Horgoş A. 1*, Becherescu Alexandra 1, Popa D. 1, Drăgunescu Anca 1, Ienciu Anişoara 1, Neag T. 2. Material and Method

Size: px
Start display at page:

Download "Horgoş A. 1*, Becherescu Alexandra 1, Popa D. 1, Drăgunescu Anca 1, Ienciu Anişoara 1, Neag T. 2. Material and Method"

Transcription

1 Volume 16(1), , 2012 JOURNAL of Hortiulture, Forestry and Biotehnology Inreasing produtive effiieny of a ulture of mushroom Agarius bisporus as a result of improvement of tehnologial links for nutrient substrate ultivation and plant protetion Horgoş A. 1*, Beheresu Alexandra 1, Popa D. 1, Drăgunesu Ana 1, Ieniu Anişoara 1, Neag T. 2 1 Banat s University of Agriultural Sienes and Veterinary Mediine Timişoara; 2 Family Assoiation *Corresponding author. Abstrat Cultivation of Agarius bisporus mushrooms (Champignon mushrooms), in areas that originally had another purpose (warehouses, stables, workshops to raise hikens or hens, et.), requires ompliane and enforement largely of the same tehnologies of ulture. But some adjustments are needed in the way of settlement of the rop nutrient substrate prodution building, urrently using two methods of settlement on the shelves: the reipients of PE foil bags plaed vertially and PE foil ontainers of retangular shape plaed horizontally. Initiated researh aimed at determining the best type of ontainer for use in ulture, in terms of overage using a mixture prepared by different reipes and substrate ombat nematodes and insets flying in the loal air, with various produts (Nemasys M, Dimilin). Establishing onlusions and reommendations was based on quantifying produtive effiieny for a prodution yle and then for one year. Key words spae, loal ulture, prodution, tehnology, ontainer, nutritive substrate, nematodes, insets Culture systems - traditional, semiintensive and intensive industrial (monozonal, bizonal and plurizonal) involve the introdution and settlement of ulture nutritive substrate (ompost) in a loal ulture based on eah speifi ulture tehnology by several methods, differing: hillok ultures as arranged on the floor; ulture as hilloks arranged on shelves; ulture as flat layers; ulture in polyethylene bags or other ontainers. Until 1971, the ulture method in polyethylene bags in Romania was unknown, being experiened in small areas later this year. Sine 1981, in mushroom ulture began to be used with priority polyethylene bags. There are different variations of size of polyethylene bags, with different apaities of filling the nutritive substrate, depending on their size. Bags filled with ulture substrate by settlement sit in the building of ulture aording to their shape in longitudinal or transverse rows. The bags an also be used for ulture on shelves with 1-3 storey parapets, onstruted of preast onrete, metal mesh or reinfored onrete. Reuse is possible only if it s the heat treatment with steam at a temperature of o C for 4-5 hours or with Basamid GR or Dazomet 98% in quantity of 10 g/m 2 in warm period (15 June -15 July). Mushroom ulture in polyethylene bags or other ontainers, has the following advantages: nutritive substrate in bags is proteted by infestation with nematodes, filling bags with onsumption is less labor, building the ulture is more diffiult to infest speifi pests and diseases even after several yles of ultural ahievement, as infetions are loalized in a single bag, with limited expansion possibilities, introdution and evauation of the premises of the ulture bag is more advantageous ompared with flat layers or hilloks, being easier their individual handling, the nutritive substrate an be transported to greater distanes from the plae where they were omposting, without ausing its immediate and imminent infestation with pathogens on the transport route. In intensive ulture system settlement substrate runs in two forms: on the shelves - for monozonal ulture in rates - for bizonal and plurizonal ulture. Currently in private mushroom farms operating in our ountry are used mainly as reipients of ulture bags, PE bags and retangular shape ontainers whose dimensions are shown in Table 1. Material and Method Initiated researh on adaptation mushroom ulture tehnology in other spaes, whih originally had another purpose, and effet of use in prodution of two different types of retangular shape ontainers and preparation reipes of the mixture over and the produts insetiides nematoide (Nemasys M and Dimilin) used to maintain plant hygiene substrate ulture and ultural premises, took plae in SC Champignon SRL Arad, a private ompany whih has built mushroom prodution using prodution halls of a former hiken farm (Aviola - Arad). Transforming growth halls of hikens for meat or poultry for eggs was performed making use of 184

2 numerous design knowledge, on speifi issues of mushrooms ulture. Currently, the mushroom farm that was founded operates in full design apaity, meets the attributes of a modern mushroom farm equipped with heating and ooling (winter and summer), the prodution yle is arried out in ontinuous flow with fored mehanial ventilation and humidity from mirolimate in ulture rooms, all of whih are omputer ontrolled under a program established pursuant to ulture tehnology. The aim of researh was initiated to determine whih of the two types of retangular shape ontainers (bags of PE foil or retangular ones), plae on raks in a different ulture room are best plaed to use in prodution and preparation of reipes overing a mixture of ulture nutritive substrate to best prodution results, both aspets being pursued in onditions of limiting and ontrolling nematodes and insets using different produts as nematoide and insetiides. Nutritive substrate ulture is imported under ontrat from speialized ompanies in Hungary, being plaed in individual retangular shape ontainers of types mentioned before. Initiated researh objetives relate to prodution monitoring: differentiated the two types of reipients, by using two reipes for preparing the mixture over for over rop nutritive substrate (mixture made from additive peat; farm soil 50% and blak peat 50%) in both types of retangular shape ontainers in terms of limiting and ontrolling nematodes and insets in the ulture of loal air there were used Nemasys M and and the insetiide Dimilin, applied alone or in ombination. It was initiated a polyfatorial type of experiene where experimental fators are: Fator A The settlement of ompost in the ulture loal a 1 in ontainers - polyethylene bags plaed vertially on shelves with 3 levels; a 2 in polyethylene retangular shape ontainers plaed horizontally on shelves with 3 levels; Fator B Cover mixture preparation reipe: b 1 reipe I mixture made from additive peat; b 2 reipe II mixture made from farm soil 50% + blak peat 50%; Fator C Produts used to ontrol nematodes and insets flying in the atmosphere of ulture plae 1 Not treated ontrol (C) 2 Treatment with Nemasys M; 3 Treatment with Dimilin; 4 Combined treatment with Nemasys M and Dimilin For both types of ontainers was used the nutritive substrate (ompost) prepared in stage III, whih allows in a alendar year up to 8 yles. Depending on the stage of preparation of ompost duration of a rop yle an be: - 60 days for ompost prepared in stage II, of whih 54 of inubation and harvesting and 6 days for evauating the used nutritive substrate and for preparing a new prodution yle; 365 days/year: 60 days/yle = 6 yles of prodution/year; - 46 days for ompost prepared in stage III, of whih 40 of inubation and harvesting and 6 days for evauating the used nutritive substrate and for preparing a new prodution yle; 365 days/year: 46 days/yle = 7,9 8 yles of prodution/year. Results and Disussions In tables 1 and 2 and figure 1 there are presented tehnial details regarding the arrangement of a room and of a hall prodution (module) whih has two rooms. It follows from this table that the floor area of a room that is 190 m 2, has a orresponding surfae area of 240 m 2 surfae resulting from adding raks with three levels. Tehnial details of the arrangement of a ulture room at SC Champignon SRL Arad Total surfae (m 2 ) Culture room No.of No. levels Plane rak level Reipient type surfae (m 2 ) levels on rak surfae (m 2 ) PE bags Retangular PE reipients L x l = 20 x 10 = 200 L x l = 20 x 10 = L x l = 17 x 1,2 = 20 L x l = 17 x 1,2 = 20 rak with three levels no.of rows on a three level rak total surfae /room Table 1 reipient dimensions (m) = 38,2 l = 60 h = 20 L x l x h = 60 x 40 x 15 Using PE bags and retangular PE ontainers filling apabilities of a room for the nutritive substrate (ompost inubated in stage III) is shown in Table 2. Researhes were developed in a ulture in whih there were used both types of reipients, retangular ones (a 2 ) being plaed on the surfae of the three level raks with width base area equal to the rak, so that their united surfaes will show a ontinuous surfae. 185

