ROOFING AND BUILDING MATERIALS

Transcription

1 ROOFING AND BUILDING MATERIALS Roofing and Building Materials

2 Product Overview Flat Roofs Fibre glass material GL-S 120 Polyester fleece PVh Geotextile PES plus Vapour barrier foil 3 Geotextile PES 5 vliepatherm PAL vliepatherm AL-SK vliepatherm protect pro SK Pitched Roofs 6 vliepaspan 120 UD vliepaspan without NSK 7 vliepaspan with NSK vliepavap 130 PP-AL with NSK vliepavap PP with NSK Adhesive Technology 8 Sealing tape NKB/NKB 1S Sealing tape BKB 10 Ridge sealing tape 135 Nail sealing tape NDB 1S 9 Universaltape Repair tape AL 1S Nail sealing tape NDB Seam tape NSKB 1S Adhesive tape VKB vliepabond cartridge adhesive Solvent welding agent THF vliepapur roof adhesive Building Materials Fibre glass material GUA 60 Fibre glass material GL-S 75 AV / A2 11 Wool felt board WFP

3 Roofing Materials for Flat Roofs Fibre glass material GL-S 120 * Fibre glass material made out of textile glass fibres Designation Fire performance Colour Weight Roll width Roll length GL-S 120* GL-S 120 A2* DIN A2 white 120 g / m m 100 m white 120 g / m m 100 m Separating/fire protection layer (A2) for the sealing of flat roofs between polystyrene and plastic membranes to avoid plasticiser migration. Drillproof. Polyester fleece PVh 300 * Needle-punched nonwoven material made out of polyester Designation Fire performance Colour Weight Roll width Roll length PVh * -d2 white 300 g / m m 50 m PVh DIN d2 white 300 g / m 2 +/-10% 2.00 m 50 m PVh * -d2 Light green 300 g / m m 50 m Separating/protective layer for the renovation of flat roofs with mechanical fastening, as well as for gravel roofs and as a separating/protective layer for installation beneath sealing foils to prevent damage. Rotproof, drillproof Geotextile PES Needle-punched nonwoven material made out of polyester Designation Weight Fire performance Colour Roll width Roll length PES g / m 2 Class F PES g / m 2 Class F PES g / m 2 Class F PES g / m 2 Class F PES g / m 2 Class F PES g / m 2 Class F multicolour multicolour multicolour multicolour multicolour multicolour 2.00 m 50 m 2.00 m 50 m 2.00 m 50 m 2.00 m 50 m 2.00 m 25 m 2.00 m 15 m Protection, storage and drainage mat for green roofs/gravel roofs. Protective layer to prevent erosion and relocation in water engineering: pond liners, swimming pool construction. Protective layer for embankment, platform and equestrian centre construction, as well as for installation beneath landfill sealing. Shelf life in the ground: A shelf life of at least 5 years at a ph-value of 4-9 and a ground temperature of 25 C.. 3

4 Roofing Materials for Flat Roofs Geotextile PES plus Needle-punched nonwoven material made out of polyester. CE marking EN 13249, 13250, 13251, 13252, 13253, 13254, 13255, 13257, 13265, Designation Fire performance GRK class Colour Weight Roll width Roll length PES grey 120 g / m m 100 m PES 150 PES 200 PES grey 150 g / m m 4.40 m 3+ grey 200 g / m m 4.40 m 4 grey 250 g / m m 4.40 m 100 m 100 m 100 m PES grey 340 g / m m 100 m Filtering, reinforcing and separating purposes in road construction and other traffic areas, earthworks and foundations, as well as in retaining structures for drainage systems, erosion protection systems (coastal protection) and sewer construction. Durability in natural soils of at least 25 years. Filtering, reinforcing and separating purposes for traffic areas, earthworks and foundations for drainage systems. Erosion protection systems for retention basins and dams, sewer construction and the disposal of solid waste. Vapour barrier foil * Special polyethylene film, coloured blue, CE marking EN SD value Designation Fire performance Colour Thickness Roll width Roll length PE 016 blue > 120 m 160 µ 4.00 m 25 m PE 020* blue > 100 m > 250 m 200 µ 4.00 m 6.00 m 25 m PE 025* blue > 120 m > 180 m 250 µ 4.00 m 25 m PE 040* blue > 200 m > 380 m 400 µ 4.00 m 25 m Vapour barrier foil for flat and pitched roofs subject to low physical stresses on the building structure. 4

