ELECTRICAL WORKS RELATED TO AC & UPS OF CMP GOC & IAD, LINGAMPALLY, HYDERABAD IN TWO BID SYSTEM THROUGH E-TENDER PRICE BID

Transcription

1 SBI INFRA MANAGEMENT SOLUTIONS PVT.LTD. 3 rd Floor, Local Head Office,Bank Street, Koti, Hyderabad On behalf of On behalf of On behalf of Cash Management Product GOC (CMP GOC) & Internal Audit Department(IAD) lingampally invites tenders for ELECTRICAL WORKS RELATED TO AC & UPS OF CMP GOC & IAD, LINGAMPALLY, HYDERABAD IN TWO BID SYSTEM THROUGH E-TENDER PRICE BID The Technical and price bid to be submitted online on M/s E- Procurement Technologies Ltd.websitehttps://sbi.abcprocure.com/EPROC. E-TENDER IS INVITED FROM THE EMPANELLED CONTRACTORS OF LHO, HYDERABAD FOR ELECTRICAL WORKS UPTO Rs. 15 lakhs ARE ELIGIBLE TO QUOTE. TENDER NO.: SBIIMS/29/18 Signature of The Contractor Page 1 of 14

2 AC & UPS WORKS OF IA AND CMP GOC WORKS SL NO Description unit Qty Unit price Total Amount 1 Supply, installation, concelling and fixing of following items: TPN DBs - VTPN DB, IP43, IK 09 with metal door 4 way DB model No: , Qty:1 DPX 160, Icu 36KA, 100A, 4 pole MCCB model No: Qty:1 D curve 32 Amps single pole MCB (Model No: ) Qty:12. Complete the work as directed by the SBIIMS. Pupose: AC DB No Supply, installation, concelling and fixing of following tems: 1 no of DP enclosure(model No: ) with one no of 2 pole 32A MCB(Model No ).Complete the work as directed by the SBIIMS. Purpose: AC DB to SUb DB at various locations inside the room Supply, Installation, concelling and fixing of following items: TPN DBs- VTPN DB, IP43 with acrylic door, 4 way DB(model NO: ) -Qty:1 D curve 4 pole 63A MCB (Model No: ) Qty:1, SPN MCB: Qty :8. Complete the work as directed by the SBIIMS Purpose: Raw Power DB No 9 No 1 Signature of The Contractor Page 2 of 14

3 4 5 Supply, Installation, concelling and fixing of following items SPN DB IP 43 IK 09 with acrylic door 12 way DB( model No: ) Qty:1 63 Amps 2 pole MCB D curve( model No: ) Qty-1 16Amps 2 pole MCB (model No: ) Qty:8. Complete the work as directed by SBIIMS Purpose: UPS DB Supply, laying, Testing and commissioning of 16sqmm 4 core copper armoured LT XLPE insulated PVC sheathed FRLS armoured cable 1.1 KV grade confirming to extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS7098 (part-i) The scope of work includes civil works like excavation and back filling. Complete the work as directed by the SBIIMS.Purpose: panel to AC DB input No 1 rmt 70 6 Termination of the cable with suitable double compression gland and canopy. Complete the work as directed by the SBIIMS No 2 Signature of The Contractor Page 3 of 14

4 7 Supply, laying, Testing commissioing and termination of 4sqmm 3 core copper armoured LT XLPE insulated PVC sheathed FRLS armoured cable 1.1 KV grade confirming to extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS7098 (part-i) The scope of work includes civil works like plastering andconcelling if required etc. Comple the work as directed by the SBIIMS Purpose: AC DB to AC individual control to AC outdoor unit Rmt Termination of the cable with suitable double compression gland and canopy. Complete the work as directed by the SBIIMS Supply, laying, Testing and commissioing of 10sqmm 4 core copper armoured LT XLPE insulated PVC sheathed FRLS armoured cable 1.1 KV grade confirming to extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS7098 (part-i) The scope of work includes civil works like excavation and backfilling and plastering if required etc..comple the work as directed by the SBIIMSPurpose: PANEL to UPS1 & UPS2 and Panel to raw power DB No 18 Rmt Termination of the cable with suitable double compression gland and canopy. Complete the work as directed by the SBIIMS No 8 Signature of The Contractor Page 4 of 14