3 Filling apabilities with nutritive substrate (n.s.) in stages II and III of preparation Total no.of Duration of a prodution yle Average No. Quantity of n.s. reipients / weight of n.s. reipients/m Reipient type / ulture room 2 ulture room n.s. stage II * n.s. stage III ** /reipient rak surfae (t) (ps.) (kg) (ps) PE bags ,800 Retangular PE reipients , days + 6 evauation days = 60 days 54 days + 6 evauation days = 60 days 40 days + 6 evauation days = 46 days 40 days + 6 evauation days = 46 days Table 2 No. reipients / row on a three level rak ,2 252 *) n.s. stage II = pasteurized and onditioned ompost inoulated with granule myelium (no inubation) **) n.s. stage III = pasteurized and onditioned inoulated ompost with days inubation Fig. 1. Outline plan of a prodution loal for Agarius bisporus ulture (two rooms module with general utilities): V ventilation system; CT heating/ooling system; C omputer ontrol system In table 3 and figure 2 there are presented the obtained experimental results when using PE bags (a 1 ) and retangular reipients (a 2 ), the two types over mixtures (b 1 additive peat b 2 farm soil 50% + blak peat 50%) and when using the different treatment substanes for ontrolling pests ( 2 - Nemasys M, 3 Dimilin, 4 - Nemasys M + Dimilin). We an see the differenes between the obtained produtions for eah of the two types of reipients used, meaning 36.3 % and 37.2 % a 1 (PE bags), respetively a 2 (retangular reipients). The average prodution obtained under the impat of fator A is 36.3%, respetively ulture surfae in a 1 (PE bags) and of 37.2 % and in a 2 (retangular reipients), meaning % respetively 99.8 % than de a 3 Mx (average value of the experiment). The differene is not signifiant leading to the onlusion that any of the reipients an be used in prodution. The statisti alulation in table 5, point 1, shows this beause there is no signifiane between the prodution differenes. Table 4 and figure 3 show the total produtions obtained under the impat of fator A, fator B and fator C, by ultivating mushrooms in 8 prodution yles of 46 days/yle during 365 days. 186

4 6,460 7,277 6,973 7,562 5,700 7,049 6,821 7,334 7,414 8,778 8,140 6,600 9,196 8,558 7,942 8,844 6,937 8,028 7,557 8,379 6,150 7,804 7,382 8,089 20,1 23,3 26,5 24,6 23,8 27,2 25,3 24,8 22,9 23,9 23,2 27,0 25,9 24,3 22,5 23,1 21,7 25,6 25,0 23,9 26,5 24,7 23,5 26,2 34,0 30,0 33,7 30,0 33,9 30,0 112,6 38,3 107,9 36,7 117,1 39,8 37,1 119,7 35,9 109,8 37,0 38,6 118,4 39,9 124,0 41,8 38,9 120,3 36,1 108,9 36,9 123,7 40,2 115,7 39,1 120,8 40,8 38,0 120,0 36,0 128,7 39,4 129,7 134,0 126,9 131,5 Fator: A B C a 1 a 2 a 3 (M x) b 1 Table 3 Experimental results of Agarius bisporus prodution by improving some tehnologial links onerning the over mixture and phyto-sanitary protetion No. mushr. /reipient (ps.) Average weight of a mushr. (g/bu) Average prodution/yle for: Fator C Fator B Fator A Prodution/ kg/100 No. Prodution/ t/ulture kg/100 No. Prodution/ t/ulture kg/100 reipient kg mushr. reipient mushr. reipient ulture room of kg n.s.* ulture room of kg n.s.* n.s.* room 240 m 2 /reipient or % room 240 m 2 /reipient Kg % Kg % Kg % or % or % 1 277,8 23,3 6,460 34,0 32,300 7, ,6 26,5 7, ,6 38,3 36,385 8, ,6 24,6 6, ,9 36,7 34,865 9, ,0 27,2 7, ,1 39,8 37,810 9,074 (ps.) 278,4 7,068 37,2 35,340 8,482 (ps.) ulture room t/ultur e room of 240 m 2 % 272,3 6,897 36,3 34,485 8, , ,3 23,8 5,700 30,0 28,500 6,840 b 2 278,6 25,3 7, ,7 37,1 35,245 8, ,2 6,726 95,2 35,4 33,630 8, ,3 24,8 6, ,7 35,9 34,105 8, ,6 27,0 7, ,7 38,6 36,670 8, ,0 22,9 7,414 33,7 31,139 7,473 b 2 366,8 23,9 8, ,4 39,9 36,868 8, ,0 8,382 38,1 35,204 8, ,2 23,2 8, ,8 37,0 34,188 8, ,0 25,9 9, ,0 41,8 38,623 9, ,8 8, ,7 37,2 34,373 8,250 99, ,7 20,1 6,600 30,0 27,720 6,653 b 2 352,2 24,3 8, ,7 38,9 35,944 8, ,6 7,986 95,3 36,3 33,541 8, ,0 22,5 7, ,3 36,1 33,356 8, ,5 25,6 8, ,0 40,2 37,145 8, ,9 23,1 6,937 33,9 31,720 7,613 b 2 320,7 25,0 8, ,7 39,1 36,627 8, ,7 7,725 37,7 35,272 8, ,6 23,9 7, ,9 36,9 34,527 8, ,5 26,5 8, ,8 40,8 38,217 9, ,6 7, ,3 36,8 34,429 8, ,5 21,7 6,150 30,0 28,610 6,866 b 2 315,4 24,7 7, ,9 38,0 35,595 8, ,4 7,356 95,2 35,9 33,586 8, ,2 23,5 7, ,0 36,0 33,731 8, ,6 26,2 8, ,5 39,4 36,908 8, ,2 22,4 6,544 32,0 30,165 7,240 * * * * * * * * * * * * 2 318,1 24,9 7, ,0 38,6 36,111 8,667 * * * * * * * * * * * * 3 315,4 23,7 7, ,2 36,5 34,129 8,191 * * * * * * * * * * * * 4 312,6 26,3 8, ,8 40,1 37,563 9,015 * * * * * * * * * * * * *) n.s. = nutritive substrate * 50 Greutatea medie iuperă (g/bu) Produţia medie ilu / reipient ( Kg) Produţia medie ilu (kg/100 kg substrat nutritiv de ultură sau %) Produţia medie ilu / reipient (%) b1- reteta I b2 reteta II b1- reteta I b2 reteta II b1- reteta I b2 reteta II a1 Sai din folie PE a 2 Reipienţi dreptunghiulari a3 Media experienţei (Mx) Fig.2. Experimental results of Agarius bisporus prodution by improving some tehnologial links onerning the over mixture and phyto-sanitary protetion 187

5 Table 4 Synthesis of the experimental results onsidering Agarius bisporus prodution, by improving some tehnologial links onerning the over mixture and phyto-sanitary protetion Average prodution obtained/year: Fator Fator C Fator B Fator A A B C a 1 a 2 a 3 (M x) b 1 b 2 b 1 b 2 b 1 b 2 kg/100 kg n.s. or % t/ulture room of 240 m 2 ulture room surfae 1 34,0 62, ,4 2 38,3 69, ,1 112,6 3 36,7 66, ,9 107,9 4 39,8 72, ,5 117,1 1 30,0 54, ,0 2 37,1 67, ,9 123,7 3 35,9 65, ,8 119,7 4 38,6 70, ,4 128,7 1 33,7 71, ,6 2 39,9 82, ,1 118,4 3 37,0 78, ,6 109,8 4 41,8 88, ,8 124,0 1 30,0 63, ,0 2 38,9 82, ,3 129,7 3 36,1 76, ,7 120,3 4 40,2 84, ,8 134,0 1 33,9 66, ,5 2 39,1 77, ,1 115,7 3 36,9 72, ,3 108,9 4 40,8 80, ,2 120,8 1 30,0 59, ,0 2 38,0 74, ,2 126,9 3 36,0 70, ,3 120,0 4 39,4 77, ,6 131,5 % kg/100 kg n.s. or % t/ulture room of 240 m 2 ulture room surfae % 37,2 67, ,72 35,4 64, ,04 95,2 38,1 67, ,63 36,3 64, ,33 95,3 37,7 67, ,18 35,9 64, ,69 95,2 kg/100 kg n.s. or % t/ulture room of 240 m 2 ulture room surfae % 36,3 66, ,88 100,2 37,2 65, ,98 99,8 36,8 66, , ,0 62, ,8 * * * * * * * * 2 38,6 75, ,6 121,0 * * * * * * * * 3 36,5 71, ,8 114,2 * * * * * * * * 4 40,1 79, ,4 125,8 * * * * * * * * The highest produtions were obtained where the fators there were ombined as a 2 b %, a 2 b %, followed by the ombinations a 2 b % and a 1 b %. We an see that by applying Nemasys M and Dimilin at the same time ( 4 ) we obtain maximum produtions, this being followed by applying Nemasys M ( 2 ) and then Dimilin ( 3 ). The average value of the experiment (a 3 -Mx) had produtions of 40.1% ( 4 -Nemasys M + Dimilin), of 38.6 % ( 2 -Nemasys M) and of 36.5 % ( 3 - Dimilin). In the same table there are presented total produtions obtained under the impat of fator A, observing that by using retangular reipients the prodution inreased with 0.9% (a 2 ). Total prodution ( ) was of in a 1 (PE bags), meaning 100.2% than a 3 (Mx), and in a 2 (retangular reipients), than a 3 (Mx). The prodution differenes are not signifiant (± 0.2%) than a 3 (Mx), whih shows that both types of reipients an be used in ulture aording to farmers possibilities. At the same time, we an se the impat of overing substrate mixture reipe b 1 (additive peat) and b 2 (farm soil 50% + blak peat 50%). By interating both graduations of fator A (a 1 and a 2 ), prodution effiieny is differentiated only under the impat of fator B (b 1 and b 2 ). In both reipient types (a 1 - PE bags and a 2 retangular reipients) the produtions obtained under the impat of fator b 2 are almost the same, of 95.2 % respetively 95.3 % than b 1. The average value of the experiment under the impat of b 2 (farm soil 50% + blak peat 50%) had a differene of 4.8 % than b 1 (additive peat), and the prodution effiieny was of 1.8 kg/100 kg n.s. (1.8%). The prodution differene per total surfae of ulture room 240 m 2, the value is kg mushrooms (4.8 %). Statistial alulation indiates a favourable impat of b 1 upon mushroom prodution, in both reipient types. In table 5 there are presented the prodution differenes signifianes, based on statisti alulation, obtained under the impat of fators interdependene. 188

