Dome & Pyramid Rooflights

Transcription

1 BMDS CPR CE Marking Declaration of Performance Product Group Dome & Pyramid Rooflights Declaration Reference: CE-MDM Unique identification code of the product-type: Individual dome rooflight with kerb or to fit existing upstand Specific identification information is contained on the shipping / delivery notes. 2. Type, batch or serial number or any other element allowing identification of the construction product as required under Article 11(4) of the CPR: Type number allowing identification is provided on the shipping / delivery note. 3. Intended use or uses of the construction product, in accordance with the applicable harmonized technical specification, as foreseen by the manufacturer: Individual dome rooflight with or without upstand, intended to be used for daylighting in flat roofs. 4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required under Article 11(5):, Sandford Close, Aldermans Green Industrial Estate, Coventry, CV2 2QU Tel Fax covsales@brettmartin.com 5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2): Bill Hawker, Technical Director,, Sandford Close, Aldermans Green Industrial Estate, Coventry, CV2 2QU 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in CPR, Annex V: System 3 7. In case of the declaration of performance concerning a construction product covered by a harmonized standard: EN 1873 : 2005 Notified body Laboratoire National de Métrologie et d'essais (LNE) (NB 0071) carried out tests on reaction to fire under system 3. Notified body British Board of Agrément (BBA) (NB 0836) carried out tests on resistance to upward and downward loads under system 3. Sandford Close Aldermans Green Ind. Estate, Coventry England, CV2 2QU Tel +44 (0) Fax +44 (0) daylight@brettmartin.com Registered in England No Page 1 / 2

2 Declaration Reference: CE-MDM Declared performance: 0071, 0836 Coventry, CV2 2QU 13 EN 1873 : 2005 Individual dome rooflight with or without upstand, intended to be used for daylighting in flat roofs. External fire performance: BROOF (t4) Reaction to fire: B, s1, d0 Water tightness: Pass Shatter properties (safe breakability) as: - Small hard body impact resistance - Large soft body impact resistance (assembly) Performance to ACR(M)001 declared separately Resistance to upward load: UL 1500 Resistance to downward loads: DL 1125 Thermal transmittance: Direct airborne sound insulation: Luminous transmittance: Air permeability: Durability: 9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Name Bill Hawker Function Technical Director Signature Place & date of Issue BMDS 19-Jun-13 Sandford Close Aldermans Green Ind. Estate, Coventry England, CV2 2QU Page 2 / 2

3 4 Installation: Mardome Ultra onto builders upstand Triple skin / unvented & vented 0 Parts in this Mardome kit Dome Outer Direct Fix (DF) kerb (Please unpack and check all parts are included and undamaged) 1 Kerb Installation 1c Kerb fastener: Fix on inner side of kerb on all sides Builders upstand Number per side 1b Position kerb Length of side DF Kerb fastener Key 125mm 600, , 1050, , (Supplied in packs of 5) 2 1a Mastic / silicone around roof opening TECHNICAL BULLETIN April 2011

4 2 Dome Installation 2a Position Dome onto kerb 2b Rotate Latch 1/4 turn whilst firmly holding dome down to secure Roof covering External kerb dimension (incl. roof covering) = Dome Size Nominal 75mm overall Further Information Key opening of Ultra Latch 2. Unlock end 4. If dome removal is required then the series of latches around the kerb can be released Twist latch clockwise, the bottom half will fall out. This is a security feature to prevent unlocking without the unique key. 2. Insert the unlocking end of the supplied red key into the bottom of the latch and push upwards until you feel it clunk into place. 3. Twist 1/4 turn clockwise to open 4. Lift off dome assembly Lock end For re-fitting follow section 2 using the locking end of the supplied red key, turning counter clockwise Roof covering External kerb dimension (incl. roof covering) = Dome Size Nominal 75mm overall FOR ANY TECHNICAL INFORMATION/QUERIES PLEASE CONTACT YOUR SUPPLIER The manufacturer operates a policy of continuous product improvement, and reserves the right to alter specifications at any time without notice. Every effort has been taken to ensure all details contained in this document are correct at time of going to press but this document should be used only as a guide and does not in any way form part of a contract or warranty. It is the customer s responsibility to ensure that the product is suitable for the actual conditions of use, which are beyond the control of the manufacturer.

