LOCKING FASTENING SEALING BONDING.

Transcription

1 LOCKING FASTENING SEALING BONDING 1

2 BEST Company BEST-Klebstoffe GmbH & Co. KG Since 1996 your reliable and competent partner for high quality adhesives and adhesive solutions MADE IN GERMANY! Our target groups: Machinery- and Plant Construction Automobile Industry Shipbuilding Industry Electrical Industry Aerospace Industry Glass Processing Industry Plastics Processing Industry Optical Industry Toy Industry Furniture Industry Fittings Industry Pipeline Construction Transportation Industry Our forte: Up-to-date technical know-how Innovative development of customer specific adhesives and adhesive solutions Customer oriented Flexible Prompt In-house production Wide product range Standard products Customized products Excellent price-performance ratio Constant BEST quality MADE IN GERMANY! BEST-distribution Reliable customer advisory service Highest customer satisfaction Adhesives Industry Private-Label-Customers 2

3 BEST Certificates CERTIFICATE ISO 9001:2008 DEKRA Certification GmbH hereby certifies that the company BEST Klebstoffe GmbH & Co. KG BEST quality for BEST customers! Scope of certification: development, production and distribution of adhesives Certified location: D Kinsau, Gewerbestraße has established and maintains a quality management system according to the above mentioned standard. The conformity was adduced with audit report no. A This certificate is valid from to Certificate registration no.: /4 Duplicate DEKRA Certification GmbH Stuttgart, Lack of fulfilment on conditions as set out in the Certification Agreement may render this certificate invalid. DEKRA Certification Gm bh * Handwerkstraße 15 * D Stuttgart * www. dekra-certification.de page 1 of 1 Our high quality requirements are reflected in the certification of our quality management system according to DIN EN ISO 9001 : 2008 For your safety, product quality and for your information we also guarantee conformity according to REACH for all BEST-products. 3

4 BEST Product Groups Selection charts: BEST-MK anaerobic adhesives BEST-CA instant adhesives BEST-KL epoxy resin based adhesives BEST-PL acrylate based adhesives BEST-PU 2-component polyurethanes BEST-QuickMix 2-component epoxy adhesives BEST-MK anaerobic adhesives Thread locking Surface sealing Pipe sealing Joining Anaerobic-/UV-curing BEST-CA instant adhesives Cyanoacrylates BEST-structural adhesives BEST-Silicone BEST-Contact Adhesive BEST-MS Polymer BEST-2-component epoxy adhesives BEST-2-component methacrylates BEST-2-component polyurethanes BEST-cleaners and -technical sprays BEST-Activator BEST-Primer BEST-Rust remover BEST-Chain spray BEST-Cleaner BEST-Leaklocatorspray DVGW BEST-UV adhesives BEST-KL epoxy resin based adhesives BEST-PL acrylate based adhesives BEST-Uvirapid highspeed adhesive on basis of a modified thiol 4

5 BEST-MK Anaerobic Adhesives BEST-MK anaerobic adhesives -anaerobic curing, one-component adhesives Thread locking (low-, medium-, high-strength, heat resistant) Surface sealing (low-, medium-strength) Pipe sealing (low-, medium-, high-strength) Joining (high-, super high-strength) Anaerobic-/UV-curing (high-strength) Many products not classified! Standard unit sizes: 5ml 10ml 50ml 250ml 600ml 10l Bag-in-Box Special sizes and private-label filling upon Customer-specific special products upon Fields of application Active surfaces: Steel, brass, copper, bronze, iron, aluminum, zinc Passive surfaces: High-alloyed steel, nickel, tin, silver, gold, oxide layers, chromate layers, anodic coating Inactive surfaces: Plastics, glass, ceramics, elastomers, wood, layers of lacquer Pre-treatment of bonding surface with BEST-Cleaner or BEST-Aktiv A activator Curing method: Exclusion of air and metal contact or heat from approx. 100 C up to 120 C For some customized products, additional curing with UV-light possible Acceleration of curing on passive and surfaces with BEST-Aktiv A activator, heat supply or combination of both methods 5

