Laboratory Furniture Fume Hood. Turnkey Lab Solution

Transcription

1 Laboratory Furniture Fume Hood Turnkey Lab Solution

2 Laboratory Furniture Product Personal Lab Planning Services We are Manufacturer and Distributor of Laboratory Furniture & Provide of Laboratory Layout, Design & Workflow Services Products Include : Base Cabinets, Wall Cabinets, High Cabinets, Fume Hoods, Laboratory tables, Sinks, Water & Gas Fixtures, Waste Fittings, Electrical Raise Your Quality and Lower your badget Budget Capabilities Include : Development Of Laboratory Designs From User Concepts Through Manufacturing & Installation Services We will gather all the information from the smallest to concept details, then return with conceptual drawings and estimates with no obligation. We turn your needs, concerns, safety requirements and concepts into deta ils, solutions, designs and a laboratory that is exactly what customer wants.

3 Laboratory Furniture Product 3D Design and Color Simulation Laboratory in the Container Various Scope Of Work We could design and simulate your desire laboratory set up on various space such as container and also renovate and improve your lab with our renova Laboratory for Renovation Turn Key Project Tel sales@ndn.co.th

4 Difference Worktops We have difference worktops material to fulfill your working requirement Epoxy Resin Worksurfaces are made using superior quality quartz sand and epoxy mixed with special bond formulated to achieve optimum chemical resistance. Epoxy resin worktops have excellent mechanical strength and flatness, and are manufactured to precise dimensions. They are durable, easy to clean and heat resistance with standard thicknesses of 19 mm Epoxy Resin Phenolic Resin Phenolic Resin Worksurfaces are available in a wide range of colours and are available in standard thicknesses of 16 mm., 20 mm. and 25 mm. Phenolic resins are good chemical resistance, excellent impact resistance, economic panel sizes, scratch resistance & durable all round performance and Good cleanability Stainless Steel Worksurfaces are durable, easy to clean and heat resistance, chemical resistance. Standard thicknesses of 16 mm. and 19 mm. Stainless Steel Melamine laminate Worksufaces with high density particle board cores. Standard thicknesses of 28 mm. Melamine laminate Granite Granite Worksufaces are available in a wide range of colours. Standard thicknesses of 19 mm

5 SINKS Fiberglass Reinforced OUR sinks are available in fiberglass reinforced,stainless steel and polypropylene. Fiberglass reinforced and stainless steel sink are casted in one piece with coved corners. In addition, the bottom of sink is designed to slope to the drain to ensure easy cleaning. Stainless Steel FITTINGS AND OTHER Water Fittings / Gas Valve / Air Valve / Vacuum Valve

6 GENERAL SPECIFICATION FUME HOOD IS A HIGH PERFORMANCE UNIT FOR USE IN WIDE VARIETY OF LAB. THE DESIGN IN CORPPRATED AN AUTMATIC BYY-PASS TO ELIMINATE HIGH FACE VELOCITIES. DESIGN AND INSTALLATION ACCORADANCE TO STANDARD. FUME HOOD ARE 4 SIZE AVAILABLE 1200mm. Hood Width FHF120 FHF150 FHF180 FHF200 Exterior Dimension (LxWxH) cm. Interior Dimension (LxW) cm. Storage Exterior Dimension (LxWxH) cm. Construction 120x85x x85x x85x x85x x67 130x67 160x67 180x67 120x85x85 150x85x85 180x85x85 200x55x85 Baffle system : Fiberglass, Polypropylene Hood exterior : Fiberglass, Steel with Epoxy Powder Coating Hood Interior : Fiberglass, Polypropylene

7 BASIC TYPES OF FUME HOODS SASH OPEN SASH CLOSED SASH OPEN SASH CLOSED AIR BY-PASS The By-Pass Hood is designed in such a manner that closing the front sash causes a redistribution of the air entering the hood through the sash opening, eliminating high velocity air streams in the near closed position of the sash. The By-Pass opening above the sash minimizes fluctuations in face velocity as the sash is raised or lowered. The By-Pass Hood is more desirable for use with fragile apparatus and instrumentation since face velocity does reach levels which might be detrimental to experimentation. AUXILIARY INDUCED AIR The Add-Air Hood provides a means of introducing outside air to the hood exhaust and limits the percentage of room air exhausted from the laboratory. The Add-Air Hood requires a separate duct system for the introduction of the outside air directly to the fume hood, and an additional blower system for this ductwork. The Add-Air Hood offers a convenient means of supplying up to 50% of the exhaust capacity of the hood with untempered air. When outside temperatures are extreme, we recommend that the Add-Air supply be tempered.

8 Case made from Epoxy powder coated Galvanized steel Laminated Safety Glass Sash with Epoxy Poder Coated Steel frame Automatic VAV Programmable Computer Control with audio-visual alarm Media Outlet Front Controlled Valve for Water and Gases Epoxy Molded Working Surface Light ON/OFF Switch Six Adjustable feet Universal Electric Outlet Inner lining and baffle made from Fiberglass / Phenolic Resin (optional) Movable Gas Storage and General Storage

9 BLOWER AND CONTROL Case will be Injection Molded PE s Impellor will be Backward,high pressure type, Injection Molded PPs Electronics control Programmable CPU with audible and visual alarm Motor will be TEFC types PLUMBINGS Standards Type L copper tube will be used for clean water, air and gases Plastics or Stainless Steel will be used for Demineralized or Distilled Water PP,PE will be used for Drain Lines. Glass Drain Line will be option request. LABORATORY FITTINGS GAM fitting coated with fluidized beb polyamide in varity color. BROEN coated with powder lacquer.