SECTION 1. FireBreak Downlights

Transcription

1 SECTION 1 FireBreak Downlights

2 FireBreak Qr5 Page 16 FireBreak Qr10 FireBreak Qr10 Tilt Page17 Page 18 FireBreak Qr10 CCT Page 19 FireBreak Qr10 CCT Auto Page 20 FireBreak Qr Accessories Page 22 FireBreak GU10 LED Page 24 FireBreak GU10 Twist & Lock Page 26 FireBreak Bathroom Page 28 FireBreak Standard Page 29

3 The Reasons You Need FireBreak Part B The purpose of Part B is to ensure building structures provide adequate protection to personnel to allow the safe evacuation of a building structure/complex. The regulation has been a legal requirement since A new version of the standard has been issued in 2006 and came into effect in April The level of resistance required is proportional to the risk involved and the location of adjacent dwellings. For the domestic market 30 or 60 minutes is normal however under extreme conditions 90 minutes is required. B3 Section 7 covers fire stopping and specifically states Consideration should be given to the effects of services that may be built into the construction that could adversely effect its fire resistance, for instance where downlighters, loudspeakers or other electrical accessories are installed All FireBreak products are tested for 30, 60 and 90 minute ceiling constructions. Part C New building materials and associated construction methods are altering the way in which new properties are manufactured. There is a move towards breathable membranes for roofs; these replace traditional bitumen coated roofing felt and negate the need to provide ventilated eaves to roofs. The material allows water vapour to permeate from the roof area out to the surrounding environment but remains impervious to external moisture. The material is much lighter and allows a roof to be completed at ground level and lifted into position on the dwelling creating a water tight environment under which construction can continue. There is no longer a need to provide ventilated eaves. For this reason the amount of moisture that can enter a cold roof void must be controlled; thus anything which punctures the seal must be considered. Light fittings and loft hatches are good examples of intrusions into the roof area that can facilitate the passage of moisture. Part 6.2 of Part C of the Building Regulations states that To avoid excess transfer of moisture into roof voids, gaps and penetrations for pipes and electrical wirings should be filled and sealed: this is particularly important in areas of high humidity e.g Kitchens and Bathrooms. For this reason the FireBreak range of downlights are supplied with moisture seals. Part E The term Part E refers to the new Approved Document E of the Building Regulations. Part E came into effect on 1 July 2003 and details new acoustic performance requirements in England and Wales for residential dwellings, schools and other construction types. Along with new performance requirements, Part E also establishes a need for Pre-Completion Testing to enforce these standards and suggests a range of constructions for appropriate elements. The key elements for residential dwellings are separating walls and floors between dwellings and internal partitions within dwellings. Both new build dwellings and those new dwellings created by what Part E describes as Material Change of Use are covered. Material Change of Use relates to what would be more commonly known as refurbishment and conversion work. The information provided here applies to dwellings. For advice on other constructions, including schools, please contact the Key to Part E Customer Hotline Why are there new standards in Part E necessary? Significant attention is now being paid to the issue of unwanted noise transmission within buildings and, in particular, to noise transmission within residential dwellings. The new standards in Part E are designed to improve modern living standards. All FireBreak products are fitted with acoustic seals to provide the necessary attenuation to meet the requirements of Part E. We have also tested at 0.5m spacings to facilitate additional luminaire densities required for bathrooms and other similar areas. Part L The new 2014 revised Part L Building Regulations came into force for domestic and non-domestic new build and refurbishments on 6th April The table below provides guidance on the specification of fixed internal and external lighting for new and existing dwellings to meet relevant energy efficiency requirements for compliance of part L1A/B as per section 12 of the Domestic Building Services Compliance Guide: 2013 Edition. Recommended minimum standards for domestic fixed internal and external lighting. Lighting New and replacement systems Supplementary information Fixed internal lighting Fixed external lighting a. In the areas affected by the building work, provide low energy light fittings (fixed lights or lighting units) that number not less than three per four (75%) of all the light fittings in the main dwelling spaces of those areas (excluding infrequently accessed spaces used for storage, such as cupboards and wardrobes). b. Low energy light fittings should have lamps with a luminous efficacy greater than 45 lamp lumens per circuit-watt and a total output greater than 400 lamp lumens. c. Light fittings whose supplied power is less than 5 circuit-watts are excluded from the overall count of the total number of light fittings. Where fixed external lighting is installed, provide light fittings with the following characteristics: a. Either: i. lamp capacity not greater than 100 lamp-watts per light fitting; and ii. all lamps automatically controlled so as to switch off after the area lit by the fitting becomes unoccupied; and iii. all lamps automatically controlled so as to switch off when daylight is sufficient b. Or i. lamp efficacy greater than 45 lumens per circuit watt; and ii. all lamps automatically controlled so as to switch off when daylight is sufficient; and iii. light fittings controllable manually by occupants. Light fittings may be either: dedicated fittings which will have separate control gear and will take only low energy lamps (e.g. pin based fluorescent or compact fluorescent lamps); or standard fittings supplied with low energy lamps with integrated control gear (e.g. bayonet or Edison screw base compact fluorescent lamps). Light fittings with GLS tungsten filament lamps or tungsten halogen lamps would not meet the standard. A single switch should normally operate no more than six light fittings with a maximum total load of 100 circuit-watts. The table below provides the recommended minimum lighting efficacy in new and existing non-domestic dwellings. For compliance of part L2A/B as per section 12 of the Non-Domestic Building Services Compliance Guide: 2013 Edition. Alternatively you can calculate using the LENI (Lighting Energy Numeric Indicator) method. The LENI method calculates the performance of lighting in terms of energy per square metre per year. For more information on calculating using the LENI method see section 12.5 of the above document. Recommended minimum lighting efficacy in new and existing buildings. Lighting Type Lighting efficacy (%) General lighting in office, industrial and storage areas General lighting in other types of space The average initial efficacy should be not less than 60 luminaire lumens per circuit-watt. The average initial efficacy should be not less than 60 lamp lumens per circuit-watt. Display lighting The average initial efficacy should be not less than 22 lamp lumens per circuit-watt. 12

