(1:4) Heavy Duty, (1:9) ph Balancing (1:20) All Purpose Cleaner. (Power Cleaner: Water) Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum

Transcription

1 POWER CLEANER Power Cleaner is a highly concentrated, commercial strength cleaner, degreaser, and wax remover for commercial and industrial use. Power Cleaner has been formulated with a distinct blend of water softening agents and nonionic surfactants that allow you to clean and dissolve the toughest grease /oil stains from almost any surface, including concrete. Power Cleaner works by penetrating, suspending, emulsifying, and dissolving surface contaminants. This remarkable product is so versatile it can be used to clean everything from degreasing the dirtiest substrate to removing oil stains and/or wax from commercial and industrial surfaces. Concrete Surfaces Ceramic Tile and grout Natural and cultured stone Commercial P ool Decks Wal kways Driv eways Thinning Proficient industrial wax remover Effectively degreases commercial kitchens Removes tar, tire marks, and gum from most surfaces 100% Biodegradable Can be safely used in confined areas 2 Hours (1:4) Heavy Duty, (1:9) ph Balancing (1:20) All Purpose Cleaner. (Power Cleaner: ) Pink Degreaser Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum (1:4) Heavy Duty (1:9) ph Balancing (1:20) All Purpose Cleaner (Removal of Substances) Brake Fluid Wax

2 NU-LIFT CLEANER Nu-Lift Cleaner is a formulated with an environmentally-responsible mineral acid that is user friendly. Nu-Lift Cleaner does exactly what its name implies it lifts out and removes dirt, alkalinity, efflorescence, hard water deposits, magnesium, and stains from surfaces like grout, natural stone, and concrete without harming or discoloring the surface. Concrete Surfaces Masonry Surfaces Natural and cultured stone Grout Commercial: Pool Decks Walkways Driveways Thinning Removes Organic Deposits Balances low ph Safely dissolves Efflorescence Magnesium Lime deposits Soap scum 100% Biodegradable Can be safely used in confined areas 2 Hours (1:1) For Standard Usage (Nu Lift Cleaner: ) Blue Mineral Acid (1:1) For Standard Usage (Removal of Substances) Brake Fluid Stains Lime Deposits Efflorescence Fair Fair Fair

3 STONE SOAP Stone Soap is a highly concentrated, heavy duty cleaner formulated for cleaning without harming finished surfaces. Stone Soap is a 100% biodegradable product which does not need to be rinsed off. Stone Soap is a user friendly, environmentally-responsible product that is excellent for cleaning any surface. Pre Stain System Existing Concrete or Sealers Ceramic Tile & Grout Natural Stone User Friendly Equally effective in hard or soft water Neutral ph Cleaner 100% Biodegradable Can be safely used in confined areas Thinning (1:10) Heavy Duty (1:20) For Standard Usage (Stone Soap : ) Green Industrial Cleaner (1:10) Heavy Duty (1:20) For Standard Usage (Removal of Substances on a SEMCO Finished Surface) Brake Fluid Stains Lime Deposits Efflorescence Fair

4 X-BOND SYSTEM SEMCO's innovative X-Bond is a waterproof, lightweight, cementatious product that virtually resurfaces any surface. The X-Bond system offers the ultimate in durable, environmentally responsible creative design capability. This superior bonding system adheres directly to any existing surface. X-Bond can be safely applied in confined areas over existing surfaces minimizing waste disposal. Unlimited texture possibilities allow for complete creative freedom. This durable, waterproof system is designed for both interior, exterior and below grade use. Concrete Surfaces Coated Surfaces Ceramic Tile Wood Surfaces / Decks Vinyl / VCT Surfaces Natural Stone Metal Glass proof cemetatious system Minimizes Waste Disposal Interior, Exterior, and Below Grade Durable for Floors, Walls, and Countertops Can be safely used in confined areas UV Resistant Resistant to Freeze-Thaw Damage *Available in Integral s 2-8 Hours - dependant upon thickness applied 24 Hours White Powder & White Liquid / or ed Liquid Modified Acrylic / Modified Polymer Cement Mineral Sprits, Xylene, or Toulene Liquid = 1 Gallon or 5 Gallon Pail / Stone = 50 lb bag Coverage (sq. ft. 2 per gallons & a 50lb. bag, coverage is based on 1/8 inch application) Existing Concrete Drywall, Cement Board Ceramic Tile Vinyl Tile or FRP Natural Stone Metal Brake Fluid

