CURRICULUM VITAE. Dr. Mohd Afandi P Mohammed Jabatan Kejuruteraan Proses dan Makanan, Universiti Putra Malaysia, UPM Serdang, Selangor, Malaysia

Transcription

1 CURRICULUM VITAE Dr. Mohd Afandi P Mohammed Jabatan Kejuruteraan Proses dan Makanan, Universiti Putra Malaysia, UPM Serdang, Selangor, Malaysia T: F: M: afandi@upm.edu.my Education 1. PhD & DIC, Mechanics of Materials, 2012, Imperial College London 2. Master of Manufacturing Systems Engineering, 2008, Universiti Putra Malaysia 3. B.Eng (Mechanical), 2006, Universiti Putra Malaysia Food mechanics, Plant biomechanics Areas of Interest Professional Qualification/ Membership/ Affiliation Graduate Member, Board of Engineers Malaysia (BEM); Member, Society of Rheology; Professional Member, Malaysian Society of Agricultural Engineers (MSAE) Appointments Position 1. Senior lecturer, Department of Process and Food Engineering, Universiti Putra Malaysia 2. Postdoctoral, Department of Mechanical and Materials Engineering, Universiti Kebangsaan Malaysia 3. Tutor, Department of Process and Food Engineering, Universiti Putra Malaysia 4. Process and Equipment Engineer, Engineering Department, Philips/NXP Semiconductors Malaysia Duration to date Journals Publications/Outcomes DM Parid, NA Rahman, AS Baharuddin, MAP Mohammed, AM Johari, SZA Razak Synthesis and characterization of carboxylmethyl cellulose from oil palm empty fruit bunch stalk fibres. Bioresources 13(1): (Q2 JCR 2017) FN Omar, HS Hafid, AS Baharuddin, MAP Mohammed, J Abdullah Oil palm fibers biodegradation: Physico-chemical and structural relationships. Planta, 246(3): (Q1 JCR 2016) 3. MAP Mohammed, L Wanigasooriya, S Chakrabarty-Bell, MN Charalambides Extrusion of unleavened bread dough: Experiments and simulations. Journal of Rheology, 61(1): (Q1 JCR 2016) 4. SH Hanipah, LY Xiang, MAP Mohammed, AS Baharuddin Study of non-linear mechanical behaviour of oil palm mesocarp fibres. Journal of Natural Fibers, 14(2): (Q2 JCR 2016) 5. NHS Md-Yunos, CC Jie, AS Baharuddin, MN Mokhtar, A Sulaiman, MA Rajaeifar, YN Larimi, AF Talebi, MAP Mohammed, M Aghbashlo, M Tabatabaei Enhanced oil recovery and lignocellulosic quality from oil palm biomass using combined pretreatment with compressed water