6 ,880 Produţia medie realizată/an alendaristi pentru fatorul B (Kg/100 kg s.n.. sau %) Produţia medie realizată/an alendaristi pentru fatorul B (t/ameră de ultură de 240 mp) Produţia medie realizată/an alendaristi pentru fatorul A (%) Produţia medie realizată/an alendaristi pentru fatorul A (kg/mp suprafaţă ameră de ultură) 276, , , ,2 100,2 99,8 99,8 275,6 275,4 275, ,853 64,570 67, ,980 64,399 64, , , ,2 35,4 38,1 36,3 37,7 37,723 35,9 274, , ,2 0 b1- reţeta I b2 reţeta II b1- reţeta I b2 reţeta II b1- reţeta I b2 reţeta II a1 Sai din folie PE a 2 - Reipienţi paralelipipedii a3 Media experienţei (Mx) 274,0 Fig.3. Synthesis of the experimental results onsidering Agarius bisporus prodution, by improving some tehnologial links onerning the over mixture and phyto-sanitary protetion Table 5 Unilateral impat of fators interations upon Agarius bisporus prodution by using different ulture reipients and phyto-pharmaeutial produts for ontrolling nematodes and insets in the ulture loal Variant Average prodution Relative prodution Differene (kg/100 kg n.s.) (%) (±kg/100 kg n.s.) Signifiane Unilateral impat of reipients upon mushrooms prodution a2-a a3-a a3-a DL 5% = 3.82 DL 1% = 5.79 DL 0.1%= Unilateral impat of over substrate mixture reipe upon mushrooms prodution b2-b DL 5% = 3.60 DL 1% = 4.96 DL 0.1% = Unilateral impat of pests ontrol produts upon mushrooms prodution *** *** *** DL 5% = 2.49 DL 1% = 3.37 DL 0.1% = The impat of interation between the same reipient and different over substrate mixture reipes upon mushrooms prodution a1b2- a1b a2b2- a2b a3b2- a3b DL 5% = 5.09 DL 1% = 7.01 DL 0.1% = The impat of interation between the same reipient and different pests ontrol produts upon mushrooms prodution a12- a ** a13- a * 189

7 a14- a *** a13- a a14- a a14- a a22- a *** a23- a * a24- a *** a23- a a24- a a24- a * DL 5% = 3.52 DL 1% = 4.77 DL 0.1% = The impat of interation between the same over substrate mixture reipe and different pests ontrol produts upon mushrooms prodution b12- b *** b13- b * b14- b *** b13- b b14- b b14- b ** b22- b *** b23- b *** b24- b *** b23- b b24- b b24- b ** DL 5% = 3.52 DL 1% = 4.77 DL 0.1% = The impat of interation between different over substrate mixture reipe and the same pests ontrol produts upon mushrooms prodution b21- b b22- b b23- b b24- b b22- b ** DL 5% = 4.38 DL 1% = 5.99 DL 0.1% = The impat of interation between the same reipient and the same over substrate mixture reipe and different pests ontrol produts upon mushrooms prodution a1b12- a1b a1b13- a1b a1b14- a1b * a1b13- a1b a1b14- a1b a1b14- a1b a2b22- a2b ** a2b23- a2b * a2b24- a2b *** a2b23- a2b a2b24- a2b a2b24- a2b DL 5% = 4.98 DL 1% = 6.74 DL 0.1% = The impat of interation between the same reipient and different over substrate mixture reipe and the same pests ontrol produt upon mushrooms prodution a1b21- a1b a2b22- a2b a3b23- a3b DL 5% = 6.19 DL 1% = 8.48 DL 0.1% = 11.56

8 Out of the unilateral analyse of experimental fators from points 1, 2 and 3 (table 5) it results that: - there is no signifiane of prodution differenes between a 2 (retangular reipients) and a 1 (PE bags), whih shows that the produtions obtained are not statistial assured (not signifiant), and that both types of reipients an be used for mushrooms ulture (point 1); - the signifiane of prodution differenes between b 2 (farm soil 50% + blak peat 50%) and b 1 (additive peat) is distint signifiant negative, the obtained produtions being statistially overed, at the same time showing a superior potential in b 1 (point 2); - the signifiane of prodution differenes from point 3 (Unilateral impat of pests ontrol produts upon mushrooms prodution), between the produtions obtained under the impat of pests ontrol produts and those obtained in the ontrol variant (no treatments), are very signifiant positive, the produtions being statistially assured and superior with 14.2 % up to 25.8 %. - there stand out the produtions obtained in 4 (Nemasys M + Dimilin); Out of the analyse of fators interations from points 4-9 we see that, aording to bi or trifatorial ombinations, some produtions differenes are signifiant and some not, showing the more or less impat of some experimental fators. Conlusions and Reommendations 1. Making a produtive ativity in a mushroom farm aims to many aspets of its equipment with advaned mahinery and automation and omputerization of prodution proess tehnology and organization proess flow for mushrooms ultivation in a ulture room in terms of ahieving a useful prodution areas greatest possible through the full exploitation of its volume. 2. Setting the ulture nutritive substrate (ompost inubated in stage III) in different types of reipients - PE bags (a 1 ) and retangular reipients (a 2 ), determined different produtions, the differene being not signifiant under the impat of over substrate mixture reipe: 37.2 % for a 1 b 1 and 35.4 % for a 1 b 2, meaning 1.8 %, and 38.1 % for a 2 b 1 and 36.3% for a 2 b 2, the differene being by hane the same; 3. The average prodution obtained in fator A is 36.3% in a 1 PE bags and 37.2% in a 2 retangular reipients, the produtions not being statistially assured beause there is no signifiane of the prodution differene. 4. Total prodution obtained in a ulture room of 240 m 2 in a ulture yle of 46 days, in ase of using retangular reipients (a 2 ) is t, with 0.4 % lower (99.8 %) than the one obtained from mushrooms ultivated in PE bags (a 1 ), whih is of t (100.2 % than a 3 Mx t %). 5. Produtions obtained under the impat of fator A(a 1 PE bags and a 2 retangular reipients) were not statistially assured, prodution differenes being not signifiant, so that both types of reipients an be used in ulture, having their advantages and disadvantages, speifying the hoie of either being neither part of the analysis. 6. We an notie the prodution in b 1 (additive peat), effiieny of de 37.7 %, ompared with b 2 (farm soil 50% + blak peat 50%), 35.9% effiieny, the prodution being statistially assured with a distint negative signifiane for b 2 -b 1. In onlusion, we reommend additive peat to be used as over substrate for Champignon mushrooms; 7. Pests ontrol produts for ontrolling nematodes and insets in the ulture room are differentiated by their impat upon the produtions obtained in all fators interation ombinations in omparison with 1 ontrol (no treatment). 8. There stand out the produtions obtained in 4 (Nemasys M + Dimilin) of 40.1kg/100 kg n.s., followed by treatment with Nemasys M ( 2 ) with 38.6 kg/100 kg n.s., Dimilin ( 4 ) with 36.5kg/100 kg n.s. being on the penultimate plae, so that it is not reommended to be used alone for treatments, the prodution being under the one where the produt was ombined with Nemasys M. Bibliography 1. Tudor Ioana 2002 Cultura şi proteţia iuperilor omestibile. Ed. Ştiinţelor Agriole. Buureşti 2. Mateesu N. şi ol Cultivarea iuperilor Agarius. Ed. Rentrop & Straton. România. 3. Beheresu Alexandra. Horgoş A.. Popa D.. Ţâru O - Study upon the impat of overing layer s omposition and height upon the produtive potential of some Agarius bisporus mushrooms. Analele Universităţii din Craiova. vol. XV (XLXI). Editura Universitaria Horgoş A.. Beheresu Alexandra. Popa D.. Ţâru O. - Phases of the tehnologial modernoyed ulture flux. fators with high impat upon Agarius bisporus prodution. ultivated in bizonal industrial prodution system. Journal of Hortiulture. Forestry and Biotehnology. Vol. XIV