6 BEST-MK Anaerobic Adhesives Thread Locking BEST Item no. Application Strength class Colour Viscosity (mpa S) Maximum thread size up to Gap filling (mm) up to max. Breakloose moment M-LB (Nm) Breakaway moment Compressive shear (MPa) Fixture time (min) Curing time (h) Temperature range ( C) MK 1122 MK 1131 MK 1222 MK 1226 MK 1231 MK 1232 MK 1231T MK 1312 MK 1325 MK 1326 MK 1331 MK 1523 MK 1531 Thread locking, not classified, low viscosity, easy disassembly Thread locking, not classified, medium viscosity, easy disassembly Thread locking, not classified, low viscosity, disassembly possible with special tools Thread locking, not classified, medium viscosity, disassembly possible with special tools Thread locking, not classified, medium viscosity, DVGW-approval, suitable for sealing of pipe connections Thread locking, medium viscosity, for inactive and passive surfaces without need of an activator Thread locking, medium viscosity, heat resistant up to 220 C Thread locking, capillary, fills very fine hairline cracks, difficult to disassemble Thread locking, low viscosity, for the bonding of coaxial parts, disassambly extremely difficult Thread locking, low viscosity, for inactive and passive surfaces without activator Thread locking, not classified, medium viscosity, extremely difficult to disassemble Thread locking, low viscosity, for the bonding of coaxial parts, disassambly extremely difficult Thread locking, medium viscosity, for the bonding of coaxial parts, disassambly extremely difficult T h r e a d L o c k i n g low red 300 M12 0,04-0,13 9 to 21 < M-LB to to +150 low red thix M36 0,08-0,25 8 to 20 < M-LB to to +150 medium blue 400 M12 0,04-0,13 13 to 33 < M-LB to to +150 medium blue 600 thix M36 0,08-0,18 14 to 30 < M-LB to to +150 medium blue thix M36 0,08-0,25 14 to 30 < M-LB to to +150 medium yellow thix M36 0,08-0,25 15 to 25 < M-LB to to +200 medium blue thix M36 0,08-0,25 14 to 30 < M-LB to to +220 high green 15 M5 0,01-0,05 25 to 55 up to to to +150 high green 650 M20 0,05-0,15 25 to 54 up to to to +150 high green 800 M20 0,05-0,15 28 to 40 up to to to +150 high green thix M36 0,08-0,25 25 to 54 to to to +150 heat resistant green 400 M20 0,05-0,15 35 to 55 < M-LB to to +220 heat resistant green thix M36 0,08-0,25 30 to 50 to to to

