OEM-approved Products for Windscreen Replacement and Crash Body Repair. Let our experience work for you.

Transcription

1 OEM-approved Products for Windscreen Replacement and Crash Body Repair Let our experience work for you. Trademark of The Dow Chemical Company ( Dow ) or an affiliated company of Dow.

2 Dow Automotive Systems CONTENTS CLEANING AND PRIMING BETACLEAN 3300 Glass Cleaner...3 BETACLEAN 3350 Plastic & Paint Surface Cleaner...3 BETACLEAN 3900 Polyurethane Cleaner...3 BETACLEAN Easy-Go Cleaning Sponge...3 BETABRADE F1 Surface Contamination Remover...3 BETAPRIME 5504G All-in-One No Shake Primer...4 GLASS BONDING AND SEALING BETASEAL 1580 with 30 min Safe Drive Away Time ( SDAT)...4 BETASEAL 1527EP 1hour SDAT...4 BETASEAL hour SDAT...5 BETASEAL hour SDAT...5 BETASEAL 1590CT 2 hour SDAT...5 SEALING BETAFILL 10101, 10210, 10211, Seam Sealants...6 BETAMATE 31 High-strength Adhesive/ Sealant...6 BETAMATE 32 Medium-strength Adhesive/ Sealant...6 CRASH BODY REPAIR BETAMATE 2090 Fast Cure Structural Epoxy Adhesive System...7 BETAMATE 2098 Premium Strength Structural Epoxy Adhesive System...7 BETAFORCE 2850S Structural PU Adhesive System

3 CLEANING AND PRIMING BETACLEAN 3300 Glass Cleaner Use for cleaning glass, ceramic materials, plastic-coated surfaces (PVC, PUR-RIM) and the pretreatment of surfaces prior to the application of adhesive systems. Promotes dirt, road film and grease cleanup Evaporates quickly to save time and ensure a dry, residue-free bonding surface Can be used to inspect glass quality before installation highlights fingerprints and glass imperfections Available in three convenient packages: handy 8 ml wet-dry wipes, 500 ml spray bottle and environmentally friendly 5 L bottle and 25 L container for refilling spray bottles Additional optional cleaning agents are available to support a save and clean bonding process: BETACLEAN 3350 Surface Cleaner Use for cleaning and degreasing glass, plastic and painted surfaces. Available in 1000 ml bottle BETACLEAN 3900 Polyurethane Cleaner BETACLEAN 3900 cleaner removes uncured polyurethane residues from paints and plastics. Available in 1000 ml bottle BETACLEAN Easy-Go Cleaning Sponge Ultra-abrasive melamine sponge used in tandem with BETACLEAN 3300 spray cleaner to scrub bonding area Helps break through and remove common contaminates One-time use only Available in bulk 224 sponges per box. Also part of kits 12 sponges per kit that includes BETACLEAN 3300, BETAPRIME 5504G primer sticks and adhesive. BETABRADE F1 Surface Contamination Remover Removes heavy contamination on glass Simple, easy, time-saving application Visible so you can make sure you ve applied it thoroughly Safe for the installer no spraying or atomization Will not damage or blemish the glass 3

4 Dow Automotive Systems BETAPRIME 5504G All-in-One No Shake Primer No Shake means one less worry, whether your installation is mobile or in the shop Optimizes installation process elimination of shaking step makes process easier, safer, faster Fast flash-off (dry) time helps eliminates excessive waiting time following application One primer for all common aftermarket substrates: glass, nicks and scratches, paint, encapsulations (PUR, PVC, PAAS and metal) and cut bead Reduces cost and optimizes inventory by eliminating redundant products Effective in treating larger bare metal areas allows for corrosion treatment in the field Works in a wide range of weather and temperatures from -5 C to 40 C Ideal for mobile installations GLASS BONDING AND SEALING BETASEAL minute minimum drive away, no aperture prime Excellent link-up strength allows for 30-minute minimum drive-away time in temperatures from -10 C to 40 C Can be applied directly to freshly trimmed, cut-back PU bead with no need for primer or activator for increased productivity High-modulus formula helps maintain structural integrity at original equipment levels Simple, three-step glass replacement solution clean, prime, bond Nonconductive formula reduces interference with radio, mobile phone, GPS or additional driver aid technologies No heating required for improved work efficiency BETASEAL 1527EP Fast and simple 60-minute minimum drive away in temperatures from -10 C to 40 C High-modulus formula helps maintain structural integrity at original equipment levels Nonconductive urethane reduces interference with mobile devices No heating required for improved work efficiency Improved formula is easy to use with excellent decking and short cut-off string 4

5 BETASEAL 1507 Two-hour minimum drive away Easy three-step installation process Two-hour minimum drive away in temperatures from -5 C to 40 C, one hour for vehicles without passenger side airbag High-modulus formula helps maintain structural integrity at original equipment levels Simple, three-step glass replacement solution clean, prime, bond Generous working time up to 15 minutes Low-conductive formula reduces interference with radio, mobile phone, GPS or additional driver aid technologies High viscosity No heating required BETASEAL 1407 Easy-to-use high-strength adhesive Simple, three-step glass replacement solution clean, prime, bond Easy to gun in all conditions, no heating required for shorter installation time Generous working time up to 15 minutes Four-hour minimum drive away in temperatures from -5 C to 40 C, two hours without passenger airbag High-modulus formula helps maintain structural integrity at original equipment levels Low-conductive formula reduces interference with radio, mobile phone, GPSor additional driver aid technologies High green strength to prevent slipping, even on heavy screens BETASEAL 1590CT The transportation adhesive Provides shortest safe drive away and longest open time Bonding and gap filling with one system high UV resistance and long open time Excellent link-up strength provides two hours safe drive-away time for all glass weights Primerless can be applied directly to freshly trimmed, cut-back PU bead High-modulus formula helps maintain structural integrity at OEM levels Provides excellent no-sag properties Non-conductive formula reduces interference with radio, mobile phone, GPS or additional driver aid technologies Cold applied no heating required for improved work efficiency 5

6 Dow Automotive Systems SEALING BETAFILL 10101, 10210, 10211, Seam Sealants Fill and seal in one operation Provides high quality seam, panel sealing and gap filling in multiple applications. Over-paintable with most systems, these one-component, moisture-curing sealants provide permanent elasticity and good adhesion to a variety of different substrates. BETAFILL is sprayable and UV stable, it can be used on passenger cars, light commercial/leisure vehicles and in heavy truck applications for: Passenger cars, light commercial/leisure vehicles Seam sealing of roof installation Gap filling and bonding of bonnet struts Joining of moldings, spoilers and trim Gap filling between panels Cosmetic finishing of external and internal joints available in different colors Sealing of lightweight construction materials such as GRP Sealing and fixing large internal panel areas Primerless sealing of variety materials such as wood, metal, plastic door frames and window fittings BETAMATE 31 High-strength Adhesive/ Sealant BETAMATE 32 Medium-strength Adhesive/ Sealant A strong primerless bond with permanent elasticity BETAMATE 31 & 32 adhesive and sealant are one-component, moisture-cure, high and medium-strength, POP-based and silane terminated adhesive/sealant with permanent elasticity that extends the Dow Automotive Systems sealants product portfolio. BETAMATE 31 & 32 adhesive and sealant have excellent adhesion to a wide range of substrates when used primerless. High- and Medium strength adhesive/ sealant Easy to extrude with short tail Excellent UV stability Solvent- and isocyanate-free Low shrinkage Over -paintable wet-on-wet 6

7 CRASH BODY REPAIR BETAMATE 2090 Fast Cure Structural Epoxy Adhesive System OEM approved and certified meets stringent manufacturer requirements. Two-part, epoxy-based adhesive use on most metals, alloys and composites Rapid curing profile at room temperature weld through ability within one hour Easy-to-use with virtually all 1K dispensers for faster and easier body repairs Long working time with little preparation needed more efficient repairs Heat-induction cure possibilities to accelerate curing process High performance, especially at sub-zero temperatures BETAMATE 2098 Premium Strength Structural Epoxy Adhesive System Provides premium OEM level strength and crash durability of OEM-quality repairs. One structural adhesive for all needs adheres to most metals, alloys and substrates. Can help restore vehicles to same crash durability and body strength as OEM structural adhesives Crash proven and meets OEM specifications Weld through within one hour for faster repairs Easy to use with all dispenser types for faster and easier body repairs Long working time with little preparation needed BETAFORCE 2850S Structural PU Adhesive System OEM approved- Ideal adhesive technology to assemble and repair lightweight materials such as CFRP, ALU and SMC without compromising structural performance. 2K PU-based product portfolio tailor-made for hybrid and dissimilar material bonding Facilitates lightweight construction with focus on noise dampening, fuel efficiency and sustainability Long-term durability of bond assembly, robust material properties over wide temperature range Perfect match of high modulus, high tensile strength, as well as high elongation at break Corrosion protection for dissimilar metal bonding Room temperature curing, as well as accelerated curing options to accelerate process from trim shop bonding applications towards paint and body shop applications Ideal for hybrid materials assembly (SMS, CFRP, coated high strength steel and Aluminum) Enables assembly of structural roofs, tail gates, trunk lids and door modules, 7

8 DOW AUTOMOTIVE SYSTEMS WORLD CLASS PRODUCTS AND SUPPORT More than one billion vehicles worldwide are assembled using Dow Automotive Systems windscreen adhesives. These trusted products are also available to the automotive aftermarket. Safety Safety is always the bottom line at Dow Automotive Systems. All our aftermarket products are crash proven to rigorous OEM standards and also stand up to robust durability testing. Innovation Dow leads the field in technology and innovation. The R&D team is dedicated to finding ways to improve polyurethane technology for all automotive aftermarket glass replacements. For example, our advanced cure adhesives boost drive-away times as low as 30 minutes and they re all cold applied no heating needed. Dow s innovative BETAPRIME 5504G All-in-One No-Shake Primer It also optimizes the installation process by eliminating the shaking step. BETAPRIME 5504G has a fast flash-off (dry) time to further reduce excessive waiting time following application. eliminates the need for multiple primers to reduce cost and inventory. Support When you choose aftermarket products from Dow Automotive Systems, you not only get the best products available, you get an industry-leading partner. Dow offers top-class training for technicians and promptly responds to your needs and concerns to give you world-class support. Quality You can trust the quality of all Dow products. We pride ourselves on products that are free of defects and retain batch-to-batch consistency. All cleaners, primers and adhesives are optimized for value they ensure peace of mind for customers, while keeping your material costs low and making your workdays go easier and faster. In Europe: (toll free)* In Finland: In Italy: In Latin America: Phone: , Fax: In Asia Pacific: Phone: , Fax: All Pacific countries except Indonesia & Vietnam: Toll-free Phone: , Toll-free Fax: *Toll free from Austria, Belgium, Denmark, France, Germany, Hungary, Ireland, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and The United Kingdom. Trademark of The Dow Chemical Company ( Dow ) or an affiliated company of Dow Form Number /16-OIA