CONNECTRIX RACK PANELS

Transcription

1 CONNECTRIX RACK PANELS STOCK CONNECTRIX ALUMINUM RACK PANELS The Connectrix system expands connectivity electro-static applied, oven cured black simi-gloss possibilities utilizing a new panel cutout detail and powder coat. Engraving the standard blank is fast an array of standard and new isolated connectors. and easily accomplished on a separate dedicated This system provides more connectors and mounting options in stock standard ACE panels. The panels show bright aluminum in the engraved CNC engraving routing machine. The finished benefit is faster order turn around and lower cost. characters and need not be back filled. Less custom fabrication for custom spec results The Connectrix system connectors combine with off-the-shelf stock prices. popular mounting pattern of the Neurtrik D The Connectrix system rack panels are flat and series and Switchcraft E series connectors with strong. Made from high strength aluminum alloy a generous rectangular cutout that mates with (6061-T6) that is.125 thick, they are ridged like a growing array of adapter-mounted standard the typical thinner mild steel panels. Because they connectors. The adapter mount is plastic and are CNC rotary machined and not punched they provides ground isolation between the panel and stay flat and undistorted unlike punched panels connector. On the connectrix system panel it is which distort in the punching process. These possible to mount any combination of modular panels are made and stocked in an assortment of jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic standard 19 rack panels. jacks, speaker jacks and numerous other standard The Connectrix system panels are easily engraved. The strong flat aluminum system panels Pages 20-21). Connectors are loaded with black connectors without a single custom punch (See are cut in array of different connector layout aluminum pop rivets. patterns. Each standard blank is finished with Connectrix Rack Panel Model Numbers MODEL # DESCRIPTION #RPL Single Space Rack Mount Panel, Blank - 19 W x 1-3/4 H #RPL Single Space Rack Mount Panel Machined for 10 Connectrix Mounts #RPL Two Space Rack Mount Panel, Blank - 19 W x 3-1/2 H #RPL Two Space Rack Mount Panel Machined for 30 Connectrix Mounts #RPL Three Space Rack Mount Panel, Blank - 19 W x 5-1/4 H #RPL Three Space Rack Mount Panel Machined for 45 Connectrix Mounts.133 DIA HOLE 2 PLCS CONNECTRIX CUTOUT R (2 PLCS) LOCATE CTR STOCK CONNECTRIX ALUMINUM RACK PANEL SPECIFICATIONS 19.00" #RPL ".800" ".75" 1.50" 1.50" 1.50" 1.50" 1.50" 1.50" 1.50" 1.50" 2.75" 2.75" 9.50" 19.00" #RPL-230 MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semigloss powder coat FABRICATION: CNC Rotary Machined, Engraved CONNECTRIX RACK PANEL 3.50" 1.625".800" " 1.66" 9.50" #RPL " 5.25" 1.625" Custom Connectrix #RPL-345 Rack Panel fully populated with custom Connectrix connectors and custom engraving. Call for more info on our custom Rack Panels ".800" " 1.66" 9.50" See page 36 for Pocket Panel Connector Loading & Engraving Form See page 37 for Rack Panel Connector Loading & Engraving Form See page 38 for Wall Panel Connector Loading & Engraving Form STOCK CONNECTRIX ALUMINUM RACK PANEL POSITION REFERENCE NUMBERS MIC-1 MIC-9 MIC-1 MIC-9 MIC-1 MIC-2 MIC-3 MIC-4 MIC-5 MIC-2 MIC-3 MIC-4 MIC-5 MIC-6 MIC-7 MIC-8 MIC-10 MIC-11 MIC-12 MIC-13 MIC-14 MIC-15 MIC-16 MIC-2 MIC-3 MIC-4 MIC-5 MIC-6 MIC-7 MIC-8 MIC-10 MIC-11 MIC-12 MIC-13 MIC-14 MIC-15 MIC-16 MIC-6 MIC-7 MIC-8 