7 BEST-MK Anaerobic Adhesives Pipe Sealing BEST Item no. MK 2138 MK 2141 MK 2226 MK 2235 MK 2236 MK 2238 MK 2241 MK 2255 MK 2332 MK 2336 MK 2338 MK 2535 Application Strength class Colour Viscosity (mpa S) Maximum thread size up to P i p e Gap filling (mm) up to max. S e a l i n g Breakloose moment M-LB (Nm) Breakaway moment Compressive shear (MPa) Fixture time (min) Curing time (h) Temperature range ( C) Pipe sealing for metal pipe threads, not classified, high viscosity low red R3" 0,1-0,25 10 to 25 < M-LB to to +150 Pipe sealing for metal pipe threads, not classified, high viscosity, on basis PTFE low white R3" 0,1-0,25 7 to 15 <M-LB bis to +150 Pipe sealing for metal pipe threads in hydraulic systems, not classified, medium viscosity medium brown 500 thix R3/4'' 0,04-0,13 14 to 30 < M-LB to to +150 Pipe sealing for metal pipe threads, not classified, DVGW-certified, high viscosity medium blue thix R3" 0,1-0,25 15 to 35 < M-LB to to +150 Pipe sealing for metal pipe threads, high viscosity, for inactive and passive surfaces with activator medium yellow R3" 0,1-0,25 15 to 35 < M-LB to to +150 Pipe sealing for metal pipe threads, not classified, DVGW-certified, high viscosity medium blue R3" 0,1-0,25 12 to 30 < M-LB to to +150 Pipe sealing for metal pipe threads, not classified, high viscosity, on basis of PTFE medium white thix R3" 0,1-0,25 10 to 20 < M-LB to to +150 Pipe sealing for larger pipe threads, high viscosity, DVGW-certified medium yellow thix R3" 0,1-0,25 12 to 20 < M-LB to to +150 Pipe sealing, medium viscosity, flexible, used for plastic pipes with Aktiv A high green thix R3" 0,1-0,25 20 to 40 < M-LB to to +150 Pipe sealing, high viscosity, for inactive and passive surfaces without activator high green R3" 0,1-0,25 15 to 35 > M-LB to to +150 Pipe sealing, not classified, for the sealing in hydraulic systems, resists pressure up to 65bar high green thix R3" 0,1-0,25 25 to 55 > M-LB to to +150 Pipe sealing especially for pipe threads exposed to heat high red R2" 0,1-0,25 12 to 36 > M-LB to to 220 7

8 BEST-MK Anaerobic Adhesives Surface Sealing, Joining, Anaerobic-/UV-curing BEST Item no. Application Strength class Colour Viscosity (mpa S) Maximum thread size up to Gap filling (mm) up to max. Breakloose moment M-LB (Nm) Breakaway moment Compressive shear (MPa) Fixture time (min) Curing time (h) Temperature range ( C) MK 3147 MK 3247 MK 4422 MK 4423 S u r f a c e S e a l i n g Surface sealing, not classified, paste-like, sealing of casings and flanges, easy to remove low red thix R3" 0,1-0,3 / / / 5 to to +150 Surface sealing, not classified, paste-like, sealing of casings and flanges, disassembly with special tools medium blue thix R3" 0,1-0,3 / / / 2 to to +150 J o i n i n g Joining, low viscosity, for bonding of bearings and bushings and gears to shafts super high green 400 M12 0,04-0,13 40 to 60 to to to +175 Joining, not classified, low viscosity, for bonding of bearings and bushings and gears to shafts super high green 200 M12 0,05-0,15 30 to 46 to to to +175 MK 4425 Joining, medium viscosity super high green 600 M20 0,05-0,15 38 to 57 to to to +175 MK 4433 Joining, high viscosity, DVGW-certified, levels out uneven surfaces super high green M36 0,1-0,3 40 to 60 to to to +175 MK 4451 Joining, colour metalic-grey, for the repair of blowholes and cracks on bearings, bushings and hub- shaft connections super high grey metalic thix R3" 0,1-0,4 20 to 40 > M-LB to to +175 MK 1812 MK 4825 MK 4838 A n a e r o b i c - / U V - C u r i n g Anaerobic/UV-curing adhesive, low viscous, capillary, for subsequent bonding high colourless 15 M5 0,01-0,05 25 to 55 bis to to +150 Anaerobic/UV-curing adhesive, medium viscous, cures anaerobically in shadow zones high colourless 600 M20 0,05-0,15 38 to 57 bis to to +175 Anaerobic/UV-curing adhesive, high viscous, cures anaerobically in shadow zones high ochre M36 0,1-0,3 40 to 60 bis to to

