seamless, double walled, made of , option: Hastelloy and other materials Heating jacket (option)
|
|
|
- Nancy Watts
- 6 years ago
- Views:
Transcription
1 General Data Series 6N Nominal Size DN / -500 / 6 20 Nominal Pressure PN / ANSI / Class - Characteristics equal percentage or Rangeability 40:1 guide stem guided, option: double guiding (retrofit able) Seat leakage metal sealing: IEC leakage class IV (0,01% kvs- value); option: leakage class V soft sealing: IEC leakage class VI Bellow sealing (option) seamless, double walled, made of , option: Hastelloy and other materials Heating jacket (option) Connections DN 15 PN 40 (1/2 ANSI ) flanges Low temperature design (option) Down to -196 C Materials Body Materials Bonnet Materials EN Temperature range ASTM Temperature range GP240GH* -10 to C A 216 WCB* -29 C to C G-X 5 CrNiMo to C A 351 CF8M* -196 C to C GX5CrNiMoNb * -10 to 450 C G20Mn5-40 to C A 352 LCB -50 C to C GX3CrNi to C G17CrMo to 530 C A 217 WC6-29 C to 530 C Same material as body, stuffing box sleeve made of (AISI 316TI) Trim material Material Parabolic Perforated plug L1 Seat Seat sealing Max. fluid temperature No * nitrided * metallic same as stem sealing * nitrided * metallic same as stem sealing hardened hardened hardened metallic same as stem sealing * nitrided * PTFE/FKM -50 ~ 160 C * nitrided * PTFE/FKM -50 ~ 160 C hardened hardened hardened PTFE/FKM -50 ~ 160 C * nitrided * PTFE/ -50 ~ 140 C * nitriert * PTFE/ -50 ~ 140 C hardened hardened hardened PTFE/ -50 ~ 140 C * nitrided * PTFE -196 ~ 180 C * nitrided * PTFE -196 ~ 180 C hardened hardened hardened PTFE -196 ~ 180 C * Standard _gb_ doc - subject to technical data modification - Page 1 of 6
2 Temperature range for stem sealings Sealing type Packing Ring (Item A) Micro sealing (Item B) O-Ring (Item C) Wiper ring (Item D) Temp. range Top flange design Remarks Maintenance free double sealing adjustable PTFE V-Ring reinforced Graphite/ Inconel - - NBR NBR -25 ~ 180 () C Standard -29 ~ C Standard/ Cooling fins preloaded c/w stainless steel Standard operation adjustable Pure Graphite - - VITON -29 ~ 530 C Standard/ high temperature Cooling fins Braided adjustable Graphite/ - - NBR -196 ~ C Extended low temperature bonnet PTFE Bellow sealing c/w double safety sealing PTFE V-Ring/ bellow ( or Hastelloy C) NBR -100 ~ C Bellow sealing preloaded c/w stainless steel D C B A Weights and dimensions Dimensions of valves c/w flanges acc. to DIN EN or ANSI Class / RF/RTJ DN ANSI Valve Series 6N Actuator 2) Type 812/811/MA VBL PN10-PN VBL Class RF 450,8 542,9 673,1 736, VBL Class RTJ 463,5 555, VBL Class RF 472,9 568, ,7 927,1 1057,3 1 VBL Class RTJ 488,9 584, DEK DEK DEK VH DEK DEK5 on request DEK ØA AH AHV weight* ca. kg 16 DEK VU MFIII On request 2) Actuator type for DN500/ 20 on request *) valve c/w actuator w/o hand wheel UV 530 MA MFIII 625 UV MA MFIII 888 UV B 340 MFIII UV MA _gb_ doc - subject to technical data modification - Page 2 of 6
3 Standard kvs/ Cvs and seat diameters of series 6N (not balanced) kvs m³/h Cvs gal/min Characteristics Parabolic Perforated Parabolic Perforated _gb_ doc - subject to technical data modification - Page 3 of 6
4 Max. shut off differential pressures (valve closed) (PTFE packing (V-Ring), leakage class IV, w/o balancing, flow-to-open) Actuator series 812 Air to close / to open No. of s No. of s Type MFIII - 60 (multi- actuator) p instrument air, min bar bar 3,0 4,5 6,0 4,5 6,0 90 4,9 12,7 17,4 22,2 14,0 31,0 47,9 14,0 31, ,7 7,7 10,7 13,7 8,5 19,3 30,1 8,5 19, ,4 4,5 6,4 8,3 5,0 11,7 18,5 5,0 11, ,7 7,7 10,7 13,7 8,5 19,3 30,1 8,5 19, ,4 7,7 6,4 8,3 5,0 11,7 18,5 5,0 11, ,8 2,9 4,2 5,5 3,3 7,9 12,6 3,3 7,9 Actuator series 811 Type UV-60 (single- actuator) Air to close / to open standard reinforced standard reinforced Min. Max. Min. Max. p instrument air, min bar bar bar bar bar 3,0 4,5 6,0 4,5 6, ,2 35,8 48,6 50,0 50,0 50,0 50, ,8 22,4 30,5 50,0 50,0 36,5 50, ,1 13,7 18,7 32,2 45,8 22,5 36, ,8 