CURRICULUM VITAE (Last Update: ) Dr. Mohammadjafar Hadad

Transcription

1 CURRICULUM VITAE (Last Update: ) Dr. Mohammadjafar Hadad NAME: DATE OF BIRTH: 8 th Sep mjhadad@profs.semnan.ac.ir m_j_hadad@yahoo.com (m.j.hadad@gmail.com) PRESENT POSITION: From Oct.2013: Assistant Professor, Manufacturing Engineering group- Mechanical Engineering Department, Semnan University, Iran. Jan.2013-Oct.2013: Research assistant, Institute of Grinding Technology & Super-finishing (KSF), FH Furtwangen University, Germany : Assistant Professor, Manufacturing Engineering group- Mechanical Engineering Department, Semnan University, Iran. EDUCATION: : Research assistant, Institute of Grinding Technology & Super finishing (KSF), FH Furtwangen University, Germany. Projects: Simulation of minimum quantity lubrication-mql grinding Process, New concepts of grinding and precision machining processes, New T-dress concept. o Supervisor: Prof. T. Tawakoli (Prof. of Manufacturing Engineering Division, Competence Center of Grinding Technology & Superfinishing (KSF), Furtwangen University, Germany) 1

2 : PhD Degree from Tarbiat Modares University, Manufacturing Engineering, Manufacturing Division, GPA=17.23/20. Ph.D. Project: Minimum Quantity Lubrication-MQL Grinding Process & Investigation of Surface Quality. (No.19.5/20 with excellent degree) o Supervisor: Prof. M.H. Sadeghi (Prof. of Manufacturing Engineering Division, Tarbiat Modares University) o First Super advisor: Prof. T. Tawakoli (Prof. of Manufacturing Engineering Division, Competence Center of Grinding Technology & Super finishing (KSF), Furtwangen University) o Second Super advisor: Prof. M. Maerefat, Prof. of Heat and Fluid Section, Department of Mechanical Engineering, Tarbiat Modares University) : MSc Degree from Isfahan University of Technology, Manufacturing Engineering, Manufacturing Division, GPA=18.10/20. M.Sc. Project: Development of the Cylindrical Wire Electrical Discharge Turning (CWEDT), Material Removal Rate & Surface Integrity & Roundness. (No.20/20) o Supervisor: Prof. A. Fadaei Tehrani (Prof. of Manufacturing Engineering Division, Isfahan University of Technology) o Super advisor: Dr. N. Nehzat (Assist. Prof. of Manufacturing Egineering Division, Isfahan University of Technology) : BSc Degree from Isfahan University of Technology, Manufacturing Engineering, Manufacturing Division, GPA=14.45/20. B.Sc. Project title: Programming and Assembly of CNC grinding Machines. (No.19.5/20) o Supervisor: Dr. S.M. Safavi (Assist. Prof. of Manufacturing Engineering Division, Isfahan University of Technology) 1998 Pre University: Certificate,GPA=18.31/ High School: Diploma mathematics and physics, GPA=18.46/20. 2

3 AWARDS & HONORS: Special award from the Isfahan University of Technology (IUT) for the best MSc thesis from 2003 until 2007 in mechanical engineering in the IUT, 2008 Second in the test for entering Tarbiat Modares University among about 200 participants in PhD Degree (2006) Second Grade in MSc Degree between the others manufacturing students, (GPA=18.10/20). 94th in national test for entering Master of Science Degree (2004) 4th in national test for entering Independent university in Master of Science Degree (2004) 1012th in national test for entering university among about 300,000 participants in B.Sc. Degree (1999) PATENT: Design and produce of micro lubricant cooling (MQL) system with minimum of cutting fluid, 2009, INSF PUBLICATIONS: Book: S.M. Safavi, M.J. Haddad, Fundamentals of Jig and Fixture Design, in Persian, 2006, Isfahan University of Technology s Jahad Daneshgahy s Press, ISBN: ISI Journal Papers: 1) T. Tawakoli, M.J. Hadad, M.H. Sadeghi, A. Daneshi, S. Stöckert, A. Rasifard, (2009), An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication MQL grinding, International Journal of Machine Tools & Manufacture, 49, ) T. Tawakoli, M.J. Hadad, M.H. Sadeghi, (2010) Investigation on minimum quantity lubricant-mql grinding of 100Cr6 hardened steel using different abrasive and coolant-lubricant types, International Journal of Machine Tools & Manufacture, 50,

