Polar - Clima LED. Housing: made of die-cast aluminium.

Transcription

1 250 Polar - Clima Housing: made of die-cast aluminium. Cover: made of aluminium plate. Coating: in several stages. First stage: grey epoxy cationic electrocoating, resistant to corrosive and saline environments. Second stage: UV stabilising priming; final stage: a rough finish with or sandsilver acrylic paint. Equipment: 6.3A protection fuse. Rubber cable gland, Ø 1/2 gas thread. LED LED Version

2 Polar 251 IPIK08 L=1210cm2 / ø SAP-E 70 1 and V2 self-extinguishing polycarbonate, UV stabilized, smooth outside, scored inside. 12 Polar S Max 1 SAP-E FLC 42 T/E AMITIES FIXTURES Lamps: FLC 42T/E 00K 30 lm ; 30K 9000 lm IPIK08 L=1506cm2 / ø and V2 self-extinguishing polycarbonate, UV stabilized, smooth outside, scored inside Polar S Max 1 SAP-E SAP-E FLC 42 T/E Lamps: FLC 42T/E 00K 30 lm ; 30K 9000 lm

3 Clima 252 L=1210cm2 / L ERGIA CHE TI ASCOLTA. ø SAP-E 70 3 IPIK08 Reflector: matt aluminium louvre. 14 Clima SAP-E SAP-E FLC 42T/E K - 30lm - Ra 1b 30K lm - Ra 2a L=1506cm2 / øø5 5 ø5 L ERGIA CHE TI ASCOLTA IPIK Reflector: matt aluminium louvre Clima SAP-E 5. SAP-E FLC 42T/E K - 30lm - Ra 1b 30K lm - Ra 2a

4 Clima 253 L=1210cm2 IPIK08 / ø L ERGIA CHE TI ASCOLTA SAP-E Reflector: matt aluminium louvre Clima K - 30lm - Ra 1b 30K lm - Ra 2a AMITIES FIXTURES SAP-E FLC 42T/E L=1506cm2 SAP-T...ST IPIK08 /E ø 5 CDO-ET...ME CDO-ET E L ERGIA CHE TI ASCOLTA Reflector: black aluminium louvre Zona 1 with black aluminium louvre Clima - zona 1 SAP-T 70 SAP-T 70 SAP-T SAP-T JM-E 70 JM-E CDO-ET CDO-ET K - 00lm - Ra 4 00K lm - Ra 4 00K lm - Ra 2a 30K lm - Ra 2a K lm - Ra 1b

5 254 Bastia Specify pole height. For poles and accessories, see chapter: Poles

6 Bastia 255 IP66IK08 Ø4 / L=1cm 590 Ø2 Housing/Cover: made of die-cast aluminium Diffuser: in vandal-resistant V2 self-extinguishing polycarbonate, UV-stabilized. LED Complete with socket-pin connector Bastia SAP-E SAP-E K - 50lm - Ra 4 SAP-E SAP-E K lm - Ra 4 JM-E JM-E K lm - Ra 1a K lm - Ra 2b AMITIES FIXTURES ø 211 ø 105 acc. 13 Corona flange Made of die-cast aluminium. Complete with 6 armstop devices to reinforce the assembly. ø 300 ø 125 acc. 14 Corona flange Made of die-cast aluminium. With 6 arm-stop devices to reinforce the assembly. 211 ø 170 ø acc Corona Made of die-cast aluminium. For up to 6 arms acc Equipped with terminal block. 224 ø 2 ø acc Corona Made of die-cast aluminium. It permits the arm mounting acc Complete with terminal block. 1030/1530 ø acc upward arm ø 30 steel. acc upward arm Ø steel. 2 ø 72 acc. 301 arm Oliva Made of aluminium. To be used with acc. 300 for pole mounting or acc. 302 for wall mounting acc. 302 wall mounting Made of aluminium To be installed with acc. 301 on the wall arm. ø 138 acc. 303 connection ø Made of aluminium. To be always used with acc. 301 for pole arm installation. ø ø acc. 300 Oliva In aluminium. For installation on ø pole of the arms acc. 301