ESSERGULLY. Safe conventional drainage. Gully systems for flat roofs, balconies and terraces

Size: px

Start display at page:

Download "ESSERGULLY. Safe conventional drainage. Gully systems for flat roofs, balconies and terraces"

Brandon Warner
5 years ago
Views:

1 2017 ESSERGULLY Safe conventional drainage Gully systems for flat roofs, balconies and terraces

2 ESSERGULLY The system for safe conventional drainage The tried and trusted system for the internal drainage of flat roofs is gravity drainage.

The essergully system is the optimal programme for the purpose flexible, reliable and long-lasting.

Our gully systems are tested by LGA Bayern (Bavarian State Trade Institute) in accordance with DIN EN 1253.

material of polyurethane integral foam connection to the roof membrane by a foamed-in connecting membrane or alternative bolt flange optionally as heated gullies (24 V or 230 V)

2 2 ESSERGULLY The system for safe conventional drainage The tried and trusted system for the internal drainage of flat roofs is gravity drainage. This is a conventional system that drains flat roofs via roof gullies and an inclined pipeline system. It is regulated by DIN EN Part 3 and DIN 1986 Part 100. The essergully system is the optimal programme for the purpose flexible, reliable and long-lasting. Combining visual appeal with convincing functionality, different variants and accessories permit ideal adaptation to all kinds of flat roofs, balconies and terraces. Our gully systems are tested by LGA Bayern (Bavarian State Trade Institute) in accordance with DIN EN It makes no difference whether you re planning vertical or horizontal drainpipes essergully always fits: 4 vertical and 4 horizontal gullies filled with heat-insulating gully material of polyurethane integral foam connection to the roof membrane by a foamed-in connecting membrane or alternative bolt flange optionally as heated gullies (24 V or 230 V) matching s for unventilated flat roofs matching accumulation element for emergency drainage in accordance with DIN accessory programme with terrace kit, freeze warning control unit with thermostat and renovation gullies Unventilated flat roofs: essergully vertical or horizontal + Ventilated flat roofs: essergully horizontal Balconies and terraces: essergully vertical or horizontal + + terrace kit

h b h ESSERGULLY Vertical and horizontal, heat-insulated, with gravel trap 3 400 126,5 160 400 126,5 92,5 d Nominal sizes, dimensions d Nominal sizes, dimensions DN d/mm h/mm 70 75 230 100 110 245

DN d/mm h/mm b/mm 50 50 86 62 70 75 115 77 100 110 147 92 125 * 110 147 92 * tube Required recess measuring 200 mm or 200 x 200 mm.

3 h b h ESSERGULLY Vertical and horizontal, heat-insulated, with gravel trap , ,5 92,5 d Nominal sizes, dimensions d Nominal sizes, dimensions DN d/mm h/mm * * tube Required recess measuring 200 mm or 200 x 200 mm. DN d/mm h/mm b/mm * * tube Required recess measuring 200 mm or 200 x 200 mm. roof membrane made of bitumen, PVC, ECB, FPO, EPDM roof membrane made of bitumen, PVC, ECB, FPO, EPDM and heating (24 V or 230 V) with bolt flange with bolt flange and heating (24 V or 230 V) roof membrane made of bitumen, PVC, ECB, FPO, EPDM roof membrane made of bitumen, PVC, ECB, FPO, EPDM and heating (24 V or 230 V) with bolt flange with bolt flange and heating (24 V or 230 V) integrated intake ring secures the position of the sealing ring and the arrested attachment of the gravel trap firmly foamed-in connecting membrane made of bitumen, PVC, ECB, FPO or EPDM (other connecting membranes can be delivered upon request) alternative roof membrane connection by bolt flange fully heat-insulated gully body of polyurethane integral foam optional as heated gully (24 V or 230 V) very good cost-performance ratio Drainage volume according to DIN EN 1253 in l/s Version DN Accumulation height (mm) Requirement (l/s) vertical * horizontal *To comply with EN , an is required.

205 4 ESSERGULLY EXPANSION ELEMENT Heat-insulated, with sealing ring 400 126,5 essergully 110 125 Dimensions in mm infinitely variable height

integrated inlet ring arrests the fixed attachment of the gravel trap firmly foamed-in connecting membrane made of bitumen, PVC, ECB, FPO or

gully body of polyurethane integral foam very good price-performance ratio 6 16 cm roofing membrane * tube 16 24 cm * roofing membrane 6 16 cm

4 205 4 ESSERGULLY EXPANSION ELEMENT Heat-insulated, with sealing ring ,5 essergully Dimensions in mm infinitely variable height adjustment from 6 to 24 cm to bridge different heat insulation thicknesses backflow-proof transition to basic gully by special sealing ring integrated inlet ring arrests the fixed attachment of the gravel trap firmly foamed-in connecting membrane made of bitumen, PVC, ECB, FPO or EPDM (further connecting membranes can be delivered on request) alternative roof membrane connection through bolt flange fully heat-insulated gully body of polyurethane integral foam very good price-performance ratio 6 16 cm roofing membrane * tube cm * roofing membrane 6 16 cm with bolt flange cm * with bolt flange gravel trap sealing ring essergully horizontal essergully vertical Installation example in unventilated flat roof.