4 FireBreak Fully Tested For All 30, 60 & 90 Minute Timber Joist Ceilings FireBreak downlights ensure that they meet and comply with the current Building Regulations Document Part B. For more information see the reasons you need FireBreak section Part B (Fire Safety) on the opposite page. 30 Minute using Single Layer 15mm Standard Wallboard 60 Minute using Two Layers of 12.5mm Fireboard 90 Minute using Two Layers of 15mm Fireboard FireBreak is also fully Acoustically tested and Part E compliant. If you would like copies of any of the FireBreak approvals please contact us by telephone on or us info@ksr-lighting.com 13

5

6 FireBreak Qr Range - Features & Benefits - 5W LED Non-Dimmable Downlight 10W LED Dimmable Downlight Tiltable Version Available in 10W Available In 3000K, 4000K or 6000K Detachable Rims for Fixed and Tiltable Conversion Plate Also Available for Fixed Downlight IP65 3 Year Warranty 46 Beam Angle Push Fit Loop-in/Loop-out Terminals Suitable for Solid or Stranded Cables Comparable with 50W Halogen and Low Voltage Halogen Emergency 3 Hour Maintained Versions Available Fully Tested for all 30, 60 and 90 Minute Timber Joist Ceilings Compliant with Part L1 & L2 of the Building Regulations

7 Firebreak Downlights - FireBreak Qr5 Warranty: 3 Years 5W 3000K or 4000K LED 3000K lumens 4000K lumens CRI: Ra84 Life Expectancy: Up to 40,000 hours Beam Angle: 46 IP65 Non-Dimmable Available in 3 Hour Emergency KSRFRD371 KSRFRD370 KSRFRD370 72mm 65mm 85mm 54mm KSRFRD KSRFRD371 Body Cast Aluminium Rim Aluminium Finish: White (See Pages for colour rim options) Lamp Types: 5W 3000K or 4000K LED Included See pages for additional colour rim options Code Description KSRFRD370 Fire Rated 5W 3000K LED Non-Dimmable Downlight KSRFRD370/EM 3 Hour Emergency Fire Rated 5W 3000K LED Non-Dimmable Downlight KSRFRD371 Fire Rated 5W 4000K LED Non-Dimmable Downlight KSRFRD371/EM 3 Hour Emergency Fire Rated 5W 4000K LED Non-Dimmable Downlight 16 Products supplied complete with lamp