9 9

10 BEST-CA Instant Adhesives BEST-CA instant adhesives - One-component adhesives based on an ester of the cyanoacrylic acid Fields of application High strength, permanent bonding within seconds of metals, plastics, wood, elastomers, ceramics Rapid cure upon enclosure between two bonding surfaces Optimal application conditions Relative humidity (ambient air) of 40 70% Pre-treatment of bonding surfaces with BEST-Cleaner, BEST-Primer C, BEST-Aktiv C activator Acceleration of curing with BEST-Aktiv C activator Standard unit sizes: 10ml 20ml 50ml 500ml Special sizes and private-label filling upon Pre-treatment of surfaces difficult to bond with BEST-Primer C Removing of adhesive residue with BEST-Remover For structural bonding with BEST-CA adhesives, use BEST-CA Filler For filling of gaps and shrink holes, use BEST-CA Filler Customer-specific special products upon 10

11 BEST-CA Instant Adhesives BEST Item no. Application Chemical basis Colour Viscosity (mpa S) Gap-filling capacity (mm) Curing method Compressive shear N/mm² DIN Fixture time (sec) Functional strenth (min) Ultimate strenth (h) Temperature range ( C) CA 105 Universal, fast curing, metal/metal Modified Methyl-Cyanoacrylate clear/colourless 3 0,01 humidity to CA 114 Universal, bonding of plastics, metal etc. Modified Methyl-Cyanoacrylate clear/colourless 40 0,03 humidity to CA 212 Universal, age resistant Ethyl-Cyanoacrylate clear/colourless 20 0,02 humidity to CA 214 Flexible, bonding of rubber/elastomere Modified Ethyl-Cyanoacrylate clear/colourless 100 0,07 humidity CA 216 Universal, bonding of rubber, metal etc. Ethyl-Cyanoacrylate clear/colourless 60 0,02 humidity to CA 221 Very fast curing Ethyl-Cyanoacrylate clear/colourless 100 0,05 humidity to CA 224 For porous materials Ethyl-Cyanoacrylate clear/colourless 300 0,07 humidity >15 10 to CA 229 Medium viscosity, slower curing Ethyl-Cyanoacrylate clear/colourless 900 0,15 humidity to CA 233 Slower curing allows readjustment Ethyl-Cyanoacrylate clear/colourless ,15 humidity to CA 233T High temperature resistant Ethyl-Cyanoacrylate clear/colourless ,15 humidity >15 < CA 236 Rubber filled, resistant to vibrations Ethyl-Cyanoacrylate black thix 0,2 humidity to CA 244 CA 422 For application on vertical surfaces, for porous materials Low viscous, for the bonding of PMMA, low ordour, does not leave a white residue Ethyl-Cyanoacrylate clear/colourless Gel 0,3 humidity < Alcoxy-Ethyl-Cyanacrylate clear/colourless 100 0,15 humidity to CA 432 Low ordour, does not leave a white residue Alcoxy-Ethyl-Cyanacrylate clear/colourless ,15 humidity to Additional or special products upon request Please contact us: info@bestklebstoffe.de! 11

12 BEST-UV Adhesives BEST-KL UV-Curing Epoxies BEST-KL UV adhesives - One-component, UV-curing adhesives based on an epoxy resin Dry surface, cationic cure and low shrinkage Excellent electrical properties / free of ions, excellent temperature and chemical resistance, minor dark cure properties, short curing time, easy to apply Fields of application Bonding of plastics, glass, metal Electronics Electrotechnology Casting and coating of electronic compenents Pre-treatment of bonding surface with BEST-Cleaner Enhancement of adhesion with BEST-Primer K Standard unit sizes: 10ml 50ml 250ml 1 litre Curing method: Exposure to UVA-light Acceleration of curing by exposure to temperature For curing, we recommend our BEST-curing lamps! Special sizes and private-label filling upon Customer-specific special products upon 12

