CURRICULUM VITAE ASSOCIATE PROFESSOR QING QUAN (STEPHEN) LIANG

Transcription

1 CURRICULUM VITAE ASSOCIATE PROFESSOR QING QUAN (STEPHEN) LIANG College of Engineering and Science, Victoria University, Footscray Park Campus PO Box 14428, Melbourne, VIC 8001, Australia Phone: (03) E mail: Qing.Liang@vu.edu.au 28 June 2017 EDUCATION 2011 Graduate Certificate in Tertiary Education, Victoria University, Australia 2002 PhD in Structural Engineering, Victoria University of Technology, Australia 1998 ME (Honours) in Structural Engineering, The University of Wollongong, Australia 1986 Graduated in Civil Engineering, The Architectural Engineering Institute of Guangdong Province, Guangzhou, China CURRENT AND PREVIOUS POSITIONS 2013 date Associate Professor of Structural Engineering College of Engineering and Science, Victoria University, Melbourne Senior Lecturer in Structural Engineering School of Engineering and Science, Victoria University, Melbourne Lecturer in Structural Engineering School of Engineering and Science, Victoria University, Melbourne Lecturer in Structural Design, Associate Head and Program Coordinator Faculty of Engineering and Surveying, The University of Southern Queensland Australian Postdoctoral Fellow, The Australian Research Council School of Civil and Environmental Engineering, University of New South Wales Research Associate School of Civil and Environmental Engineering, University of New South Wales Research Associate School of Engineering and Industrial Design, University of Western Sydney 2014 date Guest Professor Xi an University of Architecture and Technology, Xi an, China Guest Professor Central South University, Hunan, China 2003 date Guest Professor Changsha University of Science and Technology, Hunan, China COMMITTEES OF PROFESSIONAL ASSOCIATIONS 2015 date Founder & President, Australian Association for Steel Concrete Composite Structures (AASCCS) date Director, International Section, Australian Association for Steel Concrete Composite Structures (AASCCS) date Director, Victoria University Chapter, Australian Association for Steel Concrete Composite Structures (AASCCS) Member, Technical Committee on Composite Construction, American Society of Civil Engineers (ASCE) Member, Technical Committee on Optimal Structural Design, American Society of Civil Engineers (ASCE) Treasurer, Executive Committee, ASCE Australia International Group. Page 1 of 11

2 PROFESSIONAL MEMBERSHIPS Member, Australian Association for Steel Concrete Composite Structures (AASCCS) Member, American Society of Civil Engineers (ASCE) Member, ASCE Australia International Section Member, The International Society of Structural and Multidisciplinary Optimization (ISSMO) Member, The Association for Steel Concrete Composite Structures (ASCCS) AWARDS AND FELLOWSHIPS 2005 State of the Art of Civil Engineering Award, American Society of Civil Engineers Australian Postdoctoral Fellowship, The Australian Research Council Australian Postgraduate Award, Victoria University of Technology Faculty of Engineering and Science Scholarship, Victoria University of Technology Secomb Conference and Travel Fund Award, Victoria University of Technology. EDITORSHIPS AND EDITORIAL BOARDS Editorial Board, Journal of Soft Computing in Civil Engineering, 2017 date. Editorial Board, The Open Conference Proceedings Journal, 2014 date. Editorial Board, Steel and Composite Structures, An International Journal, 2013 date. Editorial Board, American Journal of Engineering and Applied Science, Editorial Board, Mathematical Problems in Engineering, Editorial Board, Journal of Construction Engineering, Editorial Board, The Scientific World Journal, Civil Engineering, Editorial Board, The Open Construction and Building Technology Journal, Guest Editor, Special Issue on Structural Design Optimization, Advances in Structural Engineering, 2007, Vol. 10, No.6 Guest Editor, Special Issue on Steel Concrete Composite Structures, Australian Journal of Structural Engineering, 2007, Vol. 7, No.2. CONFERENCE ORGANISING/SCIENTIFIC COMMITTEES 2016 Member, Technical Program Committee, International Conference on Advanced Material Research and Application, August, 2016, Guilin, China Member, International Scientific