ESSERGULLY ACCUMULATION ELEMENT For emergency drainage, with gravel trap and sealing ring 5 254 165,5 118 140 Dimensions in mm simple expansion of essergullys, vertical or horizontal, for emergency

drainage through specially developed form safety through quality testing by TÜV Rhineland technical auditors very good price-performance ratio Installation example with downpipe vertical.

To prevent rainwater from entering the emergency drains even during normal rain, they are installed with a defined accumulation level.

The emergency drainage is therefore set at an accumulation height of 35 mm. The accumulation element enables all essergully systems to be expanded to an emergency overflow.

5 ESSERGULLY ACCUMULATION ELEMENT For emergency drainage, with gravel trap and sealing ring , Dimensions in mm simple expansion of essergullys, vertical or horizontal, for emergency drainage accumulated height is infinitely variable from 35 to 100 cm by threaded rods backflow-proof transition to basic gully by special sealing ring basic body of polypropylene high-performance drainage through specially developed form safety through quality testing by TÜV Rhineland technical auditors very good price-performance ratio Installation example with downpipe vertical. The DIN standard requires a main and an emergency water drainage for all flat roofs. The emergency drainage must start up automatically whenever the main drainage unit is overburdened. To prevent rainwater from entering the emergency drains even during normal rain, they are installed with a defined accumulation level. The accumulation level follows the accumulation height of the main drainage as determined by the expert planner. This usually amounts to 35 mm. The emergency drainage is therefore set at an accumulation height of 35 mm. The accumulation element enables all essergully systems to be expanded to an emergency overflow. The accumulation element is simply inserted into the inlet cup of the gully. The accompanying sealing ring ensures backflow-proof sealing. The desired accumulation height can be infinitely adjusted between 35 and 100 mm with the aid of the adjustable threaded feet. Drainage volume according to DIN EN 1253 in l/s Accumulation level via accumulation element (mm) Downpipe DN vertical ) horizontal ) ) essergully DN 100 tube DN 125 2) essergully DN 125 tube DN 150

26 2 6 ESSERGULLY RENOVATION With gravel trap A B C D E F Renovation gully 95 125

5 146 E 95 125 160 F 200 259 200 Dimensions in mm Renovation gully Inside diameter

ventilated and unventilated flat roofs firmly foamed-in connection membrane made of

without additional heat insulation very good price-performance ratio Connecting

internal diameter of 125 to 250 mm terrace kit gravel trap 60 160 mm or 160 240 mm

6 ESSERGULLY RENOVATION With gravel trap A B C D E F Renovation gully A B C D E F Dimensions in mm Renovation gully Inside diameter of old gully mm mm mm renovation solution for ventilated and unventilated flat roofs firmly foamed-in connection membrane made of bitumen or PVC gully body made of polyurethane integral foam can also be applied without additional heat insulation very good price-performance ratio Connecting renovation element element connecting to building-side old gully suitable for internal diameter of 125 to 250 mm terrace kit gravel trap mm or mm 60 mm heat insulation must be part of buildingside renovation package connecting renovation element existing roof gully 100

78 ESSERGULLY ACCESSORIES Terrace kit 7 185 195 113 155 Dimensions in mm 49 5

various covering thicknesses from 33 to 106 mm 3-part set consisting of

automatically controlled ice warning system for essergully with 24 V heating

and thermostatic switch thermostat is in position protected against sun and

gullies or 10 essergully horizontal gullies (parallel circuit) is possible

sieve vertical can be delivered in nominal sizes 50 and 70 mm, vertical or

body made of polyurethane integral foam 60 mm top section with end grid for

7 78 ESSERGULLY ACCESSORIES Terrace kit Dimensions in mm 49 5 matches essergully, vertical or horizontal, and suitable for unventilated flat roofs (e.g. reinforced concrete ceilings) building kit can be flexibly adjusted to various covering thicknesses from 33 to 106 mm 3-part set consisting of corrosion-proof die-cast aluminium Ice-monitoring unit and thermostat automatically controlled ice warning system for essergully with 24 V heating control system via central supply and control unit with integral transformer and thermostatic switch thermostat is in position protected against sun and snow operating range from +5 C to -5 C control of up to 7 essergully vertical gullies or 10 essergully horizontal gullies (parallel circuit) is possible from a central unit ESSERGULLY BALCONY For balcony, terrace or garage, with sieve vertical can be delivered in nominal sizes 50 and 70 mm, vertical or horizontal firmly foamed-in connecting membrane made of bitumen or PVC gully body made of polyurethane integral foam 60 mm top section with end grid for coverings on balconies, terraces or garages height compensation piece to bridge additional covering thicknesses up to 95 mm horizontal top section height compensation piece

8 ESSERTEC GmbH Berghäuschensweg Neuss, Germany P.O. Box Neuss, Germany Phone Fax M E M B E R O F Subject to technical changes! Brinkmann GmbH Marke. Menschen. Kommunikation.