Fillers Environment Interior Dry or Wet Conditions Interior Dry Conditions External Dry or Wet Conditions Slip Potential Dry Conditions Low (PTV Av. 70) Wet Conditions Low (PTV Av. 6) Dry Conditions Low (PTV Av. 68) Dry Conditions Low (PTV Av. 71) Wet Conditions Low (PTV Av. 3) Compatibility Aluminium, Bronze, PVC-u XT & Traditional Stair Edgings Aluminium, Bronze, PVC-u XT, Traditional & Elite Stair Edgings Aluminium, Bronze Traditional Stair Edgings Wear Classification* All Gradus inserts achieve wear classifications of: Group T - Class 3 - Commercial Very Heavy Group T - Class 3 - Light Industrial Heavy * Exterior and interior (standard, grained, elite) tested to BS EN 660-2:1999 and assessed against the requirements of BS EN 69:1997 Xtra-grip and Xtra-grip Plus tested to BS EN 138:200-0,000 cycles Additional insert materials are available in Allite heavy duty stair edgings (see pages 80 to 83) and as Stairtile slip-resistant flooring (see pages 78 to 79). Gradus fusion - bond strength for life Gradus Fusion represents the bond between the insert and the channel. This is at the heart of delivering peace of mind to the specifier and building owner that they have selected a product that will perform throughout its life. Gradus Fusion is represented by two distinct technologies; Adhesive and a mechanical lock (Elite stair edgings). Gradus fusion is a bond for life and this is underwritten by the Gradus manufacturing warranty (see page for details). 13

7 colour availability - stair edgings and complementary trims The range of stair edging colours from Gradus provides a comprehensive solution allowing specifiers and users to achieve colour contrast to the surrounding floorcovering in line with recommendations in The Building Regulations Approved Document M - Access to and use of buildings and BS8300:2009 (see pages 166 to 168). The colours have been developed to provide a wide choice of colour contrast with matching colours for both insert and channel. All colours have been measured for light reflectance/colour contrast (LRV using the CIE Y value - see pages 16 to 16) and have been colour referenced on the NCS colour system (see below for details). channel colours PVC-u hardnose - satin finish Black Ink Midnight Burgundy Evergreen Brown LRV:.99 NCS: 702-B LRV:. NCS: 8010-R70B LRV: 6.77 NCS: R80B LRV:.89 NCS: 6030-R10B LRV: 6.63 NCS: 7020-B70G LRV: 7.1 NCS: 6010-Y70R Nutmeg Bluebell Granite Storm Dove Sage LRV: NCS: 6020-Y80R LRV: 9.76 NCS: 030-R90B LRV: NCS: 602-R LRV: 1.30 NCS: 020-R70B LRV: NCS: 000-N LRV: 29.0 NCS: 10-B70G Alpine Lavender Linen Veranda Glacier Canvas LRV:. NCS: 3020-R90B LRV: 33. NCS: 3010-RB LRV: 37.0 NCS: 3010-Y30R LRV: 1.66 NCS: 3010-G70Y LRV: 2.73 NCS: 202-B LRV:.3 NCS: 200-Y30R Buttercup LRV: NCS: 1070-Y Snowdrift LRV: 80. NCS: 000-N PVC-u hardnose - metallic finish flexible pvc Burnt Almond LRV: 9.92 NCS: 7010-Y0R Zinc LRV: 1.91 NCS: 600-R80B Black Brown Granite LRV:.99 NCS: 702-B LRV: 7.1 NCS: 6010-Y70R LRV: NCS: 602-R Doubloon LRV: NCS: 20-Y Silver LRV: 8.29 NCS: 200-R80B Dove LRV: NCS: 000 N Snowdrift LRV: 80. NCS: 000-N NCS colour references Gradus is a member of NCS (Natural Colour System) and utilises the NCS reference codes shown above each colour. NCS is a user friendly colour language and is the only colour system that describes colour exactly as we see it. NCS is used by professionals as a tool for precise colour communication, selection and specification. For further information visit the NCS website - Property of and used under licence from the Scandinavian Colour Institute AB, SCI-Sweden se, Stockholm 200. See for NCS-standard samples. 1 Please note: Due to the limitations of the printing process, colours within this leaflet should not be relied upon for colour matching. An accurate colour match can only be achieved by requesting the relevant product sample(s) from Gradus Customer Support on

