CONCERTINA GRILLE TECHNICAL GUIDE

Transcription

1 CONCERTINA GRILLE TECHNICAL GUIDE RETRACTABLE SECURITY GATES PROPERTY PROTECTION SYSTEMS Commercia Retai Counter & Cabinet Domestic

2 CS11 Insurance Approved Retractabe Security Gates CS11 X Lattice S Lattice Insurance Approved The CS11 Retractabe Security Gate offers an outstanding mix of security with the eegance of the attice stye design. The CS11 is Insurance Approved design. Approva has been gained as a resut of independent testing to Loss Prevention Standard (LPS) 1175 Security Rating Cassification 1. The remainder of this section covers the background to what this approva and rating means in practica terms. REMOVING THE guesswork FROM product evauation and seection How can you know which products are truy resistant to physica attack? Appearance may suggest security, but can you be sure that a device does not contain a design faw that wi aow rapid access to the ingenious burgar? Specifiers, end-users, the poice and insurers are increasingy demanding physica security products that carry an independent stamp of compiance and quaity assurance. tested and approved to LPS 1175 The Loss Prevention Certification Board (LPCB), the UK s eading independent certification body for fire and security products, operates an approva scheme to LPS Approva and certification is based on the testing of a product s performance and the manufacturer s quaity management systems being in accordance with ISO Instaation procedures are aso defined to a high standard, ensuring the product performance is not compromised by sub-standard instaation. These speciaist products shoud ony be attached to structuray sound openings such as masonry, brick, stee or timber, moreover the type and frequency of fixings required is very precise. LPS 1175 is the ony meaningfu benchmark for gauging actua resistance in the face of a determined attack. Passing the test regime is a tough and engthy process that has been successfuy competed by the CS11. Under the stringent conditions of a comprehensive test regime, CS11 is subjected to a variety of assauts from equipment commony used for vandaism and breaking and entering, in order to ascertain its burgary resistance to physica attack. LPCB approva and certification gives assurance of the CS11 construction and consistent performance to an internationay recognised standard. Take the guesswork out of product seection - use tested and approved products from Decor Grie. THE POLICE PREFERRED SPECIFICATION As a further reinforcement of the products performance, the CS11 retractabe security gate has successfuy undergone Secured by Design evauation and is abe to dispay the Poice Preferred Specification mark. Secured by Design identifies technica standards and evauations which test the competence of security products and their resistance to crimina attack. The tests and evauations are carried out by UKAS approved test houses. CS11 Security Gates - exceent security with vision, fixed here behind a window arch. CS11 The CS11 retractabe security gate system combines a cassic appearance with effective protection, idea for home or workpace. The high security CS11 has added structura strength from a speciay designed attice assemby system using high patented grade stee inter-screws. The system can be fitted to the face or revea of a window or door aperture and can be specified in a singe or doube-sash configuration. Where a cear, safe wak through is required CS11 s bottom track can, as an optiona extra, be made to fod up. FOR Residentia premises CS11 undergoing a simuated attack test In high risk areas or simpy for added peace of mind, the CS11 is an exceent choice for home protection. With added structura strength combined with many of the features of the CS10, the CS11 offers styish, unobtrusive security aongside potentia insurance premium benefits. 2

3 Standard X Lattice Vision and ight eves are exceent - now you see it...now you don t S Lattice Option Foding Bottom Track Option Effective protection for business FOR RETAIL Premises The added security and strength of the insurance approved CS11 offers effective protection of high vaue stock in window and store dispays. Combining many of the features of the CS10 with increased structura strength and, in most cases, 4 point ocking, the CS11 has optiona foding bottom tracks to aow unrestricted access through doorways when the gates are open and compact sashes which fod neaty to the side giving unobscured visibiity of window dispays. FOR BUSINESS Premises Businesses in vunerabe ocations or premises containing vauabe equipment are often targeted by criminas. Either on an insurance company s recommendation, or to pre-empt future attack, the insurance approved CS11 is the perfect choice. Offering enhanced strength and security with minima obstruction to visibiity and natura ight even when the gates are in the cosed position, premises and staff are protected with no detraction to the appearance of the office environment. CS11 High performance security, no sacrifice in appearance Strong - Made from gavanised stee with a patented fixing system Versatie - Custom buit for amost any opening, gates fit internay in either the window revea or around the opening in either singe or doube-sash configuration Ease of use - Smooth top running operation with an option of a foding bottom track to eave doorways unobstructed Secure - Muti-point ocking (4 point in most cases, with three point on smaer gates) operating from a singe key which is out of view of potentia attackers whist remaining easy to operate from either side High quaity maintenance free finish - Suppied in high quaity white powder coated finish as standard. Optiona coours are avaiabe from stock A foating sash version is avaiabe A fixed frame version is avaiabe when retraction of the gate is not required When extra security and strength is needed, CS11 is the insurance approved option. Styish, yet deceptivey strong, unobtrusive, essentiay maintenance free and easy to use, the CS11 offers LPCB certified and approved protection. 3