5 PRODUCT SAFETY AND HANDLING DATA SHEET Mardome Rooflights Manufacturer: Product Description: Handling: Stacking and Storage: Maintenance: Sandford Close Alderman s Green Industrial Estate Coventry CV2 2QU Brett Martin Daylight Systems Mardome Rooflights are made from polycarbonate glazing and PVC kerb, under an ISO9001:2000 approved design and manufacturing system. They are available clear, or with a diffused surface to provide even light distribution without loss of light transmission. They are also available with tinted or opal glazing. The polycarbonate weather surface has a co-extruded UV resistant layer to prevent ultra violet damage to the substrate. The PVC kerb is Lead & Cadmium free. Both the polycarbonate and PVC have been tested in accordance with BS476:part 7, and achieve a Class 1/TP(a) fire ratings. Brett Martin Daylight Systems Mardome rooflights may have sharp edges and corners and should be regarded as a hazard; protective measures such as gloves and safety clothing should be worn when handling. The domes should be handled by a minimum of two people and more where appropriate, the large domes and opening vents can be heavy and awkward to handle. Mardome rooflights are usually delivered in individual packaging facilitating unloading and manouvering by hand. Smaller domes are boxed whilst large domes are in protective packing on a pallet. For large orders domes may be stacked on a pallet. If forklifts are used to lift a stack care must be taken to avoid damage. Mardome rooflights should not be exposed to weather before installation. They should be stored indoors if possible, or under cover to prevent damage from rain and sun. Do not remove the protective packaging until ready to be installed, to protect against surface scratching. In typical UK conditions, we would expect these domes to remain serviceable well in excess of 20 years, subject to correct maintenance. Rooflights should be inspected for damage every year. Rooflights should be cleaned using warm water and mild detergent to prevent any growth which may attack the protective surface, or dirt accumulation which could lead to heat build up. For cleaning off spillages such as paint or bituminous products suitable solvents include: White Spirit; Isopropanol; Petroleum ether (BP 65); Butanol; Ethyl or Methyl alchohol. Always apply at room temperature and not in direct sunlight, then follow general cleaning instructions as above. The use of harsh chemicals or abrasive cleaners must be avoided. Rooflights should not be painted over with an opaque covering. This can be dangerous, and may cause premature failure. COSHH DATA SHEET Mardome Dome Rooflights June 12

6 CDM Regulations: CDM Regulations require that all risks are assessed and minimised, but do not define any specific measures required to achieve this. HSE Guidance Notes to CDM Regulations refer to unprotected fragile roofing materials as a typical hazard to be avoided. Mardome rooflights can be regarded as non-fragile to ACR[M]001 when new and fully fixed, provided fixed to a roof assembly which is non-fragile without rooflights. For details on handling and installation recommendations see the relevant Technical Bulletins for the dome option. Health Data: Brett Martin Daylight Systems Mardome rooflights present no hazards to health. inhalation: There are no significant risks from inhalation. skin contact: There are no significant risks from skin contact. ingestion: The polycarbonate glazing and PVC kerb have very low toxicity and may be considered biologically inert eye contact: Treatment for particles of polycarbonate and PVC dust caught in the eye, (for example swarf from fasteners) is as for any other form of dust. Flush the eye with copious quantities of clean water and seek medical attention. Fire and Explosion Hazard Data: Brett Martin Daylight Systems Mardome Rooflights have been tested in accordance with BS476 part 7. They burn with difficulty and generally require a continuous external flame source to sustain combustion. Without flashover fire conditions they will tend to self extinguish. In the event of a fire cool with water. Alderman s Green Ind Est Coventry CV2 2QU Tel: daylight@brettmartin.com