Master of Science, Civil Engineering 1992 Inst. of Technology, Lund University.

Transcription

1 NAME N. Staffan Svensson Curriculum Vitae DATE OF BIRTH June 13 th 1967 ADDRESS Technical University of Denmark Dep. of Civil Engineering Brovej Bygning Kgs. Lyngby, Denmark Phone No: ACADEMIC DEGREES Ph.D Dept. of Structural Engineering Inst. of Technology, Lund University. Licentiate in Engineering 1995 Dept. of Structural Engineering Inst. of Technology, Lund University. Master of Science, Civil Engineering 1992 Inst. of Technology, Lund University. PROFESSIONAL EXPERIENCE Associate Professor in Wood Science and Technology Technical University of Denmark Kgs. Lyngby, Denmark Associate Professor in Structural Engineering Aalborg University Aalborg, Denmark 2001 Guest Professor/researcher in Wood Science University of British Columbia Vancouver, BC. Canada 2000 Senior Researcher, (part-time) Danish building research institute (SBI) Hørsholm, Denmark Assistant Professor in Structural Engineering (sabbatical 2001) Lund University Lund, Sweden Research assistant, Division of Structural Engineering Lund University Lund, Sweden AWARD STINT(The Swedish foundation for international cooperation in research and higher education) post-doc scholarship for one year of research on wood composites at the University of British Columbia, Dept. of Wood Science. 1/8

2 APPOINTMENTS COST Domain Committee expert; for Forests, their Products and Services. Member of the S-1995 committee for timber structures and EWP at DS Danish Standards. Member of the board for grants within Forestry and Timber Industry product development, for the Ministry of Environment, Denmark. Member of the technical assessor corps for the Danish Accreditation and Metrology Fund DANAK Management committee member and national expert within the COST action FP0802 Experimental and Computational Micro- Characterisation Techniques in Wood Mechanics Management committee member and national expert within the COST action E55 Performance of timber structures Member of the Danish national wood research center. Member of the external examiners corps, Denmark Aalborg University expert within structural engineering, especially timber structures and wood science, time and climatically dependent material behavior Member of the board for the Department of Building Technology and Structural Engineering at Aalborg University National expert within the COST action E24 "Reliability analysis of timber structures" RESEARCH INTERESTS Theoretical and experimental work within the following wood science topics are main research focus: Mass transport in porous solids Fixation (sorption) of matter Time delayed material response to mechanical excitation Hygro-mechanical behavior of materials ADMINISTRATION OF EDUCATION onward Director of study for the graduate program (M.Sc.) at the school of Civil Engineering, Technical University of Denmark Coordinator of study for semesters five and six at the school of Civil Engineering, Aalborg University. 2/8

3 TEACHING 2006 At my present position at the Department of Civil Engineering, Technical University of Denmark I am responsible for the Wood science and technology teaching. I am course holder and lecturer in: Material Science, Undergraduate Course Wood Science and Technology, Graduate Course Another part of my teaching responsibilities concerns supervision of graduate and under graduate students during thesis work : For all the courses taught, at the Department of Building Technology and Structural Engineering at Aalborg University, my teaching responsibilities included a substantial amount of work with course development, finding and writing course material. The courses I was responsible for and lectured in are listed below: Structural Mechanics, Beams and plates Structural Mechanics, Advanced course on elastic beam theory Structural Engineering, Design of steel structures, Introductory Course Structural Engineering, Design of steel structures, Advanced Course Structural Engineering, Design of timber structures Structural Engineering, Design of structures with prefabricated elements The pedagogic form at Aalborg University includes teaching with a problem-based and project-organized model, within groups of five to seven students. I have on average supervised and evaluated, within the field of structural engineering and mechanics, five project groups each semester. Another part of my teaching concerned supervision of master students. I supervised and evaluated annually about five master students in their master work at the school of civil engineering at Aalborg University : During my time at the Division of Structural Engineering at Lund University I have on average been involved in teaching one semester annually. My teaching included tasks such as course organizer, lecturing for larger groups of students, and also classroom teaching with smaller groups. The courses I taught are listed directly below: Structural Engineering, Introductory Course Structural Engineering, Computer aided design Structural Engineering, Design of concrete structures, Introductory Course Structural Engineering, Design of steel structures, Introductory Course Structural Engineering, Design of timber structures, Advanced Course 3/8

