Item Number: STRIKE OFF IS ON ORDER BY DESIGNER FOR APPROVAL.

Transcription

1 Item Quantity: linl ft Address: P O DRAWER EAST WALNUT AVENUE DALTON GA Phone: Fax: Item Description: CARPET BASE GUEST ROOM Address: 3865 Scotts Mill Run PEACHTREE CORNERS GA Phone: (706) Fax: Andrew Miller andrew@mintgroupusa.com 11 Description: Dimensions: Color/Finish: 4" high carpet base, bound on one edge, made with 1/10 cut pile solid carpet. 100% solution dyed nylon, 32 ounce tufted pile weight. Primary backing Woven Polypropylene, secondary backing ActionBac. Passes ASTM E 648 Flooring Radiant Panel Class I. 4" high x 12' wide CH707 Notes: STRIKE OFF IS ON ORDER BY DESIGNER FOR APPROVAL. All quantities must be verified by installer. Installer responsible for on-site measurements, seaming diagrams and yardages Quantity noted is approximate only. Carpet must be color-fast, non-cracking and non-fading. Manufacturer must provide strike-off sample. Fabrication to be in accordance with corresponding BRAND PREAMBLES, be of contract quality suitable for commercial use, or new high-grade material, clean and free from defects in material and workmanship. Must be of contract quality and suitable for commercial use. Must meet all applicable fire codes and owner/ operator standards. All quantities must be verified by installer. Installer responsible for on-site measurements, seaming diagrams, and yardages. Quantity noted is approximate only.

2 Item Quantity: linl ft Item Description: CARPET BASE GUEST ROOM 12 Fire Hazard Classification: Must meet or exceed all required codes. Carpet must meet at minimum ASTM E Class 1. Manufacturer must provide strike-off sample and yarn samples of each color for approval prior to fabrication.. Refer to floor finish plans for location, design, and details. Installer to verify carpet meets the order specification prior to installing. All carpet installation materials to be as recommended by carpet manufacturer. Carpet to be static resistant or have static resistant finish. Carpet must be color-fast, non-cracking and non-fading. Installation per manufacturer's instructions and recommended materials/ adhesives. Installation must meet all local, state and safety codes. If carpet base meets another base material, heights of both materials MUST BE EQUAL once installed. Carpet base must be bound. Binding heavy duty to match carpet fiber. Carpet must be stain resistant. Carpet base installation direct glue down. Page 2

3 Item Quantity: sq yds Address: P O DRAWER EAST WALNUT AVENUE DALTON GA Phone: Fax: Item Description: GUESTROOM CARPET Address: 3865 Scotts Mill Run PEACHTREE CORNERS GA Phone: (706) Fax: Andrew Miller andrew@mintgroupusa.com 41 Style Number: A3932 Color: A: 4-283; B: CJ447; C: CH707 Width or Rug Size: 12'-0" CONFIRM WITH FLOOR PLANS Type: Multi Tuft Loop Tip sheared Repeat: 12" X 24" Content: 100% NSP ECO SOLUTION DYED NYLON Weight: 32 OZ/SQ YD FACE WEIGHT Primary Backing: Woven Polypropylene Secondary Backing: Classic Bac Pile Height.218" Gauge: 1/10 Stitches Per Inch: 13.17/INCH Dye Method: SOLUTION DYED Installation Method: Stretch In Over Pad Flame Requirements: ASTM E648 CLASS 1 FLOORING Notes: SAMPLE NUMBER W780W-0 IS APPROVED. MUST BE OF CONTRACT QUALITY AND SUITABLE FOR COMMERCIAL USE. MUST MEET OPERATOR STANDARDS. All quantities must be verified by installer. Installer responsible for on-site measurements, seaming diagrams, and yardages. Fire Hazard Classification: Must meet or exceed all required codes. If applicable codes do not address carpet pad it must at minimum meet ASTM E-84 class "B".

