scaffoldings/ coverings

Transcription

1

2 scaffoldings/ coverings 198 MDS 222 temporary covers Scaffoldings / Coverings 197

3 SCAFFOLDINGS / COVERINGS MDS MDS multidirectional scaffolding The MDS multidirectional scaffolding is the modern solution that reflects in an industrialized way all the flexibility of tube and fitting scaffolding. The rosettes, welded on the standards every cm, allow 8 connections on a single plane at various angles. In particular, the four little holes on the rosette enable ledgers and transoms to be fixed, centering them at the correct angle automatically. The four wider holes accommodate the connection of the plan and façade braces and enable the angle of alignment between the components to be adjusted within a range of 30. In addition to the constant distance between the rosettes welded to the standards a key feature of the system that ensures speed of installation is the simple and functional boltfree connection based on wedgehead. These features make assembly and dismantling extremely intuitive, easy and safe. The MDS multidirectional scaffolding is the Emmebau s system with most flexibility and highest possibilities of use even in complex situations thanks to the characteristics of quick assembly, great modularity, extreme adaptability and high load capacity. 198

4 199 Scaffoldings / Coverings

5 SCAFFOLDINGS / COVERINGS MDS Strengths: it is a modular system that consists of clever modular components there is a full range of accessories to meet any needs on site in any field no wooden elements are needed, toeboards and working planks are made by galvanized steel and no maintenance is needed MDS system has a considerably high load bearing capacity, hence needs material savings and is overall lighter than other systems to handle the light weight of the components is a big advantage where manual transportation over long distances is involved the system is simple, fast and intuitive: the installation and dismantling operations are very quick MDS structures may be used instead of any other system of shoring and supporting towers the multidirectional system represents the perfect combination between the productivity of the frame scaffolding and universal flexibility of the tube and fitting system it can be also combined with other scaffolding systems (as prefabricated frames scaffolding, increasing productivity and costefficiency a temporary aluminium guardrail is available for collective fall protection during the scaffolding erection and dismantling MDS has been tested and approved as a scaffolding system designed in several configurations, according to national and international standards the hot dip galvanizing of each component assures guarantees the longevity of the system. 200

6 spacings The typical configurations, complying with in the ministerial approval, have scaffolding bay width of 83 cm or 115 cm with bay lengths respectively up to 2 and 300 cm. The design load is 1 (maintenance) for the MDS 83 and 300 (construction) for the MDS 115, according to the approval s patterns. There are several other measures available, any reticular spatial structure can be achieved. characteristics Steel tubes steel ø 48.3 mm with wall thickness 3.2 mm for standards and 2.3 mm for diagonals and ledgers Hot dip galvanizing. Scaffoldings / Coverings 201

7 SCAFFOLDINGS / COVERINGS MDS many fields of application A wide range of components and solutions allows to create MDS structures capable of meeting all requirements in terms of design and load bearing capacity. It can be used for maintenance and construction in each sector of activity, as building construction, restoration, infrastructures, petrochemical industry, shipbuilding and aircraft production, entertainment, and many more. 202

8 possible uses straight and curved façades service scaffolding accesses and stairways for site or public use suspended and cantilevered structures birdcages and loading bays shoring structures supporting towers also for heavy loads with MDS tower mobile towers on wheels temporary structures as sheds stages and grandstands lighting and FOH towers Scaffoldings / Coverings 203

9 SCAFFOLDINGS / COVERINGS MDS MDS system configurations support tower load carrying platforms service stairs for work site structure for slab support circular scaffolding MDS structure with temporary aluminium covering 204

10 205 Scaffoldings / Coverings

11 SCAFFOLDINGS / COVERINGS MDS MDS loading platforms Specific load carrying scaffolding with staggered levels, useful to supply the different floors of the building with construction and finishing materials and various equipment, can be realized using the MDS multidirectional system. They are designed so that the load lifted by a crane is placed on the unloading platform at the level of the desired floor and then moved inward the building. It is essential to ensure that the displacement of areas is performed so that the crane can place the load without obstacle. The platforms can be carried out with a different number of areas, measures and capacities, for example may have a size of 2.x2. m with an operating load up to