8 FireBreak Downlights - FireBreak Qr10 Warranty: 3 Years 10W 3000K or 4000K LED 3000K lumens 4000K lumens CRI: Ra84 Life Expectancy: Up to 40,000 hours Beam Angle: 46 IP65 Dimmable Available in 3 Hour Emergency List of dimmers available from KSRFRD350 KSRFRD351 KSRFRD350 72mm 65mm 85mm 54mm KSRFRD351 KSRFRD See pages for additional colour rim options Code Description KSRFRD350 Fire Rated 10W 3000K LED Dimmable Downlight KSRFRD350/EM 3 Hour Emergency Fire Rated 10W 3000K LED Dimmable Downlight KSRFRD351 Fire Rated 10W 4000K LED Dimmable Downlight KSRFRD351/EM 3 Hour Emergency Fire Rated 10W 4000K LED Dimmable Downlight Body Cast Aluminium Rim Aluminium Finish: White (See Pages for colour rim options) Lamp Types: 10W 3000K or 4000K LED Included Products supplied complete with lamp 17

9 15 FireBreak Downlights - FireBreak Qr10 Tilt Warranty: 3 Years 10W 3000K or 4000K LED 3000K lumens 4000K lumens CRI: Ra84 Tilt: 15 Life Expectancy: Up to 40,000 hours Beam Angle: 46 IP65 Dimmable Available in 3 Hour Emergency List of dimmers available from KSRFRD362 KSRFRD361 KSRFRD361 74mm 85mm 85mm KSRFRD KSRFRD362 Body Mild Steel Rim Aluminium Finish: White (See Pages for colour rim options) Lamp Types: 10W 3000K or 4000K LED Included See page 22 for additional colour rim options Code Description KSRFRD361 Fire Rated 10W 3000K LED Tiltable Dimmable Downlight KSRFRD361/EM 3 Hour Emergency Fire Rated 10W 3000K LED Tiltable Dimmable Downlight KSRFRD362 Fire Rated 10W 4000K LED Tiltable Dimmable Downlight KSRFRD362/EM 3 Hour Emergency Fire Rated 10W 4000K LED Tiltable Dimmable Downlight 18 Products supplied complete with lamp

10 FireBreak Downlights - FireBreak Qr10 CCT Warranty: 3 Years 10W Triple Colour LED 3000K lumens 4000K lumens 6000K lumens CRI: Ra84 Life Expectancy: Up to 40,000 hours IP65 Dimmable Beam Angle: 46 Available in 3 Hour Emergency List of dimmers available from KSRFRD360 KSRFRD360 73mm 74mm KSRFRD360 84mm KSRFRD360 See pages for additional colour rim options Code Description KSRFRD360 Fire Rated 10W 3000K/4000K/6000K LED Dimmable Downlight KSRFRD360/EM 3 Hour Emergency Fire Rated 10W 3000K/4000K/6000K LED Dimmable Downlight Body Cast Aluminium Rim Aluminium Finish: White (See Pages for colour rim options) Lamp Types: 10W 3000K/4000K/6000K LED Included Products supplied complete with lamp 19

11 Qr10 CCT Auto Downlight The KSRFRD366 switchable CCT LED downlights offer a great solution to wholesalers and installers alike, with reduced stock holding and having the ability to select warm white, neutral white or cool white output from one downlight and the move to this increasingly popular technology continues. Most switchable CCT downlights need to have the colour selected prior to installation, where once installed it is fixed until the fitting is removed, KSR have gone one better We are pleased to launch the next generation of switchable CCT downlights by designing a new innovative product that gives the user of the lights the power to change the colour temperature from the wall switch or dimmer whenever they need to. The popular Qr10 downlight can be switched between 3000K Warm White, 4000K Neutral White or 6000K Cool White, so whether entertaining, relaxing or just fancy a change the Qr10 CCT Auto will offer the perfect solution. Add to this our market leading dimming compatibility you simply don t need any other downlight. Once installed or whenever you fancy, simply switch the fitting off then on again within 3 seconds and the colour temperature will change 3000K 4000K 6000K 3000K., wait 10 seconds for the memory to set itself and that s it, the lighting is now set for everyday use. It s that simple. The Qr10 CCT Auto is fully dimmable with the approved list of popular UK available dimmers including MK, Zano, Danlers, Varilight, Deta, BG and Hamilton. Please visit our website at for further details and the list of specific dimmer models that can be used. The Qr10 CCT Auto downlight is fully fire tested for 30,60 & 90 minute ceiling constructions providing complete piece of mind to the installer and home owner. The range includes a selection of quick fit replaceable bezels in Chrome, Satin Chrome, Brass, Antique Brass, Matt Black and a 316L Stainless Steel bezel for external applications, more details of which can be found on page 22 of this catalogue. For more information on this innovate product or to download the full data sheet please visit our website and search KSRFRD366