AUX-1 AUX-2 AUX-3 AUX-4 SEND-1 SEND-2 SEND-3 SEND-4 AUX-1 AUX-2 AUX-3 AUX-4 SEND-1 SEND-2 SEND-3 SEND-4 AUX-1 AUX-2 Stock aluminum #RPL-100, #RPL-200, and #RPL- 300 Series Rack Panels are CNC rotary machined to hold 10, 30, and 45 Connectrix connectors. These panels are excellent switching panels when populated with #C Rocker Switches (see page 22). Position reference numbers 1-10, 1-30, and 1-45 identify standard CNC rotary machined positions. MIC-9 MIC-17 MIC-18 MIC-19 MIC-20 MIC-21 MIC-22 MIC-23 MIC-24 SEND-5 SEND-6 SEND-7 SEND #RPL-110, #RPL-230 and #RPL-345 illustrated with Position Reference Numbers #RPL-110, #RPL-230 and #RPL-345 illustrated with Connectrix connectors installed and custom engraving 25

2 CONNECTRIX WALL PANELS STOCK CONNECTRIX ALUMINUM WALL PANELS The Connectrix system expands connectivity nectrix system wall panels are easily engraved. possibilities utilizing a new panel cutout detail The strong flat aluminum system panels are cut and an array of standard and new isolated connectors. This system provides more connectors and Each standard blank is finished with electro-static in array of different connector layout patterns. mounting options in stock standard ACE panels. applied, oven cured black or white simi-gloss The benefit is faster order turn around and lower powder coat. Engraving the standard blank is fast cost. Less custom fabrication with custom spec and easily accomplished on a separate dedicated results for off-the-shelf stock prices. CNC engraving routing machine. Each wall panel The Connectrix system wall panels are flat is supplied with #6 screws. Optional connector and strong. Made from high strength aluminum loading and engraving is available, see pages alloy (6061-T6) that is.062 thick. The Con- and 27 for details. STOCK CONNECTRIX ALUMINUM WALL PANELS #WP-100 #WP-200 #WP-300 #WP-400 #WP-101 #WP-204 #WP-306 #WP-408 Connectrix Wall Panel Model Numbers MODEL # DESCRIPTION Stock Connectrix Aluminum Wall Panels, Black Finish #WP Single Gang Wall Panel Blank, 4-1/2 H x 2-3/4 W #WP Double Gang Wall Panel Blank, 4-1/2 H x 4-9/16 W #WP Triple Gang Wall Panel Blank, 4-1/2 H x 6-3/8 W #WP Four Gang Wall Panel Blank, 4-1/2 H x 8-3/16 W #WP Six Gang Wall Panel Blank, 4-1/2 H x 11-13/16 W #WP Single Gang Wall Panel Machined 1 Connectrix Cutout #WP Single Gang Wall Panel Machined 2 Connectrix Cutouts #WP Double Gang Wall Panel Machined 4 Connectrix Cutouts #WP Double Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 16 Connectrix Cutouts Stock Connectrix Aluminum Wall Panels, White Finish #WP Single Gang Wall Panel Blank, 4-1/2 H x 2-3/4 W #WP Double Gang Wall Panel Blank, 4-1/2 H x 4-9/16 W #WP Triple Gang Wall Panel Blank, 4-1/2 H x 6-3/8 W #WP Four Gang Wall Panel Blank, 4-1/2 H x 8-3/16 W #WP Six Gang Wall Panel Blank, 4-1/2 H x 11-13/16 W #WP Single Gang Wall Panel Machined 1 Connectrix Cutout #WP Single Gang Wall Panel Machined 2 Connectrix Cutouts #WP Double Gang Wall Panel Machined 4 Connectrix Cutouts #WP Double Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 16 Connectrix Cutouts WALL PANEL EXAMPLE #WP-102 #WP-206 #WP-308 #WP-4012 #WP-600 #WP-6012 #WP-6016 MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black or white semi-gloss powder coat FABRICATION: CNC Rotary Machined, Engraved See Page 35 for a Wall Panel Connector Loading & Engraving Form Custom Connectrix #WP-318 Wall Panel with white powder coat finish, custom engraving, and custom connectors including a female HD 