22,4 30,5 50,0 50,0 36,5 50, ,1 13,7 18,7 32,2 45,8 22,5 36, ,7 9,3 12,7 22,0 31,4 15,4 24,7 Actuator series 811 Type UV-100 (single- actuator) Air to close / to open standard reinforced standard reinforced Min. Max. Min. Max. p instrument air, min bar bar bar bar bar 3,0 4,5 6,0 4,5 6, ,3 6,8 17,3 30,7 44,2 22,3 35, ,1 4,5 11,8 21,1 30,4 15,2 24, ,1 2,6 7,0 12,7 18,4 9,1 14, ,1 4,5 11,8 21,1 30,4 15,2 24, ,1 2,6 7,0 12,7 18,4 9,1 14, ,5 1,4 4,1 7,6 10,0 5,4 8, ,1 2,6 7,0 12,7 18,4 9,1 14, ,5 1,4 4,1 7,6 10,0 5,4 8, ,3 1,1 3,3 6,1 8,9 4,3 7,1 Actuator series 811 Type UV-120 (single- actuator) Air to close / to open standard reinforced standard reinforced Min. Max. Min. Max. p instrument air, min bar bar bar bar bar 3,0 4,5 6,0 4,5 6, ,5 4,1 7,6 11,0 5,4 8, ,3 3,3 6,1 8,9 4,3 7, ,9 3,6 5,3 2,5 4,2 For higher differential pressures, balanced trim is required. Please contact ARCA! _gb_ doc - subject to technical data modification - Page 4 of 6
5 Max. shut off differential pressures (valve closed) (PTFE packing (V-Ring), leakage class IV, w/o balancing, flow-to-open) Actuator series MA60.D No. of s Air to close / to open No. of s (multi- actuator) p instrument air, min bar bar 3,0 4,5 6,0 4,5 6, ,7 28,4 44,2 50,0 50,0 50,0 50, ,7 17,7 27,7 37,6 47,6 50,0 50, ,5 10,7 17,0 23,2 29,4 41,9 50, ,7 17,7 27,7 37,6 47,6 50,0 50, ,5 10,7 17,0 23,2 29,4 41,9 50, ,9 7,2 11,5 15,8 20,2 28,8 37, ,5 10,7 17,0 23,2 29,4 41,9 50, ,9 7,2 11,5 15,8 20,2 28,8 37, ,4 3,9 6,4 8,7 11,8 18,6 25, ,9 7,2 11,5 15,8 20,2 28,8 37, ,4 3,9 6,4 8,7 11,8 18,6 25, ,7 2,2 3,7 5,2 7,0 11,2 15, ,4 3,9 6,4 8,7 11,8 18,6 25, ,7 2,2 3,7 5,2 7,0 11,2 15, ,5 1,7 2,9 4,1 5,6 9,0 12, ,7 2,2 3,7 5,2 7,0 11,2 15, ,5 1,7 2,9 4,1 5,6 9,0 12, ,4 0,9 1,3 3,3 5,4 7,5 - - _gb_ doc - subject to technical data modification - Page 5 of 6
6 ECOTROL 6N type code 0. Operating Conditions 7. Body materials (cont.) 16. Seat/ plug seal Fluid: 6 A216WCB 0 Leakage class IV (metal to metal) Temp.: C 7 A351CF8M 1 Leakage class V (metal, super finished) Press. P 1 : bar abs 8 A217WC6 2 Soft sealed (PTFE/) Press. P 2 : bar abs 9 other (in acc. with order) 3 Soft sealed (PTFE/FKM) 1. Series 8. Guiding 4 Soft sealed (PTFE/ trapezoidal) 6N 0 Stem guided (standard 9 other (in acc. with order) 2. Bonnet 1 Bottom guided 17. Cage Retainer 1 Standard 9 other (in acc. with order) 0 Standard 2 Double stuffing box 9. kvs 1 LN (Low Noise), not controlled 3 Cooling fins xxx in acc. with order 2 LN controlled 4 Bellows 10. Characteristics 9 other (in acc. with order) 5 Extension (insulating column) l Linear 18. Low noise cage 7 Standard balanced g =% 1 LK1 8 Cooling fins balanced m modified 2 LK2 9 Special design in acc. with order s On/ Off 3 LK3 3. design 11. materials 4 LK4 P1-P3-P5 Parabolic plug (1-3-5 step) SLK1 L1-L2-L3 Perforated plug (1-2-3 step) SLK2 S On/ Off plug other (in acc. with order) 4. Nominal diameter (DN) DIN/ ANSI 9 other (in acc. with order) 19. Stem sealing DN / ANSI wear/ tear protection 1 PTFE/V-Ring/ quad ring DN / ANSI 8 0 Standard (w/o) 2 PTFE/V-Ring/VITON quad ring DN / ANSI 10 1 nitrided 3 Latty 6118/ETF Inconel DN / ANSI 12 2 hardened 4 Graphite 0901 DN / ANSI 14 3 face stellited 5 Graphite/PTFE 6226/6232 DN / ANSI 16 4 Completely stellited 9 other (in acc. with order) 500 DN 500 / ANSI 20 5 Colsterised 20. special design 5. Nominal pressure (PN) 9 other (in acc. with order) 0 Standard 10 PN 10 1 AD0 16 PN Balancing 2 NACE 40 PN 40 1 Piston rings 3 Oxygen design Class acc. to ANSI B quad ring 9 other (in acc. with order) Class acc. to ANSI B FKM- quad ring 6. Connections 5 PTFE loaded 21. Material inspection (pressure retaining parts) 0 Flanges c/w sealing strip RF SF 9 other (in acc. with order) 0 w/o 1 Flanges c/w groove 14. Seat materials 1 EN Flanges c/w tongue EN Flanges c/w projection/ recess EN Butt weld ends other (in acc. with order)) 5 Butt weld ends c/w spool pieces 9 other (in acc. with order) 22. Final inspection 7 RTJ 15. Seat