13 BEST-UV Adhesives BEST-KL UV-Curing Epoxies BEST Item no. Application Colour Viscosity (mpa S) Wave length for curing (nm) Curing method Shear strength N/mm² Elongation at tear (%) Fixture time (sec) Ultimate strenth (h) Temperature range ( C) KL 6006 For flexible, temperature resistant casting colourless to yellowish UVA-light to +150 KL 6008 For sealing of soldering contacts in relays colourless to yellowish UVA-light to +150 KL 6009 For casting of electronic components colourless to yellowish UVA-light to +150 KL 6042 KL 6059 KL 6060 For bonding of glass with synthetic materials and metals For sealing of soldering contacts Medium viscous, flexible, for sealing of soldering contacs colourless to yellowish colourless to yellowish colourless to yellowish UVA-light to UVA-light to UVA-light to +150 KL 6084 Bridging of bonding gaps up to 1 mm clear/colourless UVA-light to +150 KL 6142 For fixing of wires in the field of electronics colourless to whitish UVA-light to +150 Additional or special products upon request Please contact us: info@bestklebstoffe.de! 13

14 BEST-UV Adhesives BEST-PL UV-Light Curing Acrylates BEST-PL UV adhesives One-component, modified UV-light curing acrylate-based adhesives Radical cure Fields of application Bonding of glass Bonding of translucent plastics among each other Bonding of translucent plastics with metals, ceramics, and non-translucent plastics Pre-treatment of bonding surfaces with BEST-Cleaner Enhancement of adhesion with BEST-Primer P, depending on product type Standard unit sizes: 10ml 50ml 250ml 1 litre Special sizes and private-label filling upon Curing method Exposure to UVA or visible light For special product types (MK anerobic/uv-curing), exclusion of air and metal contact in shadow zones (anaerobic) Exposure to heat (100 /30 min), BEST-Aktiv A activator can be used Acceleration of curing by temperature increase For curing, we recommend our BEST-curing lamps! Customer-specific special products upon 14

15 BEST-UV Adhesives BEST-PL UV-Light Curing Acrylates BEST Item no. Application Colour Viscosity (mpa S) Wave length for curing (nm) Curing method Shear strength N/mm² Elongation at tear (%) Fixture time (sec) Ultimate strenth (h) Temperature range ( C) PL 5010 Glass/glass - glass/metal colourless UVA-light to to +120 PL 5023 Universal, flexible colourless UVA-light to to +120 PL 5113 Temperature resistant colourless to yellowish UVA-light and/or heat to to +150 PL 5141 Glass/glass - glass/metal colourless UVA-light to to +120 PL 5147 Glass/glass - glass/metal colourless UVA-light to to +120 PL 5151 Glass/glass - glass/metal colourless to yellowish visible light to to +120 PL 5176 Universal, flexible colourless UVA-light to to +120 PL 5194/2 Universal, flexible light yellow visible light to to +120 PL 5237 Glass/glass - glass/metal colourless UVA- and visible light to to +120 PL 5240 Glass/glass - glass/metal colourless thix UVA- and visible light to to +120 PL 5373 Bonding of PMMA plastics colourless to yellowish UVA- and visible light to to +120 Additional or special products upon request Please contact us: info@bestklebstoffe.de! 15

16 BEST-UV Adhesives BEST-Uvirapid Highspeed Adhesives BEST-Uvirapid highspeed adhesives One-component, solvent free UV-highspeed adhesives based on a modified Acrylate Ester Extremely rapid cure Low energy consumption Curing within seconds possible, even when used with a UV-LED-Flashlight Cures with dry surface when used for encapsulating Fields of application Open applications, encapsulating of electronic components Coating of surfaces Bonding of glass Bonding of translucent plastic materials together or with each other Bonding of translucent plastic materials with metals, plastics and elastomeres Pre-treatment of bonding surfaces with BEST-Cleaner Standard unit sizes: 10ml 50ml 250ml 1 litre Special sizes and private-label filling upon Enhancement of adhesion with BEST-Primer P, depending on product type Curing method: Curing with UV-LED flashlight or any UV-lamp For curing, we recommend our BEST-41-UV-LED Flashlight! Customer-specific special products upon 16