4 Structural Engineering, Design of steel structures, Advanced Course Reliability of Structures, Introductory Ph.D. Course Another part of my teaching responsibilities was to supervise diploma work at master level. SUPERVISION Principal supervisor, Ph.D. Candidates Engelund, E. T : Wood water interactions. Linking molecular level mechanisms with macroscopic wood performance. Dept. of Civil Engineering, Technical University of Denmark. Astrup, T. ( ): Modeling crack propagation in wood accounting for transient moisture condition and non-linear material constitution. Dept. of Civil Engineering, Technical University of Denmark. Frandsen, H. L. ( ): Shape stability of engineered wood products. Dept. for Building Technology and Structural Engineering, Aalborg University. Assistant supervisor for 3 Ph.D. Candidates ( ) Principal supervisor for +30 M.Sc. Candidates during thesis work Principal supervisor for +20 B.Sc. Candidates during thesis work PUBLIC ACADEMIC EXAMINATIONS REVIEW OF ACADEMIC STANDARD REVIEW OF JOURNAL MANUSCRIPTS CONFERENCE COMMITTEE Ph.D. Candidate A. Kjellow on Super critical carbon dioxide treatment of wood Copenhagen University 2010 As a member of the Danish external examiners corps I participate as examiner frequently on undergraduate and graduate level. Assessment of applicants for the position Associate Professor at University of British Columbia UBC 2010 Assessment of research proposal submitted to the ETH Zurich Research Commission for scientific evaluation 2009 Assessment of applicants for the position Associate Professor at Copenhagen University 2008 Approximately 10 manuscripts annually for international journals: Holzforschung Canadian Journal of Civil Engineering Engineering Structures Member of the scientific committee of SHATIS 11 Lisbon, Portugal 2011 Member of the local organizing committee of the International Federation for Information Processing, IFIP s 12th WG 7.5 th working conference on Reliability and Optimization of Structural Systems Aalborg, Denmark 2005 Chairman of the organizing committee of the National Wood Mechanics Conference, Lund, Sweden /8

5 CONFERENCE SPECIAL Invited speaker (plenary) at Colloquium on Physics and Reliability of Wood and Wood Composites organized by ETH and EMPA, Zürich Switzerland 2009 Keynote lecture at WCCM8 ECCOMAS5 Venice, Italy 2008 SIDE-LINING Consulting work with own small enterprise: Consulting for Danak, The Danish Accreditation and Metrology Fund: 2007 ca. two audits at test laboratory annually Consulting for Swedac, The Swedish Board for Accreditation and Conformity Assessment: 2007 three to four audits at test laboratory annually. PUBLICATIONS Publications in peer reviewed journals (tot. 22): Eitelberger, J., S. Svensson and K. Hofstetter, 2011: Theory of transport processes in wood below the fiber saturation point - Physical background on the microscale and its macroscopic description. Holzforschung, 65 DOI /HF.2011.XX Engelund, E. T. and S. Svensson, 2011: Modeling time-dependent mechanical behavior of softwood using deformation kinetics. Holzforschung, 65 DOI /HF Hozjan, T. and S. Svensson, 2010: Theoretical analysis of moisture transport in wood as an open porous hygroscopic material. Holzforschung, 64 DOI /HF Schoenmakers, J.C.M and S. Svensson, 2010: Embedment tests perpendicular to the grain -Optical measurements of deformation fields. European Journal of Wood Products DOI /s Svensson, S. 2009: Duration of load effects of solid wood; a review of methods and models. Wood Material Science and Engineering, 3-4; pp Thoft-Christensen P, H. L. Frandsen and S. Svensson, 2008: Numerical study of corrosion crack opening. Structure and Infrastructure Engineering Volume: 4 Issue: 5 pp Frandsen, H. L and S. Svensson, 2007: Implementation of sorption hysteresis in multi-fickian moisture transport. Holzforschung, 61, pp Frandsen, H. L, L Damkilde and S. Svensson, 2007: A revised multi- Fickian moisture transport model to describe non-fickian effects in wood. Holzforschung, 61, pp Frandsen, H. L, S. Svensson and L Damkilde, 2007: A hysteresis model suitable for numerical simulation of moisture content in wood. Holzforschung, 61, pp Sørensen, J. D. and S. Svensson, B. D. Stang, 2005: Reliabilitybased calibration of load duration factors for timber structures. Structural Safety 27 pp Jönsson, J. and S. Svensson, 2004: A contact free measurement method to determine internal stress states in glulam. Holzforschung, 58 pp Lam, F., S. Abayakoon, S. Svensson, and C. Gyamfi, 2003: Influence of proof loading on the reliability of members. Holz als Roh- und Werkstoff, 61 pp Svensson, S. and S. Thelandersson, 2003: Aspects on reliability calibration of safety factors for timber structures. Holz als Roh- und Werkstoff, 61 pp /8

