Grace PV 100 Pre-applied Waterproofing Membrane

Transcription

1 Grace PV 00 Pre-applied Waterproofing Membrane One Bond One Waterproofing

2 OneBond Basement waterproofing is absolutely critical to get right, in order to prevent harmful damages to the entire structure from ground moisture and water ingress. In many cases, it is costly and difficult to reach these areas for repairs later, especially in congested cities where buildings are tightly spaced. Often, the only solution for positive side waterproofing in confined space is the use of a pre-applied waterproofing membrane.

3 Grace PV 00 Pre-applied Waterproofing Membrane Specially developed by Grace with over 50 years experience in below grade waterproofing, and over 20 years experience in pre-applied waterproofing technology, Grace PV 00 pre-applied waterproofing consists of a layer of high strength PE film, self-adhesive polymer layer and a unique particulate layer. Grace PV 00 will bond fully and permanently with concrete poured against it. Grace PV 00 Benefits Forms permanent bond to concrete poured against it, preventing water from seeping into the gap between structure and membrane Provides truly effective, long-term waterproofing protection Not affected by ground settlement beneath slabs Bond to concrete stays strong even after exposure to UV, heat and dust Unaffected by wet conditions Fully adhered watertight laps and detailing Simple and quick to install, requiring no priming or fillets Fast track construction Self-protecting membrane can be trafficked immediately after installation, requiring no protective layer Can be applied at -4ºC and above Single layer only, and can be installed on wet substrate Saves space Environmentally friendly Waterproofing can be installed before concrete slab and wall are cast, saving space and enabling building right up to the edge of the plot Odour free, no heating required Building envelope solution Compatible with the full range of Grace building envelope solutions such as Bituthene self-adhesive waterproofing membrane, Preprufe Tape, Bituthene Liquid Membrane, and Hydroduct drainage composites

4 One Bond Bond to Concrete Technology How It Works Specially formulated particulate layer Pressure-sensitive, self-adhesive polymer layer Bonds fully and permanently with structural concrete High performance PE layer that seals around nails The Grace Building Envelope Protection Solutions Grace s complete systems-based approach to waterproofing and its extensive range of fully compatible waterproofing products and accessories allow effective enveloping of structures with a flexible, fully adhered waterproofing barrier. Grace is a single source solution for virtually any below and above ground application. Grace PV 00 is developed to be fully compatible with all Grace waterproofing systems. These include the Grace Preprufe pre-applied waterproof membrane, where its advanced bond technology forms a unique integral seal to concrete poured against it. Together with its Bituthene family of self-adhesive waterproof membranes, and Grace Ice & Water Shield roofing underlayments, they have been applied to innumerable prominent projects all over the world. Silcor liquid waterproofing offers architects and contractors further options, as it cures rapidly to form a seamless, monolithic membrane fully bonded to the substrate. Complementing the systems are Hydroduct drainage components and a range of accessory products.

5 The Grace Building Envelope Protection Solutions Grace PV 00 / Preprufe Pre-applied Waterproofing Membrane 2. Bituthene Self-adhesive Waterpoofing Membrane 3. Adprufe Integral Waterproofing for Concrete 4. Betec Cementitious Waterproofing Membrane 5. Silcor Spray-applied Liquid Waterproofing System

6 Asia Pacific Key Locations Australia Grace Australia Pty. Ltd. Melbourne 40 Scanlon Drive Epping Victoria 3076 Tel: Fax: China Mainland Grace China Ltd. Shanghai 9th Floor K. Wah Centre 00 Huai Hai Zhong Road Shanghai P. R. China Tel: Fax: Hong Kong W R Grace (HK) Limited Grace Industrial Building 6 On Chuen Street On Lok Tsuen Ind Area Fanling, Hong Kong Tel: Fax: Japan Grace Chemicals K. K. Tokyo 5th Floor M-Press Building Hamamatsu-cho Minato-ku Tokyo Tel: Fax: Korea Grace Korea Inc. Incheon 70- Namdong Industrial Complex 639 Kojan-dong, Namdong-ku Incheon City Tel: Fax: Singapore W R Grace (Singapore) Pte Ltd 25 Tanjong Penjuru Singapore Tel: Fax: Taiwan W R Grace Taiwan Inc Taipei No 38 Pei-Yuan Road Chung-Li Industry Park Taoyuan County Taiwan Tel: Fax: Vietnam W.R. Grace Vietnam Company Limited Ho Chi Minh City Lot B4, Section B, No. 2 Street, Xuan Thoi Son Small Scale Arts and Crafts Group, National Road 22, Xuan Thoi Son Village, Hoc Mon District, Ho Chi Minh City Tel: Fax: Hanoi Lot XN2, Dai An Industrial Zone KM 5, Highway No. 5, Tu Minh Ward Hai Duong Province Tel: Fax: Worldwide Headquarters W. R. Grace & Co. 62 Whittemore Avenue Cambridge, MA 0240 U.S.A. Tel: Adprufe, Betec, Bituthene, Grace, Grace Ice & Water Shield, Hydroduct, Preprufe and Silcor are registered trademarks of W. R. Grace & Co.-Conn. We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate and is offered for the users consideration, investigation and verification, but we do not warrant the results to be obtained. Please read all statements, recommendations or suggestions in conjunction with our conditions of sale, which apply to all goods supplied to us. No statement, recommendation or suggestion is intended for any use, which would infringe any patent or copyright. W. R. Grace (Singapore) Pte. Ltd., 25 Tanjong Penjuru, Singapore These products may be covered by patents pending. 20 W. R. Grace (Singapore) Pte. Ltd. Printed in Singapore / 0-PV00-52