R/V L ATALANTE H FLOOR AND WALL COVERINGS - SADDLERY SHIP REPAIRS 2014

Transcription

1 R/V L ATALANTE H FLOOR AND WALL COVERINGS - SADDLERY SHIP REPAIRS GALLEY The work consist to redo the whole floor of the galley by including a draining system. - Removal all equipments in the galley (store in the cafeteria), - Removal all the tile and the scratch coat, - Careful cleaning of the deck metal sheet, - After checking of thickness of floor plate, applying of a primary paint coat, - Supply and fit a draining system: - The draining system is represented by the blue line on the scheme below, - To facilitate the flow, the shipyard respect the slope of one cm per meter - The draining system will be equivalent to the system shown in the picture below Nota : if a part of floor plate must be replaced, this work will be quoted after check. Chapter H H - 1

2 - Applying a scratch coat to apply new tiles, - Supply and applying new non skid tiles: - Tile size will be of 150 x 150 max, - The tile will be light color (to define the beginning of repairs) - Supply and applying stainless steel skirtings - Refit of equipments stored in the cafeteria excepted following equipment (supplied by owner): - The refrigerated cabinet marked 50, - The oven marked 4, - The bain marie cabinet marked 12, - The grill marked 5 Chapter H H - 2

3 Misc. works: - Bain marie cabinet (marked 12) and new cabinet The new bain marie cabinet will be change of place, and a new cabinet will be manufactured as follow: - The new cabinet will be in three parts, the part n 2 will be removable and hinged on the part 3. - Dimensions: - Height: 900 mm - Length of part 2: 800 mm - Length of part 3: 800 mm - Length of part 1: to adapt depending of size bain marie cabinet - The part 1 include two drawers, and a half shelf - The part n 3 will be totally closed with three she lfs inside. The cabinet could be closed by key Chapter H H - 3

4 New place of bain marie cabinet Part 1 New cabinet in three parts Part 2 Part 3 - Sink cabinet maker 41 This sink will be placed at the same height as the dishwasher. Chapter H H-4

5 - Cabinet maker 43 A new cabinet will be fabricate and fit at the same place: - The bottom will funnel to facilitate drainage. - A planar grid covers all to drag baskets Chapter H H - 5

6 - Door frames (number: 2) After removal doors, replacement of frames, and fit new doors supplied by owner. FIXED PRICE for the whole... Chapter H H-6

7 2. COMMON TOILET DECK E Location: bottom of the stairs to access at the bridge - Removal tiles, skirts and scratch coat, - Removal of the sink pipe, - Refection of the deck passageway - Fit a new pipe, - Careful cleaning of the deck metal sheet, - After checking of thickness of floor plate, applying of a primary paint coat, - Applying an undercoat of resin TEFROTEX 60 (or equivalent): 30 mm - Applying a top coat of TEFROKA PU-1-L (or equivalent): 4 mm - Set new skirts. Chapter H H - 7

8 3. LAUNDRY ROOM - Removal washing machines and the sink in the corridor (this requires to remove the door and the frame of the door), - Put the drying machine on the aft part of this room, - Removal the ceiling in the store room deck B (store room below the laundry room), - Removal tiles and skirting boards, - Removal the scratch coat, - Grinding the bottom of bulkhead, - Removal all the frames of machines, - Careful cleaning the floor plate and bottom of bulkhead, - Confection of new frames for machines as shown below (be careful, distances appear in cm) - Applying a scratch coat to apply new tiles, - Supply and applying new non skid tiles: - Tile size will be of 150 x 150 max, - The tile will be light color (to define the beginning of repairs) - Supply and applying stainless steel skirtings - Length: mm - Height: 100 mm Note: the tile part, where are stored drying machines during work, will do after replace drying machines Chapter H H - 8

9 Chapter H H - 9

10 - Replace drying machines, - Refection of the aft part floor as described before, - Replace wahing machines and the sink, - Rection of the frame door, - Replace the door, - Refit the ceiling of the store room deck B. NEW ARRANGEMENT OF THE LAUNDRY ROOM Chapter H H - 10

11 4. CARPET Concern following rooms: - Officer area Surface area: 28 m² - Cabin E1 Surface area: 3 m² - Cabin E2 Surface area: 3 m² - Cabin E4 Surface area: 3 m² Removal of the carpet, Refection of scratch coat if necessary, Supply and fit a laminated flooring (same type in the corridor) 5. BENCHES Concern cabins E1 and E4 (same dimension) - Replacement of the foam and the textile (color to be defined) Chapter H H - 11

12 Concern cafeteria: - Number: 10 - Seated sizes: L 1080 x l 580 x h Backboards: L 1080 x l 180 x h Replacement of the foam and the textile (color to be defined) 6. ROLLER BLIND Number: 3 Supply and fit a roller blind for following rooms: - Cabin B8, size: 840 x Cabin B12, size: 820 x Deck E on starboard side before entry of scientist control room, size: 750 x 620 Chapter H H - 12

13 7. CLEANING OF SHIP 7.1 Officer area - Wash cushions for benches. - Seated: sizes L: 700 x l: 650 x h: 160 Nbr.: 13 - Backboards: sizes L: 700 x l: 400 x h: 120 Nbr.: 16 - Stools: sizes L: 680 x l: 680 x h: 160 Nbr.: Crew area - Wash carpet - Wash cushions for benches. 7.3 Accommodation (To be carried out on completion of technical works). - Overall wash of accommodation of decks B, C, D and E - For each of these decks, this includes: - gangways: floors and partitions - shared toilets on each deck - stairways between decks - all doors - common rooms: - kitchen - cafeteria - Full wash of following rooms located on deck A: - Store room - Sports room - Stairways and down partitions of deck B to deck A, from cafeteria Chapter H H - 13

14 8. WORK IN STATE CONTROL Normal hourly rate:... Additional hourly rate (indicating the corresponding hourly slots): Hourly rate for Saturday and Sunday:... (Idem) Hourly rate for public holidays:... (Idem) Enclose your special tool rates. NOTE: The board, unless otherwise specified, provides spare parts. However, you kindly tell us if you are representative of material that must be visited, or if you own spare parts for such material. A statement of work, clearance, wear, replacement parts will be returned at board at the end of the technical stop: - 3 copies «paper», - 1 copy in digital format Are included in the visited items: cleaning units recovered, and removal of foreign matters in the bilge after works. Chapter H H - 14