12 207 Scaffoldings / Coverings

13 SCAFFOLDINGS / COVERINGS MDS MDS service stairs In order to ensure easier and safer accesses, instead of using access decks with trapdoor and rung ladder available only to workers, with MP system and some additional components and accessories different solutions of service stairs can be implemented. Using service stairs made by aluminium ramps or steel stringers with scaffolding steel decks accesses are available both for transportation of material and small equipment and for site inspections by personnel not involved in the work. Also stairways for public accesses can be achieved. MDS access stairs can be directly connected to the scaffolding or be directly anchored to the building, as independent structures. The standard bay length of the ramps is 2 cm, the other dimensions depend on the typology and its purpose; for example, the typical dimensions in plan of the MDS stair with aluminum platform are 1x2 cm and the clearance height between level is 200 cm as for the scaffolding. 208

14 A simpler solution is to build a climbing stair leaning against the façade scaffolding that uses the scaffolding floor as a landing. A service stair sized 300x5 cm and spacing of 200 cm and landings of 1x1 cm is the perfect solution to access the site by personnel with bulky equipment and and safety personnel for passage of a possible stretcher. With the MDS system it is possible to build also stairs open to the public for the civil sector (entertainment, sporting events, various events) that comply with the safety standards of the sector. Scaffoldings / Coverings 209

15 SCAFFOLDINGS / COVERINGS MDS Article N. Kg Article N. Kg MDS STANDARD SPIGOTLESS STANDARD EB EB EB1102 EB EB1101 EB EB1100 EB EB110400SS EB110300SS EB1102SS EB110200SS EB1101SS EB110100SS EB110070SS EB1100SS EB110025SS MDS BASE COLLAR EB ADJUSTABLE BASE PLATE GALVANIZED EB10133Z EB101666Z EB

16 Kg EB10160H H Ø 8 mm HOOK CONNECTION 0.6 SCAFFOLDING WHEELS EB SCAFFOLDING WHEELS EB1010 of 0 Kg EB1019 of 1000 Kg EB MDS double wedge head clamp ADJUSTABLE REINFORCED BASE PLATE GALVANIZED MDS SPIGOT WITH BOLT EB Article N. 211 Scaffoldings / Coverings EB ADJUSTABLE SWIVEL BASE GALVANIZED Kg Article N.

17 Article N. Article N. EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB VERTICAL BRACE MDS HORIZONTAL BRACE 300x200 2x x x x200 1x x x200 83x x1 2x1 200x1 180x1 1x1 115x1 100x1 83x1 300x100 2x x100 1x x x100 83x100 2x 200x 100x 300x2 300x x115 2x115 2x200 2x180 2x1 2x115 2x100 2x83 200x x x1 200x x x83 180x x x83 1x1 1x115 1x100 1x83 115x x x83 Kg Kg SCAFFOLDINGS / COVERINGS MDS

18 Article N. Kg Article N. Kg MDS LEDGER MDS TRANSOM (REINFORCED) EB EB1202 EB EB EB EB1201 EB EB EB EB EB EB1222 EB EB EB Scaffoldings / Coverings 213

19 SCAFFOLDINGS / COVERINGS MDS Article N. Kg Article N. Kg MDS BRACKET 43 MDS BRACKET 83 EB EB MDS BRACKET MDS STEEL PLANK EB MDS Bracket 115 EB MDS Bracket Brace EB1300 EB12 EB1200 EB1180 EB11 EB1115 EB1100 EB x300 33x2 33x200 33x180 33x1 33x115 33x100 33x MDS STEEL GAP COVER MDS HOT DIP GALVANIZED STEEL PLANK HG 32 EB EB1522 EB EB EB1521 EB EB EB x300 31x2 31x200 31x180 31x1 31x115 31x100 31x83 EB EB1542 EB EB EB1541 EB EB EB x300 32x2 32x200 32x180 32x1 32x115 32x100 32x filled gap 21 cm 214