5 11 Supply, laying, Testing and commissioing of 10sqmm 3 core copper armoured LT XLPE insulated PVC sheathed FRLS armoured cable 1.1 KV grade confirming to extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS7098 (part-i) The scope of work includes civil works like plastering if required etc. and also supplying and laying of fine river sand with shabad stones for cable protection of the cables. Comple the work as directed by the SBIIMS Purpose: UPS o/p DB to UPS DB inside the room Rmt Termination of the cable with suitable double compression gland and canopy. Complete the work as directed by the SBIIMS Supply, laying, termination and dressing of 1.1KV XLPE PVC Insulated 10sqmm 4 core copper flexible cable. The scope of work includes laying of cable in a suitable metal hose flexible pipe.complete the work as directed by the SBIIMS. Purpose: UPS Input DB to UPS i/p Supply, laying and dressing of 1.1KV XLPE PVC Insulated 10sqmm 3 core copper flexible cable. The scope of work includes laying of cable in a suitable metal hose flexible pipe.complete the work as directed by thesbiims.purpose: Ups o/p to UPS o/p DB No 2 Rmt 30 Rmt 30 Signature of The Contractor Page 5 of 14

6 Supply, installation and fixing of 63/100 Amps 4 pole 36KV MCCB in a suitable metal enclosure. Complete the work as directed by the Bank. Output of this MCCB will be connected to UPS.Complete the work as directed by the SBIIMS. Purpose: UPS i/p DB Supply, installation and fixing of 100Amps2 pole MCB in a suitable metal enclosure. Complete the work as directed by the Bank. Output of UPS will be connected to this MCB. Purpose: UPS o/p DB Supply, installation and fixing of 100Amps 4 pole 36KV MCCB with suitable handle it has to be installed inside the distribution panel. The scope of work extending to power wiring from bas bar to MCCB & MCCB to Terminals and also supply& fixing of suitable terminals. Complete the work as directed by the SBIIMS. Purpose: AC, UPS, raw power i/p DB at panel room no 2 no 1 No 3 Signature of The Contractor Page 6 of 14

7 Providing independent earthing for sophisticated electronic equipment with 600 mm x 600 mm x 3.5 mm thick copper plate rigidly fixed to 40 mm dia G.I. pipe of 0.3 mtr length connected with reducer providing.gi. funnel with wiremesh as per national electric code including C.C. Chamber of size 400 mm x 400 mm x 400 mm covered with RCC slab filling with salt and charcoal giving earth connection from electrode copper G.I. strip of 50 mm x 6 mm x 200 mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) for UPS earthing.complete the work as directed by the SBIIMS.Purpose: Earthing for UPS Providing independent earthing for important equipment with 40 mm dia "B" class 2.5m long G.I pipe and 19mm dia "B" class G.I pipe of 0.3 mtr. Long connected with reducer providing G.I. funnel with mesh enclosed in C.C. Chamber of 400mm x 400 mm x 400 mm with RCC slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I. strip of 50 x 6 mm x 200 mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (part II)- for body earthing.complete the work as directed by the SBIIMS. Supply and run of 50 mm x 6 mm G.I. strip including cost of all accessories and labour charges etc. complete the work as directed by the SBIIMS No 2 No 2 rmt 10 Signature of The Contractor Page 7 of 14

8 Supply and run of 25 mm x 6 mm G.I. strip including cost of all accessories and labour charges etc. complete the work as directed by the SBIIMS Supply and run of 8SWG copper bear wire including cost of all accessories and labour charges etc. complete the work as directed by the SBIIMS Supply and run of 25 mm x 6 mm copper strip including cost of all accessories and labour charges etc. complete the work as directed by the SBIIMS Supply, laying and termination of 25 sqmm single core copper flexible cable in a suitable PVC conduit from neutral earth pit respective floor DBs earthing.complete the work as directed by the SBIIMS. rmt 50 rmt 100 rmt 12 rmt 60 TOTAL QUOTED AMOUNT FOR ELECTRICAL RELATED TO AC & UPS OF 2ND FLOOR OF IA -- PART-A Tiolet electrical works Signature of The Contractor Page 8 of 14