5 PRE STAIN SEMCO's unique Pre-Stain is a water-based chemical bonding compound that provides rich, lasting color on exterior, interior and below grade concrete & X-BOND surfaces. This Environmentally-Responsible system creates lasting surface colors. Unique color reactions provide unlimited, vivid, one-of-a-kind visual designs. Artistry and practicality combine to create beautiful and functional applications. Unsealed concrete surfaces Exposed concrete Warehouse Floors Vertical, Horizontal, and Below Grade Surfaces Countertops Provides a one-of-a-kind Natural Effect UV Resistant Leaves a natural look Odorless Meets & Exceeds indoor air quality specifications, VOC Compliant Resistant to Freeze-Thaw Damage 1-4 Hours 8 Hours Dependent upon Selected Base Stain Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Existing or Cured Concrete Countertop Stamped Concrete

6 X-CRETE 400 Sealer X-Crete 400 is formulated with the latest technology in polyurethane blend resin to provide the most environmentally-responsible, water-based sealer available in today s market. X-Crete 400 is a high quality, multi-faceted product. It dries clear, creating a gloss look as it simultaneously seals, dust proofs, and protects. X-Crete 400 is a unique, one-of-a-kind gloss finish topcoat, which provides a durable barrier resistant to stains and chemicals while providing a polished look for exterior and interior use. It's low V.O.C.'s properties meet CA state laws. Pre Stain System Concrete Surfaces Countertops Stamped Concrete Pool Decks Withstands Commercial foot and vehicle traffic Enhances Resistant to chemicals Self-Priming, Sealer & Hardener *Also Available in Matte Finish *Also Available with a Non-Skid Additive 4-8 Hours (higher temperatures increase dry times) White / Milky Liquid / Dries clear Base Resins if uncured / solvent if cured Existing Concrete Pre Stain System Countertop Stamped Concrete *Review SEMCO Top Coat Application Procedure prior to use

7 CRYSTAL COAT Crystal Coat is formulated with the latest water-based technology in latex polymers, and is able to link to most top coats. Crystal Coat provides a quick drying, environmentally-responsible, durability and shine, for interior and exterior use. Crystal Coat is a quality, multi-faceted product which dries clear creating a deep gloss finish, as it simultaneously seals and protects. Crystal Coat provides a durable barrier, resistant to stains and high foot traffic. Can Be Applied Over: Pre Stain System *SEMCO Sealers Most Sealed Surfaces Stamped Concrete Existing Crystal Coat *Resistant to chemicals Withstands heavy foot traffic Interior and Exterior Use Easy to Maintain *Also Available in Matte Finish *Also Available with a Non-Skid Additive 30 Minutes - 1 Hour White / Milky Liquid - dries clear Base Arcylic or (4:1) Power Cleaner for removal Sealed Concrete Existing Crystal Coat (recoat) Stamped Concrete

8 X-CRETE 500 X-Crete 500 is an exceptional waterproofing sealer that excels under the most demanding circumstances. X-Crete 500 s low molecular weight allows for excellent penetration. X-Crete 500 fills into the pores of the substrate, in which chemical reaction follows, that creates a solid, but breathable membrane. X-Crete 500 provides long lasting protection for a vast array of surfaces in which it leaves a natural finish. Existing Concrete Pre Stain System Ceramic Tile Stucco Slump Block Block Wall / Split face CMU Tilt Up Wall Pourus Natural Stone Thinning Penetration Can be applied on damp surfaces Highly alkaline resistance Effective against freeze-thaw damage Unaffected by ultra-violet rays Increases life of mortar, tiles, stucco, brick & natural stone Anti Graffiti 2 Hours Not Recommended Clear Silane & Siloxanne Mineral Sprits 1 Gal. Pail, 5 Gal. Pail, 55 Gal. Drum Concrete X-Bond Tilt-up wall Plaster Cinder Block / CMU Stucco