17 BEST-2K Structural Adhesives BEST-2K-Methacrylate BEST-2K methacrylates - 2-component high-power adhesives based on a modified methacrylate ester Mixture ratio: 1:1 High resistance against chemicals and environmental influences BEST-MA 1044 opaque, pot life: 3 minutes Standard unit sizes: 25 ml syringes 50 ml cartridges 400 ml cartridges Special sizes and private-label filling upon Customer-specific special products upon Fields of application Metals Ceramic materials Glass Wood Rubber Hard plastics Pre-treatment of bonding surfaces with BEST-Cleaner Enhancement of adhesion with BEST Primer P For the application of BEST-MA, we recommend our BEST-Dispensing Guns and BEST-Mixing Tubes! 17

18 BEST-2K Structural Adhesives BEST-2K-QuickMix BEST-2K-QuickMix - 2-component all-purpose adhesives based on epoxy resin Gap filling Mixture ratio: 1:1 High resistance against chemicals, environmental influences Standard unit sizes: 25 ml syringes 50 ml cartridges 400 ml cartridges Special sizes and private-label filling upon Fields of application Metals Ceramic materials Glass Wood Rubber Hard plastics Pre-treatment of bonding surfaces with BEST-Cleaner Enhancement of adhesion with BEST Primer P For the application of BEST-QuickMix, we recommend our BEST-Dispensing Guns and BEST-Mixing Tubes! Customer-specific special products upon 18

19 BEST-2K Structural Adhesives BEST-2K-QuickMix BEST Item no. Application Chemical basis Colour after curing Viscosity in Pas Component A Component B Temperature range ( C) Pot life Fixture time Ultimate strength Tensile shear strength in N/mm 2 18 Universal, filled with mineral additives Epoxy/Amino white or black to min 90 min 24 h up to Metal filled "Quick Metal" Epoxy/Mercaptan grey metalic to min 20 min 24 h up to Multi-purpose adhesive, excellent adhesive power on a variety of different materials Epoxy/Mercaptan yellowish opaque to min 5-10 min 3 h up to Forms strong bonds; for application on vertical surfaces Epoxy/Amino yellowish opaque to min 90 min 24 h up to Elastic, resistant against vibrations Epoxy/Amino yellowish to min 5 h 48 h up to Area of application: electrical engineering Epoxy/Amino yellowish to min 2 h 48 h up to Fast curing, for the application on vertical surfaces Epoxy/Mercaptan yellowish opaque to min 20 min 24 h up to 28 Liquid Metal Metal coloured, for the bonding and filling of damaged components Epoxy/Mercaptan metalic to min min 2-3 h

20 BEST-2K Structural Adhesives BEST-2K Polyurethanes BEST-2K polyurethanes - 2-component reactive adhesives based on polyurethane for permanent, constructive bonding Gap filling, mixture ratio: 1:1 High resistance against chemicals, environmental influences Fields of application Thermoplastics, thermosetting materials, steel, aluminium, concrete, wood, glass Rigid, semirigid, flexible Pre-treatment of bonding surfaces with BEST-Cleaner Standard unit sizes: 50 ml cartridges 400 ml cartridges Curing method Chemical polyaddition reaction (low shrinkage, low heat generation) Enhancement of adhesion with BEST Primer P For the application of BEST-PU adhesives, we recommend our BEST-Dispensing Guns and BEST-Mixing Tubes! Special sizes and private-label filling upon Customer-specific special products upon 20