8 insert colours For types of insert (see pages 12 to 13). xtra-grip and xtra-grip plus inserts Registered Community Design no Key Xtra-grip Xtra-grip Plus Carbon Raven Deepsea Navy Truffle Conker Blueprint Shark Rock Marl LRV:.01 NCS: 802-B LRV:.9 NCS: 8010-R70B LRV: 7.8 NCS: 8010-Y0R LRV: 9.81 NCS: 6020-R90B LRV: NCS: 700-R0B Hunter Forest Hardnose - Black Pebble Cliff Hardnose - Ink Vapour Lunar Hardnose - Brown Oat Bone Hardnose - Bluebell Zest Sulphur Hardnose - Granite Iceberg Diamond LRV: 9.29 NCS: 7020-B70G LRV: NCS: 0-N LRV: 39.7 NCS: 202-B LRV: 0.66 NCS: 200-Y30R LRV: 1.11 NCS: 1070-Y LRV: 81.8 NCS: 000-N section 1 Hardnose - Evergreen Hardnose - Dove Hardnose - Glacier Hardnose - Canvas Hardnose - Buttercup Hardnose - Snowdrift interior insert - standard finish Jet LRV:.6 NCS: 802-B Ink LRV:.96 NCS: 8010-R70B Midnight Burgundy Evergreen LRV: 6.6 NCS: 6030-R80B LRV:.70 NCS: 6030-R10B LRV: 6.69 NCS: 7020-B70G Coffee LRV: 6.0 NCS: 8010-Y0R Hardnose - Black Hardnose - Brown Nutmeg LRV: 8.1 NCS: 6020-Y80R Ocean LRV: 8.00 NCS: 6020-R90B Lead Storm Steel LRV: NCS: 700-R0B LRV: 1.38 NCS: 020-R70B LRV: NCS: 0-N Sage LRV: 29.3 NCS: 10-B70G Hardnose - Bluebell Hardnose - Granite Alpine Lavender Linen Veranda LRV: 3.67 NCS: 3020-R90B LRV: NCS: 3010-RB LRV: 38.9 NCS: 3010-Y30R LRV: NCS: 3010-G70Y Hardnose - Dove Glacier LRV: 2.09 NCS: 202-B Canvas LRV: 3.27 NCS: 200-Y30R Buttercup LRV:. NCS: 1070-Y Snowdrift LRV: NCS: 000-N Cloud LRV: 28.7 NCS: 10-R70B Poppy LRV: NCS: 2070-R Photoluminescent LRV: lit conditions Photoluminescent insert is available in traditional channels with inserts that are 0mm or less. interior insert - grained finish Black Brown Bluebell Granite Dove LRV: 6.7 NCS: 702-B LRV: NCS: 6010-Y70R LRV: NCS: 030-R90B LRV: 13. NCS: 602-R LRV: 23. NCS: 000-N exterior insert Nightsky LRV:. Lignite LRV: 10. Sunrise LRV: 6.38 Nebula LRV: 6.71 for samples contact customer support call: imail@gradusworld.com visit: 1

9 aluminium - XT range the new edge in safety for stairs description The XT range offers the ultimate solution in reducing slips, trips and falls on stairs and has been developed in line with the latest legislation and guidelines such as Approved Document M, BS8300 : 2009 and BRE (see pages 166 to 169). The Gradus XT range comprises aluminium channels with a choice of slip-resistant inserts that extend around the leading edge of the stair edging to ensure that foot contact is always made with the slip-resistant element of the stair edging. XT range Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing specialist bond for additional strength extended insert design ensures maximum safety underfoot profile availability Gauge of profiles suitable for most floorcoverings. See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Choice of profile to suit traffic levels e.g. single or double channel New CXT range for ceramics, stone and marble (see page 21) New PVC-u Hardnose XT range (see pages to 7). finishes / environment When specifying a double channel stair edging both inserts should be the same colour and should be of a contrasting colour to the surrounding floor finish Choice of insert: Xtra-grip - for interior areas at risk from spillage or wet conditions e.g. stairways close to entrances or where safety flooring is used Xtra-grip Plus - features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments Interior (Standard) - suitable for use in internal dry conditions installation / cleaning & maintenance Guidelines can be found on page 160 to 161 recess to accommodate floorcovering ensures secure fit of profile to step backing points help to hold floorcovering in place locking mechanism secures insert in place services Technical Services Profiles can be fabricated Samples Measuring and templating Design Service 10 year warranty 16

10 XT range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus or Interior Gauge Typically used with resilient flooring or where no surface floorcoverings are used Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. Patent applied for - Application no Registered Community Design no ASXT20 recommended trim: TAXT2, TAXTB aluminium - XT range visit: ASXT20 section 1 ASRXT12 recommended trim: TAXT2, TAXTB Ramp back profiles are suitable for use on steps where no surface floorcoverings are used. When used with resilient flooring ramp back profiles should be installed on top of the floorcovering. 6 AKXT0A recommended trim: TAXT2, TAXTB 92 AKRXT2 recommended trim: TAXT2, TAXTB Registered Community Design Application no now available with new Gradus xtra-grip plus insert 67 ARXT81R 36 colour availability Aluminium Channel: Mill finish - can also be supplied anodised. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Buttercup, Canvas, Coffee, Evergreen, Glacier, Ink, Jet, Lead, Ocean, Snowdrift, Steel. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages 20 and to 9. For further information on the XT range, including NBS specifications and CAD drawings, visit or contact Gradus Customer Support on

11 aluminium - XT range XT range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus or Interior Gauge Typically used with resilient flooring Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. Patent applied for - Application no Registered Community Design no ADXT3 2 ASXT11 recommended trim: TAXT2, TAXTB 2 ADXT1 recommended trim: TAXT2, TAXTB ASXT12 recommended trim: TAXT2, TAXTB 1 now available with new Gradus xtra-grip plus insert 36 2 AKXTA recommended trim: TAXT2, TAXTB 2 ADXT2 recommended trim: TAXT2, TAXTB AKXT2 recommended trim: TAXT2, TAXTB 1 2 ARXT colour availability Aluminium Channel: Mill finish - can also be supplied anodised. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Buttercup, Canvas, Coffee, Evergreen, Glacier, Ink, Jet, Lead, Ocean, Snowdrift, Steel. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages 20 and to 9. 18

12 XT range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus or Interior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. Patent applied for - Application no Registered Community Design no GXT11 recommended trim: TAXT2 aluminium - XT range visit: GXT12 section 1 3 ADXT3 recommended trim: TAXT2 81 GXT12 recommended trim: TAXT2 9 3 Design Service see page 170. GXT1 recommended trim: TAXT2 3 ADXT recommended trim: TAXT2 81 GXT2 recommended trim: TAXT2 9 3 GRXT81 3 For further information on the XT range, including NBS specifications and CAD drawings, visit or contact Gradus Customer Support on