Camber Variability in Prestressed Concrete Bridge Beams

Camber Variability in Prestressed Concrete Bridge Beams CONCRETE BRIDGE TECHNOLOGY Camber Variability in Prestressed Conrete Bridge Beams by Dr. Maher Tadros, econstrut Beams ast with extra amber in storage yard at Conrete Tehnology Corporation; amber shown

More information

Effect of Variation of Fuel Composition on Gas Turbine Off-Design Performance

Effect of Variation of Fuel Composition on Gas Turbine Off-Design Performance Applied Mehanis and Materials Submitted: 2014-08-28 ISSN: 1662-7482, Vol. 666, pp 194-198 Aepted: 2014-08-28 doi:10.4028/www.sientifi.net/amm.666.194 Online: 2014-10-20 2014 Trans Teh Publiations, Switzerland

More information

Horgoş A. 1*, Becherescu Alexandra 1, Popa D. 1, Negrea C. 1. Volume 15(2), , 2011 JOURNAL of Horticulture, Forestry and Biotechnology

Horgoş A. 1*, Becherescu Alexandra 1, Popa D. 1, Negrea C. 1. Volume 15(2), , 2011 JOURNAL of Horticulture, Forestry and Biotechnology Volume 15(2), 114-122, 2011 JOURNAL of Horticulture, Forestry and Biotechnology Light intensity in the culture and mycelium reincubation, technological factors with major impact upon the production level

More information

Continuous temperature measurements on the pouring stand for casting moulds

Continuous temperature measurements on the pouring stand for casting moulds ARCHIVES of FOUNDRY ENGINEERING Published quarterly as the organ of the Foundry Commission of the Polish Aademy of Sienes ISSN (897-330) Volume 8 Issue /008 75 80 5/ Continuous temperature measurements

More information

MODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM)

MODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM) MODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM) Wenbo Xu, Pavan Valavala, Mark Mirgon, Sam Crabtree, Lori Kardos,

More information

20 questions on genetically modified foods

20 questions on genetically modified foods Page 1 of 6 Searh All WHO This site only Home About WHO Countries Health topis Publiations Data and statistis Programmes and projets Food Safety Zoonoses Mirobiologial risks Chemial risks Biotehnology

More information

Permanent Link:

Permanent Link: Citation: Boswell, Brian and Chandratilleke, Tilak. 2009. Sustainable Metal Cutting, in TIC-STH ommittee (ed), 2009 IEEE Toronto International Conferene Siene and Tehnology for Humanity, Sep 26 2009. Ryerson

More information

Finite Element Modeling of Pre-Stressed Hollow Core Slabs

Finite Element Modeling of Pre-Stressed Hollow Core Slabs Current Siene International Volume : 04 Issue : 04 Ot.-De. 2015 Pages :596-603 Finite Element Modeling of Pre-Stressed Hollow Core Slabs 1 Ali N. Deeb, 2 M. Abou Zeid Tarkhan and 3 E. M. El-Tehewy 1 Syrian

More information

Thermodynamic Analysis of Combined Cycle Power Plant

Thermodynamic Analysis of Combined Cycle Power Plant Thermodynami Analysis of Combined Cyle Power Plant A.K.Tiwari 1, Mohd Islam 2, M.N.Khan 3 1 Greater.Noida.Institute of Tehnology, Greater Noida, India. 2 Jamia Millia Islamia,New Delhi, India. 3 Krishna

More information

Page 1 of 6 Searh All WHO This site only Home About WHO Countries Health topis Publiations Data and statistis Programmes and projets Food Safety Zoonoses Mirobiologial risks Chemial risks Biotehnology

More information

Detection of empty grate regions in firing processes using infrared cameras

Detection of empty grate regions in firing processes using infrared cameras 11 th International Conferene on Quantitative InfraRed Thermography Detetion of empty grate regions in firing proesses using infrared ameras by J. Matthes*, P. Waibel* and H.B. Keller* *Institute for Applied

More information

Energy Saving Opportunities through Heat Recovery from Cement Processing Kilns: A Case Study

Energy Saving Opportunities through Heat Recovery from Cement Processing Kilns: A Case Study Energy Saving Opportunities through Heat Reovery from Cement Proessing Kilns: A Case Study I. I. AL-HINTI a, A. AL-GHANDOOR b, A. AL-NAJI, M. ABU-KHASHABEH, M. JOUDEH, M. AL-HATTAB a Department of Mehanial

More information

Learning about. Chapter 2 Rainforests. 1 Describe the location of the world s tropical rainforests using latitude.

Learning about. Chapter 2 Rainforests. 1 Describe the location of the world s tropical rainforests using latitude. 53 1 Desribe the loation of the world s tropial rainforests using latitude. 2 What perentage of the Earth s surfae is overed by tropial rainforests? 3 Refer to [2.2]: a Whih area of the world has the greatest

More information

SNAP CODE : SOURCE ACTIVITY TITLE: Reheating Furnaces Steel and Iron NOSE CODE:

SNAP CODE : SOURCE ACTIVITY TITLE: Reheating Furnaces Steel and Iron NOSE CODE: i030302 Ativity 030302 SNAP CODE : 030302 SOURCE ACTIVITY TITLE: PROCESSES WITH CONTACT Reheating Furnaes Steel and Iron NOSE CODE: 104.12.03 NFR CODE: 1 A 2 a 1 ACTIVITIES INCLUDED The reheating furnaes

More information

Biological Performance of Potato Tuber Moth on Leaves of Tomatoes

Biological Performance of Potato Tuber Moth on Leaves of Tomatoes iologial Performane of Potato Tuber Moth on Leaves of Tomatoes 1 Ethiopian Institute of Agriultural Researh, P.O. ox 23, Addis Ababa, Ethiopia 2 Faulty of Agriultural, Food and Environmental Quality Sienes,

More information

Experiment Station. Department of Soil and Crop Sciences

Experiment Station. Department of Soil and Crop Sciences Tehnial Bulletin TB06-03 August 2006 Ag riultural Experiment Station College of Agriultural Sienes Department of Soil and Crop Sienes Western Colorado Researh Center Organi Alternatives for Weed Control

More information

Proposal for a new shear design method

Proposal for a new shear design method Chapter 6 Proposal for a new shear design method The behaviour of beams failing in shear has been studied in the previous hapters, with speial attention paid to high-strength onrete beams. Some aspets

More information

STUDY ON THE MECHANICAL PROPERTIES OF THE FLY ASH GEOPOLYMER CONCRETE

STUDY ON THE MECHANICAL PROPERTIES OF THE FLY ASH GEOPOLYMER CONCRETE International Journal of Civil Engineering and Tehnology (IJCIET) Volume 8, Issue 3, Marh 2017, pp. 950 957 Artile ID: IJCIET_08_03_095 Available online at http://www.iaeme.om/ijciet/issues.asp?jtype=ijciet&vtype=8&itype=3

More information

Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load

Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load Civil Engineering Dimension, Vol. 19, No. 1, Marh 017, 9-5 ISSN 1410-950 print / ISSN 1979-570X online DOI: 10.9744/CED.19.1.9-5 Experimental and Theoretial Defletions of Hybrid Composite Sandwih Panel

More information

Tests on Reinforced Concrete Slabs with Pre-stressing and with Transverse Reinforcement under Impact Loading