4 CS10 Retractabe Security Gates CS10 AN EFFECTIVE BARRIER AND DETERRENT TO CRIME The CS10 Retractabe Security Gate system is a styish soution for protecting windows and doors. The CS10, the standard design, offers security combined with through-vision. When protection is needed, CS10 acts as a visibe deterrent to woud be intruders who, shoud they persist, wi meet with an effective barrier to entry. When not in use, CS10 is unobtrusive and compact. The sashes fod neaty to the side, out of sight behind curtains or vertica binds, with the option of fod away bottom tracks to eave openings unrestricted. Reiabe, quick and easy to use, maintenance free with muti point ocking and gavanised for corrosion resistance, the CS10 offers effective yet fexibe security. Security and deterrent Quick and easy operation. Bunching to the side, the gates are conceaed behind the curtains when open MATCHING STYLE WITH STRENGTH FOR RESIDENTIAL PREMISES Eegant good ooks with a heart of stee - the CS10 Retractabe Security Gate System combines a cassic appearance with strength, making it an idea security choice for the home. Designed to keep intruders out whie etting maximum ight in, they are perfect for patio doors, French windows and any other vunerabe ground foor doors or windows. Gates can be eft ocked with doors open to provide ventiation without oss of security. When not in use these retractabe gates are surprisingy unobtrusive. Fitted to the door or window surround, they can disappear neaty behind curtains and a pemet can be used to concea the top track. The gates offer the option to remove the bottom guide track from the opening and sashes may be hinged to swing to the side at 90 or up to 270 eaving French windows and doorways free from obstruction. (The hinge aside option requires a foding bottom track). Essentiay maintenance free, each CS10 is avaiabe in a range of powder coated coour options to compement your decor, and can aso be suppied with optiona decorative S Profie attices. Exceent ight eves when cosed VISIBLE DETERRENT, VISIBLE STOCK For Retai PREMISES Instaed inside a shop window, CS10 retractabe gates deiver an exceptionay strong yet aestheticay appeaing barrier against intruders, which aows merchandise to be dispayed safey, 24 hours a day. Products stay on dispay with unrestricted visibiity and yet remain protected. Fitted at the rear of a window dispay, retractabe gates aso effectivey create an attractive backdrop whist protecting the shop s interior. The window dispay view remains totay uninterrupted whist the gate is accessibe for easy operation. CS10 retractabe gates are safe, easy to hande, smooth and quiet to operate. They hang from a top track with a guide track at the base which, as an optiona extra, can be suppied to quicky fod up when not required, eaving shop entrances free from obstruction and aid disabed access. Being fuy retractabe, when not required, each sash can be foded neaty in the open position away from the door or window openings. Optionay, gates may be hinged to swing away from the opening at 90 or up to 270 to provide a competey cear opening (hinge aside option requires a foding bottom track). 4

5 S Lattice design Standard X Lattice Perfect for protecting vunerabe patio doors Side the sash aside for an uninterrupted view S Lattice Option Optiona Foding Bottom Track Protecting vauabe stock Retai instaations sti permit product dispay The hinge aside option ensures a totay cear view (The hinge aside option requires a foding bottom track) SECURE YET UNOBTRUSIVE For COMMERCIAL PREMISES Aowing maximum natura ight into commercia premises, retractabe gates fod to the sides of the window revea when not required and can be conceaed neaty behind vertica binds to create a secure but peasant working environment. Office premises, staff and equipment are safey protected by an exceptionay strong security barrier, manufactured from pre-gavanised roed stee with muti point ocking from a singe key. Offering security features which are particuary important on vunerabe ground foor windows and doors, the CS10 ensures exceent barrier security. Whist the top hung utra-smooth carrier system and nyon coated stee bearings aso ensure it is quick and easy to open and cose. CS10 is essentiay maintenance free and avaiabe in a broad range of optiona powder coated coours to compement corporate stying. CS10 Cear benefits Essentiay maintenance free with a wide range of coour options and a choice of attice styes, cassic appearance and convenience combine with the high eves of protection. Strong security barrier and deterrent Gavanised for corrosion resistance and powder coated Fuy retractabe system Exceent through-vision and ventiation when ocked Muti-point ocking (2 point) from a singe key Smooth running carrier system ensures quick and easy operation Custom buit for amost any opening An unimited width can be accommodated in sections A foating sash version is avaiabe A fixed frame version is avaiabe when retraction of the gate is not required Exceptionay strong, yet unobtrusive and styish, the CS10 wi transform the way you protect your property. 5