Committee, Chinese Academy of Engineering International Top Level Forum on Engineering Science and Technology Development Strategy and Innovation and Development of Structures & Structural Modal Properties Measurement and Applications, May, 2016, Chongqing, China Member, Scientific Committee, the 2nd Australasian Conference on Computational Mechanics, November 30 to December 1, 2015, Brisbane, Australia Member, Local Organising Committee, the 11th World Congress of Structural and Multidisciplinary Optimisation, 7 12 June, 2015, Sydney, Australia Member, Organising Committee, the First Australasian Conference on Computational Mechanics, 3 4 October, 2013, Sydney, Australia Session Chairman, the 10th International Conference on Steel Concrete Composite and Hybrid Structures, 2 4 July, Singapore Session Chairman, the Tenth East Asia Pacific Conference on Structural Engineering and Construction (EASEC 10), Bangkok, Thailand Session Chairman, International Conference on Advances in Structures: Steel, Concrete, Composite and Aluminium (ASSCCA 03), Sydney, Australia. Page 2 of 11

3 RESEARCH INTERESTS Steel concrete composite structures: composite columns, beams, connections and frames Concrete structures: behaviour, design, strut and tie modelling, and strengthening Steel structures: local and global buckling Performance based earthquake and fire engineering Structural optimisation: topology, shape and sizing optimization Finite element analysis/nonlinear inelastic analysis Computational mechanics RESEARCH IMPACTS Total citations in Google Scholars = 1692 The h index = 24 The i10 index = 35 ScienceDirect Top 25 Hottest Articles = 11 More than 80% of journal articles were published in SCImago Journal Rank Q1 international journals. Books adopted as textbooks/teaching materials = 3 TEACHING EXPERIENCE Units Taught at Victoria University 2017 date NEC4102 Structural Engineering Design 2 (Steel and Composite Structures) VAC4191 Structural Engineering Design 2 (Steel and Composite Structures) VAC4192 Structural Engineering Design 3 (Prestressed Concrete Structures) VAC4091 Structural Engineering Design 1 (Steel Design Part) VAC4092 Structural Engineering Design 2 (Prestressed Concrete Structures) VAC4021 Structural Engineering Analysis & Design 1 (Steel Design Part) VAC4022 Structural Engineering Analysis & Design 2 (Prestressed Concrete Structures & Finite Element Method) 2008 VAN1022 Solid Mechanics 1 Courses Taught at University of Southern Queensland CIV4508 Structural Design II (Concrete, Steel and Composite Structures) 2007 CIV3505 Structural Analysis (Finite Element Analysis: Classic Theory Part) 2006 CIV2503 Structural Design I (Steel and Timber Structures) UNIVERSITY AND COLLEGE COMMITTEES 2016 Lab Review Working Party, College of Engineering and Science, Victoria University VU Alternative Entry PhD Working Party, Victoria University Postgraduate Research Committee, Victoria University Working Party on Classification of Thesis, Victoria University Faculty Research and Higher Degrees Committee, University of Southern Queensland Program Coordinator, Discipline of Agricultural, Civil and Environmental Engineering, The University of Southern Queensland Associate Head, Discipline of Agricultural, Civil and Environmental Engineering, The University of Southern Queensland. Page 3 of 11

4 REVIEWER OF BOOKS, JOURNAL ARTICLES AND CONFERENCE PAPERS 1. Review of Book Proposal and Books, CRC Press, Taylor and Francis Group. 2. Book Proposal Review, Wiley Blackwell. 3. International Journal of Solids and Structures, Elsevier. 4. Journal of Structural Engineering, American Society of Civil Engineers. 5. International Journal of Structural Stability and Dynamics, World Scientific Publishing. 6. International Journal of the Italian Association of Theoretical and Applied Mechanics AIMETA. 7. Advances in Structural Engineering, An International Journal, Multi Science Publishing, UK. 8. Steel & Composite Structures, An International Journal, Techno Press. 9. ACI Structural Journal, American Concrete Institute. 10. Advances in Engineering Software, Elsevier. 11. Structural Engineering & Mechanics, An International Journal, Techno Press. 12. Engineering Structures, Elsevier. 