Tests on Reinforced Concrete Slabs with Pre-stressing and with Transverse Reinforcement under Impact Loading 20th International Conferene on Strutural Mehanis in Reator Tehnology (SMiRT 20) Espoo, Finland, August 9-14, 2009 SMiRT 20-Division 5, Paper 2015 Tests on Reinfored Conrete Slabs with Pre-stressing and

More information

Waste Shell Husks Concrete: Durability, Permeability and Mechanical Properties

Waste Shell Husks Concrete: Durability, Permeability and Mechanical Properties Journal of Building Constrution and Planning Researh, 2013, 1, 61-66 http://dx.doi.org/10.4236/jbpr.2013.13009 Published Online September 2013 (http://www.sirp.org/journal/jbpr) 61 Waste Shell Husks Conrete:

More information

Luis Currais University of La Coruña. Abstract

Luis Currais University of La Coruña. Abstract Potential onflits in the fight against ounterfeit drugs Luis Currais University of La Coruña Berta Rivera University of La Coruña Paolo Rungo University of La Coruña Abstrat This analysis looks at the

More information

Flexibility of Strategy in High-Tech Enterprises

Flexibility of Strategy in High-Tech Enterprises Soure: A. Zakrzewska Bielawska, Flexibility of strategy in high-teh enterprises [w:] M. Zhang (red., Eonomis, Business and Management. International Proeedings of Eonomis Development and Researh Vol. Flexibility

More information

J. A. Avila Institute of Engineering, National University of Mexico (UNAM), Mexico. Abstract. 1 Introduction

J. A. Avila Institute of Engineering, National University of Mexico (UNAM), Mexico. Abstract. 1 Introduction High Performane Strutures and Materials V 99 Prinipal results of the inelasti seismi performane of a 17-story RC building loated in the soft-soil area in Mexio City with normal-strength onrete and with

More information

FINITE ELEMENT MODELLING OF STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH PRESTRESSED CFRP PLATE

FINITE ELEMENT MODELLING OF STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH PRESTRESSED CFRP PLATE FINITE ELEMENT MODELLING OF STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH PRESTRESSED CFRP PLATE H.Y. Omran 1, P. Zangeneh 2, and R. EL-Haha 3 1 PhD student, Department of Civil Engineering, University

More information

Buildup Factors Calculation for a 1-MeV Point Isotropic Source in Iron, Concrete, and. Water. Skyler Butler, Maria Pinilla

Buildup Factors Calculation for a 1-MeV Point Isotropic Source in Iron, Concrete, and. Water. Skyler Butler, Maria Pinilla Buildup Fators Calulation for a 1-MeV Point Isotropi Soure in Iron, Conrete, and Water Skyler Butler, Maria Pinilla Abstrat This experiment alulates the buildup fators for 1-MeV point isotropi soure of

More information

ModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same!

ModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same! ModuSe Seure and effiient IT room solutions Composite Panel Systems Compared Panel Systems are not all the same! When it omes to aommodating ritial IT systems, the first issue to look at is the environment

More information

TEMPERATURE ADAPTIVE CONTROL USING THE ADDITIVE MANUFACTURING FOR INJECTION MOLDING POLYMERIC PRODUCTS

TEMPERATURE ADAPTIVE CONTROL USING THE ADDITIVE MANUFACTURING FOR INJECTION MOLDING POLYMERIC PRODUCTS 5 th International Conferene Advaned Composite Materials Engineering COMAT 2014 16-17 Otober 2014, Braşov, Romania TEMPERATURE ADAPTIVE CONTROL USING THE ADDITIVE MANUFACTURING FOR INJECTION MOLDING POLYMERIC

More information

Study on the productive and qualitative potential of some watermelon hybrids under the impact of biostimulating treatments

Study on the productive and qualitative potential of some watermelon hybrids under the impact of biostimulating treatments Volume 17(1), 81-87, 2013 JOURNAL of Horticulture, Forestry and Biotechnology www.journal-hfb.usab-tm.ro Study on the productive and qualitative potential of some watermelon hybrids under the impact of

More information

DEVELOPMENT AND INVESTIGATION OF A SYMMETRIC INDUCTION HEATING UNIT FOR SPHERICAL SHAPE METAL WARE

DEVELOPMENT AND INVESTIGATION OF A SYMMETRIC INDUCTION HEATING UNIT FOR SPHERICAL SHAPE METAL WARE Journal of Chemial Sergey Tehnology S. Titov, Vitor and Metallurgy, N. Meshheryakov 53, 5, 2018, 1009-1016 DEVELOPMENT AND INVESTIGATION OF A SYMMETRIC INDUCTION HEATING UNIT FOR SPHERICAL SHAPE METAL

More information

Suggested Changes to NZS3101:2006 with Amendments 1 and 2

Suggested Changes to NZS3101:2006 with Amendments 1 and 2 1 Suggested Changes to NZS3101:2006 with Amendments 1 and 2 Rihard Fenwik and Dene Cook Introdution NZS 3101: 2006 Conrete Strutures Standard is a design ode published by Standards New Zealand. Sine the

More information

EXPERIMENTAL INVESTIGATION OF ECCENTRIC REINFORCED CONCRETE BEAM-COLUMN-SLAB CONNECTIONS UNDER EARTHQUAKE LOADING

EXPERIMENTAL INVESTIGATION OF ECCENTRIC REINFORCED CONCRETE BEAM-COLUMN-SLAB CONNECTIONS UNDER EARTHQUAKE LOADING 13 th World Conferene on Earthquake Engineering Vanouver, B.C., Canada August 1-6, 24 Paper No. 215 EXPERIMENTAL INVESTIGATION OF ECCENTRIC REINFORCED CONCRETE BEAM-COLUMN-SLAB CONNECTIONS UNDER EARTHQUAKE

More information

30th Conference on OUR WORLD IN CONCRETE & STRUCTURES: August 2005, Singapore. Article Online Id:

30th Conference on OUR WORLD IN CONCRETE & STRUCTURES: August 2005, Singapore. Article Online Id: EXPERIMENTAL RESEARCH ON JOINTS OF PRESTRESSED CONCRETE BEAM AND COMPOSITE CONCRETE COLUMN WITH CORE OF CONCRETE FILLED STEEL TUBE UNDER LOW-CYCLIC REVERSED LOADING Deng Zhi-heng*, Guangxi University,

More information

Post-Tensioned Two-Way Slab

Post-Tensioned Two-Way Slab The Medial Oie Building Malvern, PA 13 Post-Tensioned Two-Way Slab Introdution The Filigree beam system reates a thin lightweight loor system that leaves plenty o open plenum spae or mehanial and eletrial

More information

Economic Assessment of Intensive Culture

Economic Assessment of Intensive Culture Reprodued from JOURNAL OF FORESTRY, Vol. 76, No. 11, November 1978, by the FOREST SERVICE, U.S. Department of Agriulture, for offiial use. About This File:,. lhis file was reated by sanning the printed

More information

LOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by

LOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by LOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by Firm L. Weaver Engineering Consultant Sun City Center, Florida Firm L. Weaver graduated from Roanoke Coll ege, in Salem, Virginia, with a B.S. degree

More information

WATER USE EFFICIENCY OF IRRIGATED SUGARCANE AS AFFECTED BY ROW SPACING AND VARIETY

WATER USE EFFICIENCY OF IRRIGATED SUGARCANE AS AFFECTED BY ROW SPACING AND VARIETY WATER USE EFFICIENCY OF IRRIGATED SUGARCANE AS AFFECTED BY ROW SPACING AND VARIETY F OLIVIER and A SINGELS South Afrian Sugar Assoiation Experiment Station, P/Bag X02, Mount Edgeombe, 4300, South Afria

More information

EXPERIMENTAL INVESTIGATION ON RECTANGULAR SRC COLUMNS WITH MULTI-SPIRAL CONFINEMENTS

EXPERIMENTAL INVESTIGATION ON RECTANGULAR SRC COLUMNS WITH MULTI-SPIRAL CONFINEMENTS 4th International Conferene on Earthquake Engineering Taipei, Taiwan Otober 12-13, 26 Paper No. 49 EXPERIMENTL INVESTIGTION ON RECTNGULR SRC COLUMNS WITH MULTI-SPIRL CONFINEMENTS C.C. Weng 1, Y.L. Yin

More information

Corrosion of reinforcing steel is widely accepted as the

Corrosion of reinforcing steel is widely accepted as the Strength eterioration of Reinfored Conrete Columns Exposed to Chloride Attak R. Greo, G.C. Marano Abstrat This paper fouses on reinfored onrete olumns load arrying apaity degradation over time due to hloride

