Thermory Portfolio: Profiles 2018

Transcription

1 Excellence in Wood Thermory Portfolio: Profiles 18 THERMORY DECKING 2 : PACS 2 : TENI 3 : B1-1 AND T-4 4 : B2-B AND 4 : PLASTIC 5 : VISIBLE SCREWS 5 THERMORY QUICKDECK 6 THERMORY BY BOLE 6 DRIFT BY THERMORY: DECKING 7 THERMORY CLADDING 8 : PACS 8 : SCREWS OR NAILS 9 : B THERMORY SHINGLES 10 DRIFT BY THERMORY: CLADDING 11 THERMORY FLOORING 12 THERMORY SAUNA 13

2 Thermory Decking DECKING : PaCS 5J PaCS Strip Thermory PaCS ensures a flawless and durable deck with minimal installation time. PaCS creates a beautiful decking surface with no visible in the simplest way imaginable boards are fastened to the clips with a simple click! Available for both, and Thermory : 5J 5J Thermory Thermory PaCS Strip PaCS Strips fit together end to end. PaCS Strip is a fastening solution for the PaCS decking. PaCS Strip is a six-clip strip that fixes three boards sideways onto one joist. The strip ends fit together and are secured to the joist. Deck boards then easily snap onto the clips. The gap between the boards is 5 mm. Stainless steel 4.0 x 30 mm and drill bit included with PaCS Strip. JuAn single clip JuAn single clip can be used with all PaCS profiles and fixed according to specific requirements; The tested tearing strength of JuAn single clip is 160 kg. The countersink screw needed for JuAn single clip is 4.0 x 25 mm. pcs/rm pcs/sqm pcs per pack JuAn single clip 5 x 1000 PaCS Strip (including ) x For PaCS installation procedures and requirements please follow Thermory Decking Installation Guide. 2

3 : TENI D TENI clip D TENI clip D TENI clip Spruce D TENI clip TENI clip D31 D34 D34 Thermory D34 Thermory Spruce D32 1 attached to TENI clip Thermory For a consistent and clean look all Thermory decking boards are available with JEM (Joint End Matched). TENI Clip TENI clip creates a screwless decking surface with a 6 mm gap between the boards. The 8 mm clip height guarantees good ventilation of the boards provided that the installation guide is properly followed. The TENI clip itself is constructed from a UV resistant and weatherproof material, optimized for outdoor conditions. The 3.0 x 45 mm A2-type screw is compatible with wooden beams and the 4.0 x 25 mm screw for ALUC-L aluminum underconstruction beams. pcs/rm pcs per pack TENI clip (including ) For TENI installation procedures and requirements please follow Thermory Decking Installation Guide. 3

4 : B1-1 or T-4 sg B1-1, T-4 D B1-1, T-4 sg D22 B1-1 T-4 Thermory stainless steel clips B1-1 and T-4 create a screwless decking surface with a 4 mm gap between the boards. For a consistent and clean look all Thermory decking boards are available with JEM (Joint End Matched). pcs/rm pcs per pack B1-1 clip T-4 clip (including ) : B2-B or sg B2-B, D8 sg2 D B2-B, B2-B, sg2 D8 sg2 B2-B Thermory black-coated stainless steel clips B2-B and create a screwless decking surface with a 6 mm gap between the boards. For a consistent and clean look all Thermory decking boards are available with JEM (Joint End Matched). pcs/rm pcs per pack B2-B clip clip (including ) For installation procedures and requirements please follow Thermory Decking Installation Guide. 4

5 : PLASTIC sg plastic D30 sg plastic sg Thermory D30 sg Thermory plastic THERMORY black coated plastic clip leaves a distance of 6 mm between the boards. pcs/rm pcs per pack Plastic clip (including ) For installation procedures and requirements please follow Thermory Decking Installation Guide. : VISIBLE SCREWS Spruce visible D visible Thermory D30 Thermory For a consistent and clean look all Thermory decking boards are available with JEM (Joint End Matched). When using, leave about 4-6 mm between decking boards and underconstruction beams by using spacers. Always use stainless steel. For installation procedures and requirements please follow Thermory Decking Installation Guide. 5

6 DECKING: QuickDeck PRODUCT S QuickDeck Maxi /900/ 1350/1800 QuickDeck Mosaic QuickDeck Maxi QuickDeck Mosaic DECKING: THERMORY BY BOLE PRODUCT Thermory by Bole TENI Each Thermory by Bolefloor six-piece curved decking module matches perfectly with the next module, creating an endless repeating pattern with a natural look. TENI Clip Both, TENI clip and stainless steel clip, create a screwless decking surface with a 6 mm gap between the boards. For Thermory by Bolefloor installation procedures and requirements please follow Thermory Decking Installation Guide and brochure: Thermory by Bolefloor. 6

7 New! DRIFT BY THERMORY sg visible B2-B, visible sg 140 plastic Our newest product line in the Rebel Series, Drift by Thermory, represents thermally modified wood products with a unique aged look resembling weathered driftwood. Two beautiful tones are available for Drift decking: Moonlight Rum () Ocean Mist (Thermory ) B2-B plastic Both, black-coated stainless steel clips B2-B and, create a screwless decking surface with a 6 mm gap between the boards. Suitable for profile: sg2. THERMORY black coated plastic clip leaves a distance of 6mm between the boards and is suitable for Thermory decking profile: sg. pcs/rm pcs per pack B2-B clip clip (including ) Plastic clip (including ) For installation procedures and requirements please follow Thermory Decking Installation Guide. 7

8 Thermory Cladding CLADDING : PaCS COVERING New! C7J C4J C23J Clear Clear , 64 63, 80 56, 71, 57 53, 71, , 71, , 64 65, 71, PaCS : CLAD52 CLAD65 CLAD65-0 CLAD72 PaCS : CLAD52 CLAD65 CLAD65-0 PaCS : CLAD150 without PaCS CLAD with PaCS CLAD C7J C7J Thermory Clear C7J Thermory C4J PaCS CLAD is a fastening solution for the PaCS cladding. PaCS CLAD consists of already pre-mounted clips attached into a batten. Gap between the boards is 5 mm. Clad batten length: 2.0 m. Suitable for cladding profiles C7J and C4J, C23J depending on width: CLAD52 is suitable for width 52 mm; 35 JuAn single clips per clad. CLAD65 is suitable for width 65 mm; 28 JuAn single clips per clad. CLAD72 is suitable for width 72 mm; 25 JuAn single clips per clad. C4J Thermory ON REQUEST: JEM, roughening or brushing C23J CLAD150 is suitable for width 150 mm; 28 JuAn single clips per clad. PaCS CLAD pcs/rm pcs/sqm pcs per pack JuAn single clip 1.7 x 1000 CLAD52 x CLAD65 x CLAD72 x CLAD150 x For PaCS installation procedures and requirements please follow Thermory Cladding Installation Guide. 8

9 : SCREWS OR NAILS COVERING C1 C3 Clear Clear C5 C C New! C11 C C1 Thermory C1 Thermory Clear C3 Thermory C3 Thermory Clear Thermory Use stainless steel. C5 Thermory C7 C7 Thermory For installation procedures and requirements please follow Thermory Cladding Installation Guide. C8 Thermory C11 Thermory ON REQUEST: JEM, roughening or brushing 9

10 : B1-1 COVERING B1-1 C B1-1 Clear B1-1 C B1-1 C6 ON REQUEST: JEM, roughening or brushing C6 Thermory Clear C9 B1-1 Thermory stainless steel clip B1-1 leaves a distance of 4 mm between the boards. Estimated usage of clips: 1.7 pcs per running meter (considering battens are every 600 mm). Clip B1-1 available also with black coating. For installation procedures and requirements please follow Thermory Cladding Installation Guide. CLADDING: SHINGLES New! PRODUCT S Shingles S1 4/ Staples or New! PaCS Shingle S2-E CLAD Shingle element measures PaCS Shingle S2-E Shingles are available as individual shingles (profile: S1) and as shingle panels (profile: S2-E), constructed using the PaCS solution. PaCS CLAD Shingle consists of already pre-mounted clips attached into a batten. This allows shingle panels to be easily clicked into place. The solution ensures sufficient air circulation and makes the product last longer. Air circulation is necessary to enhance durability, reduce moisture PaCS and save energy. The installation of wooden shingles has never been as CLAD Shingle easy as with Thermory PaCS. For Shingles installation procedures and requirements please follow Thermory Cladding Installation Guide and brochure: Thermory Shingles. 10

11 New! C15 (JEM) C (JEM) Spruce DRIFT BY THERMORY COVERING only for Natural Our newest product line in the Rebel Series, Drift by Thermory, represents thermally modified products with a unique aged look resembling weathered driftwood. A pallet of beautiful tones is available to suit every taste: EXTERIOR CLADDING: Platinum (C15) INTERIOR CLADDING: Black Pearl (C15) Natural, unoiled (exterior & interior, C15) Moonlight Rum (C) Silver Storm (C15) Smoked Brandy (C15) Sandy Pearl (C15) Gunpowder (C15) JEM - Joint End Matched 11

12 Thermory Flooring THERMORY FLOORING F /909/ 1212/1818, GRADE Select Birch Rustic F , Select F , Select F Select Industrial Moulding ,, Select Select F1 () F1 () F1 Thermory Birch () F6 () F2 () F2 () F3 () F3 () Industrial () Industrial () 12

13 Thermory Sauna THERMORY SAUNA LEVEL STS STP STS3 STS STS3 Alder Aspen Alder Aspen Alder Aspen natural; natural; ; natural; STS3 Radiata STS STS3 STS STS3 STS STS3 natural = no thermal modification; = 190⁰; = 215⁰ Magnolia Magnolia Magnolia STP STS STS3 Thermory Aspen STP (natural) Thermory Aspen STP () Thermory Alder STP (natural) Thermory Alder STS () Thermory Magnolia STS () Thermory Radiata STS3 () NEW! Drift by Thermory (page 11) Thermory Alder () Thermory Magnolia () Thermory Aspen (natural) 13