GUMMY SYSTEM RUBBER SOUNDPROOFING ACCESSORIES

Transcription

1 GUMMY SYSTEM RUBBER SOUNDPROOFING ACCESSORIES

2 GUMMY SYSTEM 52 CONNECTING SYSTEMS GUMMY SYSTEM RUBBER SOUNDPROOFING ACCESSORIES Compliance with CE marking mandated by law on the product, as per European standard EN (determination of allowable load for suspended ceilings with load-bearing capacity); Marking test carried out on the complete kit of Metalstampi profiles and accessories (greater guarantee on allowed load-bearing values); Superior sound-proofing properties thanks to the thermoplastic rubber membrane that acts as a buffer. Guarantees mechanical discontinuity between the existing surface and the new work.

3 13mm 27mm 100mm 40mm 53 GUMMY SYSTEM Ø6 Wall / Ceiling Wall plug 5mm Surface Blue rubber element Ø24 mm Metal washer Ø6 x 24mm GS00521 Bracket 49x100x1 PC BA C/27/48/27 BA stud Sound proofing product 48

4 GUMMY SYSTEM 54 GUMMY SYSTEM SPACER CONNECTOR Product manufactured out of galvanized steel 1 mm thick in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proof suspended ceilings and/or double walls, with a spacing of 10 mm between the surface and the metal stud. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The connector snaps into the metal framing, by pressing the product against the metal stud. GS00500 BA GS00500 BS spacer connector t 1 d suspended ceiling double wall 50 pcs C/27/48/27 BA BS washer Ø6x24

5 55 GUMMY SYSTEM GUMMY SYSTEM L-BRACKET Product manufactured out of galvanized steel 1 mm thick in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proof suspended ceilings and/or double walls, with a spacing of 10 mm between the surface and the metal stud. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The connector snaps into the metal framing, by pressing the product against the metal stud. GS00502 L-bracket d 65 t double wall 50 pcs 60x35 washer Ø6x24

6 GUMMY SYSTEM 56 GS00503 L-bracket d 125 t double wall 50 pcs 120x35 washer Ø6x24

7 57 GUMMY SYSTEM GUMMY SYSTEM BRACKET 50-60x120 Product manufactured out of galvanized steel 1 mm thick in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proof double walls, with spacing between wall and base of metal stud from 35 mm to 125 mm. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The bracket may be screwed in the required position onto the members of the metal framing using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall. GS00508 adjustable bracket d 125 t double wall 50 pcs 50x120 washer Ø6x24

8 GUMMY SYSTEM 58 GS00507 adjustable bracket d 125 t double wall 50 pcs 60x120 washer Ø6x24

9 59 GUMMY SYSTEM GUMMY SYSTEM HANGER Ø3.9 MM 90 BEND Product manufactured out of galvanized steel wire 3.9 mm in diameter, in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proof suspended ceilings. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The accessory is slipped into the spring connectors to obtain the desired height; it is fastened to the ceiling by means of a metal plug inserted into the eyelet bent at 90 and featuring a 6-mm inner diameter. hanger Ø 3.9 Ø 3.9 suspended ceiling 50 pcs GS00510 L GS00509 L GS00511 L GS00512 L washer Ø6x24

10 GUMMY SYSTEM 60 GUMMY SYSTEM ADJUSTABLE UNIVERSAL BRACKET 50x Product manufactured out of galvanized steel 0.9 mm thick in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proof double walls, with spacing between wall and base of metal stud from 40 mm to 100 mm. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The bracket may be screwed onto the members of the metal framing at the established height using structural screws. adjustable universal bracket t 0.9 double wall 50 pcs GS x GS x GS x washer Ø6x24

11 61 GUMMY SYSTEM GUMMY SYSTEM CONNECTION BRACKET 60x Product manufactured out of galvanized steel 1.5 mm thick in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of connected sound-proof double partition walls, with an airspace in the metal frame of 225 mm and 385 mm. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The bracket may be screwed in the required position onto the members of the metal framing using structural screws. connection bracket t 1.5 connect double wall metal frames 20 pcs GS x GS x

12 GUMMY SYSTEM 62 GUMMY SYSTEM BRACKET 48x50/100/150/200 Product manufactured out of galvanized steel 1 mm thick in compliance with EN and EN standards, coupled with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proofed double walls and dropped ceilings, with spacing between wall and base of metal framing from 55 mm to 205 mm. The system ensures mechanical discontinuity between the accessory and the surface it is fastened to. The bracket may be screwed onto the members of the metal framing at the established height using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall. 48 mm adjustable bracket d 55/105/155/205 t 1 suspended ceiling double wall GS x pcs GS x pcs GS x pcs GS x pcs custom lengths available upon request washer Ø6x24

13 63 GUMMY SYSTEM GUMMY SYSTEM BRACKET 30x50/100/150/200 Product manufactured out of galvanized steel 1 mm thick in compliance with EN and EN standards, combined with a thermoplastic rubber membrane complying with UNI 4916, UNI 6065 and UNI standards, to be used in the construction of sound-proofed double walls and dropped ceilings, with spacing between wall and base of metal stud from 55 mm to 205 mm. The system ensures a mechanical interruption between the accessory and the surface it is fastened to. The bracket may be screwed onto the members of the metal framing at the established height using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall. 30 mm adjustable bracket d 55/105/155/205 t 1 suspended ceiling double wall GS x pcs GS x pcs GS x pcs GS x pcs custom lengths available upon request washer Ø6x24

14 IMPORTANT RECOMMENDATIONS FOR USING AND STORING PRODUCTS CE Marking Please note that each product is part of a hanging/connection kit, to connect to the upper anchoring system and to the supporting element in dry construction systems for use inside buildings. The various components are identified in the catalogue and price list with the CE logo. Each product has a Declaration of Performance (DOP). Fire rating: class A1. Durability: class B (Components of a building exposed to variable relative humidity up to 90% and to variable temperatures up to 30 C but with no exposure to corrosive pollution agents, except for products in class C5-M). Recommendations for storing metal framing elements Store packages in a covered area with a relatively dry atmosphere and as constant a temperature as possible, to avoid condensation that could consume the passivation coat protecting the galvanized surface. In case of outdoor storage (discouraged), please cover so as to ensure perfect protection of the material against adverse weather conditions (rain, fog, snow), making sure to store the packages in a slightly inclined position. The cover must however ensure sufficient airflow (the two surfaces must not be in direct contact) so that moisture does not settle and create condensation.