More information

No. 20 WORKING PAPER SERIES IN ECONOMICS THE IMPACT OF COMPETITION ON UNILATERAL INCENTIVES TO INNOVATE NADJA TRHAL

No. 20 WORKING PAPER SERIES IN ECONOMICS THE IMPACT OF COMPETITION ON UNILATERAL INCENTIVES TO INNOVATE NADJA TRHAL No. 0 U N I V E R S I T Y O F C O L O G N E WORKING PAPER SERIES IN ECONOMICS THE IMPACT OF COMPETITION ON UNILATERAL INCENTIVES TO INNOVATE NADJA TRHAL Department of Eonomis University of Cologne Albertus-Magnus-Platz

More information

1 INTRODUCTION. Akbar Haghinejad Mahdi Nematzadeh *

1 INTRODUCTION. Akbar Haghinejad Mahdi Nematzadeh * 916 Three-Dimensional Finite Element Analysis of Compressive Behavior of Cirular Steel Tube-Confined Conrete Stub Columns by New Confinement Relationships Abstrat This paper presents a nonlinear analysis

More information

Creation of concrete products reusing melting slag from waste incineration ash

Creation of concrete products reusing melting slag from waste incineration ash Creation of onrete produts reusing melting slag from waste inineration ash Y Hosokawa*, Kitasato University, Japan Y Ohta, Kitasato University, Japan M Komura, ILB Co Ltd, Japan K Sugawara, ILB Co Ltd,

More information

Mechanical Properties of High-Strength Concrete Manish Kumar 1, A.M. ASCE; Zhaoyu Ma 2 ; Moses Matovu 2

Mechanical Properties of High-Strength Concrete Manish Kumar 1, A.M. ASCE; Zhaoyu Ma 2 ; Moses Matovu 2 1.1 Introdution Mehanial Properties of High-Strength Conrete Manish Kumar 1, A.M. ASCE; Zhaoyu Ma 2 ; Moses Matovu 2 Mehanial properties of High-Strength Conrete (HSC) an be divided in two groups as shortterm

More information

Research and application of the analytical hierarchy model based on sports industry resource optimization and structure layout strategy

Research and application of the analytical hierarchy model based on sports industry resource optimization and structure layout strategy vailable online www.jopr.om Journal of Chemial and Pharmaeutial Researh, 04, 6(6):890-897 Researh rtile ISSN : 0975-784 CODEN(US) : JCPRC5 Researh and appliation of the analytial hierarhy model based on

More information

Thermal Shock Behaviour of Magnesia Hercynite-Spinel Composite Refractories

Thermal Shock Behaviour of Magnesia Hercynite-Spinel Composite Refractories Journal of Multidisiplinary Engineering Siene and Tehnology (JMEST) Thermal Shok Behaviour of Magnesia Herynite-Spinel Composite Refratories Tuba (Aksoy) Bahtlı* Nemettin Erbakan University, Faulty of

More information

Keywords: Greenhouse; Thermal performance; Water pipes heating; Infrared radiation; Energy balance; Heating efficiency

Keywords: Greenhouse; Thermal performance; Water pipes heating; Infrared radiation; Energy balance; Heating efficiency International Symposium Greensys 7 "High Tehnology for Greenhouse system Management" Naples Italy, 4-6 Otober 7 Investigation of the Potential of Infrared-radiation (IR) to Redue Energy Consumption in

More information

EXPERIMENTAL STUDY ON LINK SLAB FOR HIGHWAY GIRDERS

EXPERIMENTAL STUDY ON LINK SLAB FOR HIGHWAY GIRDERS การประช มว ชาการว ศวกรรมโยธาแห งชาต คร งท ๑๐ ชลบ ร ๒ ๔ พฤษภาคม ๒๕๔๘ EXPERIMENTAL STUDY ON LINK SLAB FOR HIGHWAY GIRDERS Tayagorn Charuhaimontri 1 Ekasit Limsuwan 2 1 Ph.D.Student, Department of Civil Engineering,

More information

Creep Analysis of Aluminum Alloy Disk Experiment for High Speed Energy Storage Flywheel

Creep Analysis of Aluminum Alloy Disk Experiment for High Speed Energy Storage Flywheel Creep Analysis of Aluminum Alloy Disk Experiment for High Speed Energy Storage Flywheel YangXU, HanYU, ZupeiSHEN Tsinghua Univ. CHINA Abstrat: In order to ahieve higher speed and higher energy density,

More information

Thermal Analysis of Open-Cycle Regenerator Gas-Turbine Power-Plant

Thermal Analysis of Open-Cycle Regenerator Gas-Turbine Power-Plant Thermal Analysis of Open-Cyle Regenerator Gas-Turbine Power-Plant M. M. Rahman, Thamir K. Ibrahim, M. Y. Taib, M. M. Noor, K. Kadirgama and Rosli A. Bakar Abstrat Regenerative gas turbine engine yle is

More information

Limit states for the damage assessment of bridges supported on LRB bearings

Limit states for the damage assessment of bridges supported on LRB bearings Journal of Physis: Conferene Series PAPER OPEN ACCESS Limit states for the damage assessment of bridges supported on LRB bearings To ite this artile: M Jara et al 05 J. Phys.: Conf. Ser. 68 0046 View the

More information

PROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS

PROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS Institute of Industrial Siene, University of Tokyo Bulletin of ERS, No. 37 PROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS Angel SAN BARTOLOME 1, Daniel QUIUN 1 and Paola MAYORCA

More information

The influence of elevated magnetic fields on the texture formation of melt-processed Bi-2212

The influence of elevated magnetic fields on the texture formation of melt-processed Bi-2212 Ž. Physia C 336 2000 192 198 www.elsevier.nlrloaterphys The influene of elevated magneti fields on the texture formation of melt-proessed Bi-2212 E. Cehetti, P.J. Ferreira ), J.B. Vander Sande Department

More information

Review Drinking Water Contamination and Its Effects on Human Health

Review Drinking Water Contamination and Its Effects on Human Health International Journal of Researh (IJR) e-issn: 248-6848, p- ISSN: 248-795X Volume 2, Issue 12, Deember 2015 Available at http://internationaljournalofresearh.org Review Drinking Water Contamination and

More information

Prediction of Temperature and Aging Effects on the Properties of Concrete

Prediction of Temperature and Aging Effects on the Properties of Concrete Predition of Temperature and Aging Effets on the Properties of Conrete Jin-Keun Kim 1* and Inyeop Chu 1 1 KAIST, Republi of Korea * E-mail: kimjinkeun@kaist.a.kr ABSTRACT For the sustainable onrete strutures,

More information

~ Early Life

~ Early Life Measurements and reporting systems are established Suessful validation of the deployment triggers the launh of Early Life Support (ELS). 6.0 Deploy & Verify - Q)... E Q) t1 Ol Change.r::: t1 0 t1 (jj Ol

More information

International Journal of Research (IJR) e-issn: , p- ISSN: X Volume 3, Issue 01, January 2016

International Journal of Research (IJR) e-issn: , p- ISSN: X Volume 3, Issue 01, January 2016 International Journal of Researh (IJR) Available at http://internationaljournalofresearh.org Study of failure probability by deterministi method reliability-strength applied to metal ables intended for

More information

Minimization of water and chemical usage in the cleaning in place process of a milk pasteurization plant

Minimization of water and chemical usage in the cleaning in place process of a milk pasteurization plant Songklanakarin J. Si. Tehnol. 33 (4), 431-440, Jul. - Aug. 2011 http://www.sjst.psu.a.th Original Artile Minimization of water and hemial usage in the leaning in plae proess of a milk pasteurization plant

More information

TRANSLATION OF MEASURED VEHICULAR WEIGHTS INTO DESIGN LOADS TO BE USED FOR BRIDGE ENGINEERING

TRANSLATION OF MEASURED VEHICULAR WEIGHTS INTO DESIGN LOADS TO BE USED FOR BRIDGE ENGINEERING 7th International Symposium on Heavy Vehile Weights & Dimensions Delft. The Netherlands. June 16-2.22 TRANSLATION OF MEASURED VEHICULAR WEIGHTS INTO DESIGN LOADS TO BE USED FOR BRIDGE ENGINEERING ABSTRACT

More information

Comparison Study of Connector and Tubing Blow-Off Line

Comparison Study of Connector and Tubing Blow-Off Line PROCEEDINGS Comparison Study of Connetor and Tubing Blow-Off Line Pressures Jerry D. Leaf, Charles Dyson, Robert Emerson UCLA Medial Center, Department of Surgery, Division of Thorai Surgery Abstrat The