13 side trims and welded corners TAXT2 with contoured edge to provide a flush, neat finish to the stair edging profile Side trims and welded corners are designed to form a neat and attractive edge around the open end of a step by concealing the edge of the floorcovering and stair edging. Gradus side trims TA2 and TAB can be ordered in straight lengths for onsite fabrication or can be supplied as pre-formed welded corners TAXT2 and TAXTB. When ordered as TAXT2/TAXTB the apex of the welded corner is contoured to a 10mm radius to match the curved edge design of the XT stair edging profiles, providing a flush, neat finish. gauge 6mm 8mm 10mm TC1 clip adjusts to provide a 6mm, 8mm or 10mm up stand on the tread or riser (can be removed after curing) TAXT2 gauge Fixed Flange 13 TC1 clip PVC-u 26 recess to accommodate floorcovering ensures secure fit of profile to step TAXTB to suit up to 3.mm resilient floorcoverings welded corners & 90 Site Section Gauge LH or RH Universal Fixing Join 2 TAXT mm TC1 Clips butt TAXTB 3.mm Fixed Tab butt TAB Aluminium TA2 Aluminium

14 CXT range aluminium - CXT range for ceramics, stone and marble visit: For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip Plus or Interior Gauge Typically used with ceramics, stone and marble Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. Patent applied for - Application no Registered Community Design no CXT1 section 1 10 CXT1 available Summer 2009 Registered Community Design Application no CXT2 available Summer 2009 Registered Community Design Application no CXT3 available Summer 2009 Registered Community Design Application no ceramic tile 38 apply additional tile adhesive to fixing flange and underneath of profile tile adhesive colour availability Aluminium Channel: Mill finish - can also be supplied anodised. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Buttercup, Canvas, Coffee, Evergreen, Glacier, Ink, Jet, Lead, Ocean, Snowdrift, Steel. Diagram shows CXT1 fitted with ceramic tile. For full details on Colour Availability see pages 1 to 1. For further information on the XT range, including NBS specifications and CAD drawings, visit or contact Gradus Customer Support on

15 aluminium the original stair edging description An extensive range of attractive and hardwearing stair edgings comprising aluminium channels with slip-resistant inserts. Used in conjunction with floorcoverings from all major manufacturers. Suitable for all commercial and most industrial applications. Stair edgings help to achieve an inclusive environment in line with latest legislation and guidelines such as Approved Document M and BS8300 : 2009 (see pages 166 to 168). which stair edging? profile availability Gauge of profiles suitable for most floorcoverings. See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Choice of profile to suit traffic levels e.g. single or double channel finishes / environment When specifying a double channel stair edging both inserts should be the same colour and should be of a contrasting colour to the surrounding floor finish Choice of insert: Xtra-grip - for interior areas at risk from spillage or wet conditions e.g. stairways close to entrances or where safety flooring is used Xtra-grip Plus - features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments Interior (Standard, Grained and Elite) - suitable for use in internal dry conditions Exterior - suitable for everyday outdoor use, e.g. car parks, entry and exit steps to shopping centres etc. For extreme exterior conditions see Allite (pages 80 to 83) Traditional Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing Elite Concealed fixing eliminating the need for screw head cover plugs installation / cleaning & maintenance Guidelines can be found on page 160 to 161 services Technical Services Profiles can be fabricated Samples Measuring and templating Design Service 10 year warranty 22

16 elite aluminium elite range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Interior Gauge EAR are typically used with resilient flooring or where no surface floorcoverings are used ELA are typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas EAR 31 0 Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. Ramp back profiles are suitable for use on steps where no surface floorcoverings are used. When used with resilient flooring ramp back profiles should be installed on top of the floorcovering. 60 EAR 11 ramp back recommended trim: TAC, TA, TA section 1 77 EAR 31 0 ramp back ELA 72 profile can be used on square and some rake back steps 3 8 Elite stair edgings offer a secured insert with the benefit of a concealed mechanical fixing. 0 ELA 11 recommended trim: TAC, TA, TA ELA 11 0 recommended trim: TAC, TA, TA ELA 12 recommended trims: TAC, TA, TA colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Elite Insert is supplied separately from the channel and must be specified separately. The final 2 digits in the profile code indicate the width of insert required. ELINS (mm), ELINS0 (0mm). For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 23

17 elite aluminium elite range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Interior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. ELA 31 Elite stair edgings offer a secured insert with the benefit of a concealed mechanical fixing. 0 ELA 1 recommended trims: TAC, TA, TA ELA 1 0 recommended trim: TAC, TA, TA ELA 2 recommended trims: TAC, TA, TA Design Service see page ELA ELA 30 3 ELA colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Elite Insert is supplied separately from the channel and must be specified separately. The final 2 digits in the profile code indicate the width of insert required. ELINS (mm), ELINS0 (0mm). For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 2

18 elite aluminium elite range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Interior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. ELA ELA recommended trim: TA ELA 127 recommended trim: TA ELA 17 0 recommended trim: TA ELA9110 and ELA9310 for use with carpet tiles with a pre-bonded underlay. ELA not available curved recommended trim: TA ELA not available curved 2 For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 2