20 Article N. Kg Article N. Kg MDS PLYWOOD DECK WITH LATERAL ACCESS MDS LADGER WITH GAP COVER with integrated ladder: EB15130N EB15125N without integrated ladder: EB15120N EB15115N ladder: EB EB EB1212 EB EB EB EB1211 EB EB EB MDS BOARD TRAP DOOR + STAIR ALU EB EB1512 EB x300 66x2 66x MDS GALVANIZED TOEBOARD EB EB1532 EB EB EB1531 EB EB EB x300 15x2 15x200 15x180 15x1 15x115 15x100 15x MDS PROTECTION FAN EB Scaffoldings / Coverings 215

21 SCAFFOLDINGS / COVERINGS MDS Article N. Kg Article N. Kg MDS LATTICE BEAM 0 WITH SPIGOT MDS LATTICE BEAM EB EB EB1300 EB EB1302 EB EB MDS INTERMEDIATE BASE COLLAR EB MDS CLAMPABLE ROSETTE EB MDS CLAMP WITH SWIWEL COUPLER EB MDS CLAMP WITH END COUPLER 1.6 EB

22 Article N. Kg Article N. Kg MDS UPPER STEP L INFILL MDS ALUMINUM STAIRCASE EB17325W EB17320W EB17318W EB17315W EB17311W EB17310W EB17383W EB EB EB x72x200 (A) (middle stairway) 2x72x200 (B) (handrail for stairway) 2x72x200 (C) (landing handrail) MDS LOWER STEP INFILL EB1742 EB EB EB1741 EB EB EB MDS UPPER STEP L INFILL PUBL. EB17325P EB17320P EB17318P EB17315P ADAPTER FOR WHEEL GALVANIZED EB Scaffoldings / Coverings 217

23 SCAFFOLDINGS / COVERINGS MDS Article N. Kg Article N. Kg MDS LIFTING HOOK FOR SPIGOTLESS STANDARD MDS TOE BOARD FOR STAIR EB EB x200 (A) 42.2 (stairway ramp EB sied) 2x200 (B) 16.9 (right toeboard for EB stairway) 2x200 (C) 16.9 (left toeboard for stairway) MDS ADJUSTABLE GUARDRAIL EB1722 for stages and stairs EB for stages and stairs EB1721 for stages and stairs EB for stages and stairs EB for stages and stairs EB for stages and stairs

24 Article N. Kg Article N. Kg HOLDER FOR BASE PLATE GALVANIZED EB BASE PLATE LOCK 0.63 EB ADJUSTABLE REINFORCED HEAD JACK H60 EB10260H galvanized BEAM CLAMP EB MDS STAIR GUARDRAIL OF 2X1 MDS STAIR STRINGER EB x EB x1 36 Scaffoldings / Coverings 219

25 SCAFFOLDINGS / COVERINGS MDS Article N. Kg Article N. Kg TUBE ANCHORAGE EB SCAFFOLDING TIE 30CM WITH PIN EB SCAFFOLDING TIE 60CM WITH HOOK EB10060 MDS ASSEMBLY GUARDRAIL EB EB STEEL ANCHOR PLUG CONTAINER FOR DECKS, PAINT. AND GALV EB EB1000 ø 23 [mm] (B) ø [mm] (A) EB EB100061Z 40 boards of 48 boards of boards of 48 boards of

26 Article N. Kg Article N. Kg TUBULAR PALLET EB x80x87 (H) WIRE CONTAINER 42.5 EB x80x60 (H) 54 METALLIC WIRE CONTAINER EB x100x (H) 8 Scaffoldings / Coverings 221