6 Svensson, S. and T. Toratti, 2002: Mechanical Response of Wood Perpendicular to Grain when Subjected to Changes of Humidity. Wood Science and Technology 36, pp Svensson, S. and A. Mårtensson, Simulation of drying stresses in wood. Part II Convective Air Drying of Sawn Timber. Holz als Roh- und Werkstoff, 60, pp Toratti, T. and S. Svensson, 2000: Mechano-Sorptive Experiments Perpendicular to Grain under Tensile and Compressive Loads. Wood Science and Technology, 34 pp Svensson, S. and A. Mårtensson, Simulation of drying stresses in wood. Part I Comparison Between One and Two Dimensional Models. Holz als Roh- und Werkstoff, 57 pp Svensson, S., S. Thelandersson and H. J. Larsen, 1999: Reliability of Timber Structures under Long Term Loads. Materials and Structures, vol 32 pp Mårtensson, A., and S. Svensson, 1997b: Stress-Strain Relationship of Drying Wood. Part 2: Verification of a One - Dimensional Model and Development of a Two - Dimensional Model. Holzforschung 51, pp Mårtensson, A., and S. Svensson, 1997a: Stress-Strain Relationship of Drying Wood. Part 1: Development of a Constitutive Model. Holzforschung 51, pp Svensson, S. 1996: Strain and Shrinkage Force in Wood under Kiln Drying Conditions. II: Strain, Shrinkage and Stress under Controlled Climate Conditions. Equipment and Preliminary Results. Holzforschung 50, pp Svensson, S. 1995: Strain and Shrinkage Force in Wood under Kiln Drying Conditions. I: Measuring Strain and Shrinkage under Controlled Climate Conditions. Equipment and Preliminary Results. Holzforschung 49, pp Contributions to peer reviewed conferences (total 24): Svensson, S. and J. Köhler, Including moisture induced stresses in the safety format of timber structures. Proceedings of the 11th World Conference on Timber Engineering, Trento, Italy Svensson, S. and H. L. Frandsen, Numerical modeling of moisture transport in wood. 8th Word congress on computational mechanics and 5th European congress on computational methods in applied sciences and engineering, Venice, Italy Astrup, T., K. Kristensen; J. F. Olesen and S. Svensson, Inverse analysis of cohesive fracture in CT-tests. Proceedings of the 3rd International Symposium on Wood Machining, Lausanne, Switzerland. Astrup, T., K. Kristensen; J. F. Olesen and S. Svensson, Experimental verification of strain field in CT-Specimens during crack propagation. Proceedings of the 3rd International Symposium on Wood Machining, Lausanne, Switzerland. Engelund, E. T., T. Astrup, S. Svensson and P. Hoffmeyer Modelling time to failure in constant deformation experiments. Proceedings of the 9th World Conference on Timber Engineering Portland, Oregon, USA Svensson, S., T. Astrup and P. Hoffmeyer, Testing long-term behavior by a duration-of-deformation method. Proceedings of the 9th World Conference on Timber Engineering, Portland, Oregon, 6/8