9 1 Supply and Concealed wiring in a stone mashonary wall for light, fan, exhaust fan, call bell / 5A plug points with 3 runs of 1.5 Sqmm P.V.C insulated FRLS copper conductor single core multi standard wire in PVC conduits with 3 plate ceiling rose etc. The scope of work including the supply of 6A modular switches / boxes & front plates. (the light and fan point no 14 wiring shall be concealed in the wall and replastered) the scope includes Extending existing light points below the false ceiling with 3core 1.5 sqmm flat wire in MS flexible pipe as required and terminate the wires with suitable lugs, complete in all respects by using approved make & quality items and directed by SBIIMS. 2 Same as the above 3 lights controlled by one switch.complete No 2 the work as directed by the SBIIMS. 3 Supply & fixing of 15 watts down lights.complete the work as directed No 8 by the SBIIMS. 4 Supply & fixing of 28 watts 4 feet ledlight.complete the work as No 1 directed by the SBIIMS. 5 Supply & Fixing of Exhaust fan. Complete the work as directed by No 4 the SBIIMS. 6 Supply & fixing of Hand Dryer. Basic Cost Rs Complete the No 1 work as directed by the SBIIMS. 7 Supply & fixing of Occupancy sensor. Complete the work as directed by the SBIIMS. No 1 TOTAL QUOTED AMOUNT FOR ELECTRICAL WORKS RELATED TO WASHROOMS OF 2ND FLOOR IA- PART B Signature of The Contractor Page 9 of 14

10 UPS at Ground floor works 1 Supply & Installation of 4 pole, 63Amps Manual changeover switch with suitable enclosure switch. No 2 Complete the work as directed by the SBIIMS. 2 Providing independent earthing for sophisticated electronic equipment with 600 mm x 600 mm x 3.5 mm thick copper plate rigidly fixed to 40 mm dia G.I. pipe of 0.3 mtr length connected with reducer providing.gi. funnel with wiremesh as per national electric code including C.C. Chamber of size 400 mm x 400 mm x 400 mm covered with RCC slab No 2 filling with salt and charcoal giving earth connection from electrode copper G.I. strip of 50 mm x 6 mm x 200 mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) for UPS earthing.complete the work as directed by the SBIIMS. 3 Supply & Installation of 25*6 MM copper flat.complete the work as Rmt 20 directed by the SBIIMS. 4 Supply &laying of 25 sqmm single core copper flexible cable.complete Rmt 15 the work as directed by the SBIIMS. 5 Supply &laying of 25sqmm 3 core copper flexible cable and it should be laid on a suitable metal rmt 20 house.complete the work as directed by the SBIIMS. 6 Supply & Installation of 63Amps 2 pole MCB with enclosure.complete the work as directed by the SBIIMS. No 2 TOTAL QUOTED AMOUNT FOR ELECTRICAL WORKS RELATED TO UPS AT GROUND FLOOR OF IA-- PART-C Signature of The Contractor Page 10 of 14

11 CMP- GOC UPS RELATED WORKS Supply, laying, Testing and commissioning of 16 sq mm 4 core copper armoured LT XLPE insulated PVC sheathed FRLS armoured cable 1.1 KV grade confirming to IS7098 (part-i). The scope of work clamping & dressing of cable. The complete the work as directed by the Bank. The cable has to be run from existing Panel & DB of ground & 2nd floor to respective panels. Complete the work as directed by the SBIIMS Supply, laying and dressing of 1.1KV XLPE PVC Insulated 16 sqmm 4 core copper flexible cable and with one run of 16 sqmm single core copper flexible cable for earthing. The scope of work includes laying of cable in a suitable metal hose flexible pipe The complete the work as directed by the SBIIMS engineer. Supply, laying and dressing of 1.1KV XLPE PVC Insulated 16 sqmm 3 core copper flexible cable. The scope of work includes laying of cable in a suitable metal hose flexible pipe. The complete the work as directed by the SBIIMS engineer. Supply, installation and fixing of 100/63 Amps 4 pole 36KV MCCB in a suitable metal enclosure and necessary arrangement. The complete the work as directed by the SBIIMS. (Output of the MCCB will be connected to UPS input). rmt 40 rmt 45 No 45 No 3 Signature of The Contractor Page 11 of 14