19 traditional aluminium - A range A range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with resilient flooring or where no surface floorcoverings are used Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. ADM Ramp back profiles are suitable for use on steps where no surface floorcoverings are used. 72 When used with resilient flooring ramp back profiles should be installed on top of the floorcovering. AS20 ramp back XT range AS20 and AK0A also available as XT profiles see page 17. ADM ramp back 67 0 AK0A ramp back ADM6 ramp back 6 AS10 ramp back For guidance on the use of ADM profiles see page 168. colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 26

20 traditional aluminium - A range A range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with resilient flooring Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. AS AS11 recommended trim: TAB, TA2 section AS19 recommended trim: TAB, TA ADM1 recommended trim: TAB, TA2 Community Design Registration No AS12 recommended trim: TAB, TA2 29 AK XT range AS11, ADM1, AS12 AKA, ADM2 and AK2 also available as XT profiles see page AKA recommended trim: TAB, TA2 For guidance on the use of ADM profiles see page AK recommended trim: TAB, TA ADM2 recommended trim: TAB, TA2 Community Design Registration No AK2 recommended trim: TAB, TA2 29 For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 27

21 traditional aluminium - A range A range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with resilient flooring Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. AS1 2. AS AS AS AR AR3 XT range AR81 also available as an XT profile see page AR colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 28

22 traditional aluminium - A range A range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with resilient flooring Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. AR 2. AR section AR AR AR7 not available curved Design Service see page 170. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 29

23 traditional aluminium - S range S range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with resilient flooring Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. SE1 3 8 SE1 recommended trim: TAB, TA SE2 recommended trim: TAB, TA SD1 recommended trim: TAB, TA SD2 recommended trim: TAB, TA2 Design Service see page SM colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 30

24 traditional aluminium - H range H range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. HD HE1 recommended trim: TAC, TA, TA section 1. HE2 recommended trim: TAC, TA, TA HD1 recommended trim: TAC, TA, TA HD2 recommended trim: TAC, TA, TA HM For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 31

25 traditional aluminium - G range G range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior 60 Gauge Profiles Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. 63 G 11 recommended trim: TAC, TA, TA2 27 G1 recommended trim: TAC, TA, TA2, TA0 G11 0 ADM3 recommended trim: TAC, TA, TA2, TA0 Community Design Registration No G12 recommended trim: TAC, TA, TA2 27 For guidance on the use of ADM profiles see page XT range G11, ADM3, G12, G1, ADM, and G2 also available as XT profiles see page 19. G1 recommended trim: TAC, TA, TA2 27 ADM recommended trim: TAC, TA, TA2 Community Design Registration No G2 recommended trim: TAC, TA, TA G recommended trim: TAC, TA, TA2 not available curved illustration shown at 7% of actual size Front insert should always be in a contrasting colour to the remaining inserts to ensure definition of the step edge. The remaining inserts must always be of the same colour and ideally match the surrounding floorcovering.

26 traditional aluminium - G range 3 71 PG PG2 G section 1 G G 36 1 Design Service see page G6 10 G colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent (except G6), Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 33

27 traditional aluminium - G range G range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. GR91 8 GR GR XT range GR81 also available as an XT profile see page 19. G GR91 not available curved GR colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 3

28 traditional aluminium - G range GR8 GR8 89 section G Design Service see page GR GR For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 3

29 traditional aluminium - CT range CT range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Mill finish aluminium Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with carpet, wood, ceramics and other heavy duty floorcoverings Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. CT CT71 recommended trim: TA, TA CT712 recommended trim: TA, TA2 33 Design Service see page CT7 recommended trim: TA, TA CT2 recommended trim: TA2 not available curved 31 colour availability Aluminium Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 36

30 traditional aluminium - CT range CA71 7 CT78 7 section Stair edging with integral nap trim for woven-back carpets. 7 CT CA71 not available curved CT For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 37

31 chrome contemporary design description A bright attractive finish offering a contemporary modern look. Comprises chromed aluminium channels with slip-resistant inserts (see page 1 for insert colours). For use in conjunction with floorcoverings from all major manufacturers. Suitable for light and medium traffic commercial applications. traditional stair edging Traditional Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing profile availability Gauge of profiles suitable for use with carpet and resilient floorcoverings (when used with a suitable bevelled underlay - see page 8). See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Available cut to finished length only Maximum continuous length 2m finishes / environment In addition to the profiles shown opposite, chrome finish is available in other aluminium stair edgings (except the XT range), subject to minimum order quantity/surcharge Choice of insert: Xtra-grip - for interior areas at risk from spillage or wet conditions e.g. stairways close to entrances or where safety flooring is used Xtra-grip Plus - features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments Interior (Standard and Grained) - suitable for use in internal dry conditions installation / cleaning & maintenance Guidelines can be found on page 160 to 161 services Technical Services Profiles can be fabricated Samples Measuring and templating Design Service 38

32 chrome Chrome range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Chrome finish aluminium Insert Xtra-grip, Xtra-grip Plus or Interior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. GC11 60 section 1 Design Service see page 170. GC11 recommended trim: TAC GC1 recommended trim: TAC GC GCR81 TC1 clip 3 TAC2 colour availability Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. For full details on Colour Availability see pages 1 to TAC2 is available as standard in 83 and 90 corners. Other angles available subject to minimum quantity/surcharge. Welded corners should be mitre finished during installation and not butt jointed. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 39