More information

Coordinating strategy of supply chain contract based on price discount and quantity buyback

Coordinating strategy of supply chain contract based on price discount and quantity buyback ISSN 1816-6075 (Print), 1818-0523 (Online) Journal of System and Management Sienes Vol. 1 (2011) No. 4, pp. 19-29 Coordinating strategy of supply hain ontrat based on prie disount and quantity buybak Ping

More information

Response of Steel-plate Concrete (SC) Wall Piers to Combined In-plane and Out-of-plane Seismic Loadings

Response of Steel-plate Concrete (SC) Wall Piers to Combined In-plane and Out-of-plane Seismic Loadings ISSN 1520-295X Response of Steel-plate Conrete (SC) Wall Piers to Combined In-plane and Out-of-plane Seismi Loadings by Brian Terranova, Andrew S. Whittaker, Siamak Epakahi and Nebojsa Orbovi Tehnial Report

More information

Feed-Time Distribution in Pneumatic Feeding of Softwood Seedlings

Feed-Time Distribution in Pneumatic Feeding of Softwood Seedlings Journal of Forest Engineering 49 FeedTime Distribution in Pneumati Feeding of Softwood Seedlings Ulf Hallonborg The Forestry Researh Institute of Sweden Uppsala, Sweden ABSTRACT Long seedling feed times

More information

EITF ABSTRACTS. To take advantage of new capabilities in electronic commerce and advances in computer

EITF ABSTRACTS. To take advantage of new capabilities in electronic commerce and advances in computer EITF ABSTRACTS Issue No. 97-13 Title: Aounting for Costs Inurred in Connetion with a Consulting Contrat or an Internal Projet That Combines Business Proess Reengineering and Information Tehnology Transformation

More information

NONLINEAR CYCLIC TRUSS MODEL FOR SHEAR-CRITICAL REINFORCED CONCRETE COLUMNS

NONLINEAR CYCLIC TRUSS MODEL FOR SHEAR-CRITICAL REINFORCED CONCRETE COLUMNS NONLINEAR CYCLIC TRUSS MODEL FOR SHEAR-CRITICAL REINFORCED CONCRETE COLUMNS S.C. Girgin 1, Y. Lu 2 and M. Panagiotou 3 1 Researh Assistant, Civil Eng. Department, Dokuz Eylul University, Izmir 2 Graduate

More information

Department of Economics. Strategic Choice of Network Externality

Department of Economics. Strategic Choice of Network Externality Department of Eonomis Working Paper Series Strategi Choie of Network Externality Yuanzhu u & Sougata Poddar 05/03 Strategi Choie of Network Externality Yuanzhu u Sougata Poddar China Eonomis and Management

More information

CREEP BEHAVIOUR OF GEOMETRICALLY NONLINEAR SOFT CORE SANDWICH PANELS

CREEP BEHAVIOUR OF GEOMETRICALLY NONLINEAR SOFT CORE SANDWICH PANELS 20 th International Conferene on Composite Materials CRP BHAVIOUR OF GOMTRICALLY NONLINAR SOFT COR SANDWICH PANLS hab Hamed 1 and Yeoshua Frostig 2 1 Centre for Infrastruture ngineering and Safety, Shool

More information

Large System Multi-objective Model of Optimal Allocation for Water Resources in Jiansanjiang Branch Bureau

Large System Multi-objective Model of Optimal Allocation for Water Resources in Jiansanjiang Branch Bureau Large System Multi-obetive Model of Optimal Alloation for Water Resoures in Jiansaniang Branh Bureau Ping Lv, Dong Liu, Shool of Water Conservany & Civil Engineering, Northeast Agriultural University,

More information

Energy Savings from Increased Preventive Maintenance on Indiana Highways

Energy Savings from Increased Preventive Maintenance on Indiana Highways TRANSPORTATION RESEARCH RECORD 112 27 Energy Savings from Inreased Preventive Maintenane on Indiana Highways EssAM A. SHARAF AND KuMARES C. SINHA In this paper are desribed the development of trade-off

More information

Flat slabs with spherical voids. Part I: Prescriptions for flexural and shear design

Flat slabs with spherical voids. Part I: Prescriptions for flexural and shear design Ata Tehnia Napoensis: Civil Engineering & Arhiteture Vol. 56, No. 1 (2013) Journal homepage: http://onstrutii.utluj.ro/atacivileng Flat slabs with spherial voids. Part I: Presriptions for fleural and shear

More information

SEISMIC RETROFIT USING CONTINUOUS FIBER SHEETS

SEISMIC RETROFIT USING CONTINUOUS FIBER SHEETS SEISMIC RETROFIT USING CONTINUOUS FIER SHEETS Yasuhiro MATSUZAKI 1, Katsuhiko NAKANO, Shigeru FUJII 3 And Hiroshi FUKUYAMA 4 SUMMARY The researh on seismi retrofit of RC members using ontinuous fiber sheets

More information

Experimental Study of a New Type Buckling-Restrained Brace. Abstract

Experimental Study of a New Type Buckling-Restrained Brace. Abstract Experimental Study of a New Type Bukling-Restrained Brae S. G. CHENG, X.X. KONG AND K.H. LUO Institute of Earthquake Engineering, China Aademy of Building Researh Abstrat The steel ore and unbonding agent

More information

Systems & Services Certification SGS 53,000, 1000

Systems & Services Certification SGS 53,000, 1000 CSR July 28, 2009 SGS Systems & Servies Certifiation SGS SGS SGS 1878 SGS 140 53,000, 1000 - Europe, Middle East & Afria: 24 400 employees - Amerias: 12 100 employees - Asia/Paifi: 16 500 employees SGS,

More information

Numerical Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwich Structures

Numerical Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwich Structures Journal of Metals, Materials and Minerals, Vol.18 No.2 pp.111-115, 2008 Numerial Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwih Strutures Jörg FELDHUSEN 1, Sirihai

More information

KE double wall transport anchors

KE double wall transport anchors for better solutions... KE double wall transport anhors The safe transport anhor for double walls KE Ttransport anhors - Transport double walls seurely www.h-bau.de Contat Oslo Helsinki Mosow London Warsaw

More information

Full Scale Load Testing of Selected RG4 Supporting Beam

Full Scale Load Testing of Selected RG4 Supporting Beam Full Sale Load Testing of Seleted RG4 Supporting Beam BPEX PROJECT Maptaphut, Rayong Final Report by Civil and Environmental Engineering Design and Consulting Servie Mahidol University Applied and Tehnologial

More information

Fatigue and Creep-Fatigue Testing of Bellows at Elevated Temperature

Fatigue and Creep-Fatigue Testing of Bellows at Elevated Temperature S. Yamamoto K. Isobe S. Ohte Mehanial Engineering Laboratory, Researh and Development Center. N. Tanaka S. Ozaki Nulear Engineering Laboratory, Nulear Energy Group. K. Kimura Advaned Reator Engineering

More information

Simulation of Transient Thermal Behaviors of the System Consisting of Aluminum Plate and Phase Change Material

Simulation of Transient Thermal Behaviors of the System Consisting of Aluminum Plate and Phase Change Material Journal of Materials Sienes and Appliations 2017; 3(4): 53-57 http://www.aasit.org/journal/jmsa ISSN: 2381-0998 (Print); ISSN: 2381-1005 (Online) Simulation of Transient Thermal Behaviors of the System

More information

The influence of pallets on the behaviour and design of steel drive-in storage racks - Part II Design

The influence of pallets on the behaviour and design of steel drive-in storage racks - Part II Design University of Wollongong Researh Online Faulty of Engineering and Information Sienes - Papers: Part A Faulty of Engineering and Information Sienes 2013 The influene of pallets on the behaviour and design

More information

Project Summary Determination of Capillary Pressure-Saturation Curves Involving TCE, Water and Air for a Sand and a Sandy Clay Loam

Project Summary Determination of Capillary Pressure-Saturation Curves Involving TCE, Water and Air for a Sand and a Sandy Clay Loam United States Environmental Protetion Ageny Researh and Development Robert S. Kerr Environmental Researh Laboratory Ada, OK 70 EPA/00/SR-9/005 Marh 99 Projet Summary Determination of Capillary Pressure-Saturation

More information

7001 Diamond Snap-Form ICF Code Considerations With the multitude of lightweight onrete forming systems in the onstrution market, building offiials are raising questions about ode ompliane and/or ode evaluation