4 3) T. Tawakoli, M.J. Hadad, M.H. Sadeghi, (2010) Influence of oil mist parameters on minimum quantity lubrication-mql grinding process, International Journal of Machine Tools & Manufacture, 50, ) T. Tawakoli, M.J. Hadad, M.H. Sadeghi, A. Daneshi, B. Sadeghi (2011) Minimum quantity lubrication in grinding: Effects of abrasive and coolant-lubricant types, Journal of Cleaner Production, 19, ) T. Tawakoli, M.J. Hadad, A. Daneshi, M.H. Sadeghi, B. Sadeghi (2011) Study on the effects of abrasive and coolant-lubricant types on minimum quantity lubrication-mql grinding, Advanced Materials Research, 325, ) M.H. Sadeghi, M.J. Haddad, T. Tawakoli, M. Emami, (2009) Minimal quantity lubrication-mql in grinding of Ti-6Al-4V titanium alloy, International Journal of Advanced Manufacturing Technology, 44, ) M.H. Sadeghi, M.J. Hadad, T. Tawakoli, A. Vesali, M. Emami, (2010), An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-mql technique, International Journal of Material Forming, 3, ) M.J. Haddad, A. Fadaei Tehrani, (2008) Investigation of Cylindrical Wire Electrical Discharge Turning (CWEDT) of AISI D3 Tool Steel Based on Statistical Analysis, Journal of Materials Processing Technology, 198, ) M.J. Haddad, A. Fadaei Tehrani, (2008) Material removal rate (MRR) study in the Cylindrical Wire Electrical Discharge Turning (CWEDT) process, Journal of Materials Processing Technology, 199, ) M.J. Haddad, F. Alihoseini, M. Hadi, M. Hadad, A. Fadaei Tehrani, A. Mohammadi, (2010) An experimental investigation of cylindrical wire electrical discharge turning process, International Journal of Advanced Manufacturing Technology, 46,

5 11) M.J. Haddad, M. Tajik, A. Fadaei Tehrani, A. Mohammadi, M. Hadi, (2009) An experimental investigation of cylindrical wire electrical discharge turning process using Taguchi approach, International Journal of Material Forming, 2, ) M.J. Hadad, T. Tawakoli, M.H. Sadeghi, B. Sadeghi, (2012) Temperature and energy partition in minimum quantity lubrication- MQL grinding process, International Journal of Machine Tools & Manufacture, 54, ) M.J. Hadad, M. Hadi, (2013) An investigation on surface grinding of hardened stainless steel S34700 and aluminium alloy AA6061 using minimum quantity lubrication-mql technique, International Journal of Advanced Manufacturing Technology, accepted for publication, /s , available online. 14) M.J. Hadad, B. Sadeghi (2013) Minimum quantity lubrication-mql turning of AISI 4140 steel alloy, Journal of Cleaner Production, 54, ) M.J. Hadad, B. Sadeghi, (2012) Thermal analysis of minimum quantity lubrication-mql grinding process, International Journal of Machine Tools & Manufacture, 63, ) F. Rabiei, A.R. Rahimi, M.J. Hadad, M. Ashrafijou, (2013) Investigation of the effect of Minimum Quantity lubrication technique on grinding of HSS, The Modares Journal of Mechanical Engineering, 13(4), Conference Papers: 1) M.J. Haddad, A. Fadaei Tehrani, A. Mohammadi, F. Alihoseini, M.H. Sadeghi, A study on surface roughness, roundness and material removal rate in Cylindrical Wire Electrical Discharge Turning (CWEDT) based on statistical analysis, 4th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, Cesme, TURKEY, CIRP 21-23/6/2007". 5

6 2) Mohammad Jafar Haddad, Alireza Fadaei Tehrani, Aminollah Mohammadi, Application of Taguchi method in the optimization of MRR, Ra and roundness of Cylindrical Wire Electrical Discharge Turning (CWEDT), 15th. Annual (International) Conference on Mechanical Engineering-ISME2007, May 15-17, 2007, Amirkabir University of Technology, Tehran, Iran. 3) M.J. Haddad, A. Fadaei Tehrani, A. Mohammadi, N. Nehzat Experimental Study of Cylindrical Wire Electrical Discharge Turning (CWEDT) Process, Part1: MRR, 2nd. Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Tehran, Iran. 4) M.J. Haddad, A. Fadaei Tehrani, A. Mohammadi, N. Nehzat Experimental Study of Cylindrical Wire Electrical Discharge Turning (CWEDT) Process, Part2: Ra and Roundness, 2nd. Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Tehran, Iran. 5) A. Farhadi, A. Fadaei Tehrani, M.J. Haddad, A. Mohammadi, Effects of machining parameters on cutting force and surface roughness of the superalloy Inconel 738, 2nd. Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Tehran, Iran. 6) M.H. Sadeghi, M.J. Haddad, T. Tawakoli, M. Emami, An experimental investigation on the effect of minimum quantity lubrication on surface quality in grinding of Ti-6Al-4V, The International Conference on ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT 2008), 2-5 November 2008, Manama, Kingdom of Bahrain. 7) M.H. Sadeghi, M. Emami, M.J. Haddad, T. Tawakoli, The influence of minimum quantity of lubrication (MQL) on cutting forces in grinding Ti6Al4V titanium alloy, The International Conference on ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT 2008), 2-5 November 2008, Manama, Kingdom of Bahrain. 8) M.J. Haddad, A. Fadaei Tehrani, A. Mohammadi, Statistical Analysis of the Influence of EDM Parameters on Surface Roughness and Roundness in Cylindrical Wire Electrical Discharge Turning Process, The International Conference on ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT 2008), 2-5 November 2008, Manama, Kingdom of Bahrain. 6