5 Roofing Materials for Flat Roofs * Aluminium composite foil, CE marking EN vliepatherm PAL Designation Fire performance Colour SD value Weight Roll width Roll length vliepatherm PAL 15 / 30* silver > m approx. 105 g / m m 100 m Diffusion tight vapour barrier foil for flat and pitched roofs, as well as for single-ply roof constructions, especially for trapezoidal profile roofs. This composite material meets the requirements according to DIN monolithic construction Fire safety of large roofs for buildings. vliepatherm AL-SK * Self-adhesive aluminium composite foil with a polymer bitumen coating, CE marking EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepatherm AL-SK *) **) vliepatherm AL-SK 1.2 Klasse E silver > m g / m m 50 m silver > m 1200 g / m m 25 m Diffusion tight vapour barrier foil for single-ply roof constructions, especially for trapezoidal profile roofs. Suitable for temporary use as makeshift sealing in accordance with the installation instructions. **) This composite material meets the requirements according to DIN monolithic construction Fire safety of large roofs for buildings. vliepatherm protect pro SK * self-adhesive aluminium composite foil, CE marking EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepatherm protect pro SK* silver > m 220 g / m m 50 m Diffusion tight, self-adhesive vapour barrier foil for trapezoidal and flat roofs. This composite material meets the requirements according to DIN and DIN structural fire protection of large roof areas ``Fire safety of large roofs for buildings. 5

6 Roofing Materials for Pitched Roofs vliepaspan 120 UD 3-layer polypropylene nonwoven material with inner microporous film and self-adhesive strips, CE marking DIN EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepaspan 120 UD Klasse E grey/ natural m 120 g/m m 50 m Breathable roofing underlay for inverted roof. Suitable for new constructions, renovations and temporary roofing. vliepaspan without NSK * 3-layer polypropylene nonwoven material with inner microporous film, CE marking DIN EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepaspan 135 without NSK* grey/ natural 0.02 m 135 g/m m 50 m vliepaspan 160 without NSK* green/ white 0.02 m 160 g/m m 50 m Breathable roofing and wall membrane. Suitable for ventilated and non-ventilated pitched roof constructions. Suitable for new constructions, renovations and temporary roofing. vliepaspan with NSK * 3-layer polypropylene nonwoven material with inner microporous film and self-adhesive strips, CE marking DIN EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepaspan 135 with NSK grey/ natural 0.02 m 135 g/m m 50 m vliepaspan 160 with NSK grey/ natural 0.02 m 160 g/m m 50 m vliepaspan 180 with NSK* green/ natural 0.02 m 180 g/m m 50 m 6 Breathable roofing and wall membrane with a double-sided adhesive strip on each side. Suitable for ventilated and non-ventilated pitched roof constructions. Suitable for new constructions, renovations and temporary roofing.

7 Roofing Materials for Pitched Roofs vliepavap 130 PP-AL with NSK * Heat-reflecting vapour control layer (type A), CE marking EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepavap 130 PP-AL with NSK* beige/ silver 25 m 123 g/m m 50 m Protects insulation materials against the penetration of moisture from inside the room. This airtight material helps to reduce energy consumption and prevents convection. Double-sided integrated self-adhesive strips make it easy to install and deliver a high level of protection, high tear resistance and dimensional stability. vliepavap PP with NSK Vapour control layer, CE marking EN Designation Fire performance Colour SD value Weight Roll width Roll length vliepavap 100 PP with NSK white 2 m 100 g/m m 50 m vliepavap 135 PP with NSK grey/ white 10 m 135 g/m m 50 m vliepavap 180 PP with NSK opaque/ orange 20 m 180 g/m m 50 m Vapour control layer designed for use in roof, wall and interior construction with double-sided integral sealing tapes. Can be installed on formwork, directly on the rafters and looped between the rafters. Ideal for renovations and new constructions. 7