33 bronze prestigious locations description An extensive range of attractive and hardwearing stair edgings comprising bronze channels with slip-resistant inserts. For use with most floorcoverings. Provides an ideal finish for prestigious locations such as theatres, banks, hotels etc. Stair edgings help to achieve an inclusive environment in line with latest legislation and guidelines such as Approved Document M and BS8300 : 2009 (see pages 166 to 168). which stair edging? Traditional Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing Elite Concealed fixing eliminating the need for screw head cover plugs profile availability Gauge of profiles suitable for most floorcoverings. See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Choice of profile to suit traffic levels e.g. single or double channel finishes / environment Channels in polished manganese bronze. Use a proprietary metal polish to maintain polished finish or allow to oxidise naturally When specifying a double channel stair edging both inserts should be the same colour, and should be of a contrasting colour to the surrounding floor finish Choice of insert: Xtra-grip - for interior areas at risk from spillage or wet conditions e.g. stairways close to entrances or where safety flooring is used Xtra-grip Plus - features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments Interior (Standard, Grained and Elite) - suitable for use in internal dry conditions Exterior - suitable for everyday outdoor use, e.g. car parks, entry and exit steps to shopping centres etc. For extreme exterior conditions see Allite (pages 80 to 83) installation / cleaning & maintenance Guidelines can be found on page 160 to 161 services Technical Services Profiles can be fabricated Samples Measuring and templating Design Service 10 year warranty

34 elite bronze elite range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Polished manganese bronze Insert Interior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. ELB 11 0 ELB 11 recommended trim: BT2 section ELB 1 recommended trim: BT Elite stair edgings offer a secured insert with the benefit of a concealed mechanical fixing. 3 ELB ELB ELB ELB 727 not available curved 3 0 colour availability Bronze Channel: Supplied polished. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Elite Insert is supplied separately from the channel and must be specified separately. The final 2 digits in the profile code indicate the width of insert required. ELINS (mm), ELINS0 (0mm). For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 1

35 traditional bronze - BA range BA range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Polished manganese bronze Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge BAS20 is typically used with resilient flooring or where no surface floorcoverings are used Profiles 2-2.mm profiles are typically used with resilient flooring Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. BAR3 Ramp back profiles are suitable for use on steps where no surface floorcoverings are used. 72 When used with resilient flooring ramp back profiles should be installed on top of the floorcovering. BAS20 ramp back recommended trim: BT BAS11 recommended trim: BT BAKA recommended trim: BT2 29 Design Service see page BAR BAS BAS colour availability Bronze Channel: Supplied polished. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent (except BGR121), Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. Exterior Insert: Lignite, Nebula, Nightsky, Sunrise. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 2

36 traditional bronze - BG range BG range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Polished manganese bronze Insert Xtra-grip, Xtra-grip Plus, Interior or Exterior Gauge Typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. BG1 60 section 1 BG11 recommended trim: BT BG1 recommended trim: BT BG BGR For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 3

37 PVC-u hardnose - XT range the new edge in safety for stairs description The XT range offers the ultimate solution in reducing slips, trips and falls on stairs and has been developed in line with the latest legislation and guidelines such as Approved Document M, BS8300 : 2009 and BRE (see pages 166 to 169). The Gradus XT range comprises coloured PVC-u channels with a choice of matching slip-resistant inserts that extend around the leading edge of the stair edging to ensure that foot contact is always made with the slip-resistant element of the stair edging. XT range Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing specialist bond for additional strength extended insert design ensures maximum safety underfoot profile availability Gauge of profiles suitable for most floorcoverings. See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Choice of profile to suit traffic levels e.g. single or double channel finishes / environment Selecting the channel and insert in the same colour provides the ideal solution for creating a single solid band of colour, that contrasts with the surrounding floorcovering, to define the step edge in line with BS893 : 2008 (LRVs), BS8300 : 2009 and ADM 200 guidelines (see pages 16 to 168) When specifying a double channel stair edging both inserts should be the same colour and should be of a contrasting colour to the surrounding floor finish Choice of insert: Xtra-grip - for interior areas at risk from spillage or wet conditions e.g. stairways close to entrances or where safety flooring is used Xtra-grip Plus - features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments Interior (Standard) - suitable for use in internal dry conditions recess to accommodate floorcovering ensures secure fit of profile to step backing points help to hold floorcovering in place locking mechanism secures insert in place installation / cleaning & maintenance Guidelines can be found on page 160 to 161 services Technical Services Profiles can be fabricated Samples Measuring and templating Design Service 10 year warranty

38 XT range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel PVC-u Insert Xtra-grip, Xtra-grip Plus or Interior Gauge RXT3 are typically used with resilient flooring Profiles RXT and DDXT are typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. hardnose - satin finish - XT range visit: 3 RXT311 recommended trim: HXT2 Patent applied for - Application no Registered Community Design no RXT31 recommended trim: HXT section 1 RXT11 recommended trim: HXT2 RXT11 3 DDXT1 recommended trim: HXT2 81 RXT21 available June 2009 recommended trim: HXT2 0 3 RXT81 available June RXT1 recommended trim: HXT2 3 DDXT2 recommended trim: HXT2 81 RXT2 available June 2009 recommended trim: HXT2 colour availability Hardnose Channel: Black, Bluebell, Brown, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Snowdrift. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Buttercup, Canvas, Coffee, Evergreen, Glacier, Ink, Jet, Lead, Ocean, Snowdrift, Steel. For full details on Colour Availability see pages 1 to trims For recommended trims see individual profiles. For further information on associated trims see pages 7 and to 9. For further information on the XT range, including NBS specifications and CAD drawings, visit or contact Gradus Customer Support on