wear/ tear protection 0 w/o 9 other (in acc. with order) 0 standard (w/o) 1 EN Body materials 1 nitrided 2 EN hardened 3 EN Seat face stellited 4 EN Completely stellited 9 other (in acc. with order) Colsterised 9 other (in acc. with order) in accordance with customer s specification, or selected by manufacturer in accordance with customer s specification (fluid, pressure, etc.) Example: 6N - 1 P Position 1-7 / basic data Series 6N c/w standard bonnet c/w parabolic plug - DN PN40 flanges acc. to EN1092 B1 body g Position 8-19 / trim Single stem guiding kvs equal percentage plug made of w/o wear/tear protection w/o balancing seat made of w/o wear/ tear protection leakage class IV cage retainer standard w/o low noise cage stem sealing PTFE-V-Ring/ quad ring position / Design/ inspections Standard design Material inspection acc. to EN Final inspection acc. to EN _gb_ doc - subject to technical data modification - Page 6 of 6
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
BSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ARI-STEVI 440 / 441 (DN15-250) Control valve - straight through With pneumatic and electric actuators
ARI-STEVI 4 / 441 (DN15-0) Control valve - straight through With pneumatic and electric actuators ARI-STEVI 4 / 441 Pneumatic actuator ARI-DP 32-34 Tri Reversible pneumatic actuator Actuator with rolling
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
ON-OFF free flow valves Series MVMFL/BW
Series MVMFL/BW Technical data Size () Rating Connections Plug characteristic Action Temperature 15-25 PN 16 Butt weld (BW) Parabolic linear Manual handwheel from -30 to +150 C Description Manual micro-valve
Cryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
Diaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
WOUTER WITZEL EUROVALVE. Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve
Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve 2 WOUTER WITZEL EUROVALVE Dynaxe sets the new standard for double-offset butterfly valves. It is the
SWI BALL VALVES. High Integrity Top Entry Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
SWI BALL VALVES Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM We Manufacture Critical S ervice Valves For The Worlds Industries 1 2 TOP ENTRY TRUNNION MOUNTED
Baumann 16, 32, 54, and 70 Pneumatic Actuators
Baumann Pneumatic s Product Bulletin Baumann 16, 32,, and 70 Pneumatic s Baumann actuators are single acting, pneumatic actuators with spring-return action. They are compact, multi-spring actuators with
NELES TOP ENTRY, ROTARY CONTROL VALVE, SERIES TOP 5
NELES TOP ENTRY, ROTRY CONTROL VLVE, SERIES TOP 5 Metso's Neles T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petro-chemical and refining industries with improved
Fisher Cavitrol III One, Two, and Three Stage Trims
Cavitrol III Trims D0096X0 Product Bulletin 80.:00 September 07 Fisher Cavitrol III One, Two, and Three Stage Trims Cavitrol III trims (figures,, and ) are used for cavitating liquid applications in various
KEYSTONE SWING TYPE WAFER CHECK VALVE FIGURE 86
High capacity, spring loaded swing type wafer check valve FEATURES Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long High flow capacity featuring a special
KLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
With World Class Quality
Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler
Diaphragm seal with flange connection With internal diaphragm Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm Model 990.26 WIKA data sheet DS 99.26 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN
DISCOCHECK Dual-Plate Check Valves BB Short overall length according to DIN EN 558-1, table 11, series 16 (=^ DIN 3202, part 3, series K3)
pplication and Type PN pplication for liquids, gases and vapours Ø D 80 BB EN BB SME PN Class 150 suitable for heating, air-conditioning, water supply and cooling installations,for applications where minimum
Run with higher performing, more versatile flow control.
