GypWall RAPID db Plus

Transcription

1 Metal stud housing partition system! This section includes updated information, added since it was first published in July 009. Please see the WHITE BOOK update document for details. Last updated 0/0/00 George Wimpey, Pembroke Grange, Caversham Images courtesy of Taylor Wimpey

2 0 0 R w db mins is a specialist non-loadbearing Gypframe metal stud internal wall system for use in housing. This versatile system incorporates Gyproc SoundBloc RPID linings, which provide acoustic solutions to comply with Building Regulations pproved Document E, and also provide fire and impact resistance. The system is quick to build, timber-free, and provides pre-finished service cut-outs. There are two build options 0mm stud framing without noggings, and 900mm stud framing with horizontal noggings. B Key facts Lightweight, versatile and quick to install chieves the R w 0 db Building Regulations pproved Document E requirement for internal partitions Choice of 0mm stud centres (without or 900mm centres (with Fast-track alternative to non-loadbearing timber stud GypWall GypWall RPID and RPID db Plus Satisfies BS requirements up to and including Medium Duty 0 minutes fire resistance ccommodates services through pre-cut apertures Swaged Gypframe coustud B Gypframe coustud Single layer sound-resisting linings Refer to section.. - Principles of robust design. pplications Internal wall applications, for example housing and apartments. Sector Housing partment buildings 9

3 L SPECSURE S Y S T E M System components Gypframe metal products S 0 coustud Length (swaged to accommodate 9, 9mm mid-height. 0 S 0 coustud Length 000, 00, 00mm GWR Nogging Channel Length mm 9mm Fixing and finishing products Gyproc Wafer Head Drywall Screws For Gypframe metal-to-metal fixing less than 0.mm thick ( I studs less than 0.mm thick). Gyproc Drywall Screws For fixing boards to Gypframe metal framing less than 0.mm thick ( I studs less than 0.mm thick). Gyproc Sealant Sealing air paths for optimum sound insulation. GWR Floor & Ceiling Channel ( C 0) Length 00mm Width mm Gyproc jointing materials For seamless jointing. C 0 Standard Floor & Ceiling Channel Length 00mm Width mm Gyproc edge and angle beads Protecting and enhancing board edges and corners. G Splayed ngle Length 00, 00mm Prime dimensions x mm 99 FC 0 Length Fixing Channel 00mm Thistle Board Finish or Thistle Multi-Finish To provide a plaster skim finish. or Thistle Durafinish To provide improved resistance to accidental damage. Board products Insulation products Gyproc SoundBloc RPID Thickness Width mm 900mm Isover PR 00 mm, for improved acoustic performance. Moisture resistant boards are specified in intermittent wet use areas, e.g. shower cubicles. I F E T I M E W R R N T Y lways use genuine branded British Gypsum components to qualify for SpecSure lifetime warranty 0

4 T F 0 E bgtechnical.enquiries@bpb.com Installation overview Gypframe channel is fixed to the floor, soffit and abutments. Gypframe coustuds are friction-fitted vertically at either 0mm or 900mm centres (only use Gypframe S 0 coustuds at 900mm centres) within the channel sections to form the framework. This allows for adjustment during boarding. Studs are fitted so as to all face the same way. Services Electrical and other services are normally installed after one side is boarded. Horizontal runs are routed through cut-outs in the studs. Gypframe 99 FC 0 Fixing Channel can be installed between studs to support recessed switch boxes / socket outlets. With S 0 stud framing at 900mm centres, mid-height noggings are located between studs. dditional framing is installed as required to support heavy fixtures. Gyproc SoundBloc RPID boards are screw-fixed at 00mm centres to all framing members to form the lining. Openings To satisfy a Medium Duty rating, Gypframe coustuds are sleeved with a Gypframe channel to full height either side of the door opening or, alternatively, a timber ground is fitted. For more information regarding services in, please see the Product Data Sheet TI Services in GypWall RPID db Plus, available to download from For full installation details, refer to the British Gypsum SITE BOOK, available to download from For full installation details, refer to the British Gypsum SITE BOOK, available to download from