8 Adhesive Technology Sealing tape NKB/NKB 1S Solvent-free, modified acrylic adhesive with high instant bonding Designation Application Colour Thickness Roll width Roll length NKB 50 adhesive on both sides transparent 0.10 mm 50 mm 50 m NKB plus 35 adhesive on both sides transparent 0.23 mm 35 mm 50 m NKB plus 38 adhesive on both sides transparent 0.23 mm 38 mm 50 m NKB plus 50 adhesive on both sides transparent 0.23 mm 50 mm 50 m NKB 1S adhesive on one side green mm 50 mm 50 m Sealing tape for LDPE and aluminium foil. Fulfils requirements according to DIN 18234, cross section <= 15 mm 2 Sealing tape BKB Elastic mastic based on synthetic rubber, adhesive on both sides Seam tape BKB black 1.5 mm 15 mm 40 m The sealing tape BKB is a black, high-quality and highly adhesive sealing tape based on butyl rubber with plasto-elastic properties. When applied properly, the product s pronounced and highly adhesive properties deliver a solid bond on contact surfaces and thus a secure sealing effect. The selfamalgamating and ageing-resistant sealing tape BKB can be used for numerous applications due to its outstanding adhesion on cleaned surfaces made out of metal and non-metal materials. Reinforced universal tape Universal, solvent-free dispersion adhesive with sufficient instant bonding guaranteed on solid polar surfaces, as well as on unpolar, low-energy surfaces such as PE and PP foil and nonwoven materials. The smooth carrier material with scrim inlay on the foil carrier guarantees optimal adhesion on a variety of different substrates. Multiband Allround black mm 60 mm 25 m Designed for the energy-efficient sealing of pitched roofs and the weatherproof bonding of façade membranes. Due to its universal adhesive properties, it can be used as a system adhesive tape on flexible vapour barrier foils, underlay membranes and façade membranes, as well as on wooden panels in outdoor areas on their transitions at overlaps, joints, connections and penetrations. Repair tape AL 1S Self-adhesive sealing tape that can be fitted in a cold condition, made out of elastomer bitumen with a surface-treated and UV-resistant aluminium foil as a carrier, single-sided adhesive. Repair tape AL 1S black 0.7 mm mm 10 m Bonds and reliably seals metal, plastic, solid substrates, wood and glass. Suitable for sealing joints and cracks, gutters, roof and wall connections, roof claddings, eaves and flashings, glass roofs and greenhouses. 8

9 Adhesive Technology Adhesive tape VKB Self-adhesive packaging tape with solvent-free acrylate adhesive with a good resistance to ageing, adhesive on one side, individually printed. Designation Colour Weight Roll width Roll length Adhesive tape PP white/brown/ transparent 30 µm 50 mm 66 m Other dimensions and carrier types available on request. vliepabond cartridge adhesive Solvent-free, self-adhesive and permanently elastic polyacrylate dispersion with a high resistance to ageing. Designation Colour Form of delivery vliepabond cartridge adhesive blue 20 cartridges (disposable container) each containing 310 ml in a carton 60 cartons/pallet Highly effective, self-drying sealing agent for the professional realisation of permanent connections on standard vapour retarders and vapour barriers on solid building components, as well as for the airtight sealing of joints, overlaps on building components and joints in indoor areas according to DIN 4108/7. After curing, vliepabond sealing agent guarantees a secure and long-lasting hold for the planned mechanical stresses in the connection area. Solvent welding agent THF Solvent welding agent for welding vliepaspan Application: T 310 2S. Designation Solvent welding agent THF Form of delivery 6 tin cans of 1 l (disposable packaging) in carton When using the additional brush bottle, the membrane is coated on both sides with the solvent welding agent in one process to guarantee optimal and effective welding. vliepapur roof adhesive Moisture-curing, solvent-free, easy-flow 1-component polyurethane adhesive. Designation Colour Form of delivery vliepapur roof adhesive brown 84 tin cans of 6.5 kg (disposable container) on pallet: 546 kg Suitable for bonding thermal insulating materials on flat roofs. Meets the strict standards of the wind load test in accordance with ETAG006 from the Institute for Industrial Aerodynamics at the FH Aachen. Easy-to-use thanks to its 1-component system based on polyurethane. Curing occurs due to the reaction with water and/or air humidity. Broad adhesion spectrum, permanently elastic, weather-resistant, solvent-free, odourless. 9

10 Adhesive Technology Ridge sealing tape 135 Self-adhesive sealing tape with high tear resistance and UV stability. Solvent-free polyacrylate adhesive on a PP nonwoven carrier with extra high surface adhesion and high tear resistance, single-sided adhesive. Ridge sealing tape 135 grey mm customer-specific e.g. 250 mm wide customer-specific e.g. 15 m long Airtight bonding and sealing of underlay membranes with a slightly rough surface in the area of the roof ridge, with sufficient instant bonding guaranteed. Nail sealing tape NDB 1S Self-adhesive, closed-cell PE foam adhesive tape based on hot-melt synthetic rubber with a very strong initial adhesion, single-sided adhesive. NDB 1S anthracite mm mm m Universal PE foam sealing tape for permanently rainproof sealing, for use when mounting the battens with nail or screw penetrations, on roof and wall membranes.. Nail sealing tape NDB Self-adhesive, closed-cell PE foam adhesive tape with a double-sided, solvent-free and ageing-resistant polyacrylate adhesive. NDB anthracite mm mm m Universal PE foam sealing tape for permanently rainproof sealing, for use when mounting the battens with nail or screw penetrations, on roof and wall membranes. Seam tape NSKB 1S Solvent-free polyacrylate adhesive on a nonwoven carrier with extra high surface adhesion, single-sided adhesive. NSKB 1S grey mm 60 mm 25 m Airtight bonding and sealing of overlaps, connections and penetrations through flexible vapour barriers and underlay membranes with slightly rough surfaces in outdoor areas in accordance with DIN

11 Building Materials Fibre glass material GUA 60 Fibre glass material made out of textile glass fibres with/without fibre reinforcement Designation Colour Weight Roll width Roll length GUA 60 white 60 g / m m 200 m Separating layer/underlay for installation beneath mastic asphalt. Fibre glass material GL-S 75 AV / A2 Fibre glass material made out of textile glass fibres Designation Fire performance Colour Weight Roll width Roll length GL-S 75 AV / A2 DIN Class A2 black 75 g / m m 100 m Acoustic and trickle protection for roofs and facades when using glass fibre and stone wool insulating materials. Absorbs vibrations. Wool felt board WFP Roofing felt board based on recycled paper with 40% rag material Designation Colour Weight Roll width Roll length WFP 250 grey 250 g / m m 100 m WFP 330 grey 330 g / m m 50 m WFP 400 grey 400 g / m m 50 m WFP 500 grey 500 g / m m 50 m Separating/intermediate layer for installation beneath mastic asphalt. Protective covers for the painting and coating trade. Underlay for parquet flooring. Protects floor coverings against dirt, scratches, etc. 11

12 Nonwoven Materials, Paper and Plastic Finishing Solutions for the construction, paper and packaging industries Postbox 2001 D Brüggen Heidhausen 81 D Brüggen 03/18 T +49 (0) F +49 (0) Roofing Layers for Insulation Materials Printing and Finishing Roofing and Building Materials