2 2016 and steam. Journal of Cleaner Production, 142: (Q1 JCR 2016) 6. FN Omar, SH Hanipah, LY Xiang, MAP Mohammed, AS Baharuddin, J Abdullah Micromechanical modelling of oil palm empty fruit bunch fibres containing silica bodies. Journal of the Mechanical Behavior of Biomedical Materials, 62: (Q1 JCR ) 7. LY Xiang, MAP Mohammed, AS Baharuddin Characterisation of microcrystalline cellulose from oil palm fibres for food applications. Carbohydrate Polymers, 148: (Q1 JCR ) 8. M Saifullah, YA Yusof, NL Chin, MG Aziz, MAP Mohammed, NA Aziz Dissolution profiling and its comparison of natural fruit powder effervescent tablets. Journal of Food Engineering, 178: (Q1 JCR ) 9. SH Hanipah, MAP Mohammed, AS Baharuddin Non-linear mechanical behaviour and biocomposite modelling of oil palm mesocarp fibres. Composite Interfaces 23(1): (Q3 JCR ) 10. SB Tan, R Shamsuddin, MA Mohammed, NA Rahman Effect of mixing period, water and sugar on the sesame cracker dough stickiness. International Food Research Journal, 23: S249- S254. (Q3 JCR 2017) 11. LY Xiang, SH Hanipah, MAP Mohammed, AS Baharuddin, AM Lazim.. Microstructural, mechanical, and physicochemical behaviours of alkali pre-treated oil palm stalk fibres. BioResources 10(2): (Q1 JCR 2014) 12. FN Omar, LY Xiang, LY Lie, CA Dzulkornain, MAP Mohammed, AS Baharuddin.. Investigation of physico-chemical properties and microbial community during poultry manure cocomposting process. Journal of Environmental Sciences 28: (Q2 JCR 2014) FN Omar, MAP Mohammed, AS Baharuddin Effect of silica bodies on the mechanical behaviour of oil palm empty fruit bunch fibres. BioResources 9(4): (Q1 JCR 2013) 14. MAP Mohammed Visco-hyperelastic model for soft rubber-like materials. Sains Malaysiana 43(3): (Q3 JCR 2013) 15. FN Omar, MAP Mohammed, AS Baharuddin Microstructure modelling of silica bodies from oil palm empty fruit bunch (OPEFB) fibres. BioResources 9(1): (Q1 JCR 2013) MAP Mohammed, E Tarleton, MN Charalambides, JG Williams Mechanical characterization and micromechanical modeling of bread dough. Journal of Rheology 57(1): (Q1 JCR 2012) Conferences 1. MAP Mohammed, L Wanigasooriya, S Chakrabarty Bell, MN Charalambides. Experimental and Numerical Investigation of Ram Extrusion of Bread Dough. 8th International Conference of the Hellenic Society of Rheology. Limassol, Cyprus (2017) 2. MAP Mohammed, L Wanigasooriya, MN Charalambides. Experimental and Numerical Investigation of Ram Extrusion of Bread Dough. ESAFORM 2016, Nantes, France (2016). (AIP Conference Proceedings 1769: (2016)) 3. SH Hanipah, FN Omar, LY Xiang, MAP Mohammed, AS Baharuddin, J Abdullah. Micromechanics of oil palm fibres with silica bodies. 8 th Plant Biomechanics International Conference, Nagoya, Japan () 4. SH Hanipah, MAP Mohammed, AS Baharuddin. Oil Palm Mesocarp Fiber (OPMF): Non-linear mechanical behavior. Postgraduate Symposium on Biocomposite Technology. Serdang, Selangor, Malaysia () (SH Hanipah awarded the best poster presenter) 5. SH Hanipah, MAP Mohammed, AS Baharuddin. Modelling heterogeneous solids using a combined viscoelastic-viscoplastic and visco-hyperelastic model. The Postgraduate Symposium on Composite Science and Technology, Putrajaya, Malaysia (2014) 6. MAP Mohammed, E Tarleton, MN Charalambides, JG Williams. Mechanical characterisation and

3 micromechanical modelling of bread dough. Poster Presentation, The Graduate School Summer Research Symposium, Imperial College London, UK (2012) 7. MAP Mohammed, E Tarleton, MN Charalambides, JG Williams. A composite model for wheat flour dough under large deformation. Poster Presentation, Mechanical Engineering Department Research Showcase 2012, Imperial College London, UK (2012) 8. MAP Mohammed, E Tarleton, MN Charalambides, JG Williams. A composite model for wheat flour dough under large deformation. 11th International Congress on Engineering and Food (ICEF11), May 2011, Athens, Greece. (Procedia Food Science 1: (2011)) 9. MAP Mohammed, E Tarleton, MN Charalambides, JG Williams. Mechanical characterisation and constitutive modelling of wheat flour dough. Non-Newtonian Club Meeting, British Society of Rheology, 10th November 2010, London, UK. (British Society of Rheology: Rheology Bulletin 52(1): 2011, ISSN (2010)) 10. MAP Mohammed, E Tarleton, MN Charalambides, JG Williams. A micromechanics model for bread dough. Eight International Conference of Computational Methods in Sciences and Engineering (ICCMSE 2010), 3-8 October 2010, Kos, Greece. (AIP Conference Proceedings 1642: ()) Patents 1. AS Baharuddin, MAP Mohammed, NA Rahman, MS Anuar, M Wakisaka, LY Xiang Green and rapid method for producing microcrystalline cellulose from oil palm stalk fibres (OPSF). PI (Patent pending) Reviewer for journals/proceedings Composite Interfaces (); Agriculture and Agriculture Science Procedia (); International Journal of Biological Macromolecules (2016); Carbohydrate Polymers (2016,2017,2018); The Journal of the Textile Institute (2018) Research seminars/talk 1. My experience of study abroad- PhD study at Imperial College London Seminar for Globally Aware Researchers. Kyushu Institute of Technology, Kitakyushu, 27th March Mechanical characterization and constitutive modelling of wheat flour dough. Non-Newtonian Club meeting, British Society of Rheology, London, 10th November Research Projects (PI) No Grant project Title Amount (RM) Year 1. Multiphysics mechanics of microbial agent and 100, lignocellulosic materials for degradation process Biomechanics of oil palm fibre biodegradation 20, Experimental and numerical investigation of 44, micromechanical behaviour of oil palm empty fruit bunch 4. Micromechanical investigation of lignocellulosic materials under micro, meso and ultra-structures 84, Fund Name Putra Grant (Putra Berimpak) Putra Grant (IPS) Putra Grant (IPM) Fundamental Research Grant Scheme Other Projects Kyutech-UPM International Internship, RM12, Kyutech Educational Program Kyutech-UPM International Internship, RM5,250, Kyutech Educational Program. International Collaboration Dr. Maria Charalambides, Imperial College London, UK Assoc. Prof. Dr. Minato Wakisaka, Kyushu Institute of Technology, Japan Awards/Recognition