5 Performance ( EN Refer to section - Basic principles of system design) S 0 coustuds at 900mm centres. mm Gypframe GWR mid-height nogging. Linings as in table. Table Solutions to satisfy the requirements of BS EN -: 999 S 0 coustuds at 0mm centres. Linings as in table. 0 S 0 coustuds at 0mm centres. Linings as in table. L I F E T I M E SPECSURE S Y S T E M W R R N T Y S 0 coustuds at 900mm centres. mm Gypframe GWR mid-height nogging. mm Isover PR 00. Linings as in table. S 0 coustuds at 0mm centres. mm Isover PR 00. Linings as in table. 0 S 0 coustuds at 0mm centres. mm Isover PR 00. Linings as in table. Detail Partition Board Lining Maximum partition Sound insulation Duty pprox. System thickness type thickness height R w rating weight reference mm mm mm db kg/m 0 minutes fire resistance EN SoundBloc RPID x 00 0 Medium 900 SoundBloc RPID x 00 0 Medium 900 SoundBloc RPID x 00 Medium 900 SoundBloc RPID x 00 Medium SoundBloc RPID x 00 Medium 90 0 SoundBloc RPID x 00 Medium 9 90 The maximum heights quoted are limited by the fire state field of application or by limiting deflection of L/0 at 00 Pa, whichever is the more onerous. NB The fire resistance and sound insulation performances are for imperforate partitions, walls and ceilings incorporating boards with all joints taped and filled, or skimmed according to British Gypsum s recommendations. The quoted performances are achieved only if British Gypsum components are used throughout, and the Company s fixing recommendations are strictly observed. ny variation in the specifications should be checked with British Gypsum. NBS work section K0 - Plasterboard drylinings / partitions / ceilings

6 T F 0 E bgtechnical.enquiries@bpb.com BS S 0 coustuds at 900mm centres. mm Gypframe GWR mid-height nogging. Linings as in table. Table Solutions to satisfy the requirements of BS : Part : 9 S 0 coustuds at 0mm centres. Linings as in table. 0 S 0 coustuds at 0mm centres. Linings as in table. L I F E T I M E SPECSURE S Y S T E M W R R N T Y S 0 coustuds at 900mm centres. mm Gypframe GWR mid-height nogging. mm Isover PR 00. Linings as in table. S 0 coustuds at 0mm centres. mm Isover PR 00. Linings as in table. 0 S 0 coustuds at 0mm centres. mm Isover PR 00. Linings as in table. Detail Partition Board Lining Maximum partition Sound insulation Duty pprox. System thickness type thickness height R w rating weight reference mm mm mm db kg/m 0 minutes fire resistance BS SoundBloc RPID x 00 0 Medium 900 SoundBloc RPID x 00 0 Medium 900 SoundBloc RPID x 00 Medium 900 SoundBloc RPID x 00 Medium SoundBloc RPID x 00 Medium 90 0 SoundBloc RPID x 00 Medium 9 90 Based on a limiting deflection of L/0 at 00 Pa. NB The fire resistance and sound insulation performances are for imperforate partitions, walls and ceilings incorporating boards with all joints taped and filled, or skimmed according to British Gypsum s recommendations. The quoted performances are achieved only if British Gypsum components are used throughout, and the Company s fixing recommendations are strictly observed. ny variation in the specifications should be checked with British Gypsum. NBS work section K0 - Plasterboard drylinings / partitions / ceilings