12 FireBreak Downlights - FireBreak Qr10 CCT Auto Warranty: 3 Years 10W Triple Colour LED 3000K lumens 4000K lumens 6000K lumens CRI: Ra84 Life Expectancy: Up to 40,000 hours IP65 Dimmable Beam Angle: 46 Available in 3 Hour Emergency List of dimmers available from KSRFRD366 Output + N N Tc - L KSRFRD350/351 INPUT: V AC 50Hz INPUT: 0.045A 10W MAX PFC:0.9 OUTPUT:200mA MAX OUTPUT:30-40VDC Ta:40 C Tc:70 C 27mm L KSRFRD366 45mm 72mm 124mm 75mm 54mm 65mm 85mm KSRFRD366 KSRFRD366 Change CCT via wall switch/dimmer (Please note switch or dimmer not included) Code KSRFRD366 See pages for additional colour rim options Body Cast Aluminium Rim Aluminium Description Fire Rated 10W 3000K/4000K/6000K LED Dimmable Auto Downlight Finish: White (See Pages for colour rim options) Lamp Types: 10W 3000K/4000K/6000K LED Included Products supplied complete with lamp 21

13 FireBreak Downlights - FireBreak Qr Accessories Fixed rims suitable for Qr5, Qr10, Qr10 CCT and Qr10 CCT Auto range. Tilt rims suitable for Qr10 Tilt on page 18. Stainless Steel option for external applications. KSRFRD352 74mm 3.5mm 85mm KSRFRD353 KSRFRD354 72mm KSRFRD KSRFRD355 KSRFRD359 85mm KSRFRD369 KSRFRD363 KSRFRD /359/369 3mm Body Aluminium Finishes: Antique Brass, Black, Brass, Chrome, Satin Chrome or Stainless Steel Code KSRFRD352 KSRFRD353 KSRFRD354 KSRFRD355 KSRFRD359 KSRFRD363 KSRFRD364 KSRFRD365 KSRFRD369 KSRFRD364 Description FireBreak Qr Chrome Detachable Rim FireBreak Qr Satin Chrome Detachable Rim FireBreak Qr Brass Detachable Rim FireBreak Qr Black Detachable Rim FireBreak Qr Stainless Steel Detachable Rim FireBreak Qr Tilt Chrome Detachable Rim FireBreak Qr Tilt Satin Chrome Detachable Rim FireBreak Qr Tilt Black Detachable Rim FireBreak Qr Antique Brass Detachable Rim KSRFRD Products supplied less fitting

14 FireBreak Downlights - FireBreak Qr Accessories IP20 Qr converter plate suitable for the Qr5, Qr10 and Qr10 CCT fixed downlight range. *Please note: When ordering the Chrome or Satin Chrome converter plate you will need to order the standard rim to match (KSRFRD352 - Chrome or KSRFRD353 - Satin Chrome) KSRFRD356 KSRFRD357* mm 170mm KSRFRD358* KSRFRD mm Code KSRFRD356 KSRFRD357 KSRFRD358 Description FireBreak Qr Converter Plate White FireBreak Qr Converter Plate Chrome* FireBreak Qr Converter Plate Satin Chrome* *Shown with additional rim options Body Aluminium Finishes: Chrome*, Satin Chrome* or White Products supplied less fitting 23