15-Pin connector (#C-26104) utilizing break out connector positions 7 and 8. STOCK STEEL WALL BOXES Wall Boxes made from.074 (1/16 ) thick steel and finished with a gray, heat-set enamel. Standard Electrical Conduit combination knock-outs located on all 4 sides. Note: Custom wall panels are available. Wall Boxes at right DO NOT accommodate the Wall Panels listed above. WALL BOXES #WB8x8x4 #WB10x10x4 #WB12x12x4 Wall Box Model Numbers MODEL # DESCRIPTION Aluminum Wall Boxes, Gray Finish #WB8x8x4...Wall Box w/ Knockouts - 08 W x 08 L x 4 D #WB10x10x4...Wall Box w/ Knockouts - 10 W x 10 L x 4 D #WB12x12x4...Wall Box w/ Knockouts - 12 W x 12 L x 4 D MATERIAL: 14 Gauge Sheet Steel,.074 (1/16 ) thick FINISH: Sprayed on heat-set gray enamel FABRICATION: Precision die formed and welded 26

3 CONNECTRIX PANEL LOADING AND ENGRAVING CUSTOM CONNECTRIX PANEL CONNECTOR LOADING AND ENGRAVING The Standard Blank Connectrix Panel Template fashion. When ordering, please be sure to include has 6 positions that mark the standard connector the model number of the Connector, the centers for either Connectrix and/or Switchcraft type and model number of the Pocket Panel, connector layouts. Using the example and the type and model number of the Stage illustrated at right, custom Connectrix connector Pocket the specified Connectrix panels will panels may be easily designed and produced, be loaded into. allowing the panels to be shipped in a timely CONNECTRIX PANEL ENGRAVING SPECIFICATIONS Ace s Connectrix Panel Engraving Specifications are as follows: Character Height Maximum: 1/8 (9 point type) Font: Single Stroke Stick Character Text Font Alignment: Centered above component Number of Characters: 8 (including spaces) Panel Materials Ace will engrave: Acrylic Sheet, Aluminum, Plastic Laminants Backfill Characters: Optional extra using enamel or acrylic paint Connector Loading: Black aluminum pop rivets CONNECTRIX PANEL CONNECTOR LOADING AND ENGRAVING EXAMPLE Custom Connectrix #PNL-106 panel with (6) #C connectors and custom engraving. The above form should be filled out completely to avoid any delays in custom panel designs. #MP-100 SERIES MINI POCKET CONNECTRIX PANELS Stock #MP-100 Series Mini Pocket Panels can be customed machined to hold 1 or 2 Connectrix connectors. Position reference numbers 1 and 2 identify standard machined positions. #MP-102 #PNL-100 SERIES HALF POCKET CONNECTRIX PANELS Stock #PNL-100 Series Half Pocket Panels can be customed machined to hold 1 to 6 Connectrix connectors. Position reference numbers 1 through 6 identify standard machined positions. #PNL Pocket Model # #123SLBK Panel Model # #PNL-106 Connector Model # Engraved Text #1 #C #1 MIC 19 #2 #C #2 MIC 20 #3 #C #3 MIC 21 #4 #C #4 MIC 22 #5 #C #5 MIC 23 #6 #C #6 MIC 24 #PNL-120 SERIES FULL POCKET CONNECTRIX PANELS Stock #PNL-120 Series Full Pocket Panels can be customed machined to hold 1 to 12 Connectrix connectors. Position reference numbers 1 through 12 identify standard machined positions. #PNL CONNECTRIX PANEL TEMPLATE #PNL-140 SERIES SUPER POCKET CONNECTRIX PANELS Stock #PNL-140 Series Super Pocket Panels can be customed machined to hold 1 to 25 Connectrix connectors. Position reference numbers 1 through 25 identify standard machined positions. Note: Super Pocket center Break- Out bar must be removed to use #PNL-1425 panel (see page 18). #PNL DIA HOLE (4) PLACES PANEL MATERIAL SPECIFICATIONS MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semi-gloss powder coat FABRICATION: CNC Rotary Machined, Engraved 27