21 BEST-2K Structural Adhesives BEST-2K Polyurethanes 2-component Reactive Adhesives BEST Item no. Application Properties Colour Viscosity (mpa S) Shore - hardness Elongation at break Tensile strength N/mm² Processing time / pot life Curing time Ultimate strength Temperature range ( C) Specific electrical resistance PU-1504 Structural bonding rigid black D 15% 22 1 min 5 min 4 h -36 to ,2 x Ωxcm thixotrop PU-1512 Structural bonding rapid cure transparent D 20% sec 3 min 3 h -36 to ,2 x Ωxcm thixotrop PU-1513 Structural bonding rigid grey D 15% 22 1 min 5 min 4 h -36 to ,2 x Ωxcm thixotrop PU-1505 Structural bonding rigid black D 15% 22 5 min 15 min 8 h -36 to ,2 x Ωxcm thixotrop PU-1507 Structural bonding semi-rigid black D 20% 23 5 min 15 min 8 h -36 to ,8 x Ωxcm thixotrop PU-1516 Structural bonding rigid black D 15% min 90 min 12 h -36 to ,2 x Ωxcm thixotrop PU-1517 Structural bonding rigid black D 15% min 240 min 24 h -36 to ,2 x Ωxcm thixotrop PU-1515 Structural bonding rigid grey D 15% 22 5 min 15 min 8 h -36 to ,2 x Ωxcm thixotrop PU-1523 Structural bonding semi-rigid white D 15% 22 1 min 5 min 4 h -36 to ,2 x Ωxcm thixotrop PU-0506/B Structural bonding flexible black A 120% 20 1 min 5 min 4 h -36 to ,2 x Ωxcm thixotrop PU-0506/T Structural bonding flexible transparent A 120% 20 1 min 5 min 4 h -36 to ,2 x Ωxcm thixotrop PU-0587/B Structural bonding flexible black A 120% 20 5 min 15 min 8 h -36 to ,2 x Ωxcm thixotrop PU-0587/T Structural bonding flexible transparent A 120% 20 5 min 15 min 8 h -36 to ,2 x Ωxcm thixotrop PU-0585/B Structural bonding flexible black A 120% min 45 min 12 h -36 to ,2 x Ωxcm thixotrop PU-0585/T Structural bonding flexible transparent A 120% min 45 min 12 h -36 to ,2 x Ωxcm thixotrop Texture 21

22 BEST-Cleaners and Technical sprays Cleaners and Activators BEST-Cleaners For pre-treatment and degreasing of bonding surfaces and subsequent bonding with BEST adhesives BEST-Clean 1000 BEST-Clean 2000 BEST-Activators Standard unit sizes: BEST-Clean ml spray BEST-Clean ml spray, 1000 ml, 5000 ml BEST-Aktiv A, BEST-Aktiv C 200 ml spray, 1000 ml, 5000 ml Special sizes and private-label filling upon BEST-Aktiv A Activator for the pre-treatment of bonding surfaces. Ensures complete curing, respectively shortens the curing time of BEST-MK adhesives on inactive and passive surfaces BEST-Aktiv C Accelerates the curing of BEST-CA adhesives On larger gaps On porous surfaces On materials with acid surface (ph 1 6) For open applications Customer-specific special products upon 22

23 BEST-cleaners and Technical Sprays Rust Remover, Chain Spray and Leak Locatorspray BEST-Rust Remover Corrosion protection, lubricant and contact agent based on mineral oil Fields of application Maintenance, repair, service and production Water repellent, corrosion protection, excellent adhesive properties, high capillary action, excellent creep properties Standard unit sizes: BEST-Rust Remover 400 ml spray BEST-Chain Spray 400 ml spray BEST-Leak Locaterspray DVGW 400 ml spray Special sizes and private-label filling upon BEST-Chain Spray For permanent in- and outside lubrication of bearings, gear drives and worm gear units, roller- and ball bearings, o-rings, wire ropes, joints, clutches and chains Water repellent, contact sealing on distributor caps, corrosion protection, excellent adhesive properties, high capillary action, excellent creep properties, -40 C C BEST-Leak Locatorspray DVGW For maintenance and inspection of gas and compressed air systems. Blistery, aqueous surfactant dilution for the location of leaks on pipes containing gaseous media such as compressed air, natural or technical gas. Spray contains pure nitrogen, therefore completely nonflammable Customer-specific special products upon 23