27 SCAFFOLDINGS / COVERINGS TEMPORARY COVERS TEMPORARY COVERS Single pitch covering system, practical and easy to be assembled, consisting of modular beam in aluminium and sheet in PVC for entertainment and events.the modular structure of the covering, which can be combined with the MDS multidirectional system, is used to fasten the lighting and sound systems and is used as a covering of the stage against the weather. The covering is lifted by a motor winch or manually in case of coverings with small dimensions. The structure with a single pitch can be cantilevered to protect tribunes, flight steps, and stages with the addition of a supplementary beam for the connection to multidirectional wall. Strengths: the main structure consists of modular aluminium beams with single pitch of 76 cm in height or TID cm in height, creating a lattice with mesh of 200x2 cm and stiffeners with quick connections diagonals. The beams have an upper guide profile for housing the PVC sheet uprights, diagonals, bracings and stiffening in 48 mm tubular aluminium with a unique quick hooking system that reduces installation time. The uprights and diagonals are placed in a lower position than the coverings to prevent irregularities in the coverage stiffening diagonals provided over the entire structure to allow a high load capacity over the entire surface front maximum size 2400 cm (or multipleof 200 cm), minimum depth 7 cm and maximum depth 2000 cm quick assembly by using pins structure lifting through 4B motorized winches sheet consisting of a filling of coated polyester in 8 g/m 2, PVC, fireproof Class 2 with reinforced perimeter curbs treated with antifreeze and with end pockets to insert the fastening and pulling pipes individual cover sheets 200 cm wide for a very quick handling the covering capacity varies depending on the size and can increase with the doubling of beams for higher capacity and different dimensions, contact the Technical Department of Emmebau. 222

28 223 Scaffoldings / Coverings

29 SCAFFOLDINGS / COVERINGS TEMPORARY COVERS Article N. Kg Article N. Kg TOP LATTICE GIRDER 330 ALUMINIUM EB EB3103 in aluminium with guiderail for PVC cloth 330x76 330x LATTICE GIRDER ALUMINIUM EB EB EB EB EB EB in aluminium with guiderail for PVC cloth 200x76 300x76 400x76 200x x x END LATTICE GIRDER 100 ALUMINIUM SEAL FOR COVERING GIRDER EB EB in aluminium with guiderail for PVC cloth 100x76 100x EB BUILDING LEDGER ALUMINIUM DOUBLE LEDGER ALUMINIUM EB EB3202 in aluminium with quick hooking coupler for span connection EB EB EB EB in aluminium with quick hooking coupler for span connection 200x 2x 200x93 2x

30 Article N. Kg Article N. Kg GUIDE 60X37 FOR PVC TARPAULIN ALUMINIUM BUILDING BRACE ALU EB EB EB EB EB3403 EB EB EB EB in aluminium with quick hooking coupler for span connection 2x x200 2x EDGE LEDGER ALU TARP TEN TUBE ALUMINIUM EB EB3232 in aluminium for cloth tension EB EB in aluminium with plugs CLAMP FOR 60X37 GUIDE GALVANIZED EB x11 recommended: n 2 clamps for art. EB n 2 clamps for art. EB n 2 clamps for art. EB n 3 clamps for art. EB n 3 clamps for art. EB3403 n 3 clamps for art. EB LATTICE GIRDER ALUMINIUM EB3420 EB3520 EB3620 EB x 520x 620x 820x Scaffoldings / Coverings 225

31 SCAFFOLDINGS / COVERINGS TEMPORARY COVERS Article N. Kg Article N. Kg TOP LEDGER ALUMINIUM TARP FIXING LEDGER ALUMINIUM EB EB EB EB SPIG 40 GREY GALVANIZED STEEL SPIG 37 CANT. ROOF GALVANIZED STEEL EB For beam connection ø 38x400 [mm] 1.84 EB x BELT RATC HET 2000 DAN LATT GIRDER 330 CANT. ROOF, ALUMINIUM EB with strap (load 2000 kg) 0.24 EB x105/

32 Article N. Kg Article N. Kg BUILEVE LOCK Ø12.5 W/SPL PIN GALVANIZED ROCKING SUPPORT GALVANIZED EB ø 12.5x83 [mm] 0.1 EB distance BUILD SUPPORT LATT GIRDER ROLL ELEM SLIDING BEAM OF 300 EB EB BUILDING ROLL ELEM. 300X300 GALVANIZED EB x300 8 LONG HINGED SPIGOT 95, GALVANIZED EB art. 010/9265 not included 67x Scaffoldings / Coverings 227

33 SCAFFOLDINGS / COVERINGS TEMPORARY COVERS Article N. Kg Article N. kg SHORT HINGED SPIGOT 67, GALV art. 010/9265 not included GABLE PVC CLOTH FOR VOVERING EB EB EB EB EB EB EB EB EB EB PVC CLOTH FOR COVERING 95x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x EB x

34 229 Scaffoldings / Coverings