Run with higher performing, more versatile flow control. Fisher easy-e Globe Valves Maximize your flow control options with these workhorses of the process control industry. You need less complexities
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
GD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /
DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
94130 Pressure Relief Vent (Open or Closed Vent Option) Features
94130 (Open or Closed Vent Option) The Shand & Jurs 94130 is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily serviceable configuration and
McCANNA Ball Valves for Purified Terephthalic Acid Services
flowserve.com McCANNA Ball Valves for Purified Terephthalic Acid Services Experience In Motion 1 McCANNASEAL Valves Meet the Challenges of Purified Terephthalic Acid (PTA) Processes With its vast experience
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
VERIS Accelabar. Superior Flow Measurement Accuracy
VERIS Superior Flow Measurement Accuracy Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. ...A New Idea in Flow
Weir Valve Selections
Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
brands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
Control Valves for power plants and process plants
Control Valves for power plants and process plants SCHROEDAHL international The expert for developing and manufacturing individual high-quality valves for a wide range of power plant and industrial applications.
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
Immersion Assembly for ph and Redox Sensors DipFit P CPA 140
Technical Information TI 178C/07/en No. 5008898 Immersion Assembly for ph and Redox Sensors DipFit P CPA 10 Immersion assembly with flange connection for demanding processes. Sensor holder with bayonet
Butterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
Packing for Sliding-Stem Valves
August 1999 Bulletin 59.1:060 Packing for Sliding-Stem Valves This bulletin will guide you in selecting standard Fisher Controls valve stem packing materials and packing box arrangements. Packing materials
Valbart Through Conduit Slab Gate Valve (TCSGV)
Valbart Through Conduit Slab Gate Valve (TCSGV) The Oil and Gas Industry s Choice for Liquid and Gas Applications Experience In Motion Flowserve Solutions to Keep You Flowing Flowserve is one of the world
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
VALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
AVK NEDERLAND INDUSTRIAL VALVES & FITTINGS MAKING A DIFFERENCE INDUSTRIAL 1
AVK NEDERLAND INDUSTRIAL MAKING A DIFFERENCE INDUSTRIAL 1 AVK NEDERLAND INDUSTRIAL AVK Group The AVK Group is a privately owned industrial group that currently comprises 90 companies. AVK s core business
BULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
PSG, TSG, SGS, SR Corrosion-resistant PFA and PTFE lining Indication of flow even at very low flow rates Optionally with integrated check valve
Richter and -Way Sight Glasses PSG, TSG, SGS, SR Corrosion-resistant PFA and PTFE lining Indication of flow even at very low flow rates Optionally with integrated chec valve Richter and -way sight glasses
Product Range. Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size. Gate Valve Globe Valve Check Valve. API 600 & B16.34 Bolted Bonnet Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 API 600 & B16.34 Bolted
DISTRIBUTED VALVES. DEMCO Gate Valves DEMCO
Gate Valves 2 TABLE OF CONTENTS Gate Valves Introduction... 4 Series DM Gate Valves... 5 Series DM 7500 Gate Valves... 7 Series DT/DB Gate Valves... 9 PRODUCT SPECIFICATIONS General Technical Information...