4 POCKET PANEL CONNECTOR LOADING & ENGRAVING FORM #025 MINI POCKET MODEL #: #MP-100 SERIES PANEL MODEL #(S): #MP-100 SERIES PANEL NAME(S): A CONNECTOR ENGRAVE B CONNECTOR ENGRAVE #123 HALF POCKET MODEL #(S): #PNL-100 SERIES PANEL MODEL #(S): #PNL-100 SERIES PANEL NAME(S): A CONNECTOR ENGRAVE B CONNECTOR ENGRAVE #122 FULL POCKET MODEL #(S): #PNL-100/120 SERIES PANEL MODEL #(S): #PNL-100/120 SERIES PANEL NAME(S): A CONNECTOR ENGRAVE B CONNECTOR ENGRAVE #124 DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PANEL MODEL #(S): #PNL-100/120/140 SERIES PANEL NAME(S): A CONNECTOR ENGRAVE C CONNECTOR ENGRAVE B CONNECTOR ENGRAVE D CONNECTOR ENGRAVE #132 SUPER POCKET MODEL #: #PNL-100/120/140 SERIES PANEL MODEL #(S): #PNL-100/120/140 SERIES PANEL NAME(S): A CONNECTOR ENGRAVE C CONNECTOR ENGRAVE B CONNECTOR ENGRAVE D CONNECTOR ENGRAVE #134 SUPER DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PANEL MODEL #(S): #PNL-100/120/140 SERIES PANEL NAME(S): A CONNECTOR ENGRAVE E CONNECTOR ENGRAVE B CONNECTOR ENGRAVE F CONNECTOR ENGRAVE C CONNECTOR ENGRAVE G CONNECTOR ENGRAVE D CONNECTOR ENGRAVE H CONNECTOR ENVGRAVE

5 CUSTOM PANEL MATERIALS AND SPECIFICATIONS CUSTOM PANEL MATERIALS AND SPECIFICATIONS Made to order Custom Panels may be created from Acrylic, Aluminum, and Plastic Laminate materials. Custom Panels are available in sizes up to 24 W x 36 L with multi-panel ganged machined operations providing scaled economies and the lowest panel cost. ACE can provide a complete professional finished panel resource for all your custom panel design installation needs. Call the Ace Custom Order Desk at for more detailed panel information and specifications or custom@acebackstage.com. CNC ROTARY PANEL ROUTING MACHINE ACRYLIC SHEET Acrylic sheet stock is an excellent panel material. At 3/16 thick it is very flat and ridged, ideal for mounting large multi-pin connectors that require a heavy push/pull for engagement. It provides electrical isolation for connectors with grounded shells typical of many audio and video applications. This acrylic has a glossy black finish which is easily engraved and back filled with white acrylic paint for an up scale hi-tech appearance. Alternately, use the acrylic panel as a sub-panel and engrave a plastic laminant over lay panel for nomenclature call outs. ALUMINUM ALLOY SHEET Aluminum alloy sheet stock can be cut, black powder coated and engraved for almost any panel requirement. This alloy (6061-T6) is very ridged and flat. Stocked in 1/16 and 1/8 thickness. Smaller panels are typically made from 1/16 aluminum. Larger panels (e.g. rack panels) are cut from 1/8 aluminum. Other thickness are available on a custom order basis. Currently the connectrix system pocket panels, rack panels, and wall panels are fabricated from this tough aluminum alloy (see pgs 20 & 25). Ace Backstage Co., Inc. s CNC Rotary Panel Routing machine can produce custom cut panels from a number of different materials, including acrylic, aluminum, and plastic laminate sheets. This router can machine custom panels from 1/16 and 1/8 thick aluminum. INSET: ACE s CNC Rotary Panel Engraving machine can engrave on acrylic, aluminum, and plastic laminate sheets. Backfill characters are optional and extra using enamel or acrylic paint. ACRYLIC AND PLASTIC LAMINATE OVERLAY PANEL EXAMPLE PLASTIC LAMINANT SHEET Plastic Laminant sheet stock is used for engraved over lay panel. This material is 1/16 thick and provides an