15 FireBreak Downlights - Fire Rated GU10 LED Downlights Warranty: 2 Years 7W 3000K or 4000K LED Dimmable (Visit website for list of recommended dimmers) IP20 Available in 3 Colour Options KSRFRD310 CH KSRFRD312 & KSRFRD mm 76mm KSRFRD310 & KSRFRD311 87mm KSRFRD302 76mm 90mm 76mm 120mm 120mm 121mm KSRFRD311 SC 87mm 100mm 86mm KSRFRD302 KSRFRD311/313 KSRFRD301 KSRFRD300 90mm 86mm KSRFRD310/312 KSRFRD300 Body Pressed Steel Finishes: Chrome, Satin Chrome or White Lamp Types: 7W GU K 530 lumen LED Lamp or 7W GU K 530 lumen LED Lamp Included 120mm 120mm 76mm 100mm KSRFRD312 WHT KSRFRD301 Code KSRFRD310 KSRFRD311 KSRFRD312 KSRFRD313 Description Fire Rated 7W 3000K 530 Lumen Dimmable GU10 LED Twist & Lock Downlight Fire Rated 7W 3000K 530 Lumen Dimmable GU10 LED Twist & Lock Tilt Downlight Fire Rated 7W 4000K 530 Lumen Dimmable GU10 LED Twist & Lock Downlight Fire Rated 7W 4000K 530 Lumen Dimmable GU10 LED Twist & Lock Tilt Downlight Products supplied complete with lamp 24

16 FireBreak Downlights - Fire Rated GU10 IP65 LED Downlights Warranty: 2 Years 7W 3000K or 4000K LED Dimmable (Visit website for list of recommended dimmers) IP65 Available in 3 Colour Options KSRFRD314 WHT KSRFRD315 KSRFRD315 SC KSRFRD314 76mm 121mm KSRFRD314 CH 87mm KSRFRD Code KSRFRD314 KSRFRD315 Description Fire Rated 7W 3000K 470 Lumen Dimmable GU10 LED IP65 Downlight Fire Rated 7W 4000K 470 Lumen Dimmable GU10 LED IP65 Downlight Body Pressed Steel Finishes: Chrome, Satin Chrome or White Lamp Types: 7W GU K 470 lumen LED Lamp or 7W GU K 470 lumen LED Lamp Included Products supplied complete with lamp 25

17 FireBreak Downlights - FireBreak GU10 Twist & Lock Warranty: 1 Year 3 Colour Options GU10 Lamp Not Included KSRFRD300 SC KSRFRD301 CH 121mm 76mm 87mm KSRFRD302 90mm 86mm KSRFRD300 KSRFRD mm 120mm 76mm 100mm KSRFRD301 KSRFRD301 KSRFRD300 WHT shown with Retro-fit LED lamp Body Pressed Steel Finishes: Chrome, Satin Chrome or White Code KSRFRD300 KSRFRD301 Description Fire Rated 50W GU10 Twist & Lock Downlight Fire Rated 50W GU10 Twist & Lock Tiltable Downlight Lamp Types: 50W GU10 Halogen Lamp Not Included Products supplied less lamp 26

18

19 FireBreak Downlights - FireBreak Bathroom Warranty: 1 Year 3 Colour Options IP65 GU10 Lamp (Not Included) KSRFRD302 CH KSRFRD302 SC shown with Retro-fit LED lamp 76mm 121mm 87mm KSRFRD302 KSRFRD302 WHT Body Pressed Steel Finishes: Chrome, Satin Chrome or White Lamp Types: 35W GU10 Lamp Not Included Code KSRFRD302 Description Fire Rated 35W GU10 Mains Halogen IP65 Downlight 28 Products supplied less lamp

20 FireBreak Downlights - FireBreak Standard GU10 Warranty: 1 Year 3 Colour Options GU10 Lamp (Not Included) KSRFRD108 WHT KSRFRD108 CH 112mm 66mm 86mm KSRFRD108 KSRFRD108 SC Code KSRFRD108 Body Pressed Steel Description Fire Rated 50W GU10 Mains Halogen Downlight Finishes: Chrome, Satin Chrome or White Lamp Types: 50W GU10 Halogen Lamp Not Included * * With Earth Provision Lamp Options KSRLP932 7W 3000K 530 Lumen Dimmable LED GU10 Lamp KSRLP933 7W 4000K 530 Lumen Dimmable LED GU10 Lamp Products supplied less lamp 29

21