M-CLASS. Metal seated ball valves
M-CLASS Metal seated ball valves Lockable tee-handle, gearbox and actuated options Patented tripod mounting bracket with ISO 5211 option for simple and precise actuator mounting Oversized stem to prevent
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
Page 01 GLOBE CONTROL VALVE. Double seated globe valve, top and bottom guided. Single seated globe valve, top guided. Series GD.
Page 01 GLOBE CONTROL VALVE GU Single seated globe valve, top guided GD Double seated globe valve, top and bottom guided Single seated, top guided : 1/2-6 Rating : ANSI Class 150# - 4500# Connections :
Pneumatic control and on/off valves for thermoelectric plants
BASIC REQUIREMENTS FOR QUALIFYING SUPPLY AND CONTRACTING COMPANIES Equipment category : FMVA11 Pneumatic control and on/off valves for thermoelectric plants Technical characteristics Page 1 of 8 CONTENTS
CONA -Universal ANSI / CONA -Connector ANSI
CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal
Printing Version: for optimal viewing set the print to A3 and print two pages of the catalogue (including this one) on each sheet.
Printing Version: for optimal viewing set the print to A3 and print two pages of the catalogue (including this one) on each sheet. CUSTOM-MADE WATERWORKS VALVES SINCE 1967 Table of Contents The company
Pneumatic butterfly valve
Pneumatic butterfly valve R V Specialized manufacture, Specialized service, RFS valve devote to satisfy user s expectation, improving service quality continuously. keeping improving. Ordering Code R V
diaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
Metal Seated Ball Valves
VALVES AND PIPELINE SUPPLIES Metal Seated Ball Valves FAST TRACK SUPPLY CLASS V & VI SHUT OFF The production of a zero maintenance, high performance metal seated valve has been the goal of many engineers.
Ball Float Steam Trap UNA 38, PN 100/CL 600, DN UNA 39, PN 160/CL 900/CL 1500, DN 15-50
Data Sheet 88620-0 Issue Date: 0/7 Ball Float Steam Trap, PN 00/CL 600, DN 5-50, PN 60/CL 900/CL 500, DN 5-50 h Rear view Description UNA 3.. are steam traps with ball float and needle valve for high-pressure
Fisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
Product lines: Concentric butterfly valves Double offset valves High performance butterfly valves Knife gate valves Check valves Diaphragm valves
GRIP THAT HOLDS Product lines: Concentric butterfly valves Double offset valves High performance butterfly valves Knife gate valves Check valves Diaphragm valves Ball valves Plug valves Ball check valves
Threaded Swing Check Valves
ISO 9001:2000 Certifi ed Certifi cate No. C2007-01814 Carbon Steel - Ductile Iron Swing Check Valve manufactured in compliance with: ASME B3.1 Pipe Threads Limited Compliance to: ASME B&PVC Sections 2
We Offer Both Cast Ball Valves & Forged Ball Valves.
11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port
premier valves product selector premier valves product selector
premier s product selector premier s product selector Premier Valves Product Selector Discover A World with a Full Line of Products south africa Premier Valves (PV) has been manufacturing and supplying
Engineering Data Pack HD Industrial Duty Pumps
Engineering Data Pack HD Industrial Duty Pumps Version. Excellence at work. Excellence in life. Table of Contents 0A Pump Mounting Dimensions 0A Pump Mounting Dimensions with Flanged Ports Flanged Port
ASME VALVE BODY MATERIAL TYPES/EQUIVALENTS & PRESSURE/TEMPERATURE RATINGS
VALVE BODY MATERIAL TYPES/EQUIVALENTS & PRESSURE/TEMPERATURE RATINGS Menu Valve Shell ASTM Specifications Pages 2 to 7 Pressure- Temperature Ratings Pages 8 to 11 Page 1 9-15 Boolcunda Avenue Salisbury
TABLE OF CONTENTS STANDARDS IN THE VALVE AND PRESSURE RELIEF INDUSTRY 1 ABBREVIATIONS USED IN THE VALVE & PRESSURE RELIEF INDUSTRY 2
TABLE OF CONTENTS STANDARDS IN THE VALVE AND PRESSURE RELIEF INDUSTRY 1 ABBREVIATIONS USED IN THE VALVE & PRESSURE RELIEF INDUSTRY 2 DEFINITIONS FOR THE PRESSURE RELIEF INDUSTRY 3 PRESSURE RELIEF DEVICE
1/2 2-1/2 (DN 15 65) STANDARD PORT AND 1/2 2 (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
1/ -1/ (DN 1 ) STANDARD PORT AND 1/ (DN 1 ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The JAMESBURY Series 000 ball valves offer the three most desirable attributes of high-quality