12 5 6 7 Supply, installation and fixing of 100Amps 2 pole MCB in a suitable metal enclosure and necessary arrangement. The complete the work as directed by the SBIIMS.(Output of UPS will be connected to the MCB). Supply, laying, Testing and commissioning of 25 sq mm 3 core copper armoured LT XLPE Insulated, cores laid up, PVC tape inner sheathed for Multi core Cables, Armour (Galvanised wire for cables with galvanised steel strip, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) The scope of work includes clamping & dressing of cable and supply & terminations (6) with double compression glands, canopy, lugs etc. The complete the work as directed by the SBIIMS. (the cable has to be lay from ups of ground & first floor to respective DB). Supply, installation and fixing of 100Amps 4 pole 36KV MCCB with suitable extatence handle it has to be installed inside the distribution panel. The scope of work extending to power wiring from bas bar to MCCB & MCCB to Terminals and also supply& fixing of suitable terminals. The complete the above work as directed by the SBIIMS engineer. (Output of this MCCB will be connected to UPS) No 3 rmt 140 no 1 Signature of The Contractor Page 12 of 14

13 Supply, installation, Testing and Commissioning of 3 phase and neutral 415V, 4 wire, free standing floor mounted M.V panel made out of 14SWG MS sheet after seven tank process and painting with epoxy powder coating. The panel shall consist of suitable rating TPN Copper busbar arrangement (at the rating of 1.5A/ sq.mm) supported with DMC/ SMC barriers and colour coded with heat shrinkable sleeves. The panel shall have short circuit withstanding capacity of minimum 36KA and consist of the following switchgear one of 250Amp FP 36KA MCCB as incomer and output of 100Amps 4 pole 36KA MCCB-5Nos. Complete the work as directed by the SBIIMS. Providing independent earthing for sophisticated electronic equipment with 600 mm x 600 mm x 3.5 mm thick copper plate rigidly fixed to 40 mm dia G.I. pipe of 3 mtr length connected with reducer providing GI funnel with wiremesh as per national electric code including C.C. Chamber of size 400 mm x 400 mm x 400 mm covered with RCC slab filling with salt and charcoal giving earth connection from electrode copper strip of 50 mm x 6 mm x 200 mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) for UPS earthing. Supply and run of 25 mm x 6 mm copper strip including cost of all accessories and labour charges etc. complete the work as directed by the SBIIMS. No 1 no 2 rmt 12 Signature of The Contractor Page 13 of 14

14 11 Supply, laying and termination of 25 sqmm single core copper flexible cable in a suitable PVC conduit from neutral earth pit respective floor DBs earthing.complete the work as directed by the SBIIMS. rmt 54 TOTAL QUOTED AMOUNT FOR ELECTRICAL WORKS RELATED TO UPS OF CMP GOC- PART D TOTAL QUOTED AMOUNT FOR ELECTRICAL RELATED TO AC & UPS OF 2ND FLOOR OF IA -- PART-A TOTAL QUOTED AMOUNT FOR ELECTRICAL WORKS RELATED TO WASHROOMS OF 2ND FLOOR IA- PART B TOTAL QUOTED AMOUNT FOR ELECTRICAL WORKS RELATED TO UPS AT GROUND FLOOR OF IA-- PART-C TOTAL QUOTED AMOUNT FOR ELECTRICAL WORKS RELATED TO UPS OF CMP GOC- PART D TOTAL QUOTED AMOUNT DISCOUNTS IF ANY GRAND TOTAL Applicable GST as per government norms will be paid by the Bank on actual amount. Note: 1) successful bidder has to submit the General Arrangement drawings & wiring diagram to the SBIIMS for approval, before proceeding to the fabrication. 2) Submit the list components to be used in panel and detailed bill of material for approval. 3) Submit the 3 sets of Hard copies of the control & power line diagrams along with soft copies in the form of PDF &Autocad drawings Signature of The Contractor Page 14 of 14