Passing services without the need of routing the walls.

Transcription

1 Data seet Metallic skirting for floor tile coverings. Metallic profiles for skirtings. Tey ave a ig mecanical resistance wit a functional, modern design. Specially recommended for office floors and raised access floors. Recommended use: Metallic skirting for floor tile coverings. Passing services witout te need of routing te walls. Residential and public use. Permanently damp environments and direct contact wit water. Outdoors, use inox Do not use in pools. Materials Anodized aluminium. V2A-type stainless steel. Substrates All substrates suitable for ceramic tiles laying. A suitable substrate for laying ceramics wit te tin-bed metod must be clean, dry, compact, wit a roug texture and flat (deviations inferior to 3 mm every 2 m of surface). It is essential tat te partition walls are flat and straigt. Features stainless / aluminium Extra-tin profile, only 2 mm wide in te top. Measures at base, 80 x 10 mm. Easy to cut wit every tile layer's everyday tools. Tere are special pieces for corners, wic avoid aving to miter te profile. R Accessible profile for passing cables (consisting of 2 pieces): Dimensions, 80 x 10 mm Easy to cut wit every tile layer's everyday tools. Tere are special pieces for corners, wic avoid aving to miter te profile.

2 Profile types anodized aluminium Aluminium profile manufactured by extrusion and anodized cemical treatment. Features: Silver Matt Wall tile Indoor / Outdoor. Te anodization treatment protects aluminium from rust and limits scratces. Protect from any abrasive element wic could scratc te exposed profile surface. Anodized aluminium profiles are sensible to te combination of dampness and alkaline products like cement mortars. It is recommended to be extremely careful wen installing tem. Avoid contact wit cement mortars as far as possible an clean any mortar stain wic affects te exposed edge of te profile as soon as possible. stainless steel Stainless steel profiles are produced by folding, so teir sape is sligtly different to tat of aluminium or brass profiles. Angles and sapes will always ave a rounded finis. Profiles made of V2A stainless steel are igly resistant bot to mecanical stress and cemical attack. Specially recommended outdoors. Features: Gloss/Brused. Wall tile Indoor / Outdoor. Te profile is supplied wit a plastic film protecting it during installation. Once te profile installed, peel off te film wit a cutter. Not recommended for use in pools or any oter use in direct contact wit concentrated cemicals. In any case, we recommend you perform a previous test to ceck its suitability. Instructions for use Coose te profile according to te final use of te skirting. Clean te perimetral joint between ceramic flooring and partition walls and seal it wit an elastic putty bead. Ceck tat te walls are flat and straigt. Correct deviations. Keep te substrate free of any element wic could compromise te bonding of te profile. Apply a bead of type p-404 polyuretane putty and bond te profile. Place te special pieces for corners and trims te same way as te profile. Apply putty on te top of te profile and paint. Before sealing te tiling joints, ceck tat te grouting material cosen does not scratc nor cemically alters te profile surface. If it does, cover te profile wit protective tape. Never use metallic tools or abrasive elements wic can scratc te profile surface. Cut te profile wit a and saw or wit a circular saw wit a suitable disc. Be extremely cautious wen cutting stainless steel profiles.

3 Cleaning and maintenance Tese profiles do not need cleaning and maintenance different from te tiles in wic tey are installed. Use neutral cleaning products. Do not use products containing ydrocloric or ydrofluoric acid. In any case, we recommend you perform a previous test before use. Do not use abrasive or metallic elements wic can scratc te profile surface. Data Seet Conditions Tis is not a finised product tecnical seet. It belongs to a product wic, togeter wit oters, is te base of a ceramic tile laying system wit wic professionals perform teir job. Instructions in tis tecnical seet ave been written based on our experience and tecnical expertise, but tey ave to be considered as general recommendations, wic togeter wit tose for te rest of te products in te system, elp te professionals in teir job. As it is not possible to know all te features and conditions of a building job, professionals must consider it and, if deemed appropriate, perform a previous test to confirm weter te product is suitable for te job. Specially recommended in applications wic imply mecanical stresses or cemical reactions not described in tis tecnical seet. Te tecnical seet cannot reflect all te applications and conditions entailed in te use of a material, so, in situations not described in tis seet, we recommend to perform a previous test and refer to our tecnical department. Tis seet as been updated in January, 2013.

4 stainless steel gloss stainless steel brused aluminium R aluminium

5 stainless Stainless steel B Gloss 80 B Brused 80 Stainless steel corner B Brused outer 80 B Brused inner 80 aluminium Anodized aluminium B Silver 80 Special pieces B Profile joining piece 80 B Rigt trim 80 B Left trim 80 Pro-plint corner B Inner 80 B Outer 80 aluminium R R PVC cap set R PVC outer angle R PVC inner angle R Anodized aluminium B Base 80 B Top 80 R consists of a base and a top profile. Pro-plint R corner B Outer 80 B Internal 80 Special pieces B Cap set 80 Includes rigt and left caps. profile lengt: 2500 mm R profile lengt: 2000 mm Minimum packaging: 10 profiles butec building tecnologies, S.A. Carretera Villarreal - Puebla de Arenoso (cv-20) km 2, Villarreal - Castellón - España. P.O. Box: Telepone (+ 34) Fax (+ 34) butec@butec.es - ttp://