ISTA 6 - Amazon.com Over Box Test Report_External VERSION DATE: 4/24/17

Transcription

1 ISTA 6 - Amazon.com Over Box Test Report_External VERSION DATE: 4/24/17 ITEM INFORMATION Vendor/Seller Name: AmazonBasics ASIN: B01MQJK2U3 Item: AmazonBasics 60 Watt Equivalent, Soft White, Dimmable, A19 LED Light Bulb 2-Pack Certification Passed: Pass / Prep Free Packaging (PFP) *All items must pass for certification LAB INFORMATION Testing Lab: Amazon Packaging Lab Location: Seattle, Washington Date of Test: 3/13/2018 Fail / Enforced Over Box (EOB) ISTA Member/ Lab Tech: Alex Dinsmore TEST RESULTS Shipment Less Than 15lbs (6.80kg) 15lbs (6.80kg) Or Greater Configuration Non Fragile Fragile Non Fragile Fragile Single 1 1 Passed / 2 Tested Multi 1 3 Passed / 3 Tested Total Samples 2 4 Passed / 5 Tested Post Test Comments: Single s Box Size: 10 x 7 x 3 Multi s Box Size: 13 x 9 x 4 Overview Dummy Weights: A,B,D ASIN- B01MQJK2U3 passed ISTA6-AMAZON.COM-Over Boxing and is approved as PFP. It passed as PFP because it did not meet the size requirements of FFP. Both of the lightbulbs were in new condition with no scuffing or denting from test. The Product lightbulbs also turned on when plugged in. Condition Packaging Condition The packaging was in good condition it had minor scuffing and dents. The inserts in the container were in new condition with very little damage if any at all. 1

2 LAB TEST REQUEST {filled out by requestor} Test Requestor AmazonBasics Project Name AmazonBasics Light Bulbs Submission Date 3/13/2018 Due Date 3/15/2018 ASIN Manufacturer Description B01MQJK2U3 AmazonBasics AmazonBasics 60 Watt Equivalent, Soft White, Dimmable, A19 LED Light Bulb 2-Pack Package Dimension Package Weight Classification 1 Classification 2 Test Type Fragile/Non-Fragile Value Add Packaging (VAP) Value Add Packaging (VAP) Info Total Test Samples Additional Notes Catalog Dims 35 x 23 x.3 inches / Actual dims measured by lab 5.25 x 5 x 3 inches / Girth inches Catalog Weight 6.4 ounces / Actual weight by lab.348 lbs. PFP Parcel ISTA 6 Amazon.com Over Box Non-Fragile Yes /No Material specifications: Corrugated E-Flute / Film LD-PE 04 2 units N/A PRE-TEST INSPECTION {filled out by lab} Product Condition Package was not opened before testing to review product. Package Condition Package Condition before testing Corrugated Info (Box Cert if available) Dunnage Info Package was in new condition before testing ORIGINAL as arrived in the lab for testing NEW re-packaged with new materials before testing ECT / Mullen N/A Additional Notes N/A 2

3 PRE-TEST PICTURES The least pristine ASIN pack should have 2 isometric pictures taken of the ASIN package as prescribed below. Special call outs and or damage should have description of location and detailed information in the text box below the picture. If a box cert is present, a picture of it should be taken and recorded. -Please note only one set of pre-test pictures are needed for the single and multi pack out orientation.- ISO #1 Side 1/2/5 ISO #2 Sides 3/4/6 Box Cert (If Applicable) Pre Test Before Dunnage in Box Single Pre Test After Dunnage in Box Single Pre Test Before Dunnage in Box Multi Pre Test After Dunnage in Box Multi 3

4 TEST DETAIL Items in black were completed and values updated. Items left in gray were not completed. Test Value P/F P/F P/F P/F P/F OBSERVATIONS BLOCK 1:Temp and Humidity Ambient Lab Temp 12+ hours BLOCK 2: Drop INCHES P P NA NA NA BLOCK 2: Drop 8 36 INCHES P P NA NA NA BLOCK 2: Drop 9 18 INCHES P P NA NA NA BLOCK 3: Vib with Top Load Face 3 30 Lbs. P P NA NA NA 45 Lbs. for Multi Box BLOCK 3: Vib with Top Load Face 4 0 Lbs. P P NA NA NA BLOCK 3: Vib with Top Load Face 6 Lbs. P P NA NA NA BLOCK 4: Drop INCHES P P NA NA NA BLOCK 4: Drop INCHES P P NA NA NA Most Critical Face: Side 6 BLOCK 4: Drop INCHES P P NA NA NA Hazard Drop BLOCK 5: Leak Test Pass/Fail NA NA NA NA NA Not applicable for this package TEST PICTURES Pictures should be taken of each block test set up along with a post picture taken of the item at the end of each test block. Additional pictures of damage should have locations noted, size of damages measured, and written in text box below them. Block 2 Test Set Up Block 2 Post Test Item Picture Extra # 4

5 Block 3 Face 3 Test Set up Block 3 Face 3 Post Test Item Picture Block 3 Face 3 Test Vibration Profile TEST PICTURES {continued} Block 3 Face 4 Test Set up Block 3 Face 4 Post Test Item Picture Block 3 Face 4 Test Vibration Profile Block 3 Face 6 Test Set up Block 3 Face 6 Post Test Item Picture Block 3 Face 6 Test Vibration Profile Block 4 Test Set Up Block 4 Post Test Item Picture Extra # 5

6 TEST PICTURES {continued} Block 5 Test Set Up Block 5 Post Test Item Picture Extra # POST TEST PICTURES Pictures in the section should be taken in the following order; box is open with dunnage still in place, dunnage removed, and finally isometric view pictures of the ASINs should be taken as called out as in the two picture spots state below. An exploded bill of material (BOM) view of the item when applicable as the last mandatory picture. Additional pictures of damage should have locations noted, size of damages measured, and written in text box below them. PLEASE COMPLETE SECTION FOR EACH ASIN TESTED- ISO #1 Side 1/2/5 ISO #2 Sides 3/4/6 Post Test with dunnage in box 6

7 POST TEST PICTURES {continued} Post Test dunnage removed from box Post Test with dunnage in box Post Test dunnage removed from box Exploded BOM View Posttest without the instructions Out of the box with the corrugated protection Lightbulb turned on and works Lightbulb turned on and works Extra # END OF REPORT 7