6 Specification CS11 Insurance Approved Specification GENERAL ARRANGEMENT X Lattice S Lattice 1 Top hung on nyon coated stee bearings 2 A gavanised stee construction 3 Powder coating in a range of coours 4 Fits within or around the revea 5 4 point ocking from a singe key with the ock mechanism shieded by a stee pate 6 Strong stee attice with smooth durabe finish 7 Overapped ocking profies 8 Optiona foding bottom track 9 The CS11 has a speciay designed attice assemby system utiising high grade stee screws (patented) CS11 instaation criteria The vaidity of the LPCB certification is contingent upon each security gate being instaed in accordance with the requirements of LPS Revea or face instaation Min fixing distance from edge of revea Max fixing distance from any corner Max distance between fixing A fixing heads spoied: Masonry Wood Stee 50mm 100mm 400mm 2.5 x 12s 4.0 x 12s 1.0 x M8s CS Note - A approved gates carry a abe detaiing the manufacturer, test standard and rating. CS10 Specification GENERAL ARRANGEMENT Top hung on nyon coated stee bearings 2 A gavanised stee construction 3 Powder coating in a range of coours 4 Fits within or around the revea 5 Muti-point ocking from singe key - 2 point 6 Strong stee attice with smooth durabe finish 7 Overapped ocking profies 8 Optiona foding bottom track 9 Stee riveted attice assemby system

7 overa gate width a mm BUNCH SIZES (MM) singe sash singe sash bunch b mm cear opening width c mm doube sash doube sash per bunch d mm cear opening width e mm Pease note: The cear opening widths detaied above appy to retractabe gates with fixed tracks. If the gate requires foding bottom tracks or the hinge aside option (with or without foding bottom tracks) you wi need to add 60mm per bunch to the bunch sizes above. *Pease ask for detais on widths greater than 6m security gates bunch sizes Lock post 25mm Sam post Retaining pin which protrudes from the ock post projects 30mm Note: A cear opening sizes for singe sash gates aow for the sam post. For hinge aside gates the bunch size is increased by a further 30mm per sash Note: Foding tracks with a ength of 600mm or more are suppied with a retaining pin as standard. This is ocated between 488mm and 568mm from the ground regardess of track ength. The retaining pin projects 60mm beyond the ock post when the track is owered and 30mm when raised. If the width of the gate is greater than the height check that there wi be sufficient room for the bottom track to fod up into. Uneven Sashes On doube sash gates, the sashes can be spit with the majority opening to one side, usefu where there is a preference or a imited space at one side of the aperture to accommodate the retracted sash. Sizes CS11 CS10 Weight SASH JOINT LOCK HOOKS Sizing Min Width Min Height Max Width Max Height Singe Sash Doube Sash Sizing Min Width Min Height Max Width Max Height Singe Sash * Doube Sash * kgm 2 Pickets Tapped Pates M6x12 C/sunk Bot C/sunk Pates Gate Height Range (mm) Number of ock hooks avaiabe 2 (4 optiona) 2 Fixed Pane *NOTE: CS10 can accommodate an unimited width with mutipe sashes. Sashes are made in singe pieces up to 2m wide. Larger sizes are made in sections for assemby on site, ensuring the weight of each section can be handed safey. Gates which are wider than 4m wi be suppied with the top track in two pieces, the spit wi be in the midde. Where two spit sashes meet two pickets are joined together using bots and fixing pates suppied oose (see iustration above). 7

8 Specification TERMINOLOGY The foowing ists the preferred terminoogy appied to Decor Grie gates (in Bod) and aternatives which are aso in common use: SASH Bunch / Stack / Hand TOP TRACK Top runner / Top Rai / Top Guide FOLDING TRACK Lift up / Hinge (shoud not be used -can be confused with the hinge aside option) REMOVABLE TRACK Lift Out / Lift Off HINGE ASIDE Hinging Sash / Swinging Sash / Fod Back C-SIDE FIXING FRAME C-Side / Reinforcing for Top Track / Strengthening for Top Track REVEAL FIXED Between Was / Recess FACE FIXED Surface Mounted / Pant On BI-PARTING Doube / Doube Draw / Spit KEYED ALIKE Suited / Same PICKET Upright track profies Top Track revea fix FRONT eevation Fixing Frame Top track Lattice Sash (open) Sash (cosed) Picket Bottom W Track Foding track 8 face fix FRONT eevation Low profie Bottom T Track????? Low security option SeceuroGuard 1000 ony Lock Post Picket 8