opaque engraveable laminated surface over a contrasting sub-surface (e.g. black over white). For example, when using a standard high density cutout panel, (connectrix #PNL1425, pg. 22) where some cutouts are not populated, an over lay panel can be cut and engraved showing only the positions used and covering unused positions. Many colors and combinations of front and reverse engraveable stock are available on request. Other uses include signs, operating instructions, block diagrams etc. for a permanent professional presentation on any project. A B C In this custom example the Plastic Laminate Overlay Panel (A) is routed and engraved to match the Acrylic Sub Panel (B) which is loaded with custom audio, data, electrical, and video connectors. The Acrylic Sub Panel provides electrical isolation for connectors with grounded shells. The 2 panels are then combined (C) and are ready for installation and wiring. PLASTIC LAMINANT ENGRAVING SECOND LAYER (TEXT COLOR) ENGRAVED AREA ACRYLIC SIZE(S) MATERIAL: Acrylic Sheet,.1875 (3/16 ) Thick ALUMINUM SIZE(S) MATERIAL: Aluminum Alloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick PLASTIC LAMINATE SIZE(S) SURFACE COLOR MATERIAL: Plastic Laminate Sheet,.062 (1/16 ) Thick 29

6 CUSTOM SPEC PANEL FABRICATION AND ENGRAVING CUSTOM SPEC PANEL FABRICATION AND ENGRAVING FACILIS Your panel will be made to the exact agreed specification and delivered on time. Panels are precision cut and engraved to your exact specifications from a variety of materials on precision CNC rotary cutting machines. Computer Assisted Drafting (CAD) systems feed data to the machines that define your panel cuts accurate ±.001. Panels and parts with identical material requirements are ganged together into a single production run. Acrylic, aluminum, and plastic laminate material panels are completely cut and engraved in the single set-up and production run for the fastest turn around time possible. The Aluminum panels, after cutting, are prepared for powder coating and thereafter sent to the engraving router. Lead times are generally much shorter for acrylic and plastic laminate because they are completed in the single fabrication event, and no further surface finishing is required. Aluminum requires additional time to powder coat and engrave. Cut, engraved, back filled and painted panel blanks are sent to the assembly bench and populated with the specified connectors, switches, nutserts etc. The final completed panel is carefully inspected and checked twice before packaging for shipment. CUSTOM ENGRAVING AND ASSEMBLY SPECIFICATIONS Unless otherwise specified Ace s Standard Panel Engraving and Assembly specifications are as follows: Character Height Maximum: 1/8 (9 point type) Font: Single Stroke Stick Character Text Font Alignment: Centered above component Number of Characters: 8 (including spaces) Panel Materials Ace will engrave: Acrylic, Aluminum, Plastic Laminants Backfill Characters: Optional extra using enamel or acrylic paint Connector Install: Black aluminum pop rivets, nutcerts with screws optional extra Panel Install: Black self tapping sheet metal/wood screws CUSTOM ENGRAVED AND POPULATED WALL PANELS #WP-300 CUSTOM WALL PANEL #WP-214 CUSTOM CONNECTRIX WALL PANEL CUSTOM ENGRAVED AND POPULATED CONNECTRIX POCKET PANELS CNC PANEL ROUTER #PNL-106 CUSTOM CONNECTRIX POCKET PANEL #PNL-1212 CUSTOM CONNECTRIX POCKET PANEL CUSTOM ENGRAVED AND POPULATED CONNECTRIX POCKET & RACK PANELS CNC PANEL ENGRAVER #PNL-1425 CUSTOM CONNECTRIX POCKET PANEL #RPL-345 CUSTOM CONNECTRIX RACK PANEL 30