4 Item Quantity: sq yds Item Description: GUESTROOM CARPET 43 Manufacturer must provide in-scale artwork and strike-off sample of each pattern, and yarn samples of each color yarn for approval prior to fabrication. Refer to floor plans for location, design and details. Installer to verify carpet meets the order specification prior to installing. All carpet installation materials to be as recommended by carpet manufacturer. Carpet manufacturer to provide seaming diagrams to INNVISION DESIGN STUDIO for approval prior to ordering carpet. Carpet must be static resistant or have static resistant finish. Carpet must be color-fast, non-cracking, and non-fading. Carpet is to be used as area rug. Bind edges of carpet with 2" binding and thread to match field color of carpet. Binding color must be submitted for designer approval prior to production. Seaming: Hand sewn with locking stitch OR hot tape OR pin tape. Installation: Double stick. Page 2

5 WC-01 Item Description: WALLCOVERING AT HEADBOARD WALL 11 Item Quantity: linl yds Manufacturer: EYKON Source: EYKON Address: 5675 East Shelby Drive Address: 5675 EAST SHELBY DRIVE Memphis TN MEMPHIS TN Phone: (678) # :(800) Phone: (678) #:(800) Fax: Ann Cooper Description: TO BE USED AS FINISH 312 Pattern Number: Pattern Name: Color: Width: 54" Repeat: Type: Weight: Content: Backing: Fire Rating: ASL AVALON MESA VERDE SEE NOTES II 20 OUNCE 100% VINYL Scrim/Osnaburg ASTM E 84/Class A Fax: ANN COOPER cooper@eykon.net Fabrication to be in accordance with corresponding BRAND PREAMBLES, be of contract quality suitable for commmercial use, or new high-grade material, clean and free from defects in material and workmanship. Must meet or exceed all applicable fire code requirements. Installer responsible for on-site correct measurement and yardages. Contractor to verify all quantities prior to ordering. Quantity noted is only approximate. Refer to finish plans for exact location of wallcovering application. Installer to utilize manufacturer's installation recommendations and materials for installation. Sidemark must contain respective location and item number per ID STUDIO specifications. Wallcovering must be first run goods from full bolts or rolls. WC-01

6 WC-01 Item Description: WALLCOVERING AT HEADBOARD WALL 13 Item Quantity: linl yds Manufacturer: EYKON Source: EYKON Manufactuer to provide dye lot sample cutting of wallcovering (from current stock) for review and written approval by ID STUDIO, prior to purchasing, manufacturing, and installation of total quantity. Page 2 WC-01

7 Item Quantity: Manufacturer: NATIONAL WALLCOVERING Address: P O BOX 1999 LITTLE ROCK AR Phone: (678) # :(800) Fax: MAUREEN BLAIR maureen.blair@nationalwallcovering.com WC-02 Item Description: ACCENT WALLCOVERING AT BATH Source: NATIONAL WALLCOVERING Address: P O BOX 1999 LITTLE ROCK AR Phone: Fax: MAUREEN BLAIR maureen.blair@nationalwallcovering.com 11 Pattern Number: Pattern Name: Color: Width: 52" Repeat: Type: Weight: Content: Backing: Fire Rating: Notes: Y46842CP Canopy Willow See Notes II 20 Ounces Per Linear Yard Vinyl Osnaburg ASTM E-84 Class A Installation Notes: Reverse Hang / Random Match. TO BE USED ON WALLS TAGGED 312 "MODIFIED". Must be of contract quality and suitable for commercial use. Must meet or exceed all applicable fire code requirements. Installer responsible for on-site correct measurement and yardages. Contractor to verify all quantities prior to ordering. Quantity noted is only approximate. Refer to finish plans for exact location of wallcovering application. Installer to utilize manufacturer's installation recommendations and materials for installation. Sidemark must contain respective location and item number per INNVISION DESIGN STUDIO specifications. WC-02