Tape thickness: 0.15mm

Transcription

1 Double-coated adhesive tape Outline Nitto Denko No. 535 is.15 mm-thick thin layer polyester film based double-coated adhesive tape with acrylic adhesive. The tape has a superior adhesion to curved surface and an excellent converting performance. Structure Tape thickness:.15mm Acrylic adhesive Polyester film (#1) Acrylic adhesive Release paper Features Superior adhesion to 3D curved surface as the thick adhesive. Excellent bonding performance to various substrates. The six hazardous materials restricted by the RoHS directive are not compounded. Applications Fixing of bonding of window panel for cellular phone. Fixing of various electronic component. Standards Size Tape thickness (mm) Width (mm) Length (m) For more information, please contact a person in charge. 1-P-_E (1/)

2 Adhesion[N/mm] degree peeling adhesion by substrates Substrates ABS plate. Polystyrene plate 17.5 Acrylic plate 19. Polycarbonate plate.5 Glass plate 19. Stainless steel plate 19. Aluminum plate. Polyester film 19. Polyimide film.5 (Unit: N/mm) Peeling angle: degree Measurement condition: 3 degree C. x 5%RH * 1 pass back and forth with -kg roller <Test method> PET#5 Substrate [Conforms to JIS Z-37] 1 1 ABS PSt Acrylic PC PET SUS Alu Glass Polyimide Substrates 1-P-_E (/)

3 Adhesion[N/mm] degree peeling adhesion by temperatures Temperatures (Unit: N/mm) Peeling angle: degree Measurement temperature:, 1, 3,,, degree C. Application under various temperatures Measurement under various temperatures Substrate: Stainless steel plate * 1 pass back and forth with -kg roller 1 1 degree C. 1 degree C. 3 degree C. degree C. degree C. degree C. Temperatures Temperatures Resistance to repulsion Lifting distance.5 Aluminum Tape Substrate Measure the lifting distance After 7 degree C. x hours (Unit: mm) To laminate to aluminum plate (mm width,.5mm) and peel the release liner. Then it is laminated to a substrate ABS. Measure the lifting distance after leave it for hours at 7 degree C. 1-P-_E (3/)

4 Adhesion[N/mm] Holding power Slippage distance. (Unit: mm/hr) Measurement temperature: degree C. Application area: 1mmxmm Load:.9N (5g) Substrate: Phenol resin plate Phenol resin plate <Test method> PET#5 w Shear strength Temperature <Test method> Shear strength 5 (Unit: N/mm x mm) Substrate: Acrylic plate/acrylic plate Tape area: mm mm Peeling speed: 5mm/min Measurement condition: 3 degree C. x 5%RH * 1 pass back and forth with 5-kg roller Measurement method: A specimen is prepared and shear strength is measured after allowing it to set 3 minutes. Acrylic plate Acrylic plate Peeling speed 5mm/min degree peeling adhesion by pressures Pressures.1 kg.3.5 kg.5 kg kg 19. (Unit: N/mm) Peeling angle: degree Measurement temperature: 3-degree C. x 5%RH 1 pass back and forth with.1kg,.5kg, kg, 5kg 1 1.1kg.5kg kg 5kg Pressures Pressures 1-P-_E (/)

5 Adhesion[N/mm] degree peeling adhesion after application (increase) Time.5hrs 19. hrs 19. 1hrs 19.3 hrs 19. hrs 19.9 (Unit: N/mm) Peeling angle: degree Measurement temperature: 3 degree C. x5%rh Substrate: Stainless steel plate 1 pass back and forth with -kg roller 7hrs hrs hrs 1hrs hrs hrs 7hrs Time Time Indentation adhesion Indentation adhesion 115 ABS plate Acrylic plate Probe (1mm) (Unit: N) Acrylic plate:3 mm x mm Sample: mm width (a picture frame shaped) Diameter of hole: 13mm The tape sample applied to the acrylic plate is adhered ABS plate by 1 pass back and forth with 5kg.roller After it left at 3 degree C. x 5% for 3 minutes, the acrylic plate is pushed through the hole with a probe 1mm at 5mm/min. 1-P-_E (5/)

6 Precautions when using Remove all oil, moisture and dirt from the surface of the substrate before applying. The tape employs pressure-sensitive adhesive. Be sure to apply pressure with a roller or press when applying. Failure to do so could affect properties or appearance. The tape may not adhere well to significantly uneven or distorted surfaces. Level off the surface as much as possible before applying. Avoid applying a large load to the tape for several hours following application. Precautions when storing Be sure to keep the tape in its box when not using. Keep in a cool dark place not exposed to direct sunlight. Safety precautions! WARNING Make sure the product is suitable for the application (objective and conditions) before attempting to use. The tape may come off depending on the substrate to or conditions under which it is applied. Use in combination with another method of joining if there is possibility of an accident. Published in October 13 1-P-_E (/)