7 CUSTOM SPEC POCKET FABRICATION CUSTOM SPEC POCKET FABRICATION FACILIS Services available from Ace Backstage Co., Inc. pocket from the ground up to meet your specified include Custom Spec Pocket Fabrication. In addition requirements. From conceptual planning to to our Standard and Super Pockets, Ace can creation, Ace can build you a custom pocket that develop custom pockets by utilizing our library of will meet all your design expectations. Call the standard components and pocket bodies to design ACE CUSTOM DESK at for more and create pockets that will fit your specific application. detailed information or us at custom@ace- Or you can have Ace create a custom backstage.com for custom quotes and questions. CUSTOM SPEC APPLICATION LID FABRICATION Custom Lids from Ace Backstage Co. can be designed to meet your custom application requirements. Ace can produce the following custom lids: A) Custom Keyed Locking Lids, B) Custom Sized Lids, and C) Custom Slot Closure Lids. (See below) CUSTOM STAGE POCKET PRODUCTION EXAMPLE A B C A) Custom Acrylic and Plastic Laminate Panel with connectors B) Custom Horizontal Panel Double Wide Double Deep Pocket C) Double Wide Double Deep Pocket with Custom Panel installed D E F D) Stock Double Wide Trim Bezel Lid Assembly fits Custom Pocket E) Custom Pocket w/ Panel and Trim Bezel Lid Assembly installed F) Final view of Custom Pocket with closed Trim Bezel Lid CUSTOM KEYED LOCKING LIDS Three different types of keyed locks with trim bezels are available for ACE Vertical Slant and Horizontal Panel Pockets (Note: No Carpet Locking Lids or Mini Pocket Locking Lids): A) Lock (S): Standard Flat Head Screw-driver Lock (key not included). B) Lock (H): Standard 5/32 Allen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included). A B C CUSTOM SPEC SIZED LIDS Lids can be designed to fit your application. This lid has the length of a Super Double Wide Pocket but half the width. Custom Lids are designed for Ace Pockets only. Call for more info on your custom Ace Stage Pocket Lids. Custom application Stainless Steel Trim Bezel Lid Assembly for step riser CUSTOM SLOT CLOSURE LIDS The Full Pocket below illustrates how a standard 3/8 cable way slot may be custom designed to meet your specified measurements. The X in the example shows how the cable way slot may be reduced or enlarged to create a custom designed pocket lid. Custom slot closure lids apply to Standard Lids only. 10-1/2 Square Custom application Full Pocket Lid with (2) keyed locks and an Antique Silvervein finish Custom application Trim Bezel Lid Assembly with extra large cable way U slot and extra wide Trim Bezel X = Custom Slot Closure Size X 31

8 STAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS #CSM-40 AND #CSM-60 CHOIR STICK MICROPHONES The CSM-60 and CSM-40 Choir Stick Microphone mounts on any standard microphone stand with any offers the ultimate performance of an standard taper-body mic stand clip. It is extremely overhead hanging choir mic in a totally portable stable and will not easily tip over. Five pick-up configuration. The low profile, light weight, black, pattern choices mean one will be right for your aluminum, space age alloy Stick mic is available needs. Use the CSM-40 or CSM-60 Choir Stick in both 40 and 60 models. The Boom Stick Microphone for children or adult groups on the places the microphone element ideally above and stage steps, portable risers or