24 BEST-Primers BEST-Primer C For enhancing the adhesion on polyolefines such as PP, PE, PTFE or silicones and subsequent bonding with BEST-CA instant adhesives. BEST-Primer P For enhancing the adhesion on glass, ceramics, plastics and metals and subsequent bonding with BEST-PL, BEST-MK, and BEST-MA adhesives. BEST-Primer K For enhancing the adhesion on glass, ceramics, plastics and metals and subsequent bonding with BEST-KL adhesive or epoxy resins. Standard unit sizes: 20 ml 1000ml BEST-Primer S For enhancing the adhesion on several metals, plastics and on solvent-based varnishes and subsequent bonding with BEST-Silicones. Special sizes and private-label filling upon Customer-specific special products upon 24

25 BEST-Silicone and BEST-MS Polymer BEST-Silicone Adhesive and sealing compound. Special advantages: High flexibility, achieving a permanent sealing of the bonding surface High temperature resistance due to the unchanging physical properties despite temperature fluctuations Applicable under aggressive environmental influences BEST-Silikon 301 (colourless) Designed for long lasting elastic sealing and bonding of glass, various plastics, ceramics, enamel, painted wood, acid-proof metals like alloy, chrome-plated parts, stainless steel Standard unit sizes: BEST-Silikon g tube, 340g cartridge BEST-Silikon g cartridge, 24kg hobbock BEST-MS ml cartridge Special sizes and private-label filling upon Customer-specific special products upon BEST-Silikon 401 (brown) Highly resistant to heat, it can be used in electronics for repairing or as oven adhesive. BEST-MS Polymer Elastic adhesive and sealing compound. Special advantages: Very good adhesion on various surfaces porous or smooth Gap-filling properties: polymerisation in thicker layers possible, low shrinkage Free of isocyanates, solvents and silicones Resistant to weather conditions, saltwater, humidity and chloride Good environmental sustainability BEST-MS-01 (transparent, grey, black, white) Adhesive can be painted over, moisture-curing 25

26 BEST-Contact Adhesive BEST-Contact Adhesive Solvent containing adhesive for the contact and wet bonding on basis Polychloropren For the bonding of PVC floor coverings, elastomer coverings andtextile floorings as well as elastomeres, ceramics and metals Standard unit sizes: BEST-Contact Adhesive 650g tin, 2,5kg bucket, 5,5kg bucket, 10kg bucket Properties Easy to apply High instant strength Excellent contact bonding Suitable for use over sub-floor heating systems Suitable for castor-chairs Contains solvents GISCODE S6 Special sizes and private-label filling upon Customer-specific special products upon 26

27 CONTACT US BEST-Klebstoffe GmbH & Co. KG Gewerbestraße DE Kinsau Tel.: +49 (0) 8869 / Fax: +49 (0) 8869 / info@bestklebstoffe.de Onlineshop: shop.bestklebstoffe.de Sales Purchasing Quality Management Marco Helmer Tel.: +49 (0) 8869 / Hans-Peter Schober Tel.: +49 (0) 8869 / Mirna Zeller Tel.: +49 (0) 8869 / Margit Hintz Tel.: +49 (0) 8869 / GENERAL The data and information above correspond to the current know-how of BEST-Klebstoffe GmbH & Co. KG. Our information and data have been developed from laboratory tests and extensive practical experience. They shall not release any customer from the duty to perform receiving inspections and to do test runs in view of any intended use, nor do they constitute a representation that any product will have specific properties or be suitable for any definite use. BEST-Klebstoffe GmbH & Co. KG reserves the right to chance the contents of this as necessary. 27

28 28 Notes

29 29

30 How to find us Our address: BEST-Klebstoffe GmbH & Co. KG Gewerbestraße DE Kinsau Tel.: +49 (0) Fax: +49 (0)

31 31

32 BEST-Klebstoffe GmbH & Co. KG Gewerbestraße DE Kinsau Tel.: +49 (0) Fax: +49 (0)