7 9) M.J. Haddad, A. Fadaei Tehrani, A. Mohammadi, A Taguchi approach and experimental investigation into the optimal processing conditions for the Cylindrical Wire Electrical Discharge Turning Process, The International Conference on ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT 2008), 2-5 November 2008, Manama, Kingdom of Bahrain. 10) M.J. Haddad, M. Hadi, M.M. Mohammadi, Experimental Investigation of the Effects of Machining Parameters on Surface Roughness and Roundness in the Cylindrical Wire Electrical Discharge Turning (CWEDT) of AISI D3 Tool Steel, 1st Mediterranean Conference on Intelligent Systems and Automation, June, 30- July, 2, 2008, Hotel Seybouse, Annaba, Algeria. 11) S. Kolahdouz, B. Arezou, M.J. Haddad, Definition of Johnsoncook parameter and application of this parameter on Modelling of surface residual stress in the orthogonal machining (metal cutting) in gamma titanium aluminide, The International Conference on Advanced Manufacturing and Automation (INCAMA2009), March 26-28, 2009, India. 12) M. Hadi, M.J. Haddad, Improvement of preform for reducing forging process by combination of neural network and genetic algorithm, (in Persian), National Manufacturing Engineering Conference, February 20-21, 2008, Azad University, Branch of Najafabad, Isfahan, Iran. 13) M. Emami, M.H. Sadeghi, M.J. Haddad, Minimum Quantity Lubrication in Grinding, National Manufacturing Engineering Conference, February 20-21, 2008, Azad University, Branch of Najafabad, Isfahan, Iran. 14) T. Tawakoli, M.J. Hadad, A. Daneshi, M.H. Sadeghi, B. Sadeghi, Study on the effects of abrasive and coolant-lubricant types on minimum quantity lubrication-mql grinding, ISAAT 2011, Stuttgart, Germany. 15) B. Sadeghi, M.J. Hadad, M.R. Safari, Functional Asymptotic Linearity Theorem Applied To Carbon Nanotubes, in Persian, ISME2013, Tehran. Iran. 16) F. Rabiei, A.R. Rahimi, M.J. Hadad, M. Ashrafijou, Investigation of the effect of workpiece material on performance 7

8 ACTIVITIES: of minimum quantity lubrication-mql grinding, in Persian, ISME2013, Tehran. Iran. Research and Industrial projects: Co-working in Cold Rolls manufacturing project in Isfahan Alloy Steel Complex (Isfahan) ( ) Using Design of Experiment (DOE) & statistical methods for higher quality engineering in Mobarekeh Steel Complex (Isfahan) ( ) Investigation of the various machining parameters on the improvement of roll grinding performance in Mobarakeh Steel Complex (Isfahan) ( ) An investigation on surface grinding of hardened stainless steel S34700 and aluminium alloy AA6061 using minimum quantity lubrication-mql technique, Islamic Azad University-Dehaghan Branch, ( ) Modeling of temperature in dry and Minimum Quantity Lubrication-MQL Turning process, Islamic Azad University-Dehaghan Branch, ( ) Investigation on the development of abrasive belts for super-finishing process, Company KWH Mirka Ltd (Finland) and KSF (Germany), 2013 Dry grinding of crankshafts, KSF (Germany), 2013 Dry grinding of HSS and Hard metal tools applying structured resin bond CBN and Diamond grinding wheels, KSF (Germany), 2013 Shoe grinding; concepts, analysis, application and development, KSF (Germany), 2013 Technical & Teaching Experiences: Training in DANOBAT Company (Spain): Programming and Assembly of CNC grinding machines (2003) Training in DANOBAT Company (Spain): measurement systems ( CMM, Laser, ) for controlling and setting of machine tools (2003) Training in Machine Sazy (Tabriz-Iran): Programming and Assembly of CNC machines (2003) 8

9 Co-working in Ehdas Sana at Pishrafteh- manufacturer of CNC machine tools (Isfahan) ( ) Training in Patleh Company (designer & manufacturer of machine tools) (Shahreza) (2001) Co-working in Mobarakeh Steel Complex (manufacturer of steel strips) as a Process Engineer in Cold Rolling Mill s Technical Office (Isfahan) ( ) Co-working as academic staff in the Manufacturing Engineering Division, Department of Mechanical Engineering, Azad University, Branch of Dehaghan, Isfahan ( ) Founder and Direct Manager of Royal Sanat Khavaran Co., Designer and Manufacturer of MQL systems ( ) Assistant Professor-Mechanical Engineering Department-Semnan University ( ) Peer-review activities: Journal reviewer for; International Journal of Advanced Manufacturing Technology Journal reviewer for; Journal of Cleaner Production Journal reviewer for; International Journal of Heat and Mass Transfer Journal reviewer for; The Modares Journal of Mechanical Engineering ACADEMIC INTERESTS: Grinding, polishing and super finishing processes Environmentally friendly manufacturing processes Machining processes (conventional and non-conventional) Machine tool design Modeling of manufacturing processes Advanced Manufacturing processes (Micro & Nanotechnology) Manufacturing and metallurgy of Advanced Materials Machining of Advanced Materials Tribology Material Science Design of experiments (DOE) and Statistical analysis Metrology, Design and precision manufacturing 9