13. Concrete International Magazine, American Concrete Institute. 14. Journal of Composite Materials, SAGE Publications. 15. Computer Applications in Engineering Education, Wiley Periodicals, Inc. 16. Australian Journal of Structural Engineering. 17. Computers and Structures, An International Journal, Elsevier. 18. Computer Methods in Applied Mechanics and Engineering, Elsevier. 19. Songklanakarin Journal of Science and Technology, Thailand. 20. Finite Elements in Analysis and Design, Elsevier. 21. Composite Part B:Engineering, An International Journal, Elsevier. 22. Recent Patents on Engineering, Bentham Open. 23. The Scientific World Journal: Civil Engineering, Hindawi Publishing Corporation, USA. 24. Scientia Iranica, Elsevier. 25. Engineering with Computers, Springer. 26. Ships and Offshore Structures, Taylor and Francis. 27. Engineering Analysis with Boundary Elements, Elsevier. 28. Engineering Optimization, Taylor and Francis. 29. Thin Walled Structures, Elsevier. 30. Earthquake Engineering and Engineering Vibration, Springer. 31. Structural and Multidisciplinary Optimization, Springer. 32. The Hong Kong Institution of Engineers Transactions. 33. IES Journal Part A: Civil and Structural Engineering, Taylor and Francis. 34. International Journal for Numerical Methods in Biomedical Engineering, John Wiley & Sons Ltd. 35. American Journal of Engineering and Applied Science, Science Publications. 36. The Open Civil Engineering Journal, Bentham Open. 37. International Journal of Polymer Science, Hindawi Publishing Corporation, USA. 38. Construction and Building Materials, Elsevier. 39. Frontiers of Structural and Civil Engineering, Springer. 40. Composite Structures, Elsevier. 41. Structures, Elsevier. 42. Journal of Optimization Theory and Applications, Springer. 43. European Journal of Environmental and Civil Engineering, Taylor and Francis. 44. Journal of Bridge Engineering, American Society of Civil Engineers. 45. International Conference on Advances in Structures: Steel, Concrete, Composite and Aluminium, Sydney, Australia, Structures Congress, St. Louis, USA, The 17 th IASTED International Conference on Modeling and Simulation, Montreal, Canada, The 4 th Int. Structural Engineering and Construction Conference, Melbourne, Australia, IOP Conference Series:Materials Science and Engineering, The 9 th World Congress on Computational Mechanics and 4 th Asian Pacific Congress on Computational Mechanics, 2010, Sydney, Australia. Page 4 of 11

5 PUBLICATIONS BOOKS 1. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2015). Nonlinear Analysis of Concrete Filled Steel Tubular Columns, Scholar s Press, Germany, ISBN , 196 pages. Citations = Liang, Q. Q. (2014). Analysis and Design of Steel and Composite Structures, CRC Press, Taylor and Francis Group, Boca Raton and London, ISBN , 458 pages. Citations = Liang, Q. Q. (2005). Performance Based Optimization of Structures: Theory and Applications, Spon Press, Taylor and Francis Group, London and New York, ISBN , ISBN , 280 pages. Citations = Liang, Q. Q. and Patrick, M. (2001). Design of the Shear Connection of Simply Supported Composite Beams, Design Booklet DB1.2, Composite Structures Design Manual, OneSteel, Sydney, (Computer software COMPSHEAR and COMPSECT on CD included). DOCTORAL THESIS 5. Liang, Q. Q. (2001). Performance Based Optimization Method for Structural Topology and Shape Design, Ph.D. Thesis, Victoria University of Technology, Australia. Citations = 7. BOOK CHAPTERS 6. Xie, Y. M., Yang, X. Y., Liang, Q. Q., Steven, G. P. and Querin, O. M. (2002). Evolutionary Structural Optimization, Chapter 6, in Recent Advances in Optimal Structural Design, edited by S. A. Burns, American Society of Civil Engineers, ISBN Citations = 7. REFEREED JOURNAL ARTICLES 7. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2017). Nonlinear analysis of biaxially loaded rectangular concrete filled stainless steel tubular slender columns, Engineering Structures, 140: SCImago Journal Rank = Q1. Impact Factor = Liang, Q. Q. (2017). Nonlinear analysis of circular double skin concrete filled steel tubular columns under axial compression, Engineering Structures, 131: SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2017). Nonlinear analysis of circular high strength concrete filled stainless steel tubular slender beam columns, Engineering Structures, 130:1 13. SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2015). Biaxially loaded high strength concrete filled steel tubular slender beam columns, Part II: Parametric study, Journal of Constructional Steel Research, 110: (ScienceDirect Top 25 Hottest Articles, April June 2015). SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2014). Nonlinear analysis of axially loaded circular concrete filled stainless steel tubular short columns, Journal of Constructional Steel Research, 101:9 18. SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2014). Behavior of biaxially loaded rectangular concrete filled steel tubular slender beam columns with preload effects, Thin Walled Structures, 79: SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2014). Numerical analysis of high strength concretefilled steel tubular slender beam columns under cyclic loading, Journal of Constructional Steel Research, 92: (ScienceDirect Top 25 Hottest Articles, October December 2013). SCImago Journal Rank = Q1. Impact Factor = Citations = 11. Page 5 of 11

6 14. Hassanein, M. F., Kharoob, O. F. and Liang, Q. Q. (2013). Circular concrete filled double skin tubular short columns with external stainless steel tubes under axial compression, Thin Walled Structures, 73: SCImago Journal Rank = Q1. Impact Factor = Citations = Hassanein, M. F., Kharoob, O. F. and Liang, Q. Q. (2013). Behaviour of circular concrete filled lean duplex stainless steel carbon steel tubular short columns, Engineering Structures, 56: SCImago Journal Rank = Q1. Impact Factor = Citations = Hassanein, M. F., Kharoob, O. F. and Liang, Q. Q. (2013). Behaviour of circular concrete filled lean duplex stainless steel tubular short columns, Thin Walled Structures, 68: SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2013). Numerical analysis of circular concrete filled steel tubular slender beam columns with preload effects, International Journal of Structural Stability and Dynamics, 13(3): (23 pages). SCImago Journal Rank = Q2. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2012). Inelastic stability analysis of high strength rectangular concrete filled steel tubular slender beam columns, Interaction and Multiscale Mechanics, An International Journal, 5(2): Citations = Liang, Q. Q., Patel, V. I. and Hadi, M. N. S. (2012). Biaxially loaded high strength concrete filled steel tubular slender beam columns, Part I: Multiscale simulation, Journal of Constructional Steel Research, 75: (ScienceDirect Top 25 Hottest Articles, April June 2012). SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2012). High strength thin walled rectangular concretefilled steel tubular slender beam columns, Part I: Modeling, Journal of Constructional Steel Research, 70: SCImago Journal Rank = Q1. Impact Factor = Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2012). High strength thin walled rectangular concretefilled steel tubular slender beam columns, Part II: Behavior, Journal of Constructional Steel Research, 70: SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. (2011). High strength circular concrete filled steel tubular slender beamcolumns, Part I: Numerical analysis, Journal of Constructional Steel Research, 67(2): (ScienceDirect Top 25 Hottest Articles, October December 2010). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. (2011). High strength circular concrete filled steel tubular slender beamcolumns, Part II: Fundamental behaviour, Journal of Constructional Steel Research, 67(2): (ScienceDirect Top 25 Hottest Articles, October December 2010). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. and Fragomeni, S. (2010). Nonlinear analysis of circular concrete filled steel tubular short columns under eccentric loading, Journal of Constructional Steel Research, 66(2): (ScienceDirect Top 25 Hottest Articles, October December 2009). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. and Fragomeni, S. (2009). Nonlinear analysis of circular concrete filled steel tubular short columns under axial loading, Journal of Constructional Steel Research, 65(12): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. (2009). Strength and ductility of high strength concrete filled steel tubular beam columns, Journal of Constructional Steel Research, 65(3): (ScienceDirect Top 25 Hottest Articles, January March 2009). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. (2009). Performance based analysis of concrete filled steel tubular beam columns, Part I: Theory and algorithms, Journal of Constructional Steel Research, 65(2): (Most Cited JCSR Articles in 2014). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. (2009). Performance based analysis of concrete filled steel tubular beam columns, Part II: Verification and applications, Journal of Constructional Steel Research, 65(2): SCImago Journal Rank = Q1. Impact Factor = Citations = Rong, J. H. and Liang, Q. Q. (2008). A level set method for topology optimization of continuum structures with bounded design domains, Computer Methods in Applied Mechanics and Page 6 of 11

7 Engineering, 197(17 18): (ScienceDirect Top 25 Hottest Articles, January March 2008). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. (2008). Nonlinear analysis of short concrete filled steel tubular beam columns under axial load and biaxial bending, Journal of Constructional Steel Research, 64(3): (ScienceDirect Top 25 Hottest Articles, January March 2008). SCImago Journal Rank = Q1. Impact Factor = Citations = Rong, J. H., Liang, Q. Q. and Yang, D. S. (2007). A level set method for structural topology optimization based on topology random mutations, Journal of Theoretical and Applied Mechanics, 39(6): (in Chinese). SCImago Journal Rank = Q3. Citations = Liang, Q. Q. (2007). Performance based optimization: A review, Advances in Structural Engineering, An International Journal, 10(6): SCImago Journal Rank = Q2. Impact Factor = Citations = Liang, Q. Q., Uy, B. and Liew, J. Y. R. (2007). Strength of concrete filled steel box columns with buckling effects, Australian Journal of Structural Engineering, 7(2): SCImago Journal Rank = Q2. Citations = Liang, Q. Q., Uy, B., Bradford, M. A. and Ronagh, H. R. (2007). Closure to Strength analysis of steel concrete composite beams in combined bending and shear by Liang, Q. Q., Uy, B., Bradford, M. A. and Ronagh, H. R., Journal of Structural Engineering, American Society of Civil Engineers, 133(2): SCImago Journal Rank = Q1. Impact Factor = Liang, Q. Q., Uy, B. and Liew, J. Y. R. (2007). Local buckling of steel plates in concrete filled thinwalled steel tubular beam columns, Journal of Constructional Steel Research, 63(3): (Most Cited JCSR Articles in 2012, ScienceDirect Top 25 Hottest Articles, October December 2006, January March 2007, July September 2007). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Uy, B. and Liew, J. Y. R. (2006). Nonlinear analysis of concrete filled thin walled steel box columns with local buckling effects, Journal of Constructional Steel Research, 62(6): (Top 10 Cited JCSR Articles in ; ScienceDirect Top 25 Hottest Articles, January March 2006, April June 2006, July September 2006). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Uy, B., Bradford, M. A. and Ronagh, H. R. (2005). Strength analysis of steel concrete composite beams in combined bending and shear, Journal of Structural Engineering, American Society of Civil Engineers, 131(10): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Uy, B., Bradford, M. A. and Ronagh, H. R. (2004). Ultimate strength of continuous composite beams in combined bending and shear, Journal of Constructional Steel Research, 60(8): (ScienceDirect Top 25 Hottest Articles, July September 2004, October December 2004, January March 2005). SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Uy, B., Wright, H. D. and Bradford, M. A. (2004). Local buckling of steel plates in double skin composite panels under biaxial compression and shear, Journal of Structural Engineering, American Society of Civil Engineers, 130(3): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Uy, B., Wright, H. D. and Bradford, M. A. (2003). Local and post local buckling of double skin composite panels, Structures and Buildings, Proceedings of The Institution of Civil Engineers, UK, 156(2): SCImago Journal Rank = Q3. Impact Factor = Citations = Liang, Q. Q., Uy, B. and