anywhere. over any choir. This versatile Stick microphone Choir Stick Microphone Model Numbers MODEL # DESCRIPTION #CSM-40/C...40 Long Choir Stick Mic w/ 120º Cardioid Element #CSM-40/H...40 Long Choir Stick Mic w/ 100º Hypercardioid Element #CSM-40/ML...40 Long Choir Stick Mic w/ 90º MicroLine Element #CSM-60/C...60 Long Choir Stick Mic w/ 120º Cardioid Element #CSM-60/H...60 Long Choir Stick Mic w/ 100º Hypercardioid Element #CSM-60/ML...60 Long Choir Stick Mic w/ 90º MicroLine Element #CSM-40 AND #CSM-60 CHOIR STICK MICROPHONE SPECIFICATIONS MODEL NUMBER MOUNT TYPE POLAR PATTERN ELEMENT TYPE FREQUENCY RESPONSE OPEN CIRCUIT SENSITIVITY 1 MAX INPUT SOUND LEVEL 2 DYNAMIC RANGE 3 SIGNAL-TO- NOISE RATIO 4 #CSM-40/60C Stick Mic Cardioid Fixed-charge back plate 40-20,000 Hz -42 db (7.9mV) 142 db SPL 115 db 67 db #CSM-40/60H Stick Mic Hypercardioid permanently polarized 40-20,000 Hz -42 db (7.9mV) 142 db SPL 115 db 67 db #CSM-40/60ML Stick Mic Microline condenser 30-20,000 Hz -35 db (17.7mV) 135 db SPL 109 db 68 db 1 re 1V at 1 Pa = 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db 2 1 khz at 1% T.H.D 3 1 khz at Max SPL 4 1 khz at 1 Pa - Typical A-weighted using System 1 #CSM-40 AND #CSM-60 CHOIR STICK MICROPHONE DESCRIPTIONS The CSM-40 (40 long) and CSM-60 (60 long) Choir Stick Microphone features AUDIO TECHNICA S miniature back-plate condenser elements assembled into an ultra light weight aluminum boom shaft (.312 Dia.) for long reach, high performance microphone applications. Each Stick microphone version is supplied with a Taper-Body Clutch Stand Mount and a U-U Clip ready for use with any standard microphone stand. The CSM STICK MICROPHONE is a wide range condenser microphone available with a series of interchangeable elements. It is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup situations. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well contoured appearance. The OUTPUT CONNECTION POWER MODULE for the Stick microphone is an Integral 3-pin XLRM-type, phased with PHANTOM POWER REQUIREMENTS of 9-52V dc, 2mA typical and an IMPEDANCE range of 200 ohms. CHOIR STICK MICROPHONE AUDIO-TECHNICA PICK-UP ELEMENTS CSM ELEMENT The flexible design of the Audio Technica gooseneck allows greater maneuverability of the condenser while maintaining a sleek, compact appearance. Extra Audio Technica elements (Cardioid, Hypercardioid, and MicroLine) optional. ML ELEMENT The MicroLine element designed by Audio Technica has a flexible gooseneck and extra long microphone yielding a tighter pattern and longer reach. Choir Stick Microphone shown in use at a music conference CHOIR STICK MIC INCLUDES... #Clutch Stand Mount TAPER BODY CLUTCH STAND MOUNT AND U-U CLIP #U-U Clip TAPER BODY CLUTCH STAND MOUNT The simple design of the Taper Body Clutch Stand Mount makes it easy to use on almost any standard microphone stand. The compact size creates a sleek look while maintaining a stable foundation. U-U CLIP The U-U Power Module Clip captures the power module against the mic stand for easy connection with mating cable. Made with state of the art molded plastic, this clip is strong and durable. Available in black. The Choir Stick Microphone is supplied with a Phantom Power Module, a U-U Power Module Clip, and a Taper Body Clutch Stand Mount. The Stick Mic also requires 9-52v of Phantom Power and Does Not include the stand. For more information on Ace s Choir Stick Mics including specifications, polar patterns, and installation guides, visit com 32