7 Design Planning - key factors The position of services should be pre-determined and their installation planned into the frame erection stage. Cavity fire barriers Gyproc SoundBloc RPID screw-fixed into the web of perimeter channels or vertical studs will provide a satisfactory closure to flame and smoke. Refer to section 0 Cavity fire barriers. Services Electrical The installation of electrical services should be carried out in accordance with BS. The cut-outs in the studs can be used for routing electrical and other small services (see GypWall CLSSIC Construction details ). Switch boxes and socket outlets can be supported from Gypframe 99 FC 0 Fixing Channel fixed horizontally between studs, or a high performance socket box detail where higher acoustic performance is required. Board finishing Refer to section Finishing systems and decorative effects. NB In intermittently damp use areas, such as around baths and shower cubicles, Gyproc SoundBloc RPID MR should be used in accordance with NHBC recommendations. Two coats of Gyproc Drywall Sealer applied to the face of standard grade plasterboards, with the edges adequately protected from moisture may also be suitable to receive a tile finish. The application of Gyproc Drywall Sealer provides surface water absorption resistance only, and does not meet the performance requirements for moisture resistant grade boards as defined in BS EN 0, type H. For more information refer to the British Gypsum SITE BOOK, available to download from Where Gypframe coustuds are used, services are routed through 0mm x mm H shaped push-outs, at the same centres as shown in GypWall CLSSIC Construction details a for conventional cut-outs. Cables should be protected by conduit, or other suitable precautions taken to prevent abrasion when they pass through the metal frame. Heating pipes Where heating pipes, particularly micro-bore systems, are to be located within the partition, it is recommended that only one pipe is passed through each aperture in the metal framework. If this cannot be accommodated for whatever reason, it may then be necessary to incorporate proprietary pipe restraining clips or other means of keeping the pipes apart to prevent vibration noise. Ducts Where a large number of electrical cables or pipes have to be accommodated, a service duct can be created by closing up the stud centres to 0mm and omitting the intermediate nogging. Electrical cables should be attached using an appropriate cable retaining device in order to satisfy the requirements of BS. Fixtures Lightweight fixtures can be made directly to the partition linings. Medium weight fixtures can be made to Gypframe 99 FC 0 Fixing Channel. Heavyweight fixtures (to BS ), such as wash basins and wall cupboards, can be fixed using Gypframe 0 FC 90 Fixing Channel. Refer to section.. Service penetrations and fixing into drywall systems. Please refer to section - Basic principles of system design for general guidance

8 T F 0 E bgtechnical.enquiries@bpb.com Construction details Head and base (900mm stud centres with horizontal Junction with masonry (900mm stud centres with horizontal 9 Junction with masonry (900mm stud centres with horizontal 9 Intermediate stud (900mm stud centres with horizontal Internal / external corner (900mm stud centres with horizontal Gyproc SoundBloc RPID Gypframe S 0 coustud Gypframe channel Gypframe GWR Nogging Channel Gyproc Sealant 9 Bulk fill with Gyproc jointing materials (where gap exceeds mm) Skirting Blockwork DriLyner BSIC wall lining system

9 T junction (900mm stud centres with horizontal Splayed angle (900mm stud centres with horizontal Wall abutment (900mm stud centres with horizontal 9 Framing intersection (900mm stud centres with horizontal 0 dditional framing for heavy fixtures Gyproc SoundBloc RPID Gypframe S 0 coustud Gypframe channel Gypframe GWR Nogging Channel Gypframe G Splayed ngle dditional framing Wash basin

10 T F 0 E bgtechnical.enquiries@bpb.com Head and base (0mm stud centres without horizontal Junction with masonry (0mm stud centres without horizontal Junction with masonry (0mm stud centres without horizontal Intermediate stud (0mm stud centres without horizontal Internal / external corner (0mm stud centres without horizontal Gyproc SoundBloc RPID Gypframe coustud Gypframe channel Gyproc Sealant Bulk fill with Gyproc jointing materials (where gap exceeds mm) Skirting Blockwork DriLyner BSIC wall lining system

11 T junction (0mm stud centres without horizontal Splayed angle (0mm stud centres without horizontal Gyproc SoundBloc RPID Gypframe coustud Gypframe channel Gypframe G Splayed ngle

12 T F 0 E bgtechnical.enquiries@bpb.com Door frame detailing to BS - Medium Duty, studs either side of door opening fully sleeved 9 Section Door frame detailing to BS - Medium Duty, timber sub-frame around door opening Section C C B B 00mm D 00mm D C Section B B C Section D D 0mm 0mm 0 Forming door head where studs either side of door opening have a timber ground fitted Snip legs Bend up 90 Bend up 90 Bend down 0 9 B Bend down 0 = depth from door head to legs of head channel B = width of formed door head Gypframe coustud fully sleeved with Gypframe channel (both sides of opening) Gypframe channel Gypframe channel cut and bent to form door head Gypframe channel cut, bent and bent back on itself to form door head ( Refer to Construction details - 0) Timber sub-frame Doorset Gypframe coustud Finished assembly fixed to Gypframe coustuds with Gyproc Wafer Head Drywall Screws 9 Mitre cuts NB Denotes location of fixings into floor. 9