7 USA. Frandsen, H. L, S. Svensson and L Damkilde, A new Model for Hysteresis applicable for Finite Element Simulations of Moisture Transport in Wood. International conference of the European society for wood mechanics, Firenze, Italy. Sørensen, J. D. and S. Svensson, Reliability-based modeling of moisture and load duration effects. Proc. COST E24 Conf. Probabilistic models in timber engineering, ARBORA (Ed.), Arachon, France, pp Thoft-Christensen, P., S. Svensson and H. L. Frandsen, D- Modeling of corrosion crack opening. Proc. of the 12th IFIP WG7.5 Conference on Optimization and Reliability of Structural Systems, Aalborg, Denmark Sørensen, J.D., B.D. Stang and S. Svensson, 2003: Effect of load duration on Timber structures in Denmark. Proc. of ICASP conference San Francisco, California, U.S. Köhler, J. and S. Svensson, 2002: Probabilistic modeling of duration of load effects in timber structures. Proc. of Meeting 35 CIB- W18, Koyoto, Japan. Lam, F., S. Abayakoon, S. Svensson, and C. Gyamfi, 2001: Influence of proof loading on the reliability of members. Proc. of Meeting 34 CIB- W18, Venice, Italy. Jönsson, J. and S. Svensson, 2000: Internal stresses in the Crossgrain Direction of Wood Induced by Climate Variations. Proc. of Meeting 33 CIB- W18, Delft, Netherlands. Svensson, S. and S. Thelandersson, 2000: Aspects on reliability calibration of safety factors for timber structures. Proc. of Meeting 33 CIB- W18, Delft, Netherlands. Larsen, H. J., S. Svensson and S. Thelandersson, 1999: Determination of Partial Coefficients and Modification Factors. Proc. of Meeting 32 CIB- W18, Graz, Austria. Svensson, S., S. Thelandersson and H. J. Larsen, 1999: Reliability of Timber Structures under Long Term Loads. Proc. of RILEM Symp. Timber Engineering, Stockholm, Sweden. Svensson, S. 1999: Hygro-Mechanical Model for Wood Drying. From material model to applicable tool. Proc. 6th Int. IUFRO Wood Drying Conference, Stellenbosch, South Africa. Toratti, T. and S. Svensson, 1997: Experimental study on mechanosorptive strain and internal stresses under fluctuations of humidity. Proc. Int. Conf. COST Action E8 Wood Mechanics, Wood-water relations, Copenhagen, Denmark. Svensson, S. and T. Toratti, 1997: Mechano-sorptive behaviour of wood perpendicular to grain. Proc. Int. Conf. COST Action E8 Wood Mechanics, Wood-water relations, Copenhagen, Denmark. Mårtensson, A. and S. Svensson, 1997: Behaviour of Drying Wood in the Direction Perpendicular to Grain. Int. Conf. of COST Action E8 Wood Mech. Copenhagen, Denmark. (14p) Mårtensson, A. and S. Svensson, 1996: Application of a Material Model Describing Drying Stresses. Proc. 5th Int. IUFRO Wood Drying Conference, Quebec City, Canada Svensson, S. 1996: Experimental Study on the Hygro-Mechanical Behaviour of Drying Wood. Proc. 5th Int. IUFRO Wood Drying Conference, Quebec City, Canada Svensson, S. 1996: Hygro-mechanical behaviour of drying wood. 7/8

8 Proc Int. Conf. Wood Mechanics, COST 508-Wood Mechanics, FMPA-Otto-Graf-Institut, Stuttgart, Germany, Svensson, S. 1994: Elementary tensile tests in a controlled climate, in Improving Wood Drying Technology. Proc. 4th Int. IUFRO Wood Drying Conference, Rotorua, New Zealand, New Zealand Forest Research Institute, Other publications (total 6): Sørensen, J.D., B.D. Stang and S. Svensson, 2002: Calibration of load duration factor. Report Department of Building Technology and Structural Engineering, Aalborg University. Thelandersson, S., H. J. Larsen, L. Östlund, T. Isaksson and S. Svensson, 1999: Safety levels of wood and wood products used in structures. In Swedish Rapport TVBK-3039, Div. Structural Engineering, Lund University. Svensson, S. 1997: Internal Stress in Wood Caused by Climate Variations. Rapport TVBK-1013, Dept. Structural Engineering, Lund University, Ph.D. thesis Östlund, L., S. Svensson and S. Thelandersson, 1995: Consequences and precaution of derail and collision when constructing parallel railways between Kävlinge and Lund. In Swedish Rapport TVBK- 7048, Dept. Structural Engineering, Lund University. Svensson, S. 1995: Hygro-Mechanical Behaviour of Drying Wood. Rapport TVBK-1010, Dept. Structural Engineering, Lund University, Licentiate thesis Svensson, S. 1992: Glued gypsum plasterboards on thin walled steel studs. In Swedish Rapport TVBK-5053, Dept. Structural Engineering, Lund University, Master thesis. 8/8