39 hardnose - satin finish - XT range XT range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel PVC-u Insert Xtra-grip, Xtra-grip Plus or Interior Gauge Typically used with carpet Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. Patent applied for - Application no Registered Community Design no RXT RXT711 recommended trim: HXT2 3 6 DDXT3 recommended trim: HXT RXT71 recommended trim: HXT2 3 6 DDXT recommended trim: HXT RXT781 available June colour availability Hardnose Channel: Black, Bluebell, Brown, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Snowdrift. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Buttercup, Canvas, Coffee, Evergreen, Glacier, Ink, Jet, Lead, Ocean, Snowdrift, Steel. For full details on Colour Availability see pages 1 to 1. trims For recommended trims see individual profiles. For further information on associated trims see pages 7 and to 9. 6

40 side trims and welded corners visit: Side trims and welded corners are designed to form a neat and attractive edge around the open end of a step by concealing the edge of the floorcovering and stair edging. Gradus side trim HT2 can be ordered in straight lengths for on-site fabrication or can be supplied as pre-formed welded corners HXT2. When ordered as HXT2 the apex of the welded corner is contoured to a 10mm radius to match the curved edge design of the XT stair edging profiles, providing a flush, neat finish. section 1 gauge 6mm 8mm 10mm TC1 clip adjusts to provide a 6mm, 8mm or 10mm up stand on the tread or riser (can be removed after curing) HXT2 HT2 PVC-u TC1 clip PVC-u welded corners & 90 Site Section Gauge LH or RH Universal Fixing Join HXT mm TC1 Clips butt colour availability HXT2: Black, Bluebell, Brown, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Snowdrift. For full details on Colour Availability see pages 1 to 1. For further information on the XT range, including NBS specifications and CAD drawings, visit or contact Gradus Customer Support on

41 PVC-u hardnose decorative colours and effects description Gradus Hardnose is an extensive range of attractive and hardwearing stair edgings comprising coloured PVC-u channels and matching slip-resistant inserts that can be used to complement any design scheme. Stair edgings help to achieve an inclusive environment in line with the latest legislation and guidelines such as Approved Document M, BS8300 : 2009 and BRE (see pages 166 to 169). A choice of Traditional channels is available in satin and metallic finish Hardnose. In addition, the DDA and RNRC profiles feature an extended insert design to provide additional slip-resistance around the leading edge of the stair edging. traditional stair edging profile availability Gauge of profiles suitable for most floorcoverings. See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Choice of profile to suit traffic levels e.g. single or double channel finishes / environment Selecting the channel and insert in the same colour provides the ideal solution for creating a single solid band of colour, that contrasts with the surrounding floorcovering, to define the step edge in line with BS893 : 2008 (LRVs), BS8300 : 2009 and ADM 200 guidelines (see pages 16 to 168) When specifying a double channel stair edging both inserts should be the same colour and should be of a contrasting colour to the surrounding floor finish Choice of insert: Xtra-grip - for interior areas at risk from spillage or wet conditions e.g. stairways close to entrances or where safety flooring is used Xtra-grip Plus - features all the benefits of Xtra-grip and utilises an enhanced insert bond system making it suitable for interior areas that require more frequent cleaning such as catering and food preparation environments Interior (Standard and Grained) - suitable for use in internal dry conditions 8 Traditional Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing installation / cleaning & maintenance Guidelines can be found on page 160 to 161 services Technical Services Profiles can be fabricated Samples Measuring and templating Design Service 10 year warranty

42 traditional hardnose - satin finish - dda + rnrc range dda + rnrc range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel PVC-u Insert Xtra-grip, Xtra-grip Plus or Interior Gauge RNRC is typically used with resilient flooring or where no surface floorcoverings are used Profiles DDA1 and DDA2 are typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas DDA3 and DDA are suitable for use with carpet Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. 71 RNRC11 section 1 RNRC11 recommended trim: HT38, HT2 Registered Community Design Application No Ramp back profiles are suitable for use on steps where no surface floorcoverings are used. When used with resilient flooring ramp back profiles should be installed on top of the floorcovering. DDA1 recommended trim: HT38, HT2 dda + rnrc Profiles These profiles feature an extended insert design to provide additional slip-resistance around the leading edge of the stair edging. This ensures that foot contact is always made with the slip-resistant element of the stair edging. Profiles are available with mm treads and mm or mm risers to meet ADM 200 and BS8300:2009 guidelines. Registered Community Design Application No.s to 000 DDA2 recommended trim: HT38, HT2 Registered Community Design Application No.s to DDA3 recommended trim: HT, HT2 Registered Community Design Application No.s to DDA recommended trim: HT, HT2 Registered Community Design Application No.s to colour availability Hardnose Channel - RNRC: Black, Buttercup, Glacier, Granite, Ink; DDA: Black, Bluebell, Brown, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Snowdrift. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. For full details on Colour Availability see pages 1 to 1. XT range For guidance on the use of DDA profiles see page 168. DDA1, DDA2, DDA3 and DDA also available as XT profiles see pages to 6. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 9

43 traditional hardnose - satin finish - rn range RN range For guidance on the correct selection of stair edgings see pages 10 to Channel Insert Gauge PVC-u Xtra-grip, Xtra-grip Plus or Interior RN3 are typically used with resilient flooring 3 RN311 recommended trim: HT38, HT2 Profiles RN are typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas RN7 are typically used with carpet Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice RN31 recommended trim: HT38, HT RN11 recommended trim: HT38, HT RN781 RN1 recommended trim: HT38, HT RN RN XT range RN311, RN31, RN11, RN1, RN81, RN711, RN71 and RN781 also available as XT profiles see pages to 6. RN711 recommended trim: HT, HT RN71 recommended trim: HT, HT RN RN727 colour availability Hardnose Channel: Alpine, Black, Bluebell, Brown, Burgundy, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Lavender, Linen, Midnight, Nutmeg, Sage, Snowdrift, Storm, Veranda. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. For full details on Colour Availability see pages 1 to trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. 0