More information

Example 24.3 Flexural Strength of Prestressed Member Using Approximate Value for f ps

Example 24.3 Flexural Strength of Prestressed Member Using Approximate Value for f ps Example 24.3 Flexural Strength of Prestressed Member Using Approximate Value for f ps Calulate the nominal moment strength of the prestressed member shown. f = 5000 psi f pu = 270,000 psi (low-relaxation

More information

A Novel and More Efficient Way to Grind Punching Tools

A Novel and More Efficient Way to Grind Punching Tools A Novel and More Effiient Way to Grind Punhing Tools P. Krajnik 1,, R. Drazumeri, J. A. Badger 3, C. M. Niolesu 1, J. Kopa 1 KTH Royal Institute of Tehnology, Prodution Engineering, Stokholm, Seden University

More information

Designing a Genetic Algorithm to Solve an Integrated Model in Supply Chain Management Using Fuzzy Goal Programming Approach

Designing a Genetic Algorithm to Solve an Integrated Model in Supply Chain Management Using Fuzzy Goal Programming Approach Designing a Geneti Algorithm to Solve an Integrated Model in Supply Chain Management Using Fuzzy Goal Programming Approah M. Rostami N. K.i *, J. Razmi, and F. Jolai Department of Industrial Engineering,

More information

Strategic Outsourcing with Technology Transfer under Cournot Competition

Strategic Outsourcing with Technology Transfer under Cournot Competition Disussion Paper ERU/4 4 February, 4 Strategi Outsouring with Tehnology Transfer under Cournot Competition Tarun Kabiraj Indian Statistial Institute and Uday Bhanu Sinha ** Delhi Shool of Eonomis February,

More information

ESTIMATION OF FRACTURE TOUGHNESS OF THE OXIDE SCALES. Jozef HRABOVSKÝ, Petr LOŠÁK, Jaroslav HORSKÝ

ESTIMATION OF FRACTURE TOUGHNESS OF THE OXIDE SCALES. Jozef HRABOVSKÝ, Petr LOŠÁK, Jaroslav HORSKÝ ESTIMATION OF FRACTURE TOUGHNESS OF THE OXIDE SCALES Jozef HRABOVSKÝ, Petr LOŠÁK, Jaroslav HORSKÝ Heat Transfer and Fluid Flow Laboratory, Faulty of Mehanial Engineering, VUT Brno, Tehniká 2, 616 69 Brno,

More information

Production Cost Optimization Model Based on CODP in Mass Customization

Production Cost Optimization Model Based on CODP in Mass Customization IJCSI International Journal of Computer Siene Issues, Vol. 0, Issue, No, January 03 www.ijcsi.org 60 Prodution Cost Optimization Model Based on CODP in Mass Customization Yanhong Qin, Yuanfang Geng Shool

More information

Yield of spring barley mixtures as a function of varietal and environmental characteristics

Yield of spring barley mixtures as a function of varietal and environmental characteristics Yield of spring barley mitures as a funtion of varietal and environmental harateristis Lars Kiær 1, Ib Skovgaard 2 and Hanne Østergård 1 1 Biosystems Department, Risø National Laboratory DTU, 4000 Roskilde,

More information

Cofra. CDC compaction. Cofra. Building worldwide on our strength

Cofra. CDC compaction. Cofra. Building worldwide on our strength C Building worldwide on our strength Due to the inreased sale of dredging equipment, dredged material is often deposited on sites at a muh greater rate than was the ase 10 years ago. As a result, there

More information

2017 Soybean Cover Crop Trial

2017 Soybean Cover Crop Trial 2017 Soybean Cover Crop Trial Dr. Heather Darby, UVM Extension Agronomist Sara Ziegler, Eria Cummings, Abha Gupta, and Lindsey Ruhl UVM Extension Crops and Soils Tehniians (802) 524-6501 Visit us on the

More information

System Dynamics Optimisation Approach to Irrigation Demand Management

System Dynamics Optimisation Approach to Irrigation Demand Management Bureau of Meteorology From the SeletedWorks of Amgad Elmahdi 2005 System Dynamis Optimisation Approah to Irrigation Demand Management Amgad ELMAHDI Hetor Malano Teri Ethells Shahbaz khan Available at:

More information

building, and these researh results indiated that it is the double orner reession modifiation that redues RMS of aross-wind aerodynami fore by 40%, al

building, and these researh results indiated that it is the double orner reession modifiation that redues RMS of aross-wind aerodynami fore by 40%, al The Seventh International Colloquium on Bluff Body Aerodynamis and Appliations (BBAA7) Shanghai, China; September 2-6, 2012 Effets of orner reession modifiation on aerodynami oeffiients of square tall

More information

Shear Transfer Strength Evaluation for Ultra-High Performance Fiber Reinforced Concrete

Shear Transfer Strength Evaluation for Ultra-High Performance Fiber Reinforced Concrete Shear Transfer Strength Evaluation for Ultra-High Performane Fiber Reinfored Conrete Ji-hyung Lee, and Sung-gul Hong Abstrat Ultra High Performane Fiber Reinfored Conrete (UHPFRC) is distinguished from

More information

SDI-C-2011 Standard for Composite Steel Floor Deck-Slabs 30 November General

SDI-C-2011 Standard for Composite Steel Floor Deck-Slabs 30 November General 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1. General SDI-C-2011 Standard for Composite Steel Floor Dek-Slabs 30 November

More information

Labor Requirements by Country and Good

Labor Requirements by Country and Good Spring 2003 Eon 455 Answers to roblem Set 2 Harvey Lapan 1. Consider the Riardian model, with two ountries, the U.S. and the U.K. Eah ountry has a total labor supply of 2,000 worker hours, and labor requirements

More information

Performance analysis and improvement for CC-OTEC system

Performance analysis and improvement for CC-OTEC system Journal o Mehanial Siene and Tehnology 22 (2008) 1977~1983 Journal o Mehanial Siene and Tehnology www.springerlink.om/ontent/1738-494x DOI 10.1007/s12206-008-0742-9 Perormane analysis and improvement or

More information

Generating Light from Stoves using a Thermoelectric Generator

Generating Light from Stoves using a Thermoelectric Generator Generating Light from Stoves using a Thermoeletri Generator Dan Mastbergen, dmast@engr.olostate.edu Dr. Bryan Willson, Bryan.Willson@olostate.edu Engines and Energy Conversion Laboratory Department of

More information

BEHAVIOR OF PRESTRESSED SIMPLE AND CONTINUOUS PARTIALLY COMPOSITE STEEL-CONCRETE BEAMS

BEHAVIOR OF PRESTRESSED SIMPLE AND CONTINUOUS PARTIALLY COMPOSITE STEEL-CONCRETE BEAMS ACTA TECHNICA CORVINIENSIS Bulletin of Engineering Tome IX [2016], Fasiule 3 [July September] ISSN: 2067 3809 1.Mohamed A. A. EL-SHAER, 2. Shymaa M. MUKHTAR BEHAVIOR OF PRESTRESSED SIMPLE AND CONTINUOUS

More information

Pressure Vessels and Heat Exchangers

Pressure Vessels and Heat Exchangers With Pressure Vessel and Heat Exhanger expertise in design evaluation, development of tehnial purhase speifiations, rerating, and repair analysis and high temperature vessel design, you d think we an do

More information

GROUND WATER/SURFACE WATER INTERACTIONS AWRA SUMMER SPECULLTP CONF~NCR CZ-I PDG- ANALYSIS OF INFILTRATED STREAM WATER TO A PUMPING WELL

GROUND WATER/SURFACE WATER INTERACTIONS AWRA SUMMER SPECULLTP CONF~NCR CZ-I PDG- ANALYSIS OF INFILTRATED STREAM WATER TO A PUMPING WELL JULY 1-3 GROUND WATER/SURFACE WATER NTERACTONS AWRA SUMMER SPECULLTP CONF~NCR 22 32 CZ- PDG- ANALYSS OF NFLTRATED STREAM WATER TO A PUMPNG WELL Xunhong Chen' and Xi Chen' ABSTRACT: Pumping of groundwater

More information

Development of Eco-Friendly Deconstruction Technologies for Recycling Construction Waste

Development of Eco-Friendly Deconstruction Technologies for Recycling Construction Waste Journal of Environmental Protetion, 214, 5, 647-661 Published Online May 214 in SiRes. http://www.sirp.org/journal/jep http://dx.doi.org/1.4236/jep.214.5766 Development of Eo-Friendly Deonstrution Tehnologies

More information