VŠB Technical University of Ostrava

Transcription

1 CEEPUS Network: CIII-RO Implementation and utilization of e-learning systems in study area of production engineering in Central European Region In cooperation with: Jan Evangelista Purkyně University in Ústí nad Labem VŠB Technical University of Ostrava Tomáš Baťa University in Zlín And other 21 partners from Romania, Serbia, Croatia, Hungary, Moldavia, Bulgaria, Poland and Slovakia 6/2/2014 1

2 VŠB Technical University of Ostrava Faculty of Mechanical Engineering Department of Machining and Assembly coordinator Doc. Čep Machining of heavy machinability materials, Application of CAD/CAM systems at machining, Study of temperature field during machining, Engineering metrology, Cutting tool tests at interrupted machining, Cutting tool wear monitoring, Machinability determination of new construction materials;

3 Tomáš Baťa University in Zlín Faculty of Technology Department of Production Engineering coordinator Prof. Lukovics Manufacturing and operating of cutting tools especially for grinding process, Design and manufacturing of tools for plastic materials, Computer aided design and manufacturing, New trends in technology: nanotechnology, rapid prototyping, rapid tooling, high speed cutting, environment friendly technologies

4 Jan Evangelista Purkyně University in Ústí nad Labem Faculty of Production technology coordinator Dr. Náprstková CAD, CAM, CAE, logistics,

5 Faculty of Production technology Incoming in 2012/ teachers (1 from Hungary, 3 from Slovakia), 1 Ph.D student from Moldova Outgoing in 2012/ teachers (2 to Slovakia, 2 to Romania) 1 Ph.D student to Slovakia Activities at FPTM courses of CATIA design, CATIA technology, CNC programming, Solidworks, EdgeCam for participants of web

6 Jan Evangelista Purkyně University in Ústí nad Labem FPTM is part of JEPU in Ústí nad Labem. Parts of JEPU: Faculty of Production Technology and Management Faculty of Environment Faculty of Art and Desing Faculty of Phylosophy Faculty of Health Studies Faculty of Education Faculty of Social and Economic Studies

7 General Information about FPTM In 1998 was established Institute of Production Technology and Management by transformation of Institute of Technical Education (at the Faculty of Education) In 2006 it was transformed to the Faculty Number of students: approx. 850 (future technicians) Faculty staff: approx. 45

8 Departments of FPTM Department of Technology and Material Engineering - DTME (KTMI in Czech language) Department of Machines and Mechanics - DMM (KSM in Czech language) Department of Management and Economics - DME (KMEP in Czech language) Department of Energy and Electrical Engineering DEEE - new (KEE in Czech language)

9 Deanery of FPTM Address: Na Okraji Ústí nad Labem Sitting place of FPTM deanery, Departments of Machines and Mechanics and Energy and Electrical Engineering, Study office

10 Sitting place of Departments of Technology and Material Engineering, Department of Management and Economics,, laboratories of DTME Building H in campus JEPU Address: Pasteurova 7, Ústí nad Labem

11 Study programs at FPTM Bachelors study Programme title/branch Form Length of study Production Technology Management of Production Engineering Materials and technologies in transport Full-time and part- time study FTS, PTS 3 years 3 years Energetics Energetics - heating plants Engineering Assurance of Manufacturing FTS, PTS FTS 3 years 3 years

12 Study programs at FPTM Master study programme MSc. Programme title/branch Form Length of study Production Technology Planning and Production Management FTS, PTS 2 years Engineering Materials and technologies in transport FTS, PTS 2 years

13 Study programs at FPTM Postgraduated study programme Ph.D. Programme title Type of programme Form Production Technology doctoral FTS, PTS

14 Areas of Scientific and Researching Activities Integrity of loaded surfaces Research in the field of alluminium alloys Destructive and nondestructive material testing Heat treatment Dynamic and kinematic analysis, synthesis and optimization of mechanisms Gas and liquid flow and heat transfer Character and momentum transfer in the system of elastic and viscoelastic solids, isotropic and orthotropic (project GACR). Precision methods of metal and ceramics machining Research of face properties for machining parts Research in area of materials and corrosion Mechanics of solid and deformable bodies

15 Some of Our Devices Corrosion box Rapid prototyping Laser microscope LEXT

16 Some of Our Devices thermal camera high speed camera videoscope

17 Laboratories Laboratory of Corrosion Laboratory of Thermal Treatment Laboratory of Sample Preparation and Chemistry Laboratory for Destructive Material Testing Laboratory of Mashining Metalography Laboratory Laboratory for Nondestructive Testing of Materials Laboratory of Precision Measuring Mechanics Laboratory Laboratory of Thermodynamics

18 Laboratory of Corrosion

19 Laboratory of Thermal Treatment

20 Laboratory of Sample Preparation and Chemistry

21 Laboratory for Destructive Material Testing

22 Laboratory of Mashining

23 Metalography Laboratory

24 Laboratory for Nondestructive Material Testing

25 Laboratory of Precision Measuring

26 Mechanics Laboratory

27 Laboratory of Thermodynamics

28 Stand for the investigation of vibration of a rigid body Hydraulic bench for the experimental investigation of models of hydraulic machinery and equipment

29 Thank you for you attention