44 traditional hardnose - metallic finish - MR range MR range For guidance on the correct selection of stair edgings see pages 10 to 13. Channel PVC-u Insert Xtra-grip, Xtra-grip Plus or Interior Gauge MR are typically used with carpet or resilient flooring with bevelled underlay (see page 8) in heavy use areas MR7 are typically used with carpet Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. MR711 MR11 recommended trim: MT2 60 section MR1 recommended trim: MT MR Design Service see page MR711 recommended trim: MT MR71 recommended trim: MT MR781 colour availability Metallic Hardnose Channel: Burnt Almond, Doubloon, Silver, Zinc. Xtra-grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapour, Zest. Xtra-grip Plus: Bone, Cliff, Conker, Diamond, Forest, Lunar, Marl, Navy, Raven, Shark, Sulphur. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent, Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert - Grained: Black, Bluebell, Brown, Dove, Granite. For full details on Colour Availability see pages 1 to trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 1

45 flexible pvc for light traffic description A range of one-piece slip-resistant stair edgings recommended for use on escape stairs and in other light traffic areas. one-piece stair edging profile availability Gauge of profiles suitable for resilient floorcoverings. See page 62 for recommended stair edging to suit floorcovering Profile designs available to accommodate most stair shapes Supplied in 2.7m and 3.20m stock lengths finishes / environment Pvc channels suitable for light traffic interior use Available in choice of colours One-piece slip-resistant pvc stair edging for light traffic use, cut to size on site and fixed with adhesive installation / cleaning & maintenance Guidelines can be found on page 160 to 161 services Technical Services Samples Design Service 2

46 flexible pvc flexible pvc For guidance on the correct selection of stair edgings see pages 10 to 13. Channel Pvc (matt) Gauge Recommended for light traffic, e.g. escape stairs Typically used with resilient floorings Profiles Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. PKS PKS0 recommended trim: TP section 1 Design Service see page 170. PKS7 recommended trim: TP PK0 recommended trim: TP PK7 recommended trim: TP PM60 recommended trim: TP PR PR PR colour availability Flexible pvc: Black, Brown, Dove, Granite, Snowdrift. For full details on Colour Availability see page 1. trims For recommended trims see individual profiles. For further information on associated trims see pages to 9. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 3

47 guide to stair trims & welded corners description Welded corners are designed to form a neat and attractive edge around the open end of a step by concealing the edge of the floorcovering and stair edging. Welded corners are supplied pre-welded to suit the angle between the riser and tread of the step (78-90 ). They are available in a variety of gauges to suit different floorcoverings. Welded corners are available with either a fixed flange or separate fixing clips as shown on the opposite page. When selecting the appropriate welded corner the thickness of the screed, the floorcovering and the combined thickness of the stair edging riser and floorcovering must be considered to ensure a neat finish. Profiles are also available in longer lengths to be used as trimming strips on landings etc. In addition to welded corners a range of specialist stair trims can be found on the following pages (6 to 9). D XT range For details on XT side trims and welded corners refer to page 20 (Aluminium) and page 7 (PVC-u Hardnose). A B C D nap trim Aluminium or bronze nap trims (see page 9) available with or without carpet gripper, butt joint to the back edge of the stair edging to form a neat finish to the floorcovering. Ideal for use with Axminster or other woven backed carpets. The top is closed using a block of wood and a rubber mallet. Fixed with screws and adhesive. mitre joint Welded corners with TC2 clips must be mitred. TAC2 should also be mitred. type of jointing butt joint Two adjoining welded corners can be butt jointed for all corners with TC1 clips and fixed tabs. note To achieve an optimum finish the angle between each riser and tread should be the same. Remedial work may need to be undertaken prior to installation to achieve this.

48 TAB to suit up to 3.mm resilient floorcoverings 3 designs to choose from welded corner with fixed flange (page 6) Welded corners are fabricated using a trimming strip of the correct gauge to suit the thickness of the floorcovering. Different types of trimming strip can be combined on the tread and riser to accommodate the combined thickness of the floorcovering and riser of the stair edging e.g. TAB (tread)/ta (riser). Welded corners are fixed with a proprietary cartridge adhesive. Note: the use of a latex screed to disguise the fixing flange may be required when using vinyl or linoleum. A gauge welded corner with TC1 clips (page 7) HT2, HXT2, MT2, TA2, TAC2 and TAXT2 all use the TC1 clip which is adjustable to provide an upstand of 6mm, 8mm or 10mm on the tread or riser. The clip is positioned in one of the grooves using two clips per tread and one per riser and the side trim is then fixed on with proprietary cartridge adhesive. When this has cured the clip is removed. Different clip positions can be used on the tread and riser to allow for the combined thickness of the floorcovering and riser of the stair edging. B TA to suit up to 6.0mm (combined thickness of resilient floorcovering and stair edging riser) Fixed Flange gauge 6mm 8mm 10mm TC1 C welded corner with TC2 clips (page 7) TA0, TA66 and BT2 all use the TC2 clip which is made from spring steel and is used in approximately the same positions as TC1 but is left in position after the proprietary cartridge adhesive cures. gauge TC2 Surveying Service Gradus Accessories offers a free measuring and templating service to ensure optimum product selection. For further details see page 60. (Terms and conditions apply) For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests

49 stair trims welded corners and trimming strips with fixed flange TA gauge Stock & 90 Fixed Site Section Gauge Lengths LH or RH Universal Tabs Join TA1 2.mm 2.7m TA2C mm 2.7m TA 6.mm 2.7m butt TAB* 3.mm 2.7m butt TAC mm 2.7m butt TP mm 2.7m butt *TAB can be supplied as TAXTB - a pre-formed welded corner with a 10mm radius to complement the curved edge design of the XT stair edging profiles (see page 20). TA2C Aluminium 2 TA1 Aluminium TA Aluminium 6. TAB Aluminium 3. TAC Aluminium TP pvc HT38 PVC-u HT PVC-u colour availability Flexible pvc (TP): Black, Brown, Dove, Granite, Snowdrift. PVC-u (HT): Alpine, Black, Bluebell, Brown, Burgundy, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Lavender, Linen, Midnight, Nutmeg, Sage, Snowdrift, Storm, Veranda. HXT2: Black, Bluebell, Brown, Buttercup, Canvas, Dove, Evergreen, Glacier, Granite, Ink, Snowdrift. Metallic PVC-u (MT): Burnt Almond, Doubloon, Silver, Zinc. For full details on Colour Availability see page 1. 6

50 stair trims welded corners and trimming strips with TC1 clips HT2 Stock & 90 Fixing Site Section Gauge Lengths LH or RH Universal Clips Join HT2* mm 2.7m TC1 butt MT mm 2.7m TC1 butt TA2** mm 2.7m TC1 butt TAC mm 2.00m TC1 mitre gauge 6mm 8mm 10mm *HT2 can be supplied as HXT2 - a pre-formed welded corner with a 10mm radius to complement the curved edge design of the XT stair edging profiles (see page 7). **TA2 can be supplied as TAXT2 - a pre-formed welded corner with a 10mm radius to complement the curved edge design of the XT stair edging profiles (see page 20). section HT2 PVC-u MT2 PVC-u Metallic TA2 Aluminium TAC2 Chrome Finish Aluminium 1 TC1 clip PVC-u welded corners and trimming strips with TC2 clips BT2 Stock Fixing Site Section Gauge Lengths LH or RH Clips Join BT2 10mm 2.7m TC2 mitre TA0 7mm 2.7m TC2 mitre TA66 7mm 2.7m TC2 mitre gauge TA66 Aluminium BT2 Bronze TA0 Aluminium TC2 clip Steel Profiles: Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 7

51 stair trims edge trim TA9 TA9 is an aluminium trimming strip used with G range stair edgings to form a safe ramp where resilient or no floorcovering is used. TA9 Aluminium 37 Diagram shows G11 with TA9 ramping strip providing a transition where no floorcovering is used. TA6 is an aluminium trimming strip used to form a central run of resilient floorcovering on stairs and landings. Can also be used on the riser. TA6 Aluminium Diagram shows AS11 and TA6 trimming strip with a special on-site fabrication. bevelled underlay BU 200 Bevelled underlay is a flexible pvc material used as a diminishing strip and is ideal for building up resilient floorcoverings for use with mm stair edgings. This is an ideal solution where a heavy-duty stair edging is required with a resilient floorcovering. Grooves along the length of the underlay provide a straight cutting edge at points where the thickness gives ideal height adjustment. Bevelled underlay is fitted with a proprietary contact adhesive and it is advisable to feather the tapered edge with a thin layer of latex cement. Diagram shows BU200 bevelled underlay being used to build up a 3.2mm linoleum to ensure a flush finish with the back edge of a G11 stair edging (mm gauge). BU 800 contains up to 0% recycled content. 2 BU 200 pvc 6 BU 800 pvc colour availability BU: Black. For full details on Colour Availability see page 118. Profiles: Dimensions shown are nominal. Illustrations are full size in mm. Products subject to minor design alterations without notice. 8

52 stair trims nap trim BCT16 BCT16 Bronze - available with or without carpet gripper Aluminium or bronze nap trims available with or without carpet gripper. Butt joint to the back edge of the stair edging to form a neat finish to the floorcovering. Ideal for use where an Axminster or other woven backed carpet is used. The top is closed using a block of wood and/or rubber mallet. Fixed with screws and adhesive. 6 3 Diagram shows BCT16 butt jointed to the back edge of BG11 (mm gauge - see page 3) stair edging to provide a neat edge to the carpet. section 1 ANT3 Aluminium - available with or without carpet gripper 36 Design Service see page 170. Diagram shows ANT3 butt jointed to the back edge of G11 (mm gauge - see page ) stair edging to provide a neat edge to the carpet. CG102 Aluminium - available with or without carpet gripper 8 Diagram shows CG102 butt jointed to the back edge of CT71 (gauge 7mm - see page 36) stair edging to provide a neat edge to the carpet. square edge PET276 PET276 Co-extruded pvc top with PVC-u base A co-extruded PVC-u feature strip for use between carpets, resilient floorcoverings and ceramic tiles or to form an edge to a floorcovering (see diagram) colour availability PET: Black, Brown, Dove, Granite. For full details on Colour Availability see page 118. Diagram shows PET276 in conjunction with RN711 with a special on-site fabrication being used to protect the exposed edge of the carpet and form a carpet runner. For further information visit or contact Gradus Customer Support on for product and technical enquiries or sample requests 9