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com
WILLBRANDT PTFE Expansion Joint Type 80
WILLBRANDT PTFE Expansion Joint Type 0 00 Type 0 is a 3 or corrugated PTFE expansion joint that is hotformed under pressure from extruded PTFE tubing. The fibers are executed without interruption. It is
Bolted Three Piece Forged Steel TRUNNION BALL VALVE
Bolted Three Piece Forged Steel TRUNNION BA VAV Trunnion Valve Features: Forged -piece construction Fire safe design ouble block and bleed design C.S. trim with mil NC ISO mounting pads Sealant injection
FPD190 Differential pressure restriction orifice plates
Data sheet DS/FPD190 EN FPD190 Differential pressure restriction orifice plates Limits the flowrate or reduces the pressure of liquids, gases and steam Measurement made easy Orifice plate for flow restriction
Isolation Gaskets 101
Isolation Gaskets 101 Discussion Outline Isolation Gasket Basics Product Offering Gasket Terms & Definitions Materials & Applications Standards & Codes Isolation Gasket Basics ISOLATION GASKET Isolation
PARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
HIGH SEAL ULF Live Loaded Packing System
Instruction Manual HIGH-SEAL Live-Loaded Packing HIGH SEAL ULF Live Loaded Packing System Contents Introduction... 1 Scope of Manual... 1 Description... 2 Spring Selection... 3 Installation... 3 Parts
Worcester 5 Series. BS 5351 Approved Flanged Ball Valves
Worcester 5 Series S 5351 pproved Flanged all Valves Flowserve Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15 - sizes of the proven Series
TSK S 3. Flap Flowmeter for liquids. Range: m 3 /h. Accuracy: ± 2.0 of reading. : PN 40, t max: C. p max
Flap Flowmeter for liquids measuring monitoring analysing TSK Range: 0.5-3.5 200-1500 m 3 /h Accuracy: ± 2.0 of reading p max : PN 40, t max: -40 +300 C Connection: wafer flange DN 25 500 Material: stainless
PBV Ball Valves. Severe Service Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
PBV Ball Valves Severe Service Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 56-59-400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At Forum Energy Technologies
THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES
THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES The manufacturer guarantees only English text. Available on our web site:
Flange Insulation Sets
Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as a galvanic cell and reduce the risk of galvanic
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications : Ductile iron disc All positions Low
Industry Leading Innovation. Family of 4000's FLANGED BALL VALVES SERIES
Industry Leading Innovation Family of 4000's FLANGED BALL VALVES 4000 SERIES Industry Leading Innovation QUALITY STATEMENT American Valve commits itself to consistently fulfilling our customers' needs
Monolithic Isolation Fittings
Monolithic Isolation Fittings The Industry s Dual O Ring Seal Standard Tests Include: 100% Hydrostatic Pressure & Electrical Tests 100% Ultrasonic of Welds 100% Magnetic Particle of Welds 100% Dye Penetrant
CONTROL VALVE SOURCEBOOK PULP & PAPER
CONTROL VALVE SOURCEBOOK PULP & PAPER Copyright 2011 Fisher Controls International LLC All Rights Reserved. Fisher, ENVIRO-SEAL, Whisper Trim, Cavitrol, WhisperFlo, Vee Ball, Control Disk, NotchFlo, easy
Ref RESILIENT SEAT GATE VALVE ISO PN10-16 F4. Model/Ref:
Model/Ref: 180-181 - 182 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 ISO PN10/16 flanges - 10 C + 110 C with EPDM wedge Max Pressure : 16 Bars up to DN400,
Connect with Quality. Flange Insulation Sets
Connect with Quality Flange Insulation Sets Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as
WEAR AND CORROSION RESISTANT BALL VALVES. System solutions with ceramic components
WEAR AND CORROSION RESISTANT BALL VALVES System solutions with ceramic components 2 Wear protection in the toughest operating conditions Conventional materials in valves can reach their limits in many
ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
1 of 5. Benesome Sealing Sdn. Bhd. Neoprene Rubber, EPDM, NBR, HG EPDM, Metallic Strip. Neoprene Rubber EPDM HG EPDM NBR.
Benesome Sealing Sdn. Bhd. Neoprene Rubber, EPDM, NBR, HG EPDM, Brand Neoprene Rubber Neoprene Rubber EPDM HG EPDM NBR White Neoprene Neoprene With Insertion Red Rubber Rough Rubber Metallic Strip Shape