9 XCEL Xcel is an exceptional waterproofing sealer designed for specifically for natural stone. Xcel s low molecular weight allows for excellent penetration. Xcel fills into the pores of the substrate, in which the chemical reaction that follows creates a solid, but breathable membrane. Xcel provides long lasting protection for a vast array of surfaces over which it leaves a natural finish. Existing Concrete Pre Stain System Non Glazed Ceramic Tile Stucco Slate, Flagstone, ect. Block Walls / CMU Porous Natural Stone Thinning Penetration Can be applied on damp surfaces Highly alkaline resistant Effective against freeze-thaw damage Unaffected by ultra-violet rays Increase life of mortar, tiles, stucco, brick & natural stone 2 Hours Not Recommended Clear Industrial Silane & Siloxanne Mineral Sprits Travertine Granite Limestone Slate Brake Fluid Lacquer Thinner Fair Poor

10 XTRA GLOSS Xtra Gloss is a one-part solvent-based polyurethane sealer, able to provide exceptional durability and shine for interior, exterior, and below grade use. Xtra Gloss is a high quality, multi-faceted product: which dries clear, creating a wet look, as it simultaneously seals, dustproofs, and protects for long lasting durability. Xtra Gloss is a unique, high-gloss top coat which provides superior and durable resistance to stains, many chemicals and vehicle traffic. Pre Stain System New & Existing Concrete Commercial Driveways Vertical Surfaces Warehouse Floors New & Existing Stamped Concrete Thinning Withstands commercial foot & vehicle traffic For Interior, Exterior, and Below Grade applications *Resistant to chemicals Rejuvenates Deep Gloss Finish *Also Available with a Non-Skid Additive 30 Minutes - 2 Hours (cooler temps may exceed this) 48 Hours Not Recommended (consult a SEMCO rep.) Clear Solvent Base Resins Xylene Concrete X-Bond Cinder Block or Natural Stone

11 COLOUR COAT Colour Coat is an Environmentally-Responsible product, formulated with the latest water-based technologies. Colour Coat a polyurethane product, which is designed to withstand heavy foot traffic, while maintaining a gloss or matte finish. With its temperature reducing properties, up to 25 degrees Fahrenheit, it is optimal for pool decks and other barefoot surfaces. Colour Coat is a sealer, primer and hardener all-in-one. Concrete Surfaces Coated or Sealed Surfaces Pool Decks Garage Floors For Interior & Exterior Use Sealer, Primer, and Hardener all-in-one Withstands heavy foot traffic Reduces Surface Temperature Resistant to many chemicals High alkaline & salt resistance *Also Available in Matte Finish 8 Hours White / Milky Liquid / Available in over 1,000 colors Base Polyurethane or Xylene if cured Sealed Concrete Countertops Stamped Concrete

12 X-CRETE 800 Concrete Curing Compound SEMCO's unique X-Crete 800 Cure is a water-based chemical bonding compound that provides the most environmentally-responsible system for curing and hardening new concrete surfaces. Meets or exceeds ASTM specification C-308, C-309, and AASHTO 148 Type I. On fresh concrete it restricts the hydration of water assuring that it reaches maximum hardness. Unsealed concrete surfaces Exposed concrete Warehouse Floors Vertical, Horizontal, and Below Grade Surfaces Countertops Provides a one-of-a-kind Natural Effect UV Resistant Leaves a natural look Odorless Meets & Exceeds indoor air quality specifications, VOC Compliant Resistant to Freeze-Thaw Damage 2 Hours 8 Hours Milky white, dries clear Base Stain Stripping Agent or SEMCO Power Cleaner Existing Concrete Countertop Stamped Concrete