4 No Award Name Title Award Authority Award Type Year 1. Anugerah Perkhidmatan Cemerlang Majlis Gemilang Putra 2018 Universiti Putra Malaysia University Insentif Makalah Jurnal Majlis Apresiasi Penyelidikan UPM Universiti Putra Malaysia University ScienceDirect Top 25 List of Most Downloaded Articles (Jan-Dec 2012) A Composite Model for Wheat Flour Dough under Large Deformation ScienceDirect International Food Engineer of the Year Award 2011 A Composite Model for Wheat Flour Dough under Large Deformation Institution of Mechanical Engineers, UK. International 2011 Student Supervision PhD No Name Research Status 1. Ahmad Tarmezee Talib Biomechanics of Oil Palm Fibre Biodegradation On-going (GS47760) -main SV 2. Suhaiza Hanim Hanipah Micromechanics of Oil Palm Mesocarp Fibres (GS38212) -main SV and Composites 3. Farah Wahida Ahmad Nanoencapsulation of anticancer Drug On-going Hamidi (GS45704) co SV 4. Nazatul Shima Azmi Active Food Packaging System On-going (GS48684) co SV 4. Loo Yu Xiang (GS37627) Microcrystalline cellulose from oil palm fibres -co SV 5. Farah Nadia Omar (GS35338) -co SV Strain improvement for oil palm fibres MSc No Name Status 1. Dzieda Muhamad Parid Oil palm derived stabilizer Application in ice (GS43868) co SV cream 2. Md Saifullah (GS35172) -co SV Dissolution characteristics of selected fruit tablets with effervescent agents Final Year Project No Name Title Status 1. Kong Kah Mun Sheeting mechanics of limited materials 2. Fan Yew Fang In situ ice-cream structure mechanical investigation 3. Nurazlina Mohd Ruslan Mechanics of rice grains due to milling process Jais 4. Ng Chin Kai Rheological characterization of flour dough constituents 5. Emi Zuziana Mohd Zulkifli Mechanical behaviour of instant ice-cream 6. Lee Jiat Ling Mechanical characterisation of multilayer films for aseptic packaging application 7. Nur Leha Mansor Mechanical behavior of fresh oil palm mesocarp fibers 8. Lee Xiao Fen Mechanical behaviour of starch film reinforced with microcrystalline cellulose

5 No Name Title Status 9. Jackson Lim Hwa Keen Micromechanical characterization of treated and untreated oil palm mesocarp fiber (OPMF) 10. Lim Soo Ying Rheological behaviour of oil palm mesocarp fibre (OPMF) micro-components Teaching EPF3301 Computer programming for process engineers (Sem 2 12/13, Sem2 13/14); EPF3701 Packaging engineering (Sem 1 13/14); EMM3102 Statics (Sem 1 15/16); EMM3108 Strength of materials (Sem 2 15/16); ECC3003 Engineering mathematics III (Sem 1 16/17); EMM 3518 Computer aided engineering drawing (Sem 2 16/17); EPF3109 Numerical and computer methods (Sem 1 17/18); ECC3002 Engineering mathematics II (Sem 2 17/18); EPF4704 Food Engineering Operation (Sem 1 18/19) Position Administrative work Duration Department Academic Coordinator Head, Agricultural Process Engineering Laboratory Head of new program elective courses (Processing Machine Design Engineering Option) Sponsorship and promotion secretariat, International Conference on Agricultural and Food Engineering (CAFEi2014 & CAFEi2016)