9 face fixed SIDE eevation The standard arrangement for a face fitted gate is as shown with the top track and sides face fixed and the bottom track revea fixed. When ordering pease identify ceary how each side of the frame wi be fitted. Importanty, the size of your order wi be manufactured to a height incuding fixing frame(s). face fixed SIDE eevation WITH PACKER Face Fix shown with packers to accommodate uneven surface revea fixed SIDE eevation Singe Sash Face Fixed FACE FIX pan views & Fixing detais Fixing detai FACE FIX Fixing detai Lock post Sam post Face Fixed Side Frame Doube Sash Face Fixed Face Fixed Side Frame Detai REVEAL FIX pan views & Fixing detais Singe Sash Revea Fixed Fixing detai Doube Sash Revea Fixed Revea Fixed Side Frame Detai Lattice designs High grade stee construction in X attice and S attice as an option. Standard X attice S attice option attice configurations attice increments GATE HEIGHT NUMBER OF LATTICES Lattice Increments with the options for ock position denoted by the key symbo picket quantity changeover Singe Sash Doube Sash gate bunch gate bunch width quantity width quantity

10 Specification Foating sash option FIXED sash option Bottom Running option Both the CS10 & CS11 can be suppied as a foating sash. With ocking to both sides of the assemby, the gates are abe to bunch to either side of the opening. The design faciitates easy ceaning of windows and can improve fexibiity of access. Both the CS10 & CS11 can be suppied as a fixed sash when retraction is not a requirement. This is often used as an aternative to fixed bars. The CS10 can be suppied as a bottom running version for appications where suitabe fixing points are not avaiabe at the top of the instaation or for very heavy gates. standard coour options Pease note: the coours iustrated on this page are intended as a guide ony. Reference shoud be made to an appropriate RAL or BS chart prior to ordering. Other RAL or BS coours are avaiabe, pease ask for detais. We offer the foowing coours in uness otherwise stated: White RAL 9010 Briiant White RAL 9016 Magnoia RAL 1015 Mushroom BS 06 C 33 Beige RAL 1001 Yeow RAL 1018 Goss Orange RAL 1028 Goss Pae Green RAL 6021 Goss Green RAL 6016 Green BS 14 C 39 Moss Green RAL 6005 Fir Green RAL 6009 Pae Brown RAL 8070 Brown RAL 8014 Brown BS 08 B 29 Dark Brown RAL 8022 Poppy Red BS 04 E 53 Traffic Red RAL 3020 Dark Red RAL 3011 Goss Pae Bue RAL 5015 Bue RAL 5009 Roya Bue RAL 5002 Dark Bue RAL 5003 Dark Bue RAL 5013 Off White RAL 9003 Pae Grey RAL 7047 Pae Grey BS 18 B 17 Matt Pae Grey RAL 7035 Grey BS 00 A 09 Grey RAL 9006 Grey BS 632 Dark Grey RAL 7015 Goss Back RAL 9005 NON STANDARD POWDER COATING COLOURS If you require assistance identifying or seecting a coour which does not appear on our ist of stock coours we can suppy you with a RAL or BS coour chart. 10

11 hinge aside OPTION detai CS10 Ony Maximum size for hinge aside 1800mm x 2400mm (w x h) singe sash 3600mm x 2400mm (w x h) doube sash Pease Note: CS11 is NOT avaiabe with the hinge aside option, bottom running option, spit top or bottom track or spit sashes Note: The ength of the foding track cannot exceed the height of the gate Note: Foding tracks with a ength of 600mm or more are suppied with a retaining pin as standard - see beow for detais Up to 270 Up to 270 Up to 270 Pease Note: Hinge aside gates can be suppied with either a foding or ift out bottom track but cannot be suppied with a fixed bottom track. FOLDING TRACK AND removabe track OPTION detais Singe Sash Foding Track Option Note: Foding tracks with a ength of 600mm or more are suppied with a retaining pin as standard. This is ocated between 488mm and 568mm from the ground regardess of track ength. The retaining pin projects 60mm beyond the ock post. Bi-parting Sash Foding Track Option Lift Out Bottom Track Option Note: The ength of the foding track cannot exceed the height of the gate 11