Steven, G. P. (2002). Performance based optimization for strut tie modeling of structural concrete, Journal of Structural Engineering, American Society of Civil Engineers, 128(6): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. and Steven, G. P. (2002). A performance based optimization method for topology design of continuum structures with mean compliance constraints, Computer Methods in Applied Mechanics and Engineering, 191(13 14): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (2001). A performance index for topology and shape optimization of plate bending problems with displacement constraints, Structural and Page 7 of 11

8 Multidisciplinary Optimization, 21(5): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (2001). Generating optimal strut and tie models in prestressed concrete beams by performance based optimization, ACI Structural Journal, American Concrete Institute, 98(2): SCImago Journal Rank = Q1. Impact Factor = Citations = Rong, J. H., Xie, Y. M., Yang, X. Y. and Liang, Q. Q. (2000). Topology optimization of structures under dynamic response constraints, Journal of Sound and Vibration, 234(2): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (2000). Optimal topology selection of continuum structures with displacement constraints, Computers and Structures, An International Journal, 77(6): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (2000). Optimal topology design of bracing systems for multistory steel frames, Journal of Structural Engineering, American Society of Civil Engineers, 126(7): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q. and Uy, B. (2000). Theoretical study on the post local buckling of steel plates in concrete filled box columns, Computers and Structures, An International Journal, 75(5): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (2000). Topology optimization of strut and tie models in reinforced concrete structures using an evolutionary procedure, ACI Structural Journal, American Concrete Institute, 97(2): SCImago Journal Rank = Q1. Impact Factor = Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (1999). Optimal selection of topologies for the minimumweight design of continuum structures with stress constraints, Journal of Mechanical Engineering Science, Proceedings of The Institution of Mechanical Engineers, UK, Part C, 213(8): SCImago Journal Rank = Q2. Impact Factor = Citations = Liang, Q. Q. and Uy, B. (1998). Parametric study on the structural behaviour of steel plates in concrete filled fabricated thin walled box columns, Advances in Structural Engineering, An International Journal, 2(1): SCImago Journal Rank = Q2. Impact Factor = Citations = 28. REFEREED CONFERENCE PAPERS 52. Liang, Q. Q., Patel, V. I. and Hadi, M. N. S. (2012). Nonlinear analysis of biaxially loaded high strength rectangular concrete filled steel tubular slender beam columns, Part I: Theory, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, Singapore, July 2012, pp Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2012). Nonlinear analysis of biaxially loaded high strength rectangular concrete filled steel tubular slender beam columns, Part II: Applications, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, Singapore, July 2012, pp Citations = Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2012). Nonlinear inelastic behavior of circular concretefilled steel tubular slender beam columns with preload effects, Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, Singapore, July 2012, pp Liang, Q. Q. (2010). Performance based shape optimization of continuum structures, Proceedings of the 9th World Congress on Computational Mechanics and the 4th Asian Pacific Congress on Computational Mechanics, Sydney, Australia, July Liang, Q. Q. and Fragomeni, S. (2009). Development and design of strut and tie models in reinforced concrete deep beams, Proceedings of the 24th Biennial Conference of the Concrete Institute of Australia, Sydney, Australia, September Liang, Q. Q. and Fragomeni, S. (2009). Nonlinear inelastic behavior of circular concrete filled steel tubular slender beam columns, Proceedings of the 24th Biennial Conference of the Concrete Institute of Australia, Sydney, Australia, September Page 8 of 11

9 58. Liang, Q. Q. (2008). Inelastic analysis of concrete filled steel tubular beam columns with local buckling effects, Part I: Theory, Proceedings of the Australasian Structural Engineering Conference, Melbourne, Australia, Citations = Liang, Q. Q. (2008). Inelastic analysis of concrete filled steel tubular beam columns with local buckling effects, Part II: Applications, Proceedings of the Australasian Structural Engineering Conference, Melbourne, Australia, Citations = Liang, Q. Q. and Fragomeni, S. (2008). Computer automated performance based optimization of strut and tie models in reinforced concrete corbels, Proceedings of the Australasian Structural Engineering Conference, Melbourne, Australia, Citations = Liang, Q. Q. (2008). Fiber element analysis of concrete filled steel tubular columns under axial load and biaxial bending, Thin Walled Structures: Recent Innovations and Developments, Proceedings of the Fifth International Conference on Thin Walled Structures, Gold Coast, Australia, 2008, pp ISBN Liang, Q. Q. (2008). Ultimate strength of high strength concrete filled steel tubular columns under axial load and biaxial bending, Thin Walled Structures: Recent Innovations and Developments, Proceedings of the Fifth International Conference on Thin Walled Structures, Gold Coast, Australia, 2008, pp ISBN Rong, J. H., Liang, Q. Q., Guo, S. and Mu, R. K. (2008). A topological optimization method considering stress constraints, Proceedings of the International Conference on Intelligent Computation Technology and Automation, Vol. 1, Changsha, China, pp Citations = Liang, Q. Q. (2007). Automated performance based optimal design of continuum structures under multiple load cases, Proceedings of the Fifth Australasian Congress on Applied Mechanics, Brisbane, Australia, 2007, pp Citations = Liang, Q. Q. (2007). Effects of continuum design domains on optimal bracing systems for multistory steel building frameworks, Proceedings of the Fifth Australasian Congress on Applied Mechanics, Brisbane, Australia, 2007, pp Citations = Liang, Q. Q. and Ng, A. W. M. (2007). Performance based optimization of strut and tie models in reinforced concrete deep beams, Innovations in Structural Engineering and Construction, Proceedings of the Fourth International Structural Engineering and Construction Conference, Melbourne, Australia, 2007, pp Liang, Q. Q. and Hadi, M. N. S. (2007). Nonlinear analysis and behavior of concrete filled steel tubular beam columns, Innovations in Structural Engineering and Construction, Proceedings of the Fourth International Structural Engineering and Construction Conference, Melbourne, Australia, 2007, pp Rong, J. H., Yi, J. H. and Liang, Q. Q. (2007). A level set method with maximum design domain limits, Innovations in Structural Engineering and Construction, Proceedings of the Fourth International Structural Engineering and Construction Conference, Melbourne, Australia, 2007, pp Liang, Q. Q. (2006). Inelastic behavior of concrete filled thin walled steel tubular columns subjected to local buckling, Real Structures: Bridges and Tall Buildings, Proceedings of the Tenth East Asia Pacific Conference on Structural Engineering and Construction, Bangkok, Thailand, 2006, pp Citations = Liang, Q. Q. (2006). Performance based optimization of strut and tie models in reinforced concrete beam column connections, Real Structures: Bridges and Tall Buildings, Proceedings of the Tenth East Asia Pacific Conference on Structural Engineering and Construction, Bangkok, Thailand, 2006, pp Citations = Liang, Q. Q. (2006). Post local buckling of steel plates in concrete filled thin walled steel tubular columns under biaxial loading, Materials, Experimentation, Maintenance and Rehabilitation, Proceedings of the Tenth East Asia Pacific Conference on Structural Engineering and Construction, Bangkok, Thailand, 2006, pp Rong, J. H. and Liang, Q. Q. (2006). A level set method for structural topology optimization considering maximum design domain limits, Proceedings of the Fourth China Japan Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kunming, China, pp Page 9 of 11

10 73. Rong, J. H., Tang, G. J., Liang, Q. Q. and Yang, Z. X. (2005). A topology optimization method for three dimensional continuum structures, Proceedings of the 6th World Congress on Structural and Multidisciplinary Optimization, Rio, de Janeiro, Brazil, 2005, pp Citations = Liang, Q. Q., Uy, B. and Liew, J. Y. R. (2005). Strength of concrete filled steel box columns with local buckling effects, Proceedings of the Australian Structural Engineering Conference, Newcastle, Australia, Citations = Uy, B., Bradford, M. A. and Liang, Q. Q. (2004). Behaviour and design of composite beams subjected to flexure and torsion, Proceedings of the United Engineering Foundation 5th Conference on Composite Construction in Steel and Concrete, Kruger National Park, South Africa, Liang, Q. Q., Uy, B., Bradford, M. A. and Ronagh, H. R. (2004). Ultimate strength of composite beams in combined bending and shear, Proceedings of the Second International Conference on Steel & Composite Structures, Seoul, Korea, 2004, pp ISBN Liang, Q. Q., Uy, B., Wright, H. D. and Bradford, M. A. (2003). Local and post local buckling of composite steel concrete panels under combined states of stresses, Advances in Structures, Proceedings of the International Conference on Advances in Structures: Steel, Concrete, Composite and Aluminium, Sydney, Australia, A. A. Balkema Publishers, 2003, pp Liang, Q. Q., Uy, B., Wright, H. D. and Bradford, M. A. (2002). Local buckling of biaxially compressed steel plates in double skin composite panels, Advances in Steel Structures, Proceedings of the Third International Conference on Advances in Steel Structures, Hong Kong, China, Elsevier Science Ltd, 2002, pp Citations = Patrick, M. and Liang, Q. Q. (2002). Shear connection to steel tubes used in composite beam construction, Composite Construction in Steel and Concrete IV, Proceedings of the United Engineering Foundation 4 th Conference on Composite Construction in Steel and Concrete, ASCE, 2002, pp Berry, P. A., Patrick, M., Liang, Q. Q. and Ng, A. (2001). Cross section design of continuous composite beams, Proceedings of the Australasian Structural Engineering Conference, Gold Coast, Australia, 2001, pp Liang, Q. Q., Patrick, M. and Bridge, R. Q. (2001). Computer software for longitudinal shear design of steel concrete composite beams, Proceedings of the Australasian Structural Engineering Conference, Gold Coast, Australia, 2001, pp Liang, Q. Q. (2001). Performance based optimization method in civil and structural engineering, Proceedings of the Australasian Structural Engineering Conference, Gold Coast,, pp Liang, Q. Q., Bridge, R. Q., Patrick, M., Berry, P. A. and Ng, A. (2001). COMPSECT: A computer software for cross section design of continuous composite beams, Proceedings of the Second International Conference on Mechanics of Structures, Materials and Systems, Wollongong, Australia, 2001, pp Liang, Q. Q., Xie, Y. M. and Steven, G. P. (1999). Optimal strut and tie models in structural concrete members, Optimization and Control in Civil and Structural Engineering, Proceedings of the Seventh International Conference on Civil and Structural Engineering Computing, Oxford, England, Civil Comp Press, 1999, pp Citations = Liang, Q. Q., Xie, Y. M. and Steven, G. P. (1999). Optimal topology selection of continuum structures with stress and displacement constraints, Proceedings of the Seventh East Asia Pacific Conference on Structural Engineering and Construction, Kochi, Japan, pp Citations = Liang, Q. Q., Xie, Y. M., Steven, G. P. and Schmidt, L. C. (1999). Topology optimization of strut andtie models in non flexural reinforced concrete members, Proceedings of the Int. Conference on Mechanics of Structures, Materials and Systems, Wollongong, Australia, pp Citations = Liang, Q. Q. and Uy, B. (1998). Geometric and material nonlinear behaviour of steel plates in thinwalled concrete filled box columns, Proceedings of the Second International Conference on Thin Walled Structures, Singapore, pp Page 10 of 11

11 EDITED SPECIAL ISSUES 88. Liang, Q. Q. (2007). Special Issue on Structural Design Optimization, Advances in Structural Engineering, An International Journal, Vol. 10, No Uy, B. and Liang, Q. Q. (2007). Special Issue on Steel Concrete Composite Structures, Australian Journal of Structural Engineering, Vol. 7, No. 2. Page 11 of 11