LOXITE: The aluminum extrusion is polished to a high luster and clear anodized. Lengths to 24. (Equals AA-M10-M22-A21, 31, or 41)

Transcription

1 Alphabetical Index Angle, Flat Bar, Rod Awning Rail Carpet Bar Castings Channel and Cap (Vinyl) Cove Drip Edge Extruded Tube Horse & Enclosed Trailer Shapes Insert Roof Edge Miscellaneous Aluminum Shapes Miscellaneous Vinyl Shapes Mounting Rail Nosing Paneling & Wallboard Trim (Vinyl) Plain-Face Roof Edge ReverseCove(Vinyl) Seam Binders Side Moulding Stair Nosing T-Nosing (Vinyl) Tub Moulding Wallboard Trim (Aluminum) Z-Bar (Aluminum) Z-Bar (Vinyl)

2 Numerical Index AA AA AA VR AA AA AA VR AA ,20 AA AA VR AA AA AA VR AA AA AA VR AA AA AA VR AA ,21 AA AA VR AA AA AA VR AA AA AA VR AA AA AA VR AA AA AA VR AA ,21 AA ,20 AA VR AA AA AA VR AA ,20 AA AA VR AA ,20 AA AA VR AA AA AA VR AA AA AA VR AA ,20 AA AA VR AA AA ,9 AA VR AA AA AA VS AA AA AA AA AA AA AA AA AA AA ,21 AA AA AA AA AA AA ,20 AA AA AA ,20 AA AA AA ,29 AA ,30 AA AA AA AA AA ,22 AA ,30 AA AA AA AA ,24 AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA , 24 AA AA AA AA AA AA AA ,21 AA AA AA ,20 AA AA AA ,20 AA AA AA ,21 AA FA AA AA FA AA AA FA AA AA FA AA AA FA , 21 AA AA FA AA AA OP050419XX 15 AA AA OP AA AA OP AA ,21 AA OP AA ,20 AA ,30 OP AA AA RF AA AA VE AA AA VE AA AA VF AA ,21 AA VF AA AA VF AA AA VR AA AA VR

3 Loxcreen Finishes LOXCREEN FINISHES (listing includes most common finishes other finishes available) MILL: The aluminum extrusion is as extruded. LOXITE: The aluminum extrusion is polished to a high luster and clear anodized. Lengths to 24. (Equals AA-M10-M22-A21, 31, or 41) LOXITE GOLD: The aluminum extrusion is polished to a high luster, anodized and dyed gold. Lengths to 24. (Equals AA-M10- M22-A23, 33, 43 or A21, 31, 41. POLISH: Die lines are removed by a mechanical buffing process using a special polishing compound that imparts a high luster to the surface. The aluminum extrusion is not anodized and is subject to further oxidation. Lengths to 24. (Equals AA-M10-M22) SUPER SATIN: The aluminum extrusion is chemically etched (R1) and clear anodized. This finish is also available in a gold finish as Satin Gold. Lengths to 28 hollows, 31 solids. (Equals AA-M10-C22-A21, 31, or 41) BUFF SATIN: The aluminum extrusion is mechanically buffed, chemically etched (R1) and clear anodized. This finish is also available in a buff gold finish as Buff Satin Gold. Lengths to 28 hollows, 31 solids. (Equals AA-M10-M22-C22-A21, 31, or 41) MILL BRITE: The aluminum extrusion is chemically brightened (R5) and clear anodized. This finish is also available in gold and bronze finishes as Mill Brite Gold and Antique Mill Brite Gold. Lengths to 28 hollows, 30 solids. (Equals AA-M10-C31-A21, 31, or 41) BUFF BRITE: The aluminum extrusion is mechanically buffed, chemically brightened and clear anodized. This finish is also available in gold and bronze finishes as Buff Brite Gold and Antique Buff Brite Gold. Lengths to 28 hollows, 30 solids. (Equals AA-M10-M22-C31-A21, 31, or 41) ELECTROLYTIC COLORING (2-STEP): In the first step, the aluminum extrusion is clear anodized using conventional sulfuric anodizing. In the second step, the color is electrolytically deposited into the anodic pore. Colors range from champagne to black. 2-Step finish is much more resistant to fading than conventional color anodizing, however, some variation is color is unavoidable because of process variables. Lengths to 30. (Equals AA-M10-C22-A24, 34, or 44) PAINT: The aluminum extrusion is cleaned and treated with a conversion coating. The paint is then electrostatically applied and cured in a high temp oven. Lengths to 24 (Standard colors meet AAMA specifications.) IMPORTANT - Some gold and bronze anodized finishes are not colorfast. Consider end use (inside or outside application) when selecting a finish. Review end use application with a Loxcreen sales representative. TEMPER T-1: Cooled from an elevated temperature and naturally aged to a substantially stable condition. Applies to products for which the rate of cooling from an elevated temperature, such as casting or extrusion, is such that their strength is increased by room temperature aging. T-4: Solution heat-treated and naturally aged to a substantially stable condition. Applies to products that are not cold worked after solution heat-treatment, or in which the effect of cold work in flattening or straightening may not be recognized in mechanical property limits. T-5: Cooled from an elevated temperature and then artificially aged. Applies to products that are cooled from an elevated temperature, such as casting or extrusion, and then artificially aged to improve mechanical properties or dimensional stability or both. T-6: Solution heat-treated and then artificially aged. Applies to products that are not cold worked after solution heat- treatment, or in which the effect of cold work in flattening or straightening may not be recognized in mechanical property limits. T-52: Stress-relieved by compressing. Applies to products that are stress-relieved by compressing after solution heat-treatment, to produce a permanent set of 1 to 5 percent. 3

4 Insert Roof Edge AA002951** _.. AA005690** _.. Plain - Face Roof Edge AA002835** _.. AA001987** _ This profile can be used as a roof edge in some applications, however, the typical application is as a stair nose. AA007008** _.. Loxcreen s AA is classified as the finest bending roof edge in the country. Over eight years of special design and engineering is represented in the profile. Loxcreen produces quality products for fast and easy application. Our vinyl inserts VF or VF will fit shapes shown above. 4

5 Awning Rail DIA. AA007251** _.. AA001579** _ DIA DIA AA000898** _.. AA001561** _ DIA AA010363** _.. Standard Drilling - ND AA001986** _ AA000398** _.. 5

6 Decorative Side Moulding AA006981** _.. Standard Drilling - PX (Retainer) AA001816** _.. Use insert VF AA007007** _ AA005165** _.. AA001904** _.. AA003590** _ AA002605** _.. Drip Edge AA003421** _ AA000688** _.. Standard Drilling - ND AA016971** _.. Standard Drilling - ND 6

7 Drip Edge AA010685** _.. Standard Drilling - ND.475 AA001989** _.. AA000788** _.. Standard Drilling - ND DIA. AA001993** _.. AA009155** _.. AA009154** _ AA019735** _.. Standard Drilling - ND AA019981** _.. Standard Drilling - ND 7

8 Mounting Rail AA000054** _.. Carpet Bar, Seam Binder & Stair Nosing AA000213** _.. AA008469** _.. Standard Drilling - DE FA014292** _.. Standard Drilling - D AA006439** _.. Standard Drilling - ND AA013757** _.. Standard Drilling - DC 8

9 Carpet Bar, Seam Binder & Stair Nosing AA000908** _.. AA007021** _.. AA000017** _ FA014256** _.. Standard Drilling - D1 FA014260** _.. FA014269** _ AA007008** _.. AA000068** _.. AA004490** _.. Standard Drilling - DX 9

10 Nosing AA000019** _.. AA000621** _.. AA000020** _.. AA000024** _ AA000031** _.. AA000021** _.. AA001923** _ AA000122** _.. AA001924** _.. AA000132** _.. AA002625** _.. Standard Drilling - ND 10

11 Extruded Tube DIA..840 DIA..875 DIA. DIA. AA002058** _ ND AA002198** _ ND AA004182** _ ND AA002079** _ ND AA005273** _ ND AA004274** _ ND AA009215** _ ND AA003947** _ ND AA003823** _ ND AA004210** _ ND 11

12 Extruded Tube AA000860** _ ND AA008222** _ ND TYP AA008168** _ ND AA012724** _ ND 12

13 Angle, Flat Bar, Rod The angles listed on this page are only a few of the numerous angles available to you from Loxcreen. Your Loxcreen representative will be happy to supply you with additional information on any aluminum or vinyl trim product not shown in this catalog. Our engineering department, with many years experience, has the technical skill to assist you in solving many production problems through new applications in aluminum and vinyl. EXTRUDED ALUMINUM EQUAL & UNEQUAL LEG ANGLES C B C A ANGLES EQUAL LEGS Die Number A-Inch B-Inch C-Inch AA000069** _ AA020070** _ AA000089** _ AA020069** _ AA000199** _ AA000421** _.. AA000494** _ AA001260** _ A C B C ANGLES UNEQUAL LEGS Die Number A-Inch B-Inch C-Inch AA000682** _ AA001595** _ AA001529** _.. AA004631** _ AA008149** _ A B FLAT BAR Die Number A-Inch B-Inch AA000614** _ AA008169** _ A ROUND ROD Die Number A-Inch AA008156** _ AA _

14 Cove AA000149** _.. AA000662** _.. Standard Drilling - ND AA007006** _.. AA000049** _.. Standard Drilling -ND Tub Moulding Aluminum.422 Vinyl AA007004** _.. Standard Drilling - PA VS001358**

15 Castings Chrome castings for AA moulding Vinyl castings for VS001358**9910 OP050420**VE (end) Part number for AA castings OP050419xx OP050420**VC (corner) (Available in Colonial White or Almond) Chrome Castings for AA Cove Part number for AA007006: OP OP OP xx = 01 = left = 02 = right = 03 = center 15

16 Wall Board Trim - Aluminum AA000071** _.. 5/32 Material Standard Drilling - SN AA000070** _.. 5/32 Material Standard Drilling - GN AA000870** _.. 9/32-1/4 Material Standard Drilling - GN AA000871** _.. 9/32-1/4 Material Standard Drilling - SN FA014287** _.. Paneling & Wall Board Trim - Vinyl Material Thickness (8 lengths) Material Thickness (8 lengths) VR005008** _ 5/32 material (25/box) VR005007** _ 5/32 material (25/box) Material Thickness (8 lengths) VR005091** _ 3/32 material (100/box) VR005006** _ 5/32 material (25/box) VR000010** _ 3/16 material (100/box) VR001362** _ 1/4 material (100/box) 16

17 Paneling & Wall Board Trim - Vinyl Material Thickness (8 lengths) Material Thickness (12 lengths) VR005005** _ 5/32 material (25/box) VR001361** _ 1/4 material (100/box) VR000014** _ 1/4 material (200/box) Tee Nosing & Reverse Cove - Vinyl VR000298** _ (Rigid) 12 lengths (200/box) VE000239** _ (Flexible Polyethylene) 13/16 Tee (2000 RL) VF000048** _ (Flexible) 3/4 Reverse Cove (1500 /2-750 Rolls) VE000223** _ (Flexible Polyethylene) 7/16 Reverse Cove (2000 Rolls) Channel and Cap - Vinyl VR000197** (75/box - 8 ) VR002393** Channel for.375 material (200/box - 8 ) 17

18 Channel and Cap - Vinyl VR001386** Cap for.375 material (100/box - 8 ) VR002392** Channel for.500 material (100/box - 8 ) Miscellaneous Vinyl Shapes VF000017** Flexible Insert (1500 /2-750 Rolls ) VF001030BK** Flexible Insert (Black only 2000 / Rolls ) VR002034** Rigid Shoe (150/box - 10 ) A B VR002336** Ceiling Tile Divider (150/box - 14 ).787 VR002391** Cap for.3125 material (100/box - 12 ) VR000143** (3/4 x 3/4; 100/box) VR000394** (1 x 1; 100/box) (12 lengths) VR002033** Outside Corner (75/box - 12 ) 18

19 Aluminum & Vinyl Z-Bar AA002880** _ ND Z bar for 3/8 material AA005743** _ ND Z bar for 5/8 material VR001224** _ (75/box - 10 ) Z bar for 5/8 material Miscellaneous Aluminum Shapes AA005421** _ ND Channel AA012723** _ ND Miscellaneous Channel AA010356** _ ND h section AA008162** _ ND Structural Channel 19

20 Horse & Enclosed Trailer Shapes Headbands & Window Trim AA000020** _.. AA001923** _.. AA000122** _ AA000132** _.. AA001924** _.. AA002625** _.. Standard Drilling - ND Gravel Plate Trim Drip Edge AA000213** _.. AA006439** _.. AA000788** _.. Standard Drilling - ND AA000688** _.. Standard Drilling - ND 20

21 V-Chrome Horse & Enclosed Trailer Shapes Drip Rail AA000662** _.. Standard Drilling - ND AA000049** _.. Standard Drilling - ND AA017401** _ND Side Moulding Awning Rail AA001904** _.. AA003590** _.. AA002605** _.. AA001986** _.. Gravel Guard RF1315**AE250 (size: 3, 5, 9, 12, 14, 18 wide) Cap /16 Material FA014287** _PS 1/16 Material AA007859** _ND 5/32 Material AA000071** _ND 3/16 Material AA017069** _ND 21

22 Horse & Enclosed Trailer Shapes Cap /4 Material FA014282** _PS 9/32 Material AA000871** _ND 3/8 Material AA002465** _ND 1/2 Material AA001998** _ND Side Rail AA005383** _.. 1/2 Side Rail AA012491** _.. 1/2 Side Rail 22

23 Side Rail Horse & Enclosed Trailer Shapes AA012490** _.. 3/4 Side Rail AA012492** _.. 1 Side Rail Miscellaneous Rail AA018110** _.. Rub Rail with Lip AA019650** _.. Top & Bottom Rail 23

24 Horse & Enclosed Trailer Shapes Miscellaneous Rail AA019492** _.. Econo Trailer Top Rail AA019735** _.. Drip Rail.290 AA019344** _.. J Rail AA019905** _.. Top Rail.835 AA019110** _.. Top Rail for Lights.835 AA019981** _.. Drip Edge with Insert (Use insert VF001030) AA AA AA020565** _.. Guard Trim with Leg AA020563** _.. Top Rail AA020564** _.. Screw Cover 24

25 Horse & Enclosed Trailer Shapes Z Bar AA016689** _ ND Z AA006756** _ ND Wall Stud AA019384** _ ND Z Bar- Trailer Side Doors AA017396** _ ND 25

26 Horse & Enclosed Trailer Shapes Trim AA017399** _ ND Top/Side Trim AA017398** _ ND Bottom Trim AA018570** _ ND Small Bottom Trim AA018522** _ ND Drop Gate Trim with Lip AA018352** _ ND Small Roof/Top Trim AA015737** _ ND Companion to AA or use as Top Trim AA018059** _ ND Trim

27 Horse & Enclosed Trailer Shapes Trim AA017426** _ND Bottom Trailer Trim AA017400** _ ND DOT Safety Tape Trim AA016254** _ ND 1/2 Corner Trim Hinge Systems AA013260** _ ND RV Hinge AA013261** _ ND RV Trim 27

28 Horse & Enclosed Trailer Shapes Hinge Systems AA019906** _ ND Concession Trailer Hinge AA019907** _ ND Concession Trailer Door Hinge Door Frames AA012487** _ ND Hatch Door Frame AA012448** _ ND Door Frame 28

29 Horse & Enclosed Trailer Shapes Door Frames AA017394** _ ND Door Frame (Companion to AA017395) AA015168** _ ND Door Frame.850 AA018374** _ ND Door Frame AA019468** _ ND H Door Frame 1 AA017395** _ ND Door Frame (Companion to AA017394) AA017397** _ ND Door Frame Miscellaneous Tube AA019770** _ ND Door Frame AA000860** _ ND 29 AA015079** _ ND

30 Horse & Enclosed Trailer Shapes Miscellaneous Tube AA008222** _ND AA008168** _ND TYP AA015213** _ND AA012724** _ND AA014556** _ND AA005384** _ND 30

31 Miscellaneous Tube Horse & Enclosed Trailer Shapes AA015078** _ ND AA008660** _ ND P Tube AA019472** _ ND 1-1/2 P Tube with Leg AA018919** _ ND 1 1/2 P Tube with Flange 31

32 Horse & Enclosed Trailer Shapes P Tube AA018920** _ ND 3 P Tube with Leg Miscellaneous AA011939** _ ND Inside Corner 32

33 Horse & Enclosed Trailer Shapes Miscellaneous AA012722** _ND Door Standard AA007829** _ND Bottom Rail AA012803** _ND 3 Radius Corner Top Rail 33

34 Horse & Enclosed Trailer Shapes Miscellaneous AA008468** _ND Top Cap AA010998** _ND Top Cap

35 Horse & Enclosed Trailer Shapes Miscellaneous AA006984** _ND Roof Bow AA010234** _ND 3 Radius Corner AA012720** _ND 7 Slat AA012721** _ND 4 Slat 35

36 Terms & Conditions 1. CONTRACT BETWEEN BUYER AND SELLER: A written order and acknowledgment shall constitute the contract between Buyer and Seller, and said Contract may not be amended or rescinded except by written agreement by both parties, referring expressly to this contract. 2. WARRANTY: Seller warrants that merchandise sold to Buyer shall be free from defects in material and workmanship and shall conform to specifications. EXCEPT FOR SUCH WARRANTY, THE SELLER DISCLAIMS ANY AND ALL OTHER WARRANTIES OF ANY KIND WHATSOEVER, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE AND INCLUDING BUT NOT LIMITED TO ANY ORAL OR WRITTEN DESCRIP- TION OF THE PRODUCTS, THEIR CHARACTERISTICS OR PROPERTIES OTHER THAN THAT SPECIFICALLY STATED IN THE FOREGOING LIMITED WARRANTY. SELLER SHALL HAVE NO LIABILITY FOR CONSE- QUENTIAL OR INCIDENTAL DAMAGES AS A RESULT OF THE SALE OF ITS MERCHANDISE. In the event that its merchandise is not as warranted, Buyer s sole remedy will be, at Seller s election, replacement of the merchandise or return of the purchase price. Prior written approval from the Seller must be secured before returning any merchandise for credit. 3. TOLERANCES: Standard Commercial tolerances apply unless otherwise specified. 4. PRICE: Prices are based on existing conditions and are subject to change, at our discretion, at any time prior to order shipment. Unless otherwise specified, all prices are based on quantity shipped per release, with Buyer accepting over-run or under-run on each individual item based on standard shipping tolerances. Exact control of quantity shipped must be specified as a requirement of said contract. 5. CREDIT: All shipments shall be subject to the approval of Seller s Credit Department. If, in the sole judgment of the Seller, the financial responsibility of the Buyer is unsatisfactory, or becomes impaired, or if Buyer fails to make any payment in accordance with the terms of the contract, then Seller may defer or decline to make any shipments except upon receipt of satisfactory security or cash payments in advance, or Seller may terminate the contract. 6. TAXES: All prices are subject to the net additions of all Federal, State, or Municipal taxes or charges which may be established or levied upon or assessed against the merchandise under contract. 7. SHIPMENTS: Unless otherwise specified, title to all merchandise, and the risk of loss, shall pass to the Buyer upon delivery by the Seller to the transportation carrier at the shipping point or the actual transfer of possession to the Buyer, whichever is earlier. 8. DELAYS: Seller cannot be held liable for loss or damage arising from delay in fulfilling or failure to fulfill any accepted order in accordance with its terms where such delay or failure is caused by shortage of materials, delays of carriers, embargoes, fires, floods, strikes, riots, wars, acts of God, or other causes beyond our control. 9. RETURNED MATERIAL AUTHORIZATION: Seller must be notified within 10 days after delivery of Buyer s request to return merchandise. Upon receipt of Seller s authorization, merchandise must be returned within 30 days in accordance with Seller s shipping instructions. Merchandise must be returned in exactly the same condition as in which it was received by Buyer. Handling and restocking fees will be charged to Buyer s account. 10. CANCELLATION: Said contract is subject to cancellation only upon Seller s acceptance of such cancellation in writing and the effective date of cancellation shall be the date of such acceptance. Payment of cancellation charges shall be made by Buyer upon receipt of statement of same. Cancellation charges shall not exceed the purchase price of the canceled portion of the contract. 11. EQUIPMENT: Any equipment (including jigs, process dies and tools, etc.) which Seller constructs or acquires specifically for use on Buyer s order shall be the sole property of Seller, whether or not they are charged to Buyer s account. Die charges are for exclusive use of extrusion tooling and are not subject to refund. Dies which indicate no activity for two years or more will be scrapped without notice and replacement cost will be for Buyer s account. 12. PATENT PROTECTION: Seller agrees to indemnify Buyer against any claims or liabilities for or by reason of alleged patent infringement arising from the manufacture or sale of any merchandise furnished Buyer hereunder, except where the specifications, process, design or method of manufacture originated with Buyer, in which event Buyer agrees to indemnify Seller in like manner. The Loxcreen Company, Inc. 36 9/2004

37 Contact our Service Center near you for more information. Corporate Office 1630 Old Dunbar Road / PO Box 4004 (29171) / West Columbia, South Carolina (803) / FAX (803) Loxcreen MetalSource TEXAS PO Box 5126 / Arlington, Texas / 400 N. Great SW Parkway / Arlington, Texas Metro / All other areas (817) / FAX (817) / GEORGIA 6360 Button Gwinnett Drive / Atlanta, Georgia / (770) / FAX (770) MISSOURI 1503 Harry S. Truman Blvd. / Caruthersville, Missouri / (573) / FAX (573) OHIO 100 Westheimer Drive / Middletown, Ohio / (513) / FAX (513) NORTH CAROLINA PO Box 29 / 2300 Old Durham Road / Roxboro, North Carolina / (336) / FAX (336) FLORIDA 1600 E. Lake Mary Boulevard / Sanford, Florida / (407) / FAX (407) Toll Free in Florida SOUTH CAROLINA Metal Distributors, Inc. PO Box 4004 / West Columbia, SC / 1630 Old Dunbar Road / West Columbia, SC (803) / FAX (803) SOME ITEMS MAY NOT BE CARRIED IN STOCK. PRICES ARE AVAILABLE UPON REQUEST. 37 OP820301MH (Rev. 2 02/07)