HX Series Anaerobic Adhesives

Transcription

1 HENGXIN CHEMICAL INDUSTRY CO LTD HX Series Anaerobic Adhesives Thread Locking Thread Sealing Retaining Compounds

2 Manufacturer & Exporter ZHUHAI HENGXIN CHEMICAL INDUSTRY CO., LTD EVERGROWING IMP & EXP CO., LTD We are one of the leading Anaerobic Adhesives manufacturer in China, owns powerful technology support, complete research and lab condition, stable production process, reliable test method and perfect after-sale service system, main products include thread locker, pipeline thread sealants and assemble retaining compounds etc... HX series anaerobic adhesives. HX series adhesives have got the SGS certificate. some of products got the qualified water quality testing report. HX series adhesives are widely apply to automobile, motorcycle, machine, gas engine, rock oil, metallurgy, mine, building materials, textile, aviation and spaceflight etc... Approvals For further technical information, please or visits us on the web at:

3 HX186 Thread Sealant HX186 Hydraulic / Pneumatic Sealant, Oil Resistant High viscosity, Medium strength. Excellence Locking liquid / gas pipeline system. No corrosion. Can be used on threads with light oil. Typical Application: Ideal for sealing and locking hydraulic and pneumatic system, refrigeration thread, pipe radiator and under M80 tapered thread. Hot Sell PROPERTIES CHART Product No. Color Viscosity (mpa. s) Fixture Time (min) Full Cure Time (h) Gap Fill (mm) Break Fixture/Full Cure Time (min/hr) Temperature Range ( o C) Thixotropic HX186 Brown / No PROPERTIES CHART HX340 Retaining Compound HX340 - General purpose, Large Gap Repairing General purpose, high strength, medium viscosity. Ideal for gap under 0.1mm diameter clearance, replace press fits, corrosion resistance. Typical application: Ideal for retaining hole/shafts assemblies such as :belt pulley on shafts, gear, rotor, key, keyway, bearing, sleeve etc... Product No. Color Viscosity (mpa. s) Fixture Time (min) Full Cure Time (h) prevail Gap Fill (mm) Shear Strength (Mpa) Temperature Range ( o C) Thixotropic HX340 Brown No For further technical information or order, please china.simon@yahoo.com.cn Msn: simonlee-929@hotmail.com

4 HENGXIN CHEMICAL INDUSTRY CO LTD Thread Locking HX anaerobic thread locker and sealants become thermosetting plastics with different strengths after curing, prevent loosening from shock and vibration, and stop rust and corrosion of threaded metal fasteners. HX offers removable to permanent thread sizes and conditions. Speciality Single component without any solvent, cure on room temperature. Totally fill in the thread gap. Controlled lubricity for accurate clamp loads. Wide acceptance in a range of applications cater into different lock strength. Parts can be separated by hand tools, easy to eliminate.

5 Thread Locking HX Thread Locker Series HX242- Medium Strength General purpose, Medium strength thixotropic viscosity, disassembly with hand tools. Used for locking and sealing of under M20 thread corrosion resistant. Typical application: locking of thread. HX271 High Strength High strength medium viscosity Used for permanent locking and sealing of under M36 thread fasteners, corrosion resistant. Typical application: Locking of studs such as cylinder liner studs. HX243- Oil Tolerant / Medium Strength Medium strength medium viscosity threadlocker with good oil tolerance. Typical application: locking and sealing of under M20 HX290 Wicking Grade Medium strength low viscosity threadlocker for pre-assembles bolts up to M10. Penetrate threads by capillary action. Secure set screws and other assemblies after setting are completed Typical application: Seals welds and porous metal parts, protects threads from rust and corrosion. HX277 Ultrahigh Strength Superior high strength, high viscosity, good chemical resistant, permanent locking, disassemble at heated. Used for locking and sealing of under M36 thread fasteners, corrosion resistant. Typical application: Removable with heat and hand tools. HX268 High Strength High strength medium viscosity, Used for locking and sealing of under M36 valve, corrosion resistant. Typical application: locking and sealing larger valves.

6 Thread Locking HX Thread Locker -- HX200 Series PROPERTIES CHART Product No. Color Viscosity (mpa. s) Fixture Time (min) Full Cure Time (h) Prevail Break Gap Fill (mm) Temperature Range ( o C) Thixotropic HX242 Blue Yes HX243 Blue Yes HX268 Brown No HX271 Red No HX277 Red No HX290 Green No Package: 50g / Bottle Package: 250g / Bottle Package: 1000g / Bottle Notes: Viscosity value: The value can be changed by using different testing measures an at differ ambit. Cure Speed: It will be affected by substrate, surface finish and temperature. : Applied on M10 steel nuts & bolt free of grease, after 24 h. All the above notes are suitable for date of the directions. SEALANTS DEMANDED Sealants demanded for 1000 pieces (bolt and nut) each 5 thread Diameter M6 M8 M10 M12 M14 M16 M20 Manual Dispensing 31g 47g 85g 156g 210g 257g 392g Automatic Dispensing 18g 34g 54g 105g 130g 140g 246g

7 EVERGROWING IMP&EXP CO LTD Thread Sealing Speciality Single component without any solvent, cure on room temperature. 100% wholly fill the pipe thread gap. Not contaminate the sealed mediums, not block pipeline. With lubricative ability to prevent thread unloosed. Easy to install, disassemble and eliminate. Resistant to most chemicals, vibration and aging. HX anaerobic thread sealants seal and secure metal pipes and fittings, hardening instantly to prevent leakage and rust. When fully cured, they seal to the burst strength of most piping systems. A good replacement of traditional sealing twine, oil or belt.

8 Thread Sealing HX Thread Sealant -- HX500 Series HX186 Thread Sealant General all-purpose TYPE HX186 Hydraulic / Pneumatic Sealant, Oil Resistant High viscosity, Medium strength. Excellence Locking liquid / gas pipeline system. No corrosion. Can be used on threads with light oil. Typical Application: Ideal for sealing and locking hydraulic and pneumatic system, refrigeration thread, pipe radiator and under M80 tapered thread. PROPERTIES CHART Product No. Color Viscosity (mpa. s) Fixture Time (min) Full Cure Time (h) Gap Fill (mm) Break Fixture/Full Cure Time (min/hr) Temperature Range ( o C) Thixotropic HX186 Brown / No Package: 50g / Bottle Package: 250g / Bottle Package: 1000g / Bottle HX567 Package: 50g/ Bottle Package: 300g / Cartridge Notes: All the above products are anaerobic pipe thread sealant, it is not recommended for use in pure oxygen and / or oxygen rich system, and should careful if used in plastic pipes. SEALANTS DEMANDED Sealants demanded for 1000 pieces (for each 5 thread) Pipe Diameter (Inch) 1/8 1/4 3/8 1/2 3/4 1 Manual Dispensing 49g 72g 110g 144g 298g 535g Automatic Dispensing 30g 52g 72g 106g 222g 445g For further technical information and product availability, please china.simon@yahoo.com.cn simon@adhesives.net.cn or visits us on the web at:

9 HENGXIN CHEMICAL INDUSTRY CO LTD Retaining Compounds Speciality Single component without any solvent, cure on room temperature. 100% filling gap. Easy to assemble. Resistant to most chemicals, vibration and aging HX anaerobic retaining compound sealants bond non - threaded, cylindrical metal assemblies. Fill the inner voids in close - fitting press fits, keyways, and splines. Mount bearing and bushing, and make press fits even stronger.

10 Retaining Compounds HX Retaining Compound -- HX600 Series HX340 Retaining Compound General all-purpose TYPE HX340 - General purpose, Large Gap Repairing General purpose, high strength, medium viscosity. Ideal for gap under 0.1mm diameter clearance, replace press fits, corrosion resistance. Typical application: Ideal for retaining hole/ shafts assemblies such as :belt pulley on shafts, gear, rotor, key, keyway, bearing, sleeve etc... HX638 - Large Gap Repairing High strength, medium viscosity, ideal for gap under 0.25mm diameter clearance, corrosion resistant. Used for continuous working tem 150 Typical application: Used for repairing heavily worn hole/shaft assemblies. HX609 - Low viscosity / General purpose General purpose, high strength, low viscosity. Ideal for gap up to 0.1mm diameter clearance, corrosion resistant. Improves press fits strength, repair worn hole/shaft assemblies. Typical application:used for retaining key, shaft, bearing, little electric motor rotor shaft, sleeve. And rapidly repairs fretting hole/shaft assemblies. HX680 - General purpose / High strength General purpose, high strength, medium viscosity. Ideal for gap under 0.25mm diameter clearance, replace press fits, corrosion resistance. Typical application: Ideal for retaining hole/ shafts assemblies such as :belt pulley on shafts, gear, rotor, bearing, sleeve. Product No. Color Viscosity (mpa. s) Fixture Time (min) Full Cure Time (h) Prevail Gap Fill (mm) Shear Strength (Mpa) Temperature Range ( o C) Thixotropic HX340 Brown No HX609 Green No HX638 Green Yes HX680 Green Yes Package: 50g / Bottle Package: 250g / Bottle Package: 1000g / Bottle Notes: Shear strength: Seal hole/shaft assemblies free of grease, test after 24hr.(Fit parts size: 12.5mm, Gap: 0.05mm) For further technical information, please china.simon@yahoo.com.cn simon@adhesives.net.cn or visits us on the web at: Address: Rm 418,Linhai Building,Shihua Rd JiDa area ZhuHai GuangDong